Query to check ASM usage on multiple servers

Is there information in the grid control database that I can query to find the total size and used space for instances of ASM? I am running Cloud Control 12.1.0.2 and monitoring 25+ servers all with ASM instances. We have alerting that will send notifications when they get to a certain used percentage but I would like to generate a report that lists all ASM diskgroups that I can email to myself and another DBA.
I am pretty new to digging into the tables and views withing the cloud control database so any help would be appreciated.

Below is my blog post the few post I have on reports using data in OEM are back in June. The other one you may like the is similar to my ASM report is the database storage.
http://cloudcontrol12c.blogspot.com

Similar Messages

High memory usage in SQL Servers

Hi,
I have few SQL servers which are having memory utilization more than 95% when checked in task manager.
Servers OS - Windows server 2008 R2
SQL Sever 2008 and SQL Server 2012
AWE option is not enabled, Min memory setting - 1 GB and Max memory setting - 80% of the total memory in server.
SQL process is using less than max memory, when checked in task manager. So i was thinking where is remaining memory.
Used RAMMAP tool and found memory in AWE, even if i disabled AWE in SQL Server. Please let me know how to avoid AWE.

Hi,
Task manager does not always show you correct value so I would advise you not to loot at task manager but in this case since you SQL Server service account does not have Locked pages in memory privilege(LPIM) task manager can be referred
please use below query to see SQL Server memory utilization
select
(physical_memory_in_use_kb/1024)Memory_usedby_Sqlserver_MB,
(locked_page_allocations_kb/1024 )Locked_pages_used_Sqlserver_MB,
(total_virtual_address_space_kb/1024 )Total_VAS_in_MB,
process_physical_memory_low,
process_virtual_memory_low
from sys. dm_os_process_memory
Is your SQL server 64 bit version, then no need to enable AWE option.
Its totally normal behavior for SQL Server to utilize memory. It can also utilize memory greater that what is limit in max server memory setting as this only controls buffer pool allocation.
You can reduce max server memory value IF you really want SQL Server memory utilization in tak manager to come down. But I would again say its normal.
What is max server memory value anyway?
How much you have left for OS on atleast 5-6 G id required for OS. Value may vary.
>>SQL process is using less than max memory, when checked in task manager. So i was thinking where is remaining memory
SQL Server caches memory to store as much data and index pages(in memory) as possible to avoid any physical I/O which is costly and once taken memory it will not release unless SQLOS asks it to do so . It will start trimming its mmeory consumption when
SQLOS says it to do because of some memory pressure or other requirement. The process is totally dynamic and is managed perfectly so you dont need to worry.
More about SQL Server memory and troubleshooting
http://social.technet.microsoft.com/wiki/contents/articles/22316.sql-server-memory-and-troubleshooting.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to stop sql services and sql agent services on multiple servers

Looking for a t-sql/powershell script to stop/start sql services on multiple servers. Plan is to execute script from centralized server.
Rahul

see
http://www.databasejournal.com/features/mssql/article.php/3644906/Automatically-Stopping-and-Restarting-SQL-Server.htm
http://sqlpowershell.wordpress.com/2013/04/11/powershell-check-start-and-stop-sql-services-of-a-remote-servers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Separating a database onto multiple servers

We are working on a product that uses a set of SQL Server databases that are currently all in one instance and on one server. Now that we are growing, we need more processing power/space. So we want to move the databases onto multiple servers.
So we would not need to "shard", we created separate databases (with the same schema) for each company that purchased the product. We could readily put different company databases onto the different servers.
The question is this, how to we handle the routing to the different servers?
If we would have "sharded" the data in one database with different keys, SQL Server tools would have handled the routing for us. Because we actually separated the databases, do we have to do the routing manually? (That is, do we need to figure
out that when company A logs in that they need to go to database server aa.aa.aa while compay B needs to go to server bb.bb.bb?) Or is there a product that can help us with the routing?
Thanks!
www.insteptech.com ;
msmvps.com/blogs/deborahk
We are volunteers and ask only that if we are able to help you, that you mark our reply as your answer. THANKS!

