Different frame rate encoding on tape (24p & 24pa)

Hi,
I usually record to tape with my dvx100 using 24pa, but sometimes the quick setup dial was switched accidentally resulting in a different frame encoding, like 24p for example.
Everything is recorded in 29.97fps on mini-dv, we all know that, making apparently no difference b/w 24p and 24pa.
But of course, when i'm trying to capture this footage through FCP, i can't always remove the advanced pulldown because there's a few clips that have been recorded with 24p instead of 24pa.
Questions:
- How can you detect the different encoding on tape, whether it's 24p or 24pa?
- Can you get FCP to create a new clip (at least stop) the capture for those sections of the tape where I have something different than 24pa?
- If nothing like that is possible, how do you solve this problem?
Thanks!

the only pulldown pattern that FCP can remove at capture is 24pA (3:2:2:3). Standard 3:2 pulldown can only be reversed using cinema tools. If you open the clip in cinema tools, you'll need to park the playhead on the first frame of the pulldown cadence for it to correctly remove the pulldown. This will create new copies of your clips, which will take up a corresponding amount of space. There is no way for either FCP or CT to reconize the pulldown cadence of standard 3:2 clips, so you'll have to manually find the A frame of the cadence. If you have a huge number of them to do, you may find it quicker to place each clip in a sequence where you can put the A frame of the cadence as the first frame in the sequence. Export these as a batch of reference movies, and you should be able to do a batch inverse telecine on them in Cinema Tools.
These new clips will no longer match the timecode of your tapes, so if you remove the original 29.97 media, you should at least keep the offline 29.97 clips in your project in case you need to recapture.
Hope this helps -
Max Average

Similar Messages

  • Different frame rate in movie mode? iPhone 4

    I noticed that my iPhone shoots video clips with different frame rate from time to time. I suppose it slows frame rate on dark shots. For now all of my daylight shots are 30 fps, while night or dark ones are 25 and 24. This makes it hard to edit clips in iMovie for example, because difference in frame rate causes strobe motion effect on output.
    !http://pics.livejournal.com/brain_away/pic/000040rc!
    !http://pics.livejournal.com/brain_away/pic/00003s3c!
    Anybody have the same?
    For reliable results I would suggest to shoot two clips: one in sunny daylight conditions, another with ordinary room lightning, maybe a little darker than normal.
    Please let me know of the results. Thanks

