Query syntax highlighting lost when using national characters.

Theres a minor bug with syntax highlighting. If I have a query in sqldeveloper like -
select * from table
where name = N'fred'
and ... ... ...
All the coloured syntax highlighting is lost from the N' onwards.
Edited by: [email protected] on 24-Feb-2009 03:18

Hi jonathanthomas,
Since this issue is related to the web development,
you could ask this question in the ASP.NET forum:
http://forums.asp.net. If then, you could get
an answer more quickly and professional. Thanks for your cooperation.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Using national characters in Reports Parameter Form

Hi,
I have Reports Server 11gR1. When I specify paramform=yes when running report, I get Parameters Form. If I specifiy any national character in parameter form field, it is not send to Reports Server. Instead of my character, question mark (?) is send to reports server and that lead to wrong result.
Is there any way I can use national characters in Parameter Form in Reports Server?
Regards,
Lovro

wildcard in crystal syntax is *
field like ["*oil*","*filter*"] // will return values containing oil or filter
field like "filter*" // with return values starting with filter
field like ["*oil","filter*"]
// will return values ending with oil or starting with filter

Network is lost when using GPS on 3GS

Network is lost when using GPS on 3GS.
ver. 5.1.1 (9В206)
model MC637RR
SN 86223J1DEDG
05.16.05.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Derby db named query causes parse error when using derby db MONTH function

Hi all!
I'm trying to create an application using the persistance api and beans binding. I have created my database and entity classes.
My problem is creating a named query that uses some of the functionality from the derby database (which is embedded in the application).
I have a named query:
@NamedQuery(name = "Vehicles.findbymotmonth", query = "SELECT v FROM Vehicles v WHERE MONTH(v.lastmotdate) = :monthnumber") The actual query works fine when I send it directly to the db (with the parameter filled in) but causes an exception when used as a named query:
Local Exception Stack:
Exception [TOPLINK-8025] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.EJBQLException
Exception Description: Syntax error parsing the query [Vehicles.findbymotmonth: SELECT v FROM Vehicles v WHERE MONTH(v.lastmotdate) = :monthnumber], line 1, column 32: unexpected token [MONTH].
Internal Exception: line 1:32: unexpected token: MONTH
at oracle.toplink.essentials.exceptions.EJBQLException.unexpectedToken(EJBQLException.java:389)
... I've tried looking for solutions online but it seems evryone just writes up the original java db application example provided by sun and no one has tried doing more than "select c from customers c".
I'm using the netbeans ide (6.5).
Please tell me there is a simple solution to this and the persistance API can handle complex queries!
Thanks in advance.

one solution: assume the toplink library to be so full of bugs as to be unusable and switch to the hibernate persistance manager where it works fine.
Edited by: pointer2null on Feb 17, 2009 11:02 AM

