Query results in different frame.

I have 3 frames in a frameset. top, middle and bottom. In my
middle frame
called 'mid.asp' I have a textbox with a submit button. This,
when a date is
inserted sends a parameter to a Stored Procedure and returns
a resultset to
a table in bottom.asp.
The trouble is I cannot get bottom.asp to load in the bottom
frame when the
submit button is clicked, it always loads in the middle
frame. Can anyone
tell me where I am going wrong and what I need to do to get
this to work
please.

Did you set the target to bottom in the code that loads it?
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"JED" <[email protected]> wrote in message
news:e9tkv9$4j9$[email protected]..
>I have 3 frames in a frameset. top, middle and bottom. In
my middle frame
>called 'mid.asp' I have a textbox with a submit button.
This, when a date
>is inserted sends a parameter to a Stored Procedure and
returns a resultset
>to a table in bottom.asp.
>
> The trouble is I cannot get bottom.asp to load in the
bottom frame when
> the submit button is clicked, it always loads in the
middle frame. Can
> anyone tell me where I am going wrong and what I need to
do to get this to
> work please.
>

Similar Messages

How to set input ready query cell is different color?

Dear All
Hi, everyone, hereby i have a IP question.
i would like to know, how to set the input ready query's cell different color between those cell which is unable to change value one in workbook..?
Example :
For my workbook which have a input ready query,
i have 4 rows for my input ready query report.
For the first row which is not input ready cell and unable to change any value for the cell, then following rows's cell can be change value,
so, i would like to make first row's color cell different with following row's cell.
In additional, all value of cell is initial zero.
therefore, is there any mehtod to make different color between able cell and unable cell?
Thanks a million.
Regards,
WenLong.

Cells in the input ready query result have different styles given by SAP. All rows will have one style, column headings will have one style whereas input ready cells will have one style. If you are in Excel 2003, put cursor in the input ready cell, goto format -> style, you can see one BeX style attached to that cell, apply watever color you want for that style, save the workbook. If you do this for one cell, it will be applied to all the input ready cells by default. In the same way you can give different color to the non input ready cell styles. In Excel 2007, Cell styles are available in Home -> Cell styles. Here you can see all Bex related styles.

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Query result Alternate row with different color

hello
can anyone help me on a query result.
i wish to have a :
query result Alternate row with different color .
ex.
first row light grey
second row darker grey.
and repeats itself up to the last record/row.
thanks

<tr> <!------------------------------I replaced with
<tr bgcolor="<cfif currentrow mod
2>##D3D3D3<cfelse>##F5F5F5</cfif>">
<td>
#MYARRAY[x][2].CNO#
</td>
<td align="center">
#MYARRAY[x][2].CDCDTt#
</td>
<td>
#MYARRAY[x][2].PADESC#
</td>
<td align="center">
#MYARRAY[x][2].INc#
</td>
<td align="center">
#MYARRAY[x][2].Exp#
</td>
<cfset thirdArray = MYARRAY[x][3]>
<cfif NOT arraylen(thirdArray)>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<cfelse>
<cfloop index="z" from="1" to="3">
<cfif z GT arraylen(thirdArray)>
<td> </td>
<td> </td>
<cfelse>
<td>
#thirdArray[z][2]#
</td>
<td>
#thirdArray[z][3]#
</td>
</cfif>
</cfloop>
<cfif arrayLen(thirdArray) gt 3>
<td nowrap="nowrap">
<cfloop index="z" from="4" to="#arraylen(thirdArray)#">
#thirdArray[z][2]# - #thirdArray[z][3]#<BR />
</cfloop>
</td>
</cfif>
</cfif>
</tr>
I got this error.
Variable CURRENTROW is undefined

Query result different with profit and loss statement

Hi all,
I run query Sum(JDT1.Debit - JDT1.Credit), and then compare the query result with the profit and loss statement, and there is different.
The difference is about 0.01.
At SAP, the Decimal places is set to 2.
I already checked the data, and their amount in 2 decimal.
Do anyone know such problem and what kind of query must I use so the result can be compared with the profit and loss statement ?
Thx.

Riny,
I am glad you found the issue
Suda

CR 4 Ent, Xcelsius and WebI - one query and two different results

Dear Sirs,
I'm using BO 4.0 platform and 3 tools: Crystal Reports for Enterprise, WebI and Dashboard Design (Xcelsius).
I have one question, because in my opinion in this solution is one inconsistency.
I have one table in SQL Server (like below):
IDRec (autoinc) | Col1 (varchar)   | Col2 (int)
1      A    1
2      A    1
3      B    2
4      B    2
I have one universe with ONLY 3 dimensions (IDRec, Col1, Col2). I haven't any measures.
And:
1. Using CR 4 Ent and I create report using 3 dimensions (IDRec, Col1, Col2).
I make sure, that I selected option: "Retrieve duplicate rows"
If I have 3 columns in details I have 4 records (4 rows) in my report, when I have 2 columns (Col1 Col2) I have only 2 records (2 rows) in report (Page view).
So universe (or something like this) use option DISTICT (I think).
2. When I use WebI (14.0.2) I have the same situation.
3. When I use Dashboard Desigm (Xcelsius 2011) I have 4 rows !!! ALWAYS - it doesn't matter I selected "Retrieve duplicate rows" or not !!!
When I look to "View script" window, I not see DISTINCT clause.
Am I doing something wrong?
I can change the settings so as to be able to see duplicate records?
It's very important for some calculation, especially in Crystal Reports (for Enterprise).

