Query with key figures on separte lines

Hello bw experts. I have a query question. I am building a query with several structures going down the left side and I want two sets of key figures going across (jan through Dec). That is easy but what I cannot figure out is how to get key figure 1 to be on line 1 jan through dec and key figure 2 to be on line 2 (jan through dec) I want key figure 1 to show on the line with plan and key figure 2 to show on the line with actual
Jan Feb Mar Apr etc. etc.
plan
actual
Thanks in advance for any and all help
Jim

Hi,
When you go for the Cell Editor option, this particular scenario would be pretty easy to achieve and apart from why don't you try for putting the month field in Column and the Plan & Actual Structures in the Rows.
Regards,
Mani

Similar Messages

Query on 0IC_C03 with key figures 0valstckqty and 0valstckval

Hello Gurus,
I want to make a query on 0IC_C03 with key figures 0valstckqty and 0valstckval for a single month eg October 2011. I have 0plant in rows. The problem is that I just see the key figures for planst which have movements in October 2011.
I dont want choose all months in global filter to get key figures for all plants.
How can I solve this problem?
Jesper

Jesper-
You're looking at a "Transactional" info cube. That means that the query you create will ONLY provide data for a selected period in which data exists. Plants with no movements will not appear. That's how it's supposed to work.
Now... you can create a hidden selection in your columns. For example:
First column (hidden)... 0valstckqty + 0valstckval. No other restrictions
Second column (visible) 0valstckqty restricted to the date range of interest
Third column (visible) 0valstckval restricted to the date range of interest
be sure to NOT suppress Zero rows.
Plants that never had a transaction will, however, not appear at all. The query will also take a long time to execute because it's extracting all data.
The best solution is to explain to your user that it's working the way it's supposed to.. if a plant has no values then there were no transactions.

Report Painter - Characteristic cannot be combined with key figures

Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
Rekha

There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha

Report painter- Characteristic can not be maintained with key figures

We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
Any help to figure out what step is missing will be highly appreciated.
This is a PS report painter report using PS database profile in the selection of parameters for the report
Thanks

The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

Error GR410: characteristic cannot be combined with key figures

Hi,
My problem is in Report Painter.
I need to add selection by trading partner (or by vendor) in report 6OBU-001. For this Iu2018ve modified reporting table RWCOOM, in order to make available characteristic RASSC in the library 6O2.
Iu2019ve added Trading partner in General selection of my own report (copy of 6OBU-001), but RP gives an error message: u201CCharacteristic RASSC cannot be combined with key figures. Check the report definition: the key figures used must be compatible with characteristic RASSC. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.u201D
Any opinions are truly appreciated.
Anton

I read this note before, but I still don't know how to write a ABAP code.
I need information from table COEP like sum of qunatity or costs. I have this information for Cost Elements and Orders in CCSS but I don't have for Materials.

Query Designer - Key Figures on the Rows

Hi experts,
I inserted in a query the key figures into the rows.
I would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.
Can anyone help me?
TIA
c.

Hi,
I developed the couple of reports but iam able to see the text in char and can u tell me where is the option to see key and text for keyfigure.if not is not theere explanin little bit and busines requirement
would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.

Long text problem in BW query and Key figure name

Hello
We're using SAP BO 4.0 (IDT) and SAP BW as a datasource. Maybe someone knows:
1. How to change the name of keyfigure, which now appears as Formula 1, Formula 2 etc. In BW every single key figure has it's own name Sales, Purchases etc. What I'm missing here?
2.As you well might know every single char infoobject has it's own Long\Short\medium which now appears as an attribute. When I choose multiple Long definitions then the execution of a BEx query fails with 'Inconsistent answers'. In Universe Designer we can change the objects name, but how to proceed here. Do I need to change something on a Bex query level?
I'm well familiar with SAP BO, but due to lack of experience in SAP I'' ve hit astumbling block with these 2 things> Any assistance would be more than welcome
Thanks in advace