Orcl:query-database gives error when using to_char function in select stmt

hi
Use Case : We get a csv file ("bank_import_<MMDDYYYYY>.csv") from the bank containing the transactions occured for the month. The date in the filename is retrieved into string and i need to convert this string to the format "MON-DD-YYYY". This is the required format for an header table which takes this string as primary key.
Code:
statement_name = '11302206'.........
<copy>
<from expression="concat("'select to_char(to_date('",bpws:getVariableData('statement_name') ,"','MMDDYYYY'),'MON-DD-YYYY') from dual'")"/>
<to variable="xpath"/>
</copy>
<copy>
<from expression="orcl:query-database(bpws:getVariableData('xpath'),false(),false(),'jdbc:oracle:thin:apps/apps@croaker:1529:RSICMI')"/>
<to variable="statement_name"/>
</copy>
Error:
[2006/12/06 19:13:04] Updated variable "xpath" less
<xpath>'select to_char(to_date('10302006','MMDDYYYY'),'MON-DD-YYYY') from dual'</xpath>
[2006/12/06 19:13:04] "XPathException" has been thrown. less
XPath expression failed to execute.
Error while processing xpath expression, the expression is "orcl:query-database(bpws:getVariableData("xpath"), false(), false(), "jdbc:oracle:thin:apps/apps@croaker:1529:RSICMI")", the reason is .
Please verify the xpath query.
Log Message:
<2006-12-06 19:13:04,595> <DEBUG> <UAT.collaxa.cube.xml> <XPathUtil::evaluate> XPathQuery[concat("'select to_char(to_date('", bpws:getVariableData("statement_name"), "','MMDDYYYY'),'MON-DD-YYYY') from dual'")], XPath Result: class=java.lang.String value='select to_char(to_date('10302006','MMDDYYYY'),'MON-DD-YYYY') from dual'
<2006-12-06 19:13:04,595> <DEBUG> <UAT.collaxa.cube.xml> <XPathUtil::initXPath> namespaceMapping is: rootMap: {bpws=http://schemas.xmlsoap.org/ws/2003/03/business-process/, xp20=http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20, ns4=http://xmlns.oracle.com/pcbpel/adapter/db/top/BAIBankUpload, ldap=http://schemas.oracle.com/xpath/extension/ldap, xsd=http://www.w3.org/2001/XMLSchema, ns5=http://xmlns.oracle.com/pcbpel/adapter/file/, client=http://xmlns.oracle.com/BAI_BankUpload, ora=http://schemas.oracle.com/xpath/extension, ns1=http://xmlns.oracle.com/pcbpel/adapter/file/readBAIBankImportCSV/, ns3=http://TargetNamespace.com/readBAIBankImportCSV, ns2=http://xmlns.oracle.com/pcbpel/adapter/db/Insert_SI_CE_STATEMENT_LINES_INT/, bpelx=http://schemas.oracle.com/bpel/extension, orcl=http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc, =http://schemas.xmlsoap.org/ws/2003/03/business-process/}
scopedMap: {}
<2006-12-06 19:13:04,751> <DEBUG> <UAT.collaxa.cube.xml> <XPathUtil::evaluate> XPathQuery :orcl:query-database(bpws:getVariableData("xpath"), false(), false(), "jdbc:oracle:thin:apps/apps@croakercom:1529:RSICMI")
org.collaxa.thirdparty.jaxen.FunctionCallException
     at org.collaxa.thirdparty.jaxen.FunctionCallException.fillInStackTrace(FunctionCallException.java:124)
     at java.lang.Throwable.<init>(Throwable.java:195)
     at java.lang.Exception.<init>(Exception.java:41)
     at org.collaxa.thirdparty.jaxen.saxpath.SAXPathException.<init>(SAXPathException.java:83)
     at org.collaxa.thirdparty.jaxen.JaxenException.<init>(JaxenException.java:82)
     at org.collaxa.thirdparty.jaxen.FunctionCallException.<init>(FunctionCallException.java:86)
     at oracle.tip.pc.services.functions.ExtFuncFunction$QueryDatabaseFunction.call(ExtFuncFunction.java:190)
     at org.collaxa.thirdparty.jaxen.expr.DefaultFunctionCallExpr.evaluate(DefaultFunctionCallExpr.java:184)
     at org.collaxa.thirdparty.jaxen.expr.DefaultXPathExpr.asList(DefaultXPathExpr.java:107)
     at org.collaxa.thirdparty.jaxen.BaseXPath.selectNodesForContext(BaseXPath.java:724)
     at org.collaxa.thirdparty.jaxen.BaseXPath.selectNodes(BaseXPath.java:253)
     at org.collaxa.thirdparty.jaxen.BaseXPath.evaluate(BaseXPath.java:210)
     at com.collaxa.cube.xml.xpath.XPathUtil.evaluate(XPathUtil.java:93)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:501)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:122)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:188)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3408)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1836)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:166)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:252)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5438)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1217)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:511)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
     at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Root cause:
java.lang.ClassCastException
     at oracle.tip.pc.services.functions.ExtFuncFunction$QueryDatabaseFunction.call(ExtFuncFunction.java:158)
     at org.collaxa.thirdparty.jaxen.expr.DefaultFunctionCallExpr.evaluate(DefaultFunctionCallExpr.java:184)
     at org.collaxa.thirdparty.jaxen.expr.DefaultXPathExpr.asList(DefaultXPathExpr.java:107)
     at org.collaxa.thirdparty.jaxen.BaseXPath.selectNodesForContext(BaseXPath.java:724)
     at org.collaxa.thirdparty.jaxen.BaseXPath.selectNodes(BaseXPath.java:253)
     at org.collaxa.thirdparty.jaxen.BaseXPath.evaluate(BaseXPath.java:210)
     at com.collaxa.cube.xml.xpath.XPathUtil.evaluate(XPathUtil.java:93)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:501)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:122)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:188)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3408)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1836)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:166)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:252)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5438)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1217)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:511)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
     at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
     at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
     at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
     at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
     at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
     at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
<2006-12-06 19:13:04,751> <ERROR> <UAT.collaxa.cube.xml> ORABPEL-09500
XPath expression failed to execute.
Error while processing xpath expression, the expression is "orcl:query-database(bpws:getVariableData("xpath"), false(), false(), "jdbc:oracle:thin:apps/apps@croaker:1529:RSICMI")", the reason is .
Please verify the xpath query.