Hello,
Based on your description, it seems that you want to copy all schema from a "Shared" database into other servers and separate data into the tables based on the company name.
If I understand correctly, you can try to use the
SQL Server Import and Export Data Wizard to copy data from table or view to destination server and specify query to restrict data for copy. Or you can use linked server and
SELECT INTO statement with condition to move the data.
As per my understanding about the "Handling routing", balancing capability. In order to meet your requirement, you have to load balance through your application's design.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Using MDT and Thin installer on multiple servers

Is there a way to configure the thininstaller.exe.configuration to point to a dynamic path. We have multiple locations where MDT is deployed, and we don't want the PC to connect over our WAN links when the Thin Installer runs.
I thought I read somewhere that in the file I could do something like this:
<Default Gateway>
     <10.10.1.1=\\Location1\repository>
     <10.10.2.1=\\Location2\repository>
     <10.10.3.1=\\Location3\repository>
     <*.*.*.*=\\DefaultLocation\repository>
I checked the Integrating ThinkVantage Update and Retriever and ThinInstaller with MDT 2010, but the part that talks about configuring the file makes no mention of using multiple servers.
Thanks

There is not a mechansim as you describe built into ThinInstaller. There are, however, various ways you can invoke Thin Installer which might accommodate your end goal.
Usually people that have this need have some kind of data value on the target device that lets them know which repository they should be pulling from. Sometimes a network share is used and that share is established earlier in the deployment process to point to a local server. Sometimes an environment variable is used. The command line of ThinInstaller allows for you to specify the path to the repository at execution time. The calling of ThinInstaller can be performed by a script or cmd file that determines the correct repository path to pass to ThinInstaller.
You can find more details on controlling ThinInstaller in this document: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvsu4_mst_en.pdf
Without knowing a lot more details about your environment I'm not sure how to better guide you. You might try posting in the Enterprise / IT Management forum and see if any of the folks there have done this already.

IcedTea High CPU usage and multiple jobs created

High CPU usage and multiple jobs created while streaming data via a java applet from a secure/certified website. CPU usage is normal for a few minutes then suddenly jobs multiply and CPU usage climbs on one of the jobs.
Jobs with the following command begin to multiply in my job queue with one job showing CPU usage at 368% and staying resident in memory (yeah, a long one):
/usr/lib/jvm/java-7-openjdk/jre/bin/java -Xbootclasspath/a:/usr/share/icedtea-web/netx.jar:/usr/share/icedtea-web/plugin.jar:/usr/share/java/js.jar: -classpath /usr/lib/jvm/java-7-openjdk/jre/lib/rt.jar sun.applet.PluginMain /run/user/1000/icedteaplugin-tbattist-SZ3xKO/7160-icedteanp-plugin-to-appletviewer /run/user/1000/icedteaplugin-tbattist-SZ3xKO/7160-icedteanp-appletviewer-to-plugin /run/user/1000/icedteaplugin-tbattist-SZ3xKO/7160-icedteanp-plugin-debug-to-appletviewer
I have the following java packages installed on my system:
local/icedtea-web-java7 1.5-1
local/jdk7-openjdk 7.u51_2.4.6-1
local/jre7-openjdk 7.u51_2.4.6-1
local/jre7-openjdk-headless 7.u51_2.4.6-1
I also get the following message in my system log when starting to stream:
Apr 11 12:26:18 saturn logger[7872]: IcedTea-Web java error manual log:
Apr 11 12:26:18 saturn logger[7873]: Application title was not found in manifest. Check with application vendor
Apr 11 12:26:37 saturn logger[7883]: IcedTea-Web java error - for more info see itweb-settings debug options or console. See http://icedtea.classpath.org/wiki/IcedTea-Web#Filing_bugs for help.
Anybody having this issue or clue on what to do? I am wondering if recent changes to openssl (heartbleed) might have java change ramifications? Should I submit bug to Icedtea?
FYI - My system:
Processor : 4x AMD A8-3870 APU with Radeon(tm) HD Graphics
Memory : 7646MB (2518MB used)
Operating System : Arch Linux 3.14.0-4
OpenGL Renderer : Gallium 0.4 on AMD SUMO
X11 Vendor : The X.Org Foundation

...further research and learning.
Here is a good tutorial on Java. Evidently, what I called "jobs" is referred to as processes and threads in this tutorial. The tutorial states that multithreaded execution is an essential feature of the Java platform which explains the avalanche of threads I observe. However, I am still stumped at what causes the avalanche of threads and excessive CPU consumption for such a mediocre task. Also the system log says that IcedTea has an error stating "Application title was not found in manifest. Check with application vendor". I interpret this to mean that IcedTea does not recognized some application. What application? .....the applet?

