Question about fx:Script

Hi,
I have a form using many functions of calculations in fx:Script.
Can I create a separate file with part of my fx:script? it is getting to long.
If I can separate this file, can I use this in a different form?
Thanks!

You can use the source property:
<fx:Script source="scripts.as"/>

Similar Messages

Question about calculation script 'Fix'

Hi Guys,
I have a question about calculation script 'Fix'. Below is the sample for my question:
Dimension 'Period' has members '2009','2010','2011'. We want to Fix the data which 'Period' is not '2009'.
From Database Administrator's Guide we could use @NOTEQUAL, but version 11.1.1.3.0 seems not support @NOTEQUAL.
Actually, the dimension is dynamic so we cannot use the way fixing other memebers. What should I do for this requirement?
Edited by: 842270 on Apr 24, 2011 7:29 PM

842270 wrote:
Hi Guys,
I have a question about calculation script 'Fix'. Below is the sample for my question:
Dimension 'Period' has members '2009','2010','2011'. We want to Fix the data which 'Period' is not '2009'.
From Database Administrator's Guide we could use @NOTEQUAL, but version 11.1.1.3.0 seems not support @NOTEQUAL.
Actually, the dimension is dynamic so we cannot use the way fixing other memebers. What should I do for this requirement?
Edited by: 842270 on Apr 24, 2011 7:29 PMYou can use @Remove command to avoid 2009.
@REMOVE
Removes values or members in one list from another list.
Syntax
+@REMOVE (list1, list2)+
Parameter Description
list1
+ A list of member specifications, from which the members specified in list2 are removed.+
list2
A list of member specifications to be removed from list1.

Question about multiple Script declarations

I'm reading Flash Builder 4 and Flex 4 Bible.
On page 121 it states:
"Any particular <fx:Script> element can contain nested ActionScript or use the source property to link to an external Actionscript file, but it cannot do both at the same time. You can, however, have as many <Script> declarations in a single MXML file as you need>"
My questions are about the last sentence.
1) They specifically used <fx:Script> and <Script>. Are these two different entities?
2) I've never seen examples of using multiple <fx:Script> declarations in a project. How would this work?
3) Are they promoting bad practices by making this claim?
Thank you
Kristin

Although multiple script tags are allowed, I'd guess that they're not commonly used.
Gordon Smith
Adobe Flex SDK Team

Question about simple script?

Hello,
I would like to write a small program/script and am looking for advice on how to do so. I do not have a preference about which method or language to use, hopefully looking for the simplest way to do this (if it works with Windows or DOS command line this is
preferable).
I have a program that runs on text files e.g. "program file1.txt file2.txt"
I have 20 folders that each have 5-10 text files. I want to automatically get the name of the largest size text file from each of the 20 folders, and then run the program on these 20 files as described above.
Ideally I could point my script to a folder, and it will automatically find the largest .txt file in each of the subdirectories and run "program file1.txt file2.txt file3.txt ..."
Any ideas on how to most efficiently accomplish this? Ideas or links to tutorials if applicable are helpful.
Thank you

Yes this is very helpful, thank you so much. I have a couple of questions:
What I am doing is actually running a perl wrapper that calls a java program, so my command looks something like this and it works fine if I enter multiple full path file names without quotes:
perl Program C:\Folder1\Subfolder1\file1.txt C:\Folder1\Subfolder2\file2.txt C:\Folder1\Subfolder3\file3.txt
The script as you described above does exactly what I am hoping for. For the $Path variable, I would like to either
1) have this script begin from the directory that is it run from so if I copied it to C:\Folder1\ then it would run the command as shown above, or
2) allow for a parameter to be passed to it with the path of the directory to begin from e.g. "powershellscript.ps C:\Folder1"
How would I go about doing this?
So I believe the last line of this script would be:
perl Program ($Results -join " ")
Does this make sense? If so I will give it a try. Thanks again.

Question about unix script

Hi all,
I know this is not the question for this forum but in case :)) if somebody knows.
I have a shell script to run this completely I need to enter two times if I run it mannually. Now I want to automate that script and want to call that script from another script. Will anybody tell me how to automate 2nd carriage RETURN.
Thanks in Advance
Aqil

> It doesnot give me any error but it doesnt work.
When I asked "Does that work?" I meant does that approach work in general? i.e. can you ever have a background command as the subject of a here-document construction? I don't see how that could work, because once the command is kicked off in background in a separate process, how can you feed the rest of the input to it? It would make more sense to write
needcarriagereturn.sh <<END
END
) &or
function runmyscript
needcarriagereturn.sh<<-END
END
runmyscript &or perhaps
echo | needcarriagereturn.sh &Message was edited by:
William Robertson
Ignore the ">" character in the middle example. The forum software adds it for some reason.