Hi,
QAbdul wrote:
when I tried to execute the followingin XMLQuery by calling TO_CHAR() whithin this query I am getting this error"ORA-19237: XP0017 - unable to resolve call to function - fn:TO_CHARTO_CHAR is a SQL function, XQuery is unaware of it.
XPath 2.0 specifications define a fn:format-date function but Oracle has not included yet in its XQuery implementation.
Easiest way to go is A_Non's solution, but if you need to format at multiple places in the query, you can declare a local XQuery function.
For example, to format to "DD/MM/YYYY" from the canonical xs:date format "YYYY-MM-DD" :
{code}
declare function local:format-date($d as xs:date) as xs:string
let $s := xs:string($d)
return concat(
substring($s, 10, 2), "/",
substring($s, 7, 2), "/",
substring($s, 2, 4)
{code}
and an example of use :
{code}
SQL> CREATE TABLE test_xqdate AS SELECT sysdate dt FROM dual;
Table created
SQL> SELECT *
2 FROM XMLTable(
3 'declare function local:format-date($d as xs:date) as xs:string
4 {
5 let $s := xs:string($d)
6 return concat(
7 substring($s, 10, 2), "/",
8 substring($s, 7, 2), "/",
9 substring($s, 2, 4)
10 )
11 }; (: :)
12 for $i in ora:view("TEST_XQDATE")/ROW/DT
13 return element e {
14 attribute xs_date_format { $i/text() },
15 attribute local_format { local:format-date($i) }
16 }'
17 COLUMNS
18 xs_date_format VARCHAR2(10) PATH '@xs_date_format',
19 local_format VARCHAR2(10) PATH '@local_format'
20 )
21 ;
XS_DATE_FORMAT LOCAL_FORMAT
2010-10-28 28/10/2010
{code}

Help required in syntax highlighting in xml using tool Syntax

hi
i am using Syntax tool for syntax highlighting of xml in JTextpane. I use complex html style and i want to change the colors of the displayed xml in the tool under complex html like the internet explorer displays in case of xml i want to make my xml like that..

Hi,
use it like this if Fname equals constnat[space] then pass the Constant[space] to Fname else value of Fname as under
................................Constant[]------>
FNAME.............................................Then
>Equals....................................IF -
>FNAME
Constant[].........................................ELSE
.......................................FNAME---->
Constant[] = Constant [ Space ]
Sachin

Highlight loss when using adjustment brush & graduated filter.

Hi
I'm using Lightroom 2.2 on a Mac.
Is anyone else having the same problem? :
When using the graduated filter or adjustment brush on an image it seems to cause some of the top end highlights to burnout, which is rather frustrating as it is usually when I am trying to rein them in a little.
It seems to happen automatically even when not working directly on those areas and I cannot pull them back with the localised adjustment tools themselves.
Any thoughts would be most welcome.
Thanks
Graham

Hi Eric
Thanks for your reply
I've had another look at it... whenever I have a negative exposure setting on the brush or gradient and apply it anywhere in the image it seems to affect the top end highlights throughout the image even if they haven't been clicked on.
It's just a small change but it is frustrating to lose highlight detail when you've worked hard to capture it in camera!
Look forward to hearing from you.
Graham