Hi,
Thanks for the response...But the result is deviating from the expected..
       expected is
     if we have first query returns              second query returns
              1                                                     4
              2                                                     5
              3                                                     6
     these two queries result should be in one table , with first query result in first column and second query result in second column.
   The two queries fetching data from same table(category table as in my post) with different search criteria( in where clause).......Regards,
Rakesh.

How to open the TFS query results in Excel?

Hello Guys,
Question 1: Is there any way to export the query results from the TFS web browser?
Question 2: Is there any way to export the query results from Team Explorer 2013?
Here is the query results in TFS:
How do I export this result in excel for further analysis?
I have also connected to Team explorer 2013 and right clicked on the query, but there is no option to open the results in Excel, see below:

Hello,
_Pls follow these guide lines for ensuring proper output in Microsoft Excel:
1.First compare the fields properties and the frames properties between the reports created with wizard and the reports created manually.
2. Do not leave any space between two adjacent objects.
Explanation: Because any space, including a few pixels, between two adjacent objects will result in an empty cell or column in Excel output
3.Make sure that the widths of all objects are vertically consistent.
Explanation: If the objects are not exactly aligned vertically, that is, have inconsistent widths, it is likely to result in insertion of unwanted cells/columns in Excel.
4. Pls. Make sure that the vertical elasticity of the frames and repeating frames is not fixed unless you are sure you have allocated enough space to accommodate all the records.
Explanation: If you set the Vertical Elasticity property of a frame to Fixed, the output in Excel will show only as many records as could appear on the first page of the paper output. Since Excel does not have a page concept, it is not able to overflow the remaining rows to the next page.
5. For reliable formatting of spreadsheet output, enclose the whole layout area in a frame.
Explanation: This action prevents the possibility of parallel objects displaying in different vertical positions, one following the other.
Hope this helps.
Regards,
Alex

Best practice for a same query against 2 different tables

Hello all,
I want to extract info about tablespaces storage, both permanent and temporary. For that I use 2 different cursors that do exactly the same query but against a different table (dba_data_files and dba_temp_files).
CURSOR permanentTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_data_files
WHERE tablespace_name = tablespaceName;
CURSOR temporaryTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_temp_files
WHERE tablespace_name = tablespaceName;
First I'm bothered that I have to use 2 cursors to execute the same query against 2 different tables. Is there no another way around?
Then I fetch the results of this cursors in 2 different loops because I didn't find a way to dynamically call the cursors. I am looking for best practice here, knowing that I will do the same parsing against the results of the 2 cursors.
Thank you,

Hi
Check whether the below query is helpful or not
select      fs.tablespace_name "Tablespace",
     fs.tempspace "Temp MB",
     df.totalspace "Total MB"
     from
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) TotalSpace
     from
     dba_data_files
     group by
     tablespace_name
     ) df,
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) tempSpace
     from
     dba_temp_files
     group by
     tablespace_name
     ) fs
     where
     df.tablespace_name = fs.tablespace_name;
Thanks

Different frame rate encoding on tape (24p & 24pa)

Hi,
I usually record to tape with my dvx100 using 24pa, but sometimes the quick setup dial was switched accidentally resulting in a different frame encoding, like 24p for example.
Everything is recorded in 29.97fps on mini-dv, we all know that, making apparently no difference b/w 24p and 24pa.
But of course, when i'm trying to capture this footage through FCP, i can't always remove the advanced pulldown because there's a few clips that have been recorded with 24p instead of 24pa.
Questions:
- How can you detect the different encoding on tape, whether it's 24p or 24pa?
- Can you get FCP to create a new clip (at least stop) the capture for those sections of the tape where I have something different than 24pa?
- If nothing like that is possible, how do you solve this problem?
Thanks!