    Doesn't seem to be just a Quicktime bug:
    !http://pics.livejournal.com/brain_away/pic/00005gw1!
    +Created on: 12.09.2010 22:42:50 Московское летнее время
    Report for file: IMG_0206.MOV
    General / Container Stream #1
    Total Video Streams for this File.................1
    Total Audio Streams for this File.................1
    Video Codecs Used.................................AVC
    Audio Codecs Used.................................AAC LC-PS
    File Format.......................................MPEG-4
    Play Time.........................................10s 193ms
    Total File Size...................................12.9 MiB
    Total Stream BitRate..............................10.6 Mbps
    Encoded with......................................4.1
    Encoding Library..................................Apple QuickTime
    Video Stream #1
    Codec (Human Name)................................AVC
    Codec (FourCC)....................................avc1
    Codec [email protected]
    Frame Width.......................................1 280 pixels
    Frame Height......................................720 pixels
    Frame Rate........................................24.697 fps
    Total Frames......................................251
    Display Aspect Ratio..............................16:9
    Scan Type.........................................Progressive
    Color Space.......................................YUV
    Codec Settings (Summary)..........................1 Ref Frames
    QF (like Gordian Knot)............................0.465
    Codec Settings (CABAC)............................No
    Codec Settings (Reference Frames).................1
    Video Stream Length...............................10s 163ms
    Video Stream BitRate..............................10.6 Mbps
    Video Stream BitRate Mode.........................VBR
    Bit Depth.........................................8 bits
    Video Stream Size.................................12.8 MiB (99%)
    Video Stream Title................................Core Media Video
    Date of Original Encoding.........................UTC 2010-09-12 04:13:59
    Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
    Transfer Characteristics..........................BT.709-5, BT.1361
    Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
    Audio Stream #1
    Codec.............................................AAC
    Codec (FourCC)....................................40
    Audio Stream Length...............................10s 193ms
    Audio Stream BitRate..............................64.0 Kbps
    Audio Stream BitRate Mode.........................CBR
    Number of Audio Channels..........................2
    Audio Channel's Positions.........................Front: L R
    Sampling Rate.....................................44.1 KHz
    Audio Stream Size.................................79.4 KiB (1%)
    Audio Stream Title................................Core Media Audio
    Date of Original Encoding.........................UTC 2010-09-12 04:13:59+
    +Created on: 12.09.2010 22:43:06 Московское летнее время
    Report for file: IMG_0194.MOV
    General / Container Stream #1
    Total Video Streams for this File.................1
    Total Audio Streams for this File.................1
    Video Codecs Used.................................AVC
    Audio Codecs Used.................................AAC LC-PS
    File Format.......................................MPEG-4
    Play Time.........................................16s 579ms
    Total File Size...................................21.0 MiB
    Total Stream BitRate..............................10.6 Mbps
    Encoded with......................................4.1
    Encoding Library..................................Apple QuickTime
    Video Stream #1
    Codec (Human Name)................................AVC
    Codec (FourCC)....................................avc1
    Codec [email protected]
    Frame Width.......................................1 280 pixels
    Frame Height......................................720 pixels
    Frame Rate........................................29.970 fps
    Total Frames......................................496
    Display Aspect Ratio..............................16:9
    Scan Type.........................................Progressive
    Color Space.......................................YUV
    Codec Settings (Summary)..........................1 Ref Frames
    QF (like Gordian Knot)............................0.383
    Codec Settings (CABAC)............................No
    Codec Settings (Reference Frames).................1
    Video Stream Length...............................16s 550ms
    Video Stream BitRate..............................10.6 Mbps
    Video Stream BitRate Mode.........................VBR
    Bit Depth.........................................8 bits
    Video Stream Size.................................20.9 MiB (99%)
    Video Stream Title................................Core Media Video
    Date of Original Encoding.........................UTC 2010-09-12 02:45:06
    Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
    Transfer Characteristics..........................BT.709-5, BT.1361
    Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
    Audio Stream #1
    Codec.............................................AAC
    Codec (FourCC)....................................40
    Audio Stream Length...............................16s 579ms
    Audio Stream BitRate..............................64.0 Kbps
    Audio Stream BitRate Mode.........................CBR
    Number of Audio Channels..........................2
    Audio Channel's Positions.........................Front: L R
    Sampling Rate.....................................44.1 KHz
    Audio Stream Size.................................129 KiB (1%)
    Audio Stream Title................................Core Media Audio
    Date of Original Encoding.........................UTC 2010-09-12 02:45:06+

  • How do I convert frame rate from 30p to 24p????

    I am about to start post on a short film shot on the mark II. I am going to convert the footage to ProRes. The director wants the "film" look. Can I change the frame rate from 30p to 24p in compressor? Are there any key settings I should know about?

    There are lot of different ways to go about it, all have mixed results, and there is no way you'll get flawless results. However, here's a few ways to try:
    A) Conform to 23.98, using Cinema Tools - You'll be slowing down the footage, so this is no good if you have on-set dialogue recording you're going to keep and need lip sync. If you weren't going to use any on-set audio and doing all dialogue and FX replacement, it wouldn't matter. This is also effective for music videos - just speed up the audio playback while shooting, and when you slow the video down in post, it'll match.
    B) Use retiming in Compressor - I believe this uses some advanced frame blending and optical flow - I've had decent results with this method, but you can end up with some artifacts on high motion material.
    C) Use Twixtor within FCP or Adobe After Effects. This has been my preferred method for surgical speed manipulation. It's time consuming and just like method B, you'll get artifacts on high motion material.
    What you definitely do NOT want to do is drop your 30p footage into a 24p timeline. The motion will be horribly stuttery. Similarly, don't try to just use frame blending to achieve the frame rate conversion - it's not very impressive to see frame blending all over everything.
    You're best results will come from having low motion footage. Interviews, head shots, etc. work great. If you're doing a lot of action, I'd advise against trying to convert using anything but method A. If you can get your hands on the 7D, you can shoot 24p natively.