802.1X PEAP fails when using special characters in login

I am using MS AD & NPS for 802.1X Enterprise authentication with PEAP (no client certificate - MS-CHAPv2 user credentials for login). This works fine for iOS devices on 8.1 (iPhone 5 and iPad mini) and 6.1.6 (iPhone 3GS) when the user has standard "English" ASCII characters in the username and password.
However, when I introduce Unicode special accented characters in the login name or password such as French é/ù or Spanish ñ then after accepting the server cert authentication fails with "Incorrect username or password for <WLAN name>". Windows 7 and CentOS 6.5 laptops have no problem authenticating to the same setup with either "English" credentials or ones with special accented characters. I also tried an old iPod touch on ancient software version and that fails, so its not something recently introduced.
I tried using a different access point (TP-Link instead of Ruckus) and had exactly the same issue, so highly unlikely this is an AP issue.
Then I setup FreeRadius with and see exactly the same issue, so its highly unlikely to be a MS AD/NPS issue.
When comparing a working/failed authentication Wireshark packet capture on the NPS server, I see the failed attempt is missing the last 4 packets in the authentication exchange. The last packet sent is an Access-Challenge from the NPS server and no response from the iOS device, so the NPS server never even sends an Access-Reject. The iOS device appears to have decided it can't resolve the special characters and terminates the authentication attempt.
To me this seems to be an Apple iOS software deficiency when using Unicode special characters in the username or password for 801.2X authentication?

Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.
Developers:
"Submitting Bugs and Feedback
Your feedback goes a long way towards making our products even better. With Apple Bug Reporter, you can submit bug reports or request enhancements to APIs and developer tools."
https://developer.apple.com/bug-reporting/

First words are lost when using Bluetooth voice de...

This happens with any Nokia Nxx or Exx when used with bluetooth HF device, like Nokia HF-300. Is there any solution to this problem? In practice you can hardly use any navigation with bluetooth voice. The delay itself is not a problem but the phone should wait 0.x seconds after opening the line to the HF device. It would be nice if you could configure this kind of delay to the phone.

Is this the case when listening to the radio or music from the phone?
I'd expect it to pick everything up when listening to music from the phone as it's on the same channel (A2DP).
But if you're getting all the nav guidance with a radio mute then that is a huge step forward.
Usually the problem occurs when there is a delay for the mute of the radio followed by the streaming over mono channel.
Message Edited by confiture on 18-May-2009 08:56 PM

Editor for ASP with syntax highlighting? (I use Bluefish)

Is there a decent, simple (or not-so-simple) editor for ASP code? Or, is there a way to get Bluefish to highlight ASP correctly?
Don't suggest VIM. I love it, but I haven't learned the intricacies of it yet.
And, yes, I apologize for writing ASP...