Hi,
for (1) - that doesn't sound right... i think your KF are calculated KF (CKF) possibly with a formulae variable .. or something, which is supposed to populate the name, based on a user response ?
Or maybe you've got non-unique KF descriptions, and this is some system imposed nomenclature?
for (2) i'm not so sure, but you may have to change the infoobject text setting, globally, in RSA1. webi won't like non-unique labels if the keys are different.. How does it look with the default 'key and text' (medium) setting?
yes you can change the characteristic display properties in Bex query designer, but i have a funny feeling that it doesn't get consumed by webi over that API. (it's native OLAP stuff for BEx really...)
Good luck
H

Problems with Key Figure and Drilldown

Good day to you, experts. Several of our reports are required to include a key figure which shows a percentage value. The Query must show something similar to the following (please ignore the "-"):
Total Products---Products Sold--
Percentage sold
Shop A / Jan--5020--
40%
Shop B / Jan--2828--
100%
Shop C / Jan--10030--
30%
TOTALS / Jan--17878--
56.66%
We can see this information for all months. As you can see, it shows the "Shop" Characteristic as well as the Calendar Month (or year, or year/month). The information is updated monthly. The percentage total is calculated as average.
So far so good. The problem is that whenever I take away the Calendar Month characteristic (in order to see this information summarized and not detailed by month), the "Percentage Sold" Key Figure (which is loaded along with the rest of the information, not calculated in the Query) shows strange data, something like this:
Total Products---Products Sold--
Percentage sold
Shop A--250140--
220%
Shop B--108100--
454%
Shop C--466180--
150%
TOTALS--824420--
274.66%
So as long as I keep the most detailed information on the table, it is displayed correctly, and as soon as I take away any of the details (it also happens with the Shop characteristic), the percentage sold displays wrong data. I have tried displaying individual values differently. I also tried using a formula to calculate the percentage sold, which appeared to solve this issue, but after testing it I found that the data on "TOTALS" was incorrect both with and without the monthly detail. This issue has become quite urgent as we are supposed to publish these reports very soon.
Any ideas for solving this issue?

Hi, thanks for the quick reply. I forgot to mention that. As I wrote before, this percentage is given to us directly in the file that is loaded on the system, but since there were problems when taking away a characteristic from the table, I created a formula which should give us the same data. The formula is Percentage = "Products Sold / Total Products" (I used the Percentage part operator, so it looks like this "Products Sold %A Total Products"). The TOTALS value is validated with the person in charge of giving us the file to load.
A sample data record:
DATE--SHOP_ID-DEPT-PRODUCTS-SOLD---PCT.
20080101--125020--
40
Edited by: Pedro Olvera on Aug 1, 2008 12:21 PM

Filter query on Key Figures

How can I filter a query based on Key Figures? When I use conditions, the results totals don't change. I need the results to reflect the filtered data.

Angie,
There is no standard functionality to achieve this, but you can do it using formulas.
To check the problem:
E.g. You have
Material Qty Value
A           1      100
B           2      300
C           4      1000
Result    7      1400
You want to be able to filter out Materials with Qty less than 2 so you are left with just Materials B and C and the result shows Qty 6, Value 1300.
Create a formula, say 'QtyH'.
The formula detail should be: Qty > 1
This formula will display 1 for Materials B and C, Zero for Material A.
Create a second formula, say 'Qty Filtered'.
Formula detail needs to be QtyH * Qty.
Change Calculations tab to Calculate Results as Total.
This formula will display Zero for Material A, 2 for B and 4 for C.
Result row will show 6.
Repeat for the Value KF.
To simplify this you can actually combine the logic in 'QtyH' and 'Qty Filtered' into one Formula. See SAP Help under Defining New Queries; Defining Formulas, Boolean Operators
Also, if instead of QtyH being Qty > 1, you use a Formula Variable, you can give users the option to specify what filter level they want.
E.g. Qty > 'MyFormulaVariable' where the formula variable is created as Manual Input/Default Value.
Hope this helps!