  • Two timecode stripes at different frame rates?  (and other BITC stuff)

    I'm not an FCP user, but I'm working with an editor who's not that up on the finer points of FCP operation. Would like to know if certain things are possible...
    1a. Is it possible for FCP to simultaneously output a QT file with two different BITC stripes running at different frame rates (say, 29.97 fps and 23.976fps)? Or...
    1b. For an already BITC'd work print (striped with 23.976 timecode) is it possible to add a second stripe at 29.97 fps, synchronized from the 1-hour mark (first frame of picture)?
    2. Are there any parameters available in FCP to adjust the size of the numbers and the position of a timecode stripe?
    3. BONUS QUESTION: what does the "R" in "TCR" mean? (just curious -- I've seen this for years but never knew what the "R" stood for).
    Message was edited by: iSchwartz

    iSchwarz!
    Welcome to the visual side of things. Never thought I'd see you venture out of Soundtrack Pro and Logic land, glad to see you here.
    3. R stand for Reader. TimeCodeReader. G will stand for Generator. TimeCodeGenerator
    2. You mean adjust the TCR window? If you drop the filter on a clip, load that clip into the viewer, you can adjust the filter parameters there.
    1b. BITC? There are 2 type of timecode that I'm aware of: VTC (or ViTC)(Vertical Interval Timecode) and LTC (Longitudinal Timecode). I seriously doubt this as then FCP would have to use to different timebases within the same sequence.
    1a. Again, I seriously doubt this do to the different timebases.
    You could print to tape this 23.976 fps sequence which FCP would add the pulldown resulting in 29.97 fps timecode and then import that. Or, maybe Compressor can add the pulldown and export a file wtih 29.97 fps timecode. Don't know, never needed to try that.
    Good luck, report back with your findings.
    Zeb

  • Help with sequence settings in final cut for project with 2 different frame rates.

    I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

    Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
    I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

  • Re-connecting media to different frame rate clip

    Hi guys,
    Wondering whether anyone can help me out to solve an error I've made...
    So, I've basically completed an edit (some episodes on Final Cut Pro X, some on Final Cut 7) only to find out that I'd transcoded the media at the incorrect frame rate, 23.98 instead of 25fps. Yup, pretty big error. And now I need to redeliver the projects in the 25fps format.
    I've transcoded a clip to the correct 25fps rate and tried to reconnect that clip to the 23.98fps one in the timeline, but I'm unable to reconnect as the clips are of differing frame rates.
    Has anyone got any ideas how I can reconnect the clips or any suggestions that will make this situation easier to rectify rather than copying out the entire edit which will cause me to spend a week crying into my keyboard.
    Thanks in advance for any suggestions.
    Olly

    Hmmm...
    Tried this but it brings in the media that is 23.98 and there's no way I can tell to link to the new 25fps clips. Unless there's anything else I can do? Any other way to match the clips? (the 25fps clips are that little bit longer in duration) I also have some edits in fcp7. By using cinema tools in that would I be able to change the frame rates and link up to the new 25fps?
    Cheers for the advice though Russ, this way does give me the template of the 23.98 edit so that I can match the new 25fps shots to, but it's gonna be a long process.

  • Relink project clips with different frame rate

    Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie.  When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate.  I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains. 
    How can I change the clip properties to frame rate 23.95 so I can link to the original media?
    Thanks.

    The media got unlinked importing the project and events from iMovie to Final Cut.
    I've attached screen shots with all the specs.

  • How can I edit multiple clips with different frame rates on the same timeline

    how can I edit multiple clips with different frame rates on the same timeline

    You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
    Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
    You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
    The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
    Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
    Have fun.
    x

  • Frames rates encode to audio files

    Hello,
    I am not a Soundtrack pro user nor a Final cut pro user, (I use REAPER, and other audio programs); however, I got two people who called me asking (because I am apparently there only audio person they know) "how to change the frame rate on audio already recorded?" One person used the zoom H4N, and the other used a MAudio (?) recorder.. I looked them up and there is no encode to match the frame rate of the film to the sound. It seems that both recorders have no function to do frame rate encoding. (film speed was 24 frames not 30 frames.)
    Is there a function to change the audio encode to match the frame rate of the film with in these programs?
    What I know is sound is sound; 10 min of footage equals 10 min of audio. It is the encode that tells the film edit tool this is to match 24 frame or 30 frame.
    I have looked into the manuals (table of contents) of Final cut pro and Soundtrack pro and not found the key words "Frame rate change to audio files" or "encode to audio files for frame rate"... I also looked online with the words "Frame rate change for Audio files" and "Audio encode frame rate change."
    Can anyone help me to pass this information back to these people?
    Thank you!