Hi,
this is a short introduction, might help at start:
Starts with some generell settings, please note that I just add these
settings to the files in /usr/share/scite, most of the stuff can also be set in
files in your ~. Refer to scite docs for filenames onn that.
SciTEGlobal.properties: general settings which are mostly scattered over
the file. Find the lines and tweak them.
# I like my Scite with tabs and a statusbar, displaying line and column
tabbar.visible=1
tabbar.hide.one=1
tabbar.multiline=1
statusbar.visible=1
#comment out this line to have it displayed under the textfield not besides
#split.vertical=1
#display line numbers (create enough space for 4 digits)
line.margin.visible=1
line.margin.width=4
# ask b4 automatically reload an altered file on disk
are.you.sure.on.reload=1
# show name and number of my tab in titlebar
title.full.path=1
title.show.buffers=1
# save the buffer state in a file
and reload on startup
save.recent=1
save.session=1
load.on.activate=1
# allows 25 tabs
buffers=25
# I plain hate tabs and using 8 spaces is waste of place
# converts tab hits to spaces
tabsize=2
indent.size=2
use.tabs=0
# some sane fontsettings: - the ! activates pango -> AA fonts
# sets them all to similar sizes and monospace font
# after the if PLAT_GTK these must be tabs in intendation!
if PLAT_GTK
font.base=font:!bitstream vera sans mono,size:9
font.small=font:!bitstream vera sans mono,size:8
font.comment=font:!bitstream vera sans mono,italics,size:9
font.code.comment.box=$(font.comment)
font.code.comment.line=$(font.comment)
font.code.comment.doc=$(font.comment)
font.text=font:!bitstream vera sans mono,size:9
font.text.comment=font:!bitstream vera sans mono,size:8
font.embedded.base=font:!bitstream vera sans mono,size:9
font.embedded.comment=font:!bitstream vera sans mono,size:9
font.monospace=font:!bitstream vera sans mono,size:9
font.vbs=font:!bitstream vera sans mono,italics,size:9
# uuh, netscape - long time not seen, replce with firefox
if PLAT_GTK
command.print.*=a2ps "$(FileNameExt)"
command.scite.help=mozilla-firefox "file://$(SciteDefaultHome)/SciTEDoc.html"
# add a vertical line at column 80
edge.column=80
edge.mode=1
edge.colour=#E0E0E0
go on to html.properties file; to get the advantages you need the php.api
and the phpfunctions.properties from http://scintilla.sourceforge.net/SciTEExtras.html
there you also find api files for ASP
#replace netscape with mozilla-firefox again
if PLAT_GTK
command.go.$(file.patterns.web)=mozilla-firefox "file:///$(FilePath)"
# load the .api file which I downloaded from the web; it contains, per line,
# a short explaination of each command
# $file.patterns.php is defined for *.php and friends by file extensions
api.$(file.patterns.php)=$(SciteDefaultHome)/php.api
# the calltips for the hypertext lexer shall not be case sensitive
calltip.hypertext.ignorecase=1
# define how the calltipps should be parsed, the following is the same as
# the standard anyway, but might be overwritten by some people in SciTEGlobal
calltip.hypertext.parameters.start=(
calltip.hypertext.parameters.end=)
calltip.hypertext.parameters.separators=,
# some calltips have an additionally explaination after the final ")"
# -this makes display them in a second line
calltip.hypertext.end.definition=)
# autocopleter stuff
# defines which type of characters let the autocompletion pop up
autocomplete.hypertext.start.characters=_$(chars.alpha)
# also the autocompletion should not be case sensitive since, grrr php and html
autocomplete.html.ignorecase=1
# extend the "Extras" menu with some commands
# Tidy Checking
command.name.1.$(file.patterns.web)=HTML Tidy Validate
command.1.$(file.patterns.web)=tidy -quiet -errors $(FilePath)
error.select.line=1
# Tidy Cleanup and indent
command.name.2.$(file.patterns.web)=HTML Tidy Cleanup
command.2.$(file.patterns.web)=tidy -i -wrap 80 -m $(FilePath)
# the executed command alternates the file, so it should be saved b4 and must be
# re-read -> activate are.you.sure.on.reload=1 , makes things easier to handle
# !!!! THERE IS NO UNDO ON THIS COMMAND !!!!
command.save.before.1.$(file.patterns.web)=1
command.is.filter.2.$(file.patterns.web)=1
# activate a lint checker for php files
command.name.1.$(file.patterns.php)=Check PHP syntax
command.1.$(file.patterns.php)=php -l $(FilePath)
the tidy doesn't work onClick, but it shows you the errors in line and column
some pictures to show stuff:
the gray edge at column 80 and the php-lint checker in action:
autocomplete code:
the calltip, NOTE: it is wrapped after the ) which was our setting:
calltip.hypertext.end.definition=)
and the delimiter , let highlight the the correct argument:
whoever want's jump in and wikify that, go ahead, leave me a note where
I shall help.
-neri

File not found when using write characters to file

OK, I am missing something really basic here. Whenever I try to use the Write Characters to File function, if I try to give it a path beyond the C:\filename directory, it returns an error. In other words, C:\Dan works, but C:\Dan\Test reurns an error. WHAT am I missing?

Bingo! That is the problem. You have to make sure the directory exists before you attempt to write files to it.
BTW: In LV there is a function for creating folders programatically. A good way to see if a directory exists is to attempt to list its
contents. If the list function returns an error, the directory doesn't exist and you have to create it.
So make use of the error that the file write returns. If you get an error, start at the root of your path and test to see if each level exists, and if not create it. When you have all the folders in place repeat the file save.
Mike...
Message Edited by mikeporter on 05-24-2007 12:55 AM
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can I change the color of the highlighted text when using the FIND function in Terminal?

When searching for text in the Terminal's buffer, the matched text is highlighted using a color which seems to be computed from the background's color. I'm using a black backgroud and the finder's highlighter is grey. How can I change this? I'd like to specify the foreground and background colors of the matching text. I couldn't find an appropriate setting in the terminal's settings, nor in the default settings using the command "defaults".