Standard Report to check consumption values for multiple materials

Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
Swapnil

Dear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF                 Material analysis: Dates
MCPO                 Material analysis: Quantities
MCPW                 Material analysis: Lead time
Regards
Mangalraj.S

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to set up Planning on Multiple Servers

Hi,
1) I am trying to install a Finance Planning application so that it runs on one Planning Web Server and the other operations Planning application on another Planning 9.3.1 web server. Is that possilbe?
2) May be unrelated question:
HP_Windows_Install.pdf has only a few lines explaining how to set up Planning on Multiple Servers. Is it as simple as that?
Here are the "few lines" from install.pdf:
Perform the same installation and configuration process on your secondary servers, making sure to choose
Planning Web Server component for any secondary server.
Make sure you select Reuse existing tables when prompted during the Configure a Database task
in the Configuration utility.

Tomcat.
But it will be nice to know the steps for Weblogic too - as Weblogic will be bundled "free" with future releases of Planning.

Managing multiple servers

Not sure what i am looking for at the moment but we have 6 * solaris 9 servers, 5 * solaris 10, about 30 zones and it's only going to get bigger.
it's become a real pain to manage(add,remove,keep track) users across multiple server/zones. How do other people go about managing multiple servers i for one don't want to log into each box/ zone and create a user accout which is currently what we do.
Guess what i am looking for is some way of managing all of our boxes from a central point.

Using a directory service like NIS or LDAP will allow user accounts for many hosts to be created and managed centrally. LDAP is what Active Directory is based on. Sun's implementation is called iPlanet. Sun One Directory Server, or Java Directory service, depending on the phases of the moon.
For spotting problems on servers (disk full, host down, &c), we use nagios. It's fantastic.
My employer also spent a good deal of money on opsware, but shall we say the benefits of it are not yet obvious.

Check Payment Processing Across Multiple Operating Units

Hi There
We are currently implementing Oracle R12 at the company I work for. Our solution implementer has informed us that you cannot process one check (cheque) payment across multiple operating units and that this is an outstanding enhancement with Oracle. Therefore (if we accept) this we will have to process a seperate check per operating unit which will increase our payment processing significantly.
Can anyone out there:
A. Confirm this is indeed an issue
B. Are you aware if Oracle are doing anything about it and
C. Is there any workaround that we could consider to lessen the impact.
Thanks

Hi,
Scenario 1
If you are going to make Single check payment to the same supplier having different sites under various operating units, oracle has provided a workaround, i.e. to make a manual payment in payables module, however it would not generate any payment instruction.
Scenario 2
If you are going to make single check payment to various suppliers in different/same operating units, it is not allowed by Oracle, as there is no logic behind it. You cannot have 1 check generated for different suppliers ...
I am assuming you are referring to Scenario 1, in which case, i would say there is an WORKAROUND suggested by Oracle to make use of MANUAL PAYMENT method, which you could discuss with your Solution Implementer.
Regards,
Ivruksha

Query to check BP Payment terms and Document Payment terms

Hi All,
Can any one help me to create an approval query to check the BP payment terms and Document Payment terms are same or not?
Normally we change our BP payment terms regularly as per the agreements between Customer and us.
but when we copy any previous document into invoice it calculate the Due date as per previous payment terms. so we need an query to check wether the BP payment terms and document Payment terms are same or not? if it is different they it should ask for authorization from manager or else the document should be saved.
Thanks in Advance,
Prachi.

Hi
I will test this and will let you know if it works or not?
Thank you very much.
Prachi.