    Tell them to change the sample rate to 48khz/16bit. Straight audio does not have a frame rate.
    x

  • How can I use two sequences w/ different frame rates

    I shot wedding (on Sony Z5) initially (1st tape) in DV widescreen (29.97/ 30 fps) but tapes 2, 3 & 4 were shot 1080p24 fps  Big mistake; now obvious.
    Edited all in FCP 6. On trying to cut & paste sequences together I get " cannot nest sequences with different editing timebases".
    I have 23 min.intro/ ceremony sequence as stand alone QT mov now. How can I best convert that and/or merge it w/ the rest ( 62 min. 24 fps  sequences), or perform other action to unite the diff  frame rates into one, w/ best looking quality for the DVD/ bride & groom? Trying to beat Xmas deadline...
    Thanks in advance! Happy Holidays to all.
    3 Ghz Intel Core 2 Duo / 8 GB / OS 10.6.8  FCP 6.0.6

    I went back and forth on this.
    Ordinarily, I'd conform to the format that the majority of the footage was shot in. But if you're going to DVD, and it's going to be compressed to 480 anyway, then why not down convert the 1080 footage to 480?.  At the same time, I would imagine re-timing the 24 (23.98?) to 29.97 would look reasonably consistent with the 29.97 SD.
    This could be done in FCP, but I think Compressor will produce a better result. The adjustments you need are in the Settings menu in the Encoder (with Audio set to pass through), Geometry (720x480 16:9 Anamorphic), and Frame Controls (Resize Filter set to Best).
    This will not be a short encode, so I would first test a short section to double check your settings and sound sync are right, and to compare against the quality of tape 1.
    Good luck.
    Russ

  • Creating a Gif is different frame rate

    If I have an uncompressed .AVI file that I created in After Effects CS5.5 which is 23.976 fps, and load it in Adobe Media Encoder CS5.5, and tell it to create a .GIF of it, at an output fps of 23.976, when I load the created .GIF into Adobe After Effects it tells me the frame rate is 25 fps and there is a black frame padded on the end.  I want the frame rate of the GIF to be what I ask it to be, ie. 23.976, with no additional black frames.
    Here's what happened with screenshots:
    1. I load the uncompressed AVI file that was created in Adobe After Effects CS5.5 into Adobe Media Encoder CS5.5.  Note below that Adobe Media Encoder is saying that the source clip is 23.976 fps, and that the export settings are to create an animated GIF at 23.976 fps.
    2. After Adobe Media Encoder CS5.5 has said "done" (Encoding Completed Succesfully) for this export to a .GIF, if I take that .GIF file that Adobe Media Encoder has just created into Adobe After Effects CS5.5, this is what it says:
    As can be seen above, Adobe After Effects CS5.5 is saying the GIF file that Adobe Media Encoder CS5.5 has just encoded is actually 25 fps, not 23.976 fps like I told it to be exported as.  Also, the GIF Adobe Media Encoder has created is 10 frames long, whereas my original uncompressed AVI is 9 frames long.
    Edit: I've just been reading up on the GIF format and it seems it doesn't store a frame rate but instead stores a frame delay, which is in hundredths of a second.  If this is just an integer, is this the reason for the displayed frame rate discrepancy, ie. 1 frame at 23.976 fps  would be 4.1708 hundredths of a second I think, and 1 frame at 25 fps would be 4 hundredths of a second I think - both rounded to the nearest integer would be 4 hundredths of a second so would the frame delay be set to "4" for both 23.976 fps and 25 fps? (there is also the fact that some short time will be taken for the drawing of the frame)
    Though even with the above, it shouldn't be increasing the amount of output frames.  It converts it correctly (no additional frames) if I use VirtualDub to convert the AVI to GIF instead of Adobe Media Encoder CS5.5.

    Thanks.  Could you get them to also check other parts of the code too.  eg. when I had a work area set in Adobe After Effects CS5.5 and then loaded that project into Adobe Media Encoder (dynamic link etc.) and rendered just the work area I think it was about a frame out then too - I don't think it was a GIF in that case but another type (maybe AVI/H264).