In my .bashrc file, I have enabled a couple of grep environment variables.
GREP_OPTIONS='--color=always'
GREP_COLOR='00;38;5;226'
The latter is a vivid yellow.
From the shell, I can search my history:

Query taking too long when using bind variable

Hi All,
There is a query in our prod DB which runs very slow (approx 2 hours) when it uses Bind Variables (using JDBC thin client), and when i try passing the variable using TOAD/SQL developer it runs fine.
Explain Plan for running Query
SELECT STATEMENT ALL_ROWSCost: 146 Bytes: 379 Cardinality: 1
     21 SORT ORDER BY Cost: 146 Bytes: 379 Cardinality: 1
          20 NESTED LOOPS Cost: 145 Bytes: 379 Cardinality: 1
               17 HASH JOIN Cost: 22 Bytes: 42,558 Cardinality: 123
                    15 MERGE JOIN CARTESIAN Cost: 15 Bytes: 8,910 Cardinality: 27
                         12 FILTER
                              11 NESTED LOOPS OUTER Cost: 9 Bytes: 316 Cardinality: 1
                                   8 NESTED LOOPS OUTER Cost: 8 Bytes: 290 Cardinality: 1
                                        5 NESTED LOOPS Cost: 6 Bytes: 256 Cardinality: 1
                                             2 TABLE ACCESS BY GLOBAL INDEX ROWID TABLE GDP.GDP_FX_DEALS_INCREMENTOR Cost: 4 Bytes: 28 Cardinality: 1 Partition #: 9 Partition access computed by row location
                                                  1 INDEX RANGE SCAN INDEX GDP.GDP_FX_DEALS_INC_IDX_01 Cost: 3 Cardinality: 1
                                             4 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_FX_DEALS Cost: 2 Bytes: 228 Cardinality: 1
                                                  3 INDEX UNIQUE SCAN INDEX (UNIQUE) GDP.GDP_FX_DEALS_KEY Cost: 1 Cardinality: 1
                                        7 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_FX_DEALS Cost: 2 Bytes: 34 Cardinality: 1
                                             6 INDEX UNIQUE SCAN INDEX (UNIQUE) GDP.GDP_FX_DEALS_KEY Cost: 1 Cardinality: 1
                                   10 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_COUNTERPARTIES Cost: 1 Bytes: 26 Cardinality: 1
                                        9 INDEX UNIQUE SCAN INDEX (UNIQUE) GDP.PK_CPTY Cost: 0 Cardinality: 1
                         14 BUFFER SORT Cost: 14 Bytes: 448 Cardinality: 32
                              13 TABLE ACCESS FULL TABLE GDP.GDP_CITIES Cost: 6 Bytes: 448 Cardinality: 32
                    16 TABLE ACCESS FULL TABLE GDP.GDP_AREAS Cost: 6 Bytes: 2,304 Cardinality: 144
               19 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_PORTFOLIOS Cost: 1 Bytes: 33 Cardinality: 1
                    18 INDEX UNIQUE SCAN INDEX (UNIQUE) GDP.PORTFOLIOS_KEY Cost: 0 Cardinality: 1
Explain Plan for Slow Query
Plan
SELECT STATEMENT ALL_ROWSCost: 11,526,226 Bytes: 119,281,912 Cardinality: 314,728
     21 SORT ORDER BY Cost: 11,526,226 Bytes: 119,281,912 Cardinality: 314,728
          20 HASH JOIN Cost: 11,510,350 Bytes: 119,281,912 Cardinality: 314,728
               2 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_PORTFOLIOS Cost: 1,741 Bytes: 177,540 Cardinality: 5,380
                    1 INDEX FULL SCAN INDEX (UNIQUE) GDP.PORTFOLIOS_KEY Cost: 14 Cardinality: 5,380
               19 HASH JOIN Cost: 11,507,479 Bytes: 87,932,495,360 Cardinality: 254,140,160
                    3 TABLE ACCESS FULL TABLE GDP.GDP_AREAS Cost: 6 Bytes: 2,304 Cardinality: 144
                    18 MERGE JOIN CARTESIAN Cost: 11,506,343 Bytes: 18,602,733,930 Cardinality: 56,371,921
                         15 FILTER
                              14 HASH JOIN RIGHT OUTER Cost: 3,930,405 Bytes: 556,672,868 Cardinality: 1,761,623
                                   5 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_COUNTERPARTIES Cost: 6,763 Bytes: 892,580 Cardinality: 34,330
                                        4 INDEX FULL SCAN INDEX (UNIQUE) GDP.PK_CPTY Cost: 63 Cardinality: 34,330
                                   13 HASH JOIN OUTER Cost: 3,923,634 Bytes: 510,870,670 Cardinality: 1,761,623
                                        10 HASH JOIN Cost: 2,096,894 Bytes: 450,975,488 Cardinality: 1,761,623
                                             7 TABLE ACCESS BY GLOBAL INDEX ROWID TABLE GDP.GDP_FX_DEALS_INCREMENTOR Cost: 2,763 Bytes: 52,083,248 Cardinality: 1,860,116 Partition #: 14 Partition access computed by row location
                                                  6 INDEX RANGE SCAN INDEX GDP.GDP_FX_DEALS_INC_IDX_01 Cost: 480 Cardinality: 334,821
                                             9 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_FX_DEALS Cost: 1,734,205 Bytes: 8,320,076,820 Cardinality: 36,491,565
                                                  8 INDEX FULL SCAN INDEX (UNIQUE) GDP.GDP_FX_DEALS_KEY Cost: 104,335 Cardinality: 39,200,838
                                        12 TABLE ACCESS BY INDEX ROWID TABLE GDP.GDP_FX_DEALS Cost: 1,733,836 Bytes: 1,331,145,696 Cardinality: 39,151,344
                                             11 INDEX FULL SCAN INDEX (UNIQUE) GDP.GDP_FX_DEALS_KEY Cost: 104,335 Cardinality: 39,200,838
                         17 BUFFER SORT Cost: 11,499,580 Bytes: 448 Cardinality: 32
                              16 TABLE ACCESS FULL TABLE GDP.GDP_CITIES Cost: 4 Bytes: 448 Cardinality: 32
How can I avoid that.
Thanks