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

Folder Comparison from multiple servers

I need to compare folders from multiple servers which do not have direct connection so i was trying to generate a text file with command dir /b /s >c:\server1.txt and feed them to script to compare.
my desired output is csv file in the following format
File name,Server1,server2,server3,is it missng file?
File1,yes,yes,yes,No
file2,Yes,Yes,No,Yes
File3,Yes,No,Yes,Yes
File4,No,Yes,Yes,Yes
these folders contains few hundred thousand files and the script is taking 4 to 5 hours to run the comparison. i thought threads will help to run fast using parallel processng but did not help. i have no expreience with threads and after searching for examples
and implementing it was even slower than normal.
i probably am doing something wrong. Any help is much appreciated.
The following is the script so far and it works fine but its taking long time.
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$list.count
$index = 0
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
write-host $listfilename
#$StrContent = get-content $listfilename
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$StrContent.count
$contentArray[$index].count
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist + $contentArray[$i]
$allfileslist.count
$uniquefileslist = $allfileslist | sort-object | get-unique
$Stroutline = "File Name,"
foreach($srvlistitem in $srvlist){
$Stroutline = $Stroutline + $srvlistitem.ToUpper() + ","
$Stroutline = $Stroutline + "Is it Missing file?"
Write-Output $Stroutline | Out-File "$reportName" -Force
foreach($uniquefileslistitem in $uniquefileslist){
$Stroutline = ""
$missingfile = "No"
$Stroutline = $uniquefileslistitem + ","
for($i=0;$i -lt $index;$i++){
if($contentArray[$i] -contains $uniquefileslistitem){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
Write-Output $Stroutline | Out-File "$reportName" -Force -Append
$j++
Following is the script i modified using threads example. this is running even slower.
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$list.count
$index = 0
#$contentArray = New-Object 'object[,]' $xDim, $yDim
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
write-host $listfilename
#$StrContent = get-content $listfilename
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$StrContent.count
$contentArray[$index].count
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist+ $contentArray[$i]
$allfileslist.count
#$uniquefileslist = $allfileslist | select –unique
get-date
$uniquefileslist = $allfileslist | sort-object | get-unique
$uniquefileslist.count
get-date
$Stroutline = "File Name,"
foreach($srvlistitem in $srvlist){
$Stroutline = $Stroutline + $srvlistitem.ToUpper() + ","
$Stroutline = $Stroutline + "Is it Missing file?"
Write-Output $Stroutline | Out-File "$reportName" -Force
$j = 1
$count = $uniquefileslist.count
$stroutput = ""
$maxConcurrent = 50
$results= ""
$PauseTime = 1
$uniquefileslist | %{
while ((Get-Job -State Running).Count -ge $maxConcurrent) {Start-Sleep -seconds $PauseTime}
$job = start-job -argumentList $_,$contentArray,$index -scriptblock {
$StrArgFileName = $args[0]
$ArgContentArray = $args[1]
$ArgIndex = $args[2]
$Stroutline = ""
$missingfile = "No"
$Stroutline = $StrArgFileName + ","
for($i=0;$i -lt $ArgIndex;$i++){
if($ArgContentArray[$i] -contains $StrArgFileName){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
$Stroutline
While (Get-Job -State "Running")
Start-Sleep 1
$results = Get-Job | Receive-Job
$results
$stroutput = $stroutput + "`n" + $results
Remove-Job *
Write-Output $stroutput | Out-File "$reportName" -Force -Append
Thank you very much!
Vamsi.

no i am not comparing the number of lines.. count i used was only for my information... it has nothing to do with the compare. here is the script with out count...
[array]$contentArray = @()
[array]$allfileslist = @()
[array]$uniquefileslist = @()
[array]$allfilesSRVlist = @()
[array]$srvlist = @()
$FolderName = Split-Path -parent $MyInvocation.MyCommand.Definition
$reportName = $FolderName + "\ComparisonReport3.csv"
$ListOfFiles = get-childitem $FolderName
$List = $ListOfFiles | where {$_.extension -ieq ".txt"}
$index = 0
foreach($listitem in $List){
$listfilename = $listitem.FullName
$listname = $listitem.Name
$listname = $listname.replace(".txt","")
$srvlist = $srvlist + $listname
$StrContent = [io.file]::ReadAllLines($listfilename)
$contentArray += ,@($StrContent)
$index = $index + 1
for($i = 0;$i -lt $index;$i++){
$allfileslist = $allfileslist+ $contentArray[$i]
$uniquefileslist = $allfileslist | sort-object | get-unique
$strfinal = "File Name,"
foreach($srvlistitem in $srvlist){
$strfinal = $strfinal + $srvlistitem.ToUpper() + ","
$strfinal = $strfinal + "Is it Missing file?"
foreach($uniquefileslistitem in $uniquefileslist){
$missingfile = "No"
$Stroutline = $uniquefileslistitem + ","
for($i=0;$i -lt $index;$i++){
if($contentArray[$i] -contains $uniquefileslistitem){
$Stroutline = $Stroutline + "Yes,"
else{
$Stroutline = $Stroutline + "No,"
$missingfile = "Yes"
$Stroutline = $Stroutline + $missingfile
$strfinal = $strfinal + "`n" + $Stroutline
Write-Output $strfinal | Out-File "$reportName" -Force -Append
if you want to test it... just create two text files and put them in the same folder as the script.
server1.txt will have the following content
filename1
filename2
filename3
server2.txt will have the following content
filename1
filename2
filename4
it should generate the csv file ComparisonReport3.csv
filename,server1,server2,Is it Missing file?
filename1,yes,yes,no
filename2,yes,yes,no
filename3,yes,no,yes
filename4,no,yes,yes

Query to check ASM usage on multiple servers

Similar Messages

Maybe you are looking for