  • FCP XML to Premiere Different Frame Rate

    Hello,
    I have imported an FCP 7 XML into Premiere 5.04. When my sequence was in FCP it was at a frame rate of 23.976 at 720P. When it came into Premiere, though, it had changed to 59.94 fps at 720P.
    I wonder how this has happened and if there is any way to change it back to 23.976 fps? Or should I just leave it as is?
    I tried copying all of the clips within the 59.94 fps sequence into a new sequence that was 23.976, but this resulted in partial frame gaps (like a quarter of a frame missing). Sometimes you wouldn't even notice this during playback, but other times you do. So I assume this is not the best way to change it back to 23.976.
    Thank you.

    Hi Colin,
    Here is the info:
    General
    Complete name                    : /Volumes/David Whillans 500GB/Ghana Documentary FCP/Final Cut Pro Documents/Capture Scratch/Day 2/A01_BusMirror_01.mov
    Format                           : MPEG-4
    Format_Commercial_IfAny          : DVCPRO HD
    Format profile                   : QuickTime
    Codec ID                         : qt 
    File size                        : 124 MiB
    Duration                         : 21s 188ms
    Overall bit rate                 : 49.2 Mbps
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Writing library                  : Apple QuickTime
    Original source medium           : Card A
    com.panasonic.professionalplugin : 2009-05-05 07:17:50 -0400
    org.smpte.mxf.identification.fil : 2009-05-05 11:17:50 +0000
    com.panasonic.professionalplugin : 2009-05-05 07:18:11 -0400
    com.panasonic.professionalplugin : Panasonic
    org.smpte.mxf.package.material.p : 2009-05-05 11:17:50 +0000
    com.panasonic.professionalplugin : B8TCA0255
    org.smpte.mxf.identification.app : P2
    com.panasonic.professionalplugin : AG-HVX200P
    org.smpte.mxf.identification.app : Panasonic
    org.smpte.mxf.package.material.c : 2009-05-05 11:17:50 +0000
    org.smpte.mxf.identification.app : 0x060E2B34040101090E0E010101000001
    com.panasonic.professionalplugin : 060A2B340101010501010D4313000000ECEA5B74564905F70080458228D2D24D
    org.smpte.mxf.package.material.p : 0x060A2B340101010501010D4313000000ECEA5B74564905F70080458228D2D24D
    org.smpte.mxf.package.material.p : 0021JO
    com.apple.proapps.reel           : Card A
    com.panasonic.professionalplugin : 2009-05-05 07:18:11 -0400
    com.panasonic.professionalplugin : 2009-05-05 07:17:50 -0400
    org.smpte.mxf.identification.app : 2.0
    com.apple.proapps.originalFormat : DVCPRO HD 720p60
    org.smpte.mxf.identification.gen : 0x9007CAD96EFF4741A0AF8763540BD0E6
    com.apple.proapps.clipID         : 060A2B340101010501010D4313000000ECEA5B74564905F70080458228D2D24D
    com.panasonic.professionalplugin : SHOOTING
    Media/UUID                       : 75369709-6DCB-4DC0-A504-1B84D8A45AC8
    Video
    ID                               : 1
    Format                           : DV
    Format_Commercial_IfAny          : DVCPRO HD
    Codec ID                         : dvhp
    Duration                         : 21s 188ms
    Bit rate mode                    : Variable
    Bit rate                         : 46.0 Mbps
    Maximum bit rate                 : 97.7 Mbps
    Width                            : 936 pixels
    Original width                   : 960 pixels
    Height                           : 702 pixels
    Original height                  : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate mode                  : Constant
    Frame rate                       : 23.976 fps
    Original frame rate              : 29.970 fps
    Standard                         : NTSC
    Color space                      : YUV
    Chroma subsampling               : 4:2:2
    Bit depth                        : 10 bits
    Scan type                        : Progressive
    Compression mode                 : Lossy
    Bits/(Pixel*Frame)               : 2.922
    Stream size                      : 116 MiB (94%)
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Audio #1
    ID                               : 2
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: C
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 1.94 MiB (2%)
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Audio #2
    ID                               : 3
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: C
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 1.94 MiB (2%)
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Audio #3
    ID                               : 4
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: C
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 1.94 MiB (2%)
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Audio #4
    ID                               : 5
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: C
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 1.94 MiB (2%)
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49
    Audio #5
    ID                               : 1-0
    Format                           : PCM
    Muxing mode                      : DV
    Muxing mode, more info           : Muxed in Video #1
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 0.00 Byte (0%)
    Audio #6
    ID                               : 1-1
    Format                           : PCM
    Muxing mode                      : DV
    Muxing mode, more info           : Muxed in Video #1
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 0.00 Byte (0%)
    Audio #7
    ID                               : 1-2
    Format                           : PCM
    Muxing mode                      : DV
    Muxing mode, more info           : Muxed in Video #1
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 0.00 Byte (0%)
    Audio #8
    ID                               : 1-3
    Format                           : PCM
    Muxing mode                      : DV
    Muxing mode, more info           : Muxed in Video #1
    Duration                         : 21s 188ms
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 0.00 Byte (0%)
    Menu
    ID                               : 6
    Language                         : English
    Encoded date                     : UTC 2009-06-26 15:49:49
    Tagged date                      : UTC 2009-06-26 15:49:49