Hello
Could you reformat your execution plans because they aren't particularly readable. The forums allow you to preserve the formatting of code or output by putting the symbol {noformat}{noformat} before and after the section of text you want to preserve formatting for.
If you write
{noformat}select * from v$version
{noformat}
it will be displayed asselect * from v$version
So can you run this above statement and post the output here so we know the full oracle version you are working with? And finally, it would be really helpful to see the query you are running. When you say it runs fine in Toad, is that when you replace the bind variables with the values or are you also using bind variables in Toad?
Cheers
David

Query takes 5 min when using Indexes and 1 Second without Indexes !!

Hi,
We have been using indexes on all tables until recently when we faced problems with queries like the one below:
SELECT a.std_id FROM students a, student_degree b, student_course c, course d
WHERE b.std_id = a.std_id
AND c.std_id = a.std_id
AND d.crn = c.crn
AND b.in_progress = 'Y'
AND b.major_code = 'ABTC'
AND a.program_code = 'DP'
AND a.level_code = 'S2'
AND a.campus_code = '05'
AND a.termcode = '200702';
This query takes more than 5 minutes to return a result, but as soon as we remove indexes on the columns termcode and campus_code,it shows result in 1 second.
What could be the problem ?, Is there an attribute that need to be set when creating these indexes ?
Thanks in advance
Madani