Question about using script library

Dear Mavens,
I am writing a script that has lots of predefined text items because it deals with reprocessing certain javascript files.
Here is an example from the beginning of the script (with the actual javascript code mangled because it seems to mess up the display):
set sdinTXTcf_imgsrc to "<i_mg src=dfaasfaf"<P>
set sdinTXTcf_onload to " onLoad="p_arent.frames[1].readystate(sfsafasfads"
set sdinTXTcf_inBetween to "</d_iv>');
} else {
parent.frames[0].document.write('<div align="c_enter"><img src=\""
this section is now getting quite long and I thought of putting it into an external file. What I was hoping to do is to load all these "set this to that" commands into my script then use them as if they had been defined in it.
The following is a toy script to demonstrate my problem.
I wrote a mini library which ilooks thusly:
set var1 to "VAR1"
set var22 to "VAR22"
set var333 to "VAR333"
Then a mini script that calls the mini library:
load script file "whatever:toylib.scpt"
get var1
The result is
tell current application
load script file "whatever:toyscript.scpt"
set var1 to "VAR1"
set var22 to "VAR22"
set var333 to "VAR333"
"The variable var1 is not defined."
setting up var1 as global does not help either, either in the scrip or in the library
Now, I can set up the mini library script as a subroutine to be called, such as
on toy()
set var1 to "VAR1"
set var22 to "VAR22"
set var333 to "VAR333"
return {v1:var1, v22:var22, v333:var333}
end toy
and in the main scipt I can do a
set loaded to load script file "whatever:toylib.scpt"
tell loaded
set var1 to v1 of toy()
end tell
get var1
which works but it is actually more cumbersome than simply having to scroll down dozens of lines of code on the top of the script.
I'm sure I'm missing somethig here, your help will be appreaciated
Mac OS X (10.4.8)

Hi Asu,
There are several ways to do this. The easiest is to
use properties. Your script library might look like
this:
property var1 : "VAR1"
property var22 : "VAR22"
property var333 : "VAR333"
You might load it and get values like this as an
example:
set f to choose file -- the script to load
set s_lib to load script f
var22 of s_lib
Note that this is not the only syntax.
When you do things like 'set' in the script library,
you need to run the loaded script or subroutines
within it.
gl,
It worked. THANKS!

Question about PHP scripting

i just did a PHP script for a web form, it works fine that
when i press submit, it displays the page said "thanks for
submitting," but the problem is i never receive the email of the
data, any idea?

I agree with GarryCT that you should try a simple test (no
HTML) to see
if you can send mail at all. If that succeeds, then try
building it up
to the point you're hoping for.
When sending HTML mail, you /might/ want to consider
including a plain
text version and sending multi-part email.
Anyway, here are some comments I have for the code posted
here:
Try
temporarily turning on display errors.
> <?php
ini_set('error_reporting', E_ALL);
ini_set('display_errors', 1);
> /*subject and email variables*/
> $subject = 'php scripting';
> $me = 'my email';
> /*gathering data variables*/
> $name1 = $_POST ['name1'];
> $name2 = $_POST ['name2'];
> $email = $_POST ['email'];
> $company = $_POST ['company'];
> $brief = $_POST ['brief'];
>
> $body = <<<EOD
> <br><HR><br>
> First Name: $name1 <br>
> Last Name: $name2 <br>
> E-mail Address: $email <br>
> Company: $company <br>
> Brief: $brief <br>
> EOD;
Hopefully, that indent was caused by the Web forum.
Otherwise, EOD;
should be at the very start of the line - no white space[1].
EOD;
> $headers = "From: $mail\r\n";
You have not assigned a value to $mail. Some hosts require
this to be
an address in your domain. Try using your $me variable here
(assuming
it is a valid email address from this domain).
> $headers .= "Content-type: text /html\r\n";
Try removing that extra space. You might also need to add
mime
version[2]. Does order make a difference? Try this for the
$headers
variable:
$headers = 'MIME-Version: 1.0' . "\r\n";
$headers .= 'Content-type: text/html; charset=iso-8859-1' .
"\r\n";
$headers .= "From: $me\r\n";
> $success = mail($me, $subject, $body, $headers);
You are not acting on the TRUE/FALSE result stored in
$success.
Everything after this point assumes mail was accepted for
delivery. Of
course, TRUE does not necessarily mean the mail actually got
to its
intended destination[2], FALSE does indicate that it was not
delivered
at all.
> /*results rendered as HTML*/
> $theResults = <<<EOD
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
> </head>
> <body>Thanks for your time, we'll get back to you
within a day.
> </body>
> </html>
> EOD;
Hopefully, that indent was caused by the Web forum.
Otherwise, EOD;
should be at the very start of the line - no white space[1].
EOD;
> echo "$theResults";
> ?>
[1]
http://php.net/echo (see "here
document" in examples.)
[2]
http://php.net/function.mail
Mark A. Boyd
Keep-On-Learnin' :)

[SOLVED]A simple question about bash scripting

Just for fun, I thought I'd try making Arch as "parent friendly" as possible (i.e., easy to use once set up). I've already made a nifty little "system maintenance" script that presents you with a "select" bash menu, with options being "Install, Remove, Update [Without AUR, with AUR, abs, exit], Search, Install and Search (using Yaourt), and exit"
That works wonderfully, and it only requires typing "sm" into the terminal.
But just to make it yet *more* "parent friendly", I thought I'd make a .desktop file.
This is the problem.
I want the shortcut to essentially open up the script in a terminal. So it would have to execute, say, "xterm" and then open the "sm" script within the called terminal.
I believe this would mean I need to either add something to my "sm" script or make a new script that opens terminal and calls sm.
I'm sure this has an easy solution, but I'm a total amateur just having some fun.
Any suggestions?
Last edited by hwkiller (2010-07-13 00:32:48)

I am not a 100% on .desktop files since I never use them.
but if your command in the desktop file is something like
xterm -e /path/to/your/sm/file
that should work.
EDIT: Bah too late !
Last edited by Inxsible (2010-07-12 19:27:11)

A question about action script 2

hi all , i do a game with as2 (its an escape game) i have stuck somewhere in as 2. if u help me i will be glad.İ am begginer at flash yet pls help
i use this code for i take the item to my inv:
its object code in my inv:
onClipEvent (load) {
            this.tabEnabled = false;
            this._visible = false;
            orig_x = this._x;
            orig_y = this._y;
on (press) {
            this.startDrag();
on (release) {
            this.stopDrag();
            this._x = orig_x;
            this._y = orig_y;
if (eval(this._droptarget) == _level0.yuk) {
                        _global.lantern = 1;
                        this._visible = false;
_level0.gotoAndStop(5);
its normal object code:
onClipEvent (load) {
            this.tabEnabled = false;
            if (_global.lantern == 1) {
                        this._visible = false;
on (release) {
            _global.lantern = 1;
            this._visible = false;
            _level0.lantern_inv._visible = true;
problem is that my objects doesnt show everyframe in my inventory.
e.t.c. in frame 1:i take object to my inventory but in second frame:it doesnt show in inventory i wanna player can take object his inv and use it other rooms in my game didnt able to solve the prob. with layers if u help me i will be glad.
(sorry for eng)

i solved problem with that:
i used variables and after that i dont see two times to my objects at any frame.Coz variable was work.i did keyframes my all frames at layers.Last time i deleted my objects from other frames
finally:i take one object from 1st frame , use it at 3th frame.Works for now thanx for help
if i paste my codes to timeline it says:this codes only work for movie clips e.t.c. problem solved for now i hope.
i like you all ! alwayz need your help

A question about SAP script

Consider a main window, can its width & length be changed/different with first page?

Most of the time main window in first page will have diffrent position and second page onwards it will have diffrent position .
one example :
sales order details - want to print layout form
requirement will be customer address should be in first page and body will be in first page and next page also.
first page - we will print customer address and body
next page onwards we will not print customer address and main window will have more space ,so here we need assign diffrent position.

Question about DBCA generate script o create RAC database 2 node cluster

Question about creating two node RAC database 11g after installing and configuration 11g clusterware. I've used DBCA to generate script to create a rac database. I've set
environment variable ORACLE_SID=RAC and the creating script creates instance of RAC1 and RAC2. My understanding is that each node will represent a node, however there should only be one database with a name of 'RAC'. Please advise

You are getting your terminology mixed up.
You only have one database. Take a look, there are one set of datafiles on shared storage.
You have 2 instances which are accessing one database.
Database name is RAC. Instance names are RAC1, RAC2, etc, etc.
Also, if you look at the listener configuration and if your tnsnames is setup properly then connecting to RAC will connect you to either one of the instances wheras connecting to RAC1 will connect you to that instance.

Simple question about mount and delay script

Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
Colin

BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Few questions about upgrading database

Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanks

udayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

Question about fx:Script

Similar Messages

Maybe you are looking for