  • Footage of different formats on one timeline; also different frame rates

    I need to edit footage of different formats on one timeline. The end product will be compressed for the web so I do not need to be working in HD.
    I have been using the timeline settings for DVCAM (720 x 480) Anamorphic.
    I have broll footage shot and captured at 960 x 720 59.95 FPS DVCPRO HD 720p60
    And Interview footage shoot in DV Cam -- 720 x 480 29.79 Dv/DVCPRO – NSTC
    When I put the HD footage on the timeline and render it, it appears to be in fast-forward – as if I adjusted the speed of the clip. I am wondering if it is caused by the difference in frame rates and also what I can do about it.
    Thanks!

    The main bulk of your footage is DV and DVCAM, with some B-roll at DVCPRO HD, and you need to deliver HDCAM? Then you either need to have a dub facility use a Terranex to upconvert all the DV to DVCPRO HD, or you need to invest in a Kona 3 and use that to upconvert your footage to DVCPRO HD...and also use that to output to HDCAM.
    Shane

  • Video doesn't slow when added to timeline of different frame rate

    I'm having trouble understanding what's going on here.  I have a video shot at 59.94 fps, and I add it to a sequence that is set at 29.97 fps.  It plays back normally which makes sense if premiere is dropping frames by 1/2, but the drop frame indicator says that it isn't dropping frames.  The clip also runs the same length.  The interpret frame rate for the clip in the project window says 59.94 fps, so if it's added to a sequence that is set at 29.97 fps and it's NOT dropping frames, shouldn't it be slowed down?

    OK cool thank you very much.  So I've been doing some research to figure out the best way to edit this project.  The problem is that I have some GoPro videos shot at 1080X1920 and 59.94 fps and some at 480X840 and 240 fps.  But the catch is I want to make the final product work well for Youtube.  This is how I feel I should go about getting the best quality for my final video.
    1.  Set the sequence settings to 720X1280 (which is what I will export as so that the 480X840 doesn't loose as much quality compared to having to resize up to 1080X1920 to match the other clips).  I don't think there's much quality loss in down-scaling the 1080X1920 to 720X1280 (if any, or is there?), so it's kind of a happy medium for both frame sizes that I have and it's still good for Youtube.
    2.  Apparently Youtube really works well with 29.97 fps, so this is what I will set the sequence frame rate at.
           **Another side question I have is what if my sequence frame rate is set at 29.97fps and I interpret the frame rate of a 59.94fps clip as 29.97fps and add it to the sequence.  Now if I use the rate stretch tool to speed up the now slowed down clip to 200% so that it plays at normal speed.  Will Premiere remove frames to speed up the clip or does it really increase the rate of the frames so that I don't loose any frames?**  My guess is if I export at 29.97fps it will remove half of the frames.
    Is it not possible to have an exported movie clip that contains multiple frame rates?

  • Inserting old swf into new fla with different frame rate

    Hi, I'm trying to insert an old banner ad into a new Flash site.  The problem is, the banner I made at 20 frames per second, and the Flash site is set to 41, so it literally plays the banner twice as fast.  Any ideas as to what I can do about this?  Thank you.

    A few of them I may have the original source files on disk.  Do you know what's the easiest way to transpose them to the higher frame rate?
    For the ones I don't have, I should open the swf file in the new site and add a frame between each already existing frame?
    Yes I imported the swf, I'm kind of just finding my way around Flash and I don't know how to load them dynamically.  If I did load them dynamically, would they play at their original frame rate?

Maybe you are looking for