the only pulldown pattern that FCP can remove at capture is 24pA (3:2:2:3). Standard 3:2 pulldown can only be reversed using cinema tools. If you open the clip in cinema tools, you'll need to park the playhead on the first frame of the pulldown cadence for it to correctly remove the pulldown. This will create new copies of your clips, which will take up a corresponding amount of space. There is no way for either FCP or CT to reconize the pulldown cadence of standard 3:2 clips, so you'll have to manually find the A frame of the cadence. If you have a huge number of them to do, you may find it quicker to place each clip in a sequence where you can put the A frame of the cadence as the first frame in the sequence. Export these as a batch of reference movies, and you should be able to do a batch inverse telecine on them in Cinema Tools.
These new clips will no longer match the timecode of your tapes, so if you remove the original 29.97 media, you should at least keep the offline 29.97 clips in your project in case you need to recapture.
Hope this helps -
Max Average

Different frame rate in movie mode? iPhone 4

I noticed that my iPhone shoots video clips with different frame rate from time to time. I suppose it slows frame rate on dark shots. For now all of my daylight shots are 30 fps, while night or dark ones are 25 and 24. This makes it hard to edit clips in iMovie for example, because difference in frame rate causes strobe motion effect on output.
!http://pics.livejournal.com/brain_away/pic/000040rc!
!http://pics.livejournal.com/brain_away/pic/00003s3c!
Anybody have the same?
For reliable results I would suggest to shoot two clips: one in sunny daylight conditions, another with ordinary room lightning, maybe a little darker than normal.
Please let me know of the results. Thanks

Doesn't seem to be just a Quicktime bug:
!http://pics.livejournal.com/brain_away/pic/00005gw1!
+Created on: 12.09.2010 22:42:50 Московское летнее время
Report for file: IMG_0206.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................10s 193ms
Total File Size...................................12.9 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................24.697 fps
Total Frames......................................251
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.465
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................10s 163ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................12.8 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 04:13:59
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................10s 193ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................79.4 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 04:13:59+
+Created on: 12.09.2010 22:43:06 Московское летнее время
Report for file: IMG_0194.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................16s 579ms
Total File Size...................................21.0 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................29.970 fps
Total Frames......................................496
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.383
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................16s 550ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................20.9 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 02:45:06
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................16s 579ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................129 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 02:45:06+

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

How can I architect my data layer to yield query result pages to the application as SQL Server prepares them?

I tried to make the question as explicit as possible.
Refer to Sql Server Management Studio's Results view. Depending upon the structure of the execution plan, the Results pane may begin displaying results while the query is still executing. Can someone point me in a direction for architecting a
data layer (I am tech and framework agnostic for this task. Any solution will suffice) that will begin receiving pages of the set before SQL Server has completed the entire query?
The call from the data layer to SQL Server will obviously have to be asynchronous, but is there any additional ceremony that I need to be aware of when issuing OPTION (FAST x) to the query optimizer?

Thanks for the reply. (I actually meant to put this in the SQL Data Access forum, not the T-SQL forum)
"Generally the last step is ORDER BY in a
query, so nothing can start before that executes."
I would imagine you cannot ORDER BY and yield results as they are fetched because of the execution plan that would be generated. For the purposes of this post, please assume that sorting will be done purely client side
"Can you post your query?"
For purposes of discussion, let's assume that the query is
select *
from information_schema.columns
and also assume that you have "lots" of columns to display.
This was an exploratory question to see what would be necessary to replicate the behavior of Management Studio's Query Result view in a custom application.
I would imagine that there's going to be a lot of analysis of the execution plans that get generated in order for the OPTION (FAST x) optimizer hint to do any good, but apart from general tuning concerns that would allow SQL SERVER to yield a page of data
"fast", I was wondering if there was anything else required of the calling client to force it to yield return its first page.
After thinking about this (and phrasing it the way I did in the last sentence) perhaps this is the incorrect forum for this question. I imagine that my concerns are better addressed in forums dedicated to the technology of the calling client (which
would be a .NET assembly)
Be that as it may, if there is any ceremony that SQL Server imposes on clients in order to yield return, I would expect that my question would be in the scope of SQL Server discussions (even though I intended this to be in a different SQL Server forum)

Stepping through a query result set, replacing one string with another.

I want to write a function that replaces the occurance of a string with another different string. I need it to be a CF fuction that is callable from another CF function. I want to "hand" this function an SQL statement (a string) like this:   (Please note, don't bother commenting that "there are eaiser ways to write this SQL..., I've made this simple example to get to the point where I need help. I have to use a "sub_optimal" SQL syntax just to demonstrate the situation)
Here is the string I want to pass to the function:
SELECT
[VERYLONGTABLENAME].FIRST_NAME,
[VERYLONGTABLENAME].LAST_NAME,
[VERYLONGTABLENAME].ADDRESSS
FROM
LONGTABLENAME [VERYLONGTABLENAME]
Here is the contents of the ABRV table:
TBL_NM, ABRV    
VERYLONGTABLENAME, VLTN
SOMEWHATLONGTALBENAME, SLTN
MYTABLENAME, MTN
ATABLENAME, ATN
The function will return the original string, but with the abreviations in place of the long table names, example:
SELECT
VLTN.FIRST_NAME,
VLTN.LAST_NAME,
VLTN.ADDRESSS
FROM
LONGTABLENAME VLTN
Notice that only the table names surrounded by brackets and that match a value in the ABRV table have been replaced. The LONGTABLENAME immediately following the FROM is left as is.
Now, here is my dum amatuer attempt at writing said function: Please look at the comment lines for where I need help.
      <cffunction name="AbrvTblNms" output="false" access="remote" returntype="string" >
        <cfargument name="txt" type="string" required="true" />
        <cfset var qAbrvs=""> 
        <cfset var output_str="#txt#"> 
        <cfquery name="qAbrvs" datasource="cfBAA_odbc" result="rsltAbrvs">
            SELECT TBL_NM, ABRV FROM BAA_TBL_ABRV ORDER BY 1
        </cfquery>
     