BEx Broadcaster Send button - No Broadcast Wizard with Key Figures in Rows

Working in BI 7.0 SP 16, we are having an issue with BEx Broadcaster. For a typical horizontal query (key figures in columns), the send button in BEx on the Portal works properly and returns the Broadcasting Wizard. However, when using a query in a vertical format (key figures in rows), the window opended by the send button displays the "spinning wheel" and never procceds on to the Broadcasting Wizard.
I have checked for SAP notes related to BEx Broadcaster and was not able to find anything relevant.
The same query was tested with the key figures in columns and in rows. The Broadcast Wizard comes up when the key figures are in columns, but not in rows. Since it was tested both ways with the same query, I am assuming that the issue is related to the orientation (horizontal vs. vertical).
Has anyone else run into this issue? Is there a known limitation, or a patch available? Does anyone have a BI system with a query you could flip the key figures from columns to rows and give it a try?
thanks,
-Shawn

Shawn,
I'm having my own issues with BEx Broadcaster in the Portal, but from BEx Query Designer - Query - Publish - BEx Broadcaster, the BEx Broadcaster Wizard is available in both cases (Key figures in columns and key figures in rows).
Kim

Bex Query calc key figures in Crystal report not showing technical names.

Hi,
I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
Please urgent help requested.
Thanks
Mahendra

I dont have an account on such website. I will explain u the problem in detail.
When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
If u see it its a wier 25 digit name.
Instead of this I want to see
{ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

Upload Flat file to Infocube with key figures of type FLOAT

Dear Experts,
I need your help in the following issue : I want to upload a flat file(csv) to an infocube. Two of the key figures are of type FLOAT. In the flat file the amount are in the format number with 4 decimals. eg 0.0445. When I upload the data, although I have NO errors, the key figures show value 0. (BW system is 3.5).
How should I declare these numbers in the excel file?
Thanks in advance for your help
Regards
Dina

Problem solved. I just uploaded the file first to a ODS and then to the infocube and everything worked ok.
The mystery of BW!!!
Dina

How do you create a Header with Key Figures underneath

In Query Designer in BI 7.0, is there a way to create multiple Headers and then have different key figures listed underneath each header. For example,
Header 1
    Key Figure 1
    Key Figure 2
Header 2
    Key Figure 3
Thanks.
Amy

report designer will do the job for you since you are in 7.0, that should be easier.
Thanks
Wond

FI report - query on key figures

Hi all,
I need to develop a FI report where I have GL a/c in rows and period to date and year to date balances as the key figures. Report should look like:
GLa/c--Period to date balance-----year to date balance
1--1000--
2000
2--400--
1000
3--600--
For GL a/c 1 and 2, I need to display both key figures but for GL a/c 3, I only need period to date balance since it is a P&L account. Basically, for all GL accounts in my system, I need to display year to date balance but the ones in range 400000 till 999999, I need to display period to date balance, since these are P&L GLs.
How can I acheive this?
Thanks,
Nitika

For your "year to balance" key figure create a RKF and restrict GL account with exclusion of 400000 till 999999 range along with your key figure.
This should make it display 0.
Hope this helps.

Problems with key figure quantities between ODS and PSA

We have some key figures which are part of the purchasing transactional load. The key figure in some cases is showing the correct total value for the ordering unit in the PSA but incorrect in the ODS (there is no transformation logic). This seems to happen when an ordering unit exists but a base unit of measure does not exist? Has anyone had similar and how to resolve? Thanks

Hi, thanks for the quick reply. I forgot to mention that. As I wrote before, this percentage is given to us directly in the file that is loaded on the system, but since there were problems when taking away a characteristic from the table, I created a formula which should give us the same data. The formula is Percentage = "Products Sold / Total Products" (I used the Percentage part operator, so it looks like this "Products Sold %A Total Products"). The TOTALS value is validated with the person in charge of giving us the file to load.
A sample data record:
DATE--SHOP_ID-DEPT-PRODUCTS-SOLD---PCT.
20080101--125020--
40
Edited by: Pedro Olvera on Aug 1, 2008 12:21 PM

Query with key figures on separte lines

Similar Messages

Maybe you are looking for