Thank you Karthik for your reply.Here are the explain plan report (as shown on Oracle 9i Enterprise Manager)
*1-Explain plan without Indexes:*
Execution Steps:
Step # Step Name
11 SELECT STATEMENT
10 MERGE JOIN
7 SORT [JOIN]
6 NESTED LOOPS
4 NESTED LOOPS
1 ERMS.STUDENT_DEGREE TABLE ACCESS [FULL]
3 ERMS.STUDENTS TABLE ACCESS [BY INDEX ROWID]
2 ERMS.SYS_C006642 INDEX [UNIQUE SCAN]
5 ERMS.SYS_C007065 INDEX [RANGE SCAN]
9 SORT [JOIN]
8 ERMS.COURSE TABLE ACCESS [FULL]
Step # Description
1 This plan step retrieves all rows from table STUDENT_DEGREE.
2 This plan step retrieves a single ROWID from the B*-tree index SYS_C006642.
3 This plan step retrieves rows from table STUDENTS through ROWID(s) returned by an index.
4 This plan step joins two sets of rows by iterating over the driving, or outer, row set (the first child of the join) and, for each row, carrying out the steps of the inner row set (the second child). Corresponding pairs of rows are tested against the join condition specified in the query's WHERE clause.
5 This plan step retrieves one or more ROWIDs in ascending order by scanning the B*-tree index SYS_C007065.
6 This plan step joins two sets of rows by iterating over the driving, or outer, row set (the first child of the join) and, for each row, carrying out the steps of the inner row set (the second child). Corresponding pairs of rows are tested against the join condition specified in the query's WHERE clause.
7 This plan step accepts a row set (its only child) and sorts it in preparation for a merge-join operation.
8 This plan step retrieves all rows from table COURSE.
9 This plan step accepts a row set (its only child) and sorts it in preparation for a merge-join operation.
10 This plan step accepts two sets of rows sorted on the join key. By walking both sets of rows in the order of the join key, every distinct pair of rows satisfying the join condition in the WHERE clause is found through a single pass of the row sets.
11 This plan step designates this statement as a SELECT statement.
*2-Explain plan with Indexes:* (I added index on column campus_code which is a varchar2 column)
Execution Steps:
Step # Step Name
11 SELECT STATEMENT
10 MERGE JOIN
7 SORT [JOIN]
6 NESTED LOOPS
4 NESTED LOOPS
1 ERMS.COURSE TABLE ACCESS [FULL]
3 ERMS.STUDENTS TABLE ACCESS [BY INDEX ROWID]
2 ERMS.INDEX_STUDENTS_CAMPUS_CODE INDEX [RANGE SCAN]
5 ERMS.SYS_C007065 INDEX [RANGE SCAN]
9 SORT [JOIN]
8 ERMS.STUDENT_DEGREE TABLE ACCESS [FULL]
Step # Description
1 This plan step retrieves all rows from table COURSE.
2 This plan step retrieves one or more ROWIDs in ascending order by scanning the B*-tree index INDEX_STUDENTS_CAMPUS_CODE.
3 This plan step retrieves rows from table STUDENTS through ROWID(s) returned by an index.
4 This plan step joins two sets of rows by iterating over the driving, or outer, row set (the first child of the join) and, for each row, carrying out the steps of the inner row set (the second child). Corresponding pairs of rows are tested against the join condition specified in the query's WHERE clause.
5 This plan step retrieves one or more ROWIDs in ascending order by scanning the B*-tree index SYS_C007065.
6 This plan step joins two sets of rows by iterating over the driving, or outer, row set (the first child of the join) and, for each row, carrying out the steps of the inner row set (the second child). Corresponding pairs of rows are tested against the join condition specified in the query's WHERE clause.
7 This plan step accepts a row set (its only child) and sorts it in preparation for a merge-join operation.
8 This plan step retrieves all rows from table STUDENT_DEGREE.
9 This plan step accepts a row set (its only child) and sorts it in preparation for a merge-join operation.
10 This plan step accepts two sets of rows sorted on the join key. By walking both sets of rows in the order of the join key, every distinct pair of rows satisfying the join condition in the WHERE clause is found through a single pass of the row sets.
11 This plan step designates this statement as a SELECT statement.

Content Query not producing results when using [Me] filter

Hi
I'm using a Content Query web part and I'm trying to show the most recent document modified by each site user by applying it across the site collection and using the Filter, Modified By [_Hidden] equals [Me]. However, this doesn't seem to work for any user
- the web part is always blank. I have tried different combinations such changing equals to contains, and using the Modified By field etc - nothing gives me the correct results. If I instead take the [Me] out and instead use the "people chooser"
and set to a specific person then I seem to get the results I would expect - however I cannot hard code a given user.
Does anyone know how to use [Me] correctly?
Thanks

Hi sjb500,
According to your description, please take steps as below to meet your demand:
With the page layout open in Design view, double-click the Content Query Web Part.
In the Content Query Web Part dialog box, click the plus sign (+) next to Query to expand it.
In the Source section, click Show items from all sites in this site collection.
In List Type section, in the Show items from this list type, click Document Library.
In the Content Type section, in the Show items of this content type group list, click Document
Content Types.
In the Content Type section, in the Show items of this content type list, click Document.
In the Additional Filters section, under Show Items When, click Modified By [_Hidden] in
the first box, click Is Equal To in the second box, and then click [Me].
In the Content Query Web Part dialog box, click the plus sign (+) next to Presentation to expand it.
In the Grouping and Sorting section, in the Sort items by list, click Modified
and Select Show items in descending order.
Click OK.
Reference:http://office.microsoft.com/en-us/sharepoint-designer-help/display-data-from-multiple-lists-with-the-content-query-web-part-HA010174134.aspx
[Me] is a variable that stands for the user who is currently viewing the page that contains the Content Query Web Part in the browser.
Here is some scenarios using [Me] in Content Query Web Part:
http://social.technet.microsoft.com/Forums/en-US/346ffbe6-d7ba-467e-b7f5-6d6e289677a1/user-tasks-web-part
Please inform me freely if you have any questions.
Thanks

Query syntax highlighting lost when using national characters.

Similar Messages

Maybe you are looking for