    <cfloop index="idx_str" list="#qAbrvs#">      
    <cfset output_str = Replace(output_str, "#idx_str#", ) 
    </cfloop>               
        
    <cfreturn output_txt>
    </cffunction>
I'm mainly struggling with syntax here. I know what I want to happen, I know how to make it happen in another programming language, just not CF9. Thanks for any help you can provide.

RedOctober57 wrote:...
Thanks for any help you can provide.
One:
<cfset var output_str="#txt#"> 
No you do not need to create a local variable that is a copy of the arguments variable as the arguments scope is already local to the function, but you do not properly reference the arguments scope, so you leave yourself open to using a 'txt' variable in another scope. Thus the better practice would be to reference "arguments.txt" where you need to.
Two:
I know what I want to happen, I know how to make it happen in another programming language, just not CF9.
Then a better start would be to descirbe what you want to happen and give a simple example in the other programming language. Most of us are muti-lingual and can parse out clear and clean code in just about any syntax.
Three:
<cfloop index="idx_str" list="#qAbrvs#">      
I think you want to be looping over your "qAbrvs" record set returned by your earlier query, maybe.
<cfloop query="qAbrvs">
Four:
<cfset output_str = Replace(output_str, "#idx_str#", ) 
Continuing on that assumption I would guess you want to replace each instance of the long string with the short string form that record set.
<cfset output_str = Replace(output_str,qAbrs.TBLNM,qAbrs.ABRV,"ALL")>
Five:
</cfloop>               
If this is true, then you are looping over the record set of tablenames and abreviations that you want to replace in the string.

2.1EA2: Pinning Query Results and changing Connections [fixed in 2.1.0]

I am on 2.1EA2 (JDK 1.6.0_16) and been playing with the new SQL Worksheet pin query results functionality. I have found that it is possible to run a query against one connection, pin the results and then change connection and run the same (or a different) query against another connection. I really like this, but found a few problems:
#1 There doesn't seem to be any way to tell which connection a query result tab was actually run against
#2 Even if all rows are fetched, if I then disconnect from the first connection it can get quite messy. Sometimes I get an empty connection dialog (I can't remember the exact title and it doesn't reproduce consistently) with only the close window X in the corner. Some times I get prompted to log in with a connection information dialog with no reference to the connection it is connecting to - cancelling only brings up the same dialog again until I successfully connect. Some times I get prompted to log in and while that is still on the screen, SQL Developer logs me back in to the connection (even though I don't save passwords) - I even get a new worksheet for the reconnected connection.
theFurryOne

Raghu,
I am happy with both.
#1 - I would be happy if the connection name was at the start of the tool-tip style pop-up when hovering over Query Results tab and the Query Result SQL dialog that opens on the SQL button. -K-'s suggestion makes it immediately obvious for the currently selected Query Results tab, without having to move the mouse or click on something.
Ideally, I would like something similar for the other output tabs (ie Script Output), but they seem to show results for all connections that the worksheet has used, so the same concept may not work.
#2 - I am used to the grid being cleared when disconnecting from earlier versions - I assumed that this was a bug where SQLD was not checking the connection of the results, just the current connection of the worksheet.
theFurryOne

Export query results to flat file with dynamic filename

Hi
Can anybody can point me how to dynamic export query serults set to for example txt file using process flows in OWB.
Let say I have simple select query
select * from table1 where daterange >= sysdate -1 and daterange < sysdate
so query results will be different every day because daterange will be different. Also I would like to name txt file dynamicly as well
eg. results_20090601.txt, results_20090602.txt, results_20090603.txt
I cant see any activity in process editor to enter custom sql statment, like it is in MSSQL 2000 or 2005
thanks in advance

You can call existing procedures from a process flow the procedure can create the filename with whatever name you desire. OWB maps with file as target can also create a file with a dynamic name defined by an expression (see here ).
Cheers
David

Query results in different frame.

Similar Messages

Maybe you are looking for