Question on PMCO Table

Hi All,
I have some doubts related to PMCO Table .. I have an order for which confirmation been done as on todays date , 26th April 2011 ..but in PMCO it is reflecting in WRT05 .. here i believe it should reflect in WRT03 for April ... but not sure Y it is reflecting in WRT05 .....i am looking for getting PMCO Costs as per period wise .., any inputs on how to get PMCO cost by period wise ...would be helpful ..
regrds
pm

Hi,
You can get period wise cost in COST table. Check the below link.
TABLE ENTRY FOR ACTIVITY COST/VALUE
Regards,
Maheswaran.

Similar Messages

Question on using table types in methods

Hi
I have a simple question involving passing table types in method
I want to pass an internal table by reference - to a method and within the method populate the internal table (t1) using a select * into the internal table and then sort t1 by f1 and f2. t1 is an internal table based on a ABAP dictionary table ( at1 )
Question is : If I use a generic type TABLE declaration , it does not allow sort operation specifically by fields. If I use type at1 as in
the METHODS M1 exporting t1 type at1statement, syntax error is - t1 is not an internal table.
How do I achieve the above using the method implementation ?
Sample code that I try
CLASS C1 DEFINITION
PUBLIC SECTION
METHODS M1 exporting t1 type table
ENDMETHOD
ENDCLASS
CLASS C1 IMPLEMENTATION
METHOD M1
select * from at1 into t1.
sort t1 field f1 f2
ENDCLASS

You should define a TABLE TYPE based upon the data dictionary type (at1) either in the data dictionary using SE11 or in the TYPES section of the class.
Then define the parameter of this new type.
Cheers
Graham Robbo

Question about Update Tables

Hello Gurus,
I have a question about "update table" entries. I read somewhere that an entry in update table is done at the time of the OLTP transaction. Is this correct? If so, does this happen on a V1 update or V2 update? Please clarify. Similarly, an entry in the "extraction queue" (incase you are using "queued delta" will happen on V1 update. I just want to get a clarification on both these methods. Any help in this matter is highly appreciated.
Thanks,
Sreekanth

Hi
update tables are temporary table that are refreshed by v3 job.update table is like buffer, it gets filled after updation of application table and statistical table through v1 v2 update . we can bypass this process by delta methods.
M Kalpana

0FI-CA module, cube 0FC_C08 & 0FC_C09 dataflow? question abt filling tables

Hello all,
We are currently working on BI7.0 and ERP6.0. I am trying to understand the data flow for these two cubes 0FC_C08 and 0FC_C09.
When I see the data flow in BW, I see there is an infosource 0FC_BP_ITEMS, which feeds to DSO 0FC_DS05 which feeds to DSO's 0FC_DS06 (Open Items) and 0FC_DS07 (Cleared Items) which feed to 0FC_C08 and (Open items) and 0FC_C09 (Cleared items).
0FC_BP_ITEMS -> 0FC_DS05 -> 0FC_DS06 and 0FC_DS07 -> 0FC_C08 and 0FC_C09...
Now what I am looking for is what do these two datasources feed to ?
0FC_CI_01    FICA Cleared Items for Interval
0FC_OP_01 FI-CA Open Items at Key Date
Also I have another question like:
1.      Run tcode FPBW that fills data to table DFKKOPBW, and then you will see data in RSA6 for datasource 0FC_OP_01.
2.     Run tcode FPCIBW that fills data to table DFKKCIBW, and then you will see data in RSA6 for datasource 0FC_CI_01.
My question is do we have to do this on periodic basis or do we have to do it every time before we run infopackage to load data in BW? What are the key dates or date interval we can use for those two tcodes?
Please anyone who has worked on it can give some ideas
Thanks all for your help in advance.
Kiran
Edited by: Kiran Mehendale on May 16, 2008 4:40 PM

0FC_CI_01 FICA Cleared Items for Interval
--This Data Source will feed InfoCube: 0PSCD_C01
and
0FC_OP_01 FI-CA Open Items at Key Date
--This Datasource will feed infoCube: InfoCube: 0PSCD_C02
http://help.sap.com/saphelp_nw70/helpdata/EN/41/3d30113dfe6410e10000000a114b54/frameset.htm
From this link you will be able to check out the data sources as well as any information on the infocubes.
hope this helps.
Matt

Follow-up question on ZXM08U16 table E_TDRSEG (function group XM08)

Rich's suggestion worked (on how to retype the E_TDRSEG table received from MIRO by include ZXM08U16 in the function group XM08.
Before asking my new follow-up question, let me recap the original SAP typing of this table and the way I've retyped it (following Rich's instructions):
The original SAP typing is:
E_TDRSEG TYPE MMCR_TDRSEG
TYPES: mmcr_tdrseg TYPE mmcr_drseg OCCURS 0,
TYPES: BEGIN OF mmcr_drseg_co.
        INCLUDE STRUCTURE cobl_mrm_d.
TYPES: cr LIKE drseg_cr    OCCURS 0,
       unpl_refwr TYPE refwr,
       END OF mmcr_drseg_co.
TYPES: BEGIN OF mmcr_drseg.
        INCLUDE STRUCTURE drseg.
TYPES: cr LIKE drseg_cr OCCURS 0,
       co TYPE mmcr_drseg_co OCCURS 0,
       sm LIKE drseg_sm OCCURS 0,
       charact TYPE rbcharact_instance OCCURS 3,
                                       "instances of characteristics
       uebgmat TYPE matnr,
       uebrblgp TYPE rblgp,
       selkz_db TYPE selkz,
       rblgp_old TYPE rblgp,           "rblgp before aggregation
       END OF mmcr_drseg.
I retyped this as follows:
TYPES:
ty_cobl_mrm_d        TYPE cobl_mrm_d,
ty_drseg_cr          TYPE STANDARD TABLE OF drseg_cr with DEFAULT KEY,
ty_drseg_sm          TYPE STANDARD TABLE OF drseg_sm with DEFAULT KEY,
ty_charact           TYPE STANDARD TABLE OF rbcharact_instance with DEFAULT KEY,
BEGIN OF ty_mmcr_drseg_co.
    INCLUDE            TYPE ty_cobl_mrm_d.
    TYPES:
      cr               TYPE ty_drseg_cr ,
      unpl_refwr       TYPE refwr,
END OF   ty_mmcr_drseg_co,
ty_co                TYPE STANDARD TABLE OF ty_mmcr_drseg_co
                       WITH DEFAULT KEY,
BEGIN OF ty_mmcr_drseg.
    INCLUDE            TYPE drseg.
    TYPES:
      cr               TYPE ty_drseg_cr,
      co               TYPE ty_co,
      sm               TYPE ty_drseg_sm,
      charact          TYPE ty_charact,        "instances of characteristics
      uebgmat          TYPE matnr,
      uebrblgp         TYPE rblgp,
      selkz_db         TYPE selkz,
      rblgp_old        TYPE rblgp,             "rblgp before aggregation
END OF   ty_mmcr_drseg.
DATA:
    x_mmcr_drseg       TYPE mmcr_drseg,
    x_mmcr_drseg_oo    TYPE ty_mmcr_drseg,
    it_mmcr_drseg      TYPE STANDARD TABLE OF ty_mmcr_drseg,
    x_drseg_cr         TYPE drseg_cr,
    x_drseg_sm         TYPE drseg_sm,
    x_drseg_co         TYPE ty_mmcr_drseg_co.
But here's my question. To load the new table from the SAP table, I've had to use the code below. Is there any way to simplify this code? (I don't think there is because the drseg structure is included in the old and the new, so you can't simply say new-drseg = old-drseg. But maybe there's another way to do it and I'm not seeing it. Also, note that I had to loop on each of the inner three tables because it wouldn't compile when I tried statements of the form "new-table[] = old-table[].)
LOOP AT e_tdrseg INTO x_mmcr_drseg.
    x_mmcr_drseg_oo-anln1     = x_mmcr_drseg-anln1.
    x_mmcr_drseg_oo-anln2     = x_mmcr_drseg-anln2.
    x_mmcr_drseg_oo-aplzl     = x_mmcr_drseg-aplzl.
    x_mmcr_drseg_oo-arewr     = x_mmcr_drseg-arewr.
    x_mmcr_drseg_oo-areww     = x_mmcr_drseg-areww.
    x_mmcr_drseg_oo-aufnr     = x_mmcr_drseg-aufnr.
    x_mmcr_drseg_oo-aufpl     = x_mmcr_drseg-aufpl.
    x_mmcr_drseg_oo-basme     = x_mmcr_drseg-aufpl.
    x_mmcr_drseg_oo-bedat     = x_mmcr_drseg-bedat.
    x_mmcr_drseg_oo-begru     = x_mmcr_drseg-begru.
    x_mmcr_drseg_oo-bewae     = x_mmcr_drseg-bewae.
    x_mmcr_drseg_oo-ekgrp     = x_mmcr_drseg-ekgrp.
    x_mmcr_drseg_oo-bpmng     = x_mmcr_drseg-bpmng.
    x_mmcr_drseg_oo-bprme     = x_mmcr_drseg-bprme.
    x_mmcr_drseg_oo-bpumn     = x_mmcr_drseg-bprme.
    x_mmcr_drseg_oo-bpumz     = x_mmcr_drseg-bpumz.
    x_mmcr_drseg_oo-bpwem     = x_mmcr_drseg-bpwem.
    x_mmcr_drseg_oo-bprem     = x_mmcr_drseg-bprem.
    x_mmcr_drseg_oo-bsmng     = x_mmcr_drseg-bsmng.
    x_mmcr_drseg_oo-budat     = x_mmcr_drseg-budat.
    x_mmcr_drseg_oo-bukrs     = x_mmcr_drseg-bukrs.
    x_mmcr_drseg_oo-bwtar     = x_mmcr_drseg-bwtar.
    LOOP at x_mmcr_drseg-cr INTO x_drseg_cr.
      APPEND x_drseg_cr TO x_mmcr_drseg_oo-cr.
    ENDLOOP..
    LOOP at x_mmcr_drseg-co INTO x_drseg_co.
      APPEND x_drseg_co TO x_mmcr_drseg_oo-co.
    ENDLOOP..
    LOOP at x_mmcr_drseg-sm INTO x_drseg_sm.
      APPEND x_drseg_sm TO x_mmcr_drseg_oo-sm.
    ENDLOOP..
    x_mmcr_drseg_oo-charact   = x_mmcr_drseg-charact.
    x_mmcr_drseg_oo-uebgmat   = x_mmcr_drseg-uebgmat.
    x_mmcr_drseg_oo-uebrblgp = x_mmcr_drseg-uebrblgp.
    x_mmcr_drseg_oo-selkz_db = x_mmcr_drseg-selkz_db.
    x_mmcr_drseg_oo-rblgp_old = x_mmcr_drseg-rblgp_old.
ENDLOOP.

Hi
I don't think, I'm agree with you, u can only replace some statament:
LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
X_MMCR_DRSEG_OO-CR[]      = X_MMCR_DRSEG-CR[].
X_MMCR_DRSEG_OO-CO[]      = X_MMCR_DRSEG-CO[].
X_MMCR_DRSEG_OO-SM[]      = X_MMCR_DRSEG-SM[].
X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
X_MMCR_DRSEG_OO-UEBRBLGP = X_MMCR_DRSEG-UEBRBLGP.
X_MMCR_DRSEG_OO-SELKZ_DB = X_MMCR_DRSEG-SELKZ_DB.
X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
ENDLOOP.
If you want to use APPEND statament u need to refresh the target table at very loop:
LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
REFRESH: X_MMCR_DRSEG_OO-CR,
           X_MMCR_DRSEG_OO-CO,
           X_MMCR_DRSEG_OO-SM.
APPEND LINES OF: X_MMCR_DRSEG-CR TO X_MMCR_DRSEG_OO-CR,
                   X_MMCR_DRSEG-CO TO X_MMCR_DRSEG_OO-CO
                   X_MMCR_DRSEG-SM TO X_MMCR_DRSEG_OO-SM.
X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
X_MMCR_DRSEG_OO-UEBRBLGP = X_MMCR_DRSEG-UEBRBLGP.
X_MMCR_DRSEG_OO-SELKZ_DB = X_MMCR_DRSEG-SELKZ_DB.
X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
ENDLOOP.
Max

Question about selection table analysis

Dear All,
My last post was closed by the moderator so I would like to ask a different question. Please apologize if my question is trivial.
1. There is a selection table seltab with one fields of type I, with the following contents:
I     GT     3     0
I     NE     8     0
The literature eg. ABAP Objects says that the control statement like IF or CASE can be used with logical expression IN.
Now I am checking if the variable test fulfills the conditions defined by the selection table.
DO 10 TIMES.
IF test IN seltab.
    write test.
ENDIF
test = test + 1.
ENDDO.
As a result I get a full list of values.
1 2 3 4 5 6 7 8 9 10
2. Now, if the table contains
I     GT     3     0
I get
4 5 6 7 8 10 as expected
3. If the table seltab contains
I     NE     3     0
the result also seems to be ok
1 2 4 5 6 7 8 9 10
The final question is. Is it true that the logical expression IN cannot be used with IF for more complex data comparisions?
Thanks,
Grzegorz

Well, the contents
I GT 3 0
I NE 8 0
I read as:
the variable fulfills the condition if is greater than 3 and not equal 8
test > 3 and
test <> 8
which should give the result from the example above a list
4 5 6 7 9 10
What is wrong with my analysis?
Regards,
Grzegorz

Question about GLPCA table

hi gurus,
i need to find a relation between profit center and G/L account to do same reporting on charges by profit centers.
in table GLPCA i have the fields i need, but i have a question: are all the charges traced in this table (GLPCA) ? in other words are all the vendors invoices present in this table.
Thank you.

Only for those entries in which profit center is assigned.
Eg :Say expenses or revenue for which profit center is assigned directly. only the expenses line item(i.e Dr) or revenue line item (i.e CR) alone will be there in GLPCA.
But in BSEG you can find both the entries(Dr & Cr) for the same doc, which you cant find in GLPCA.
Hope you understood.
else revert
Reg
Sujai

Silly question on dual table

Hello gurus
This dual table is a dummy table with varchar2(1)....my question is how it can select many psedocolumns from dual doesn't it exceed the allowed space of varchar2(1)
Edited by: 964145 on Oct 9, 2012 5:35 PM

>
it cannot be a real table
>
Not sure why you say that.
The DDL for it is in the dcore.bsq file (11.2) in the rdbms/admin folder
create table dual /* pl/sql's standard pckg requires dual. */
(dummy varchar2(1)) /* note, the optimizer knows sys.dual is single row */
storage (initial 1)
insert into dual values ('X')
/See the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/queries009.htm#SQLRF20036
>
Selecting from the DUAL Table
DUAL is a table automatically created by Oracle Database along with the data dictionary. DUAL is in the schema of the user SYS but is accessible by the name DUAL to all users. It has one column, DUMMY, defined to be VARCHAR2(1), and contains one row with a value X. Selecting from the DUAL table is useful for computing a constant expression with the SELECT statement. Because DUAL has only one row, the constant is returned only once. Alternatively, you can select a constant, pseudocolumn, or expression from any table, but the value will be returned as many times as there are rows in the table. Refer to "About SQL Functions" for many examples of selecting a constant value from DUAL.
>
And the Database Concepts doc
http://docs.oracle.com/cd/B28359_01/server.111/b28318/datadict.htm
>
The DUAL Table
The table named DUAL is a small table in the data dictionary that Oracle Database and user-written programs can reference to guarantee a known result. This table has one column called DUMMY and one row containing the value X.
>
And those pseudo-columns you ask about
>
select sysdate,UID,rowid from dual;
>
You can query those from any table but as the doc quote above says you will get as many values as there are rows in the table.

QUESTION ON INTERNAL TABLE

HELLOW TO ALL.
Q. HOW TO DISPLAY THE INTERNAL TABLE DATA IN TABLAR FORMAT ?

Moderator message - Welcome to SCN
Unfortunately, this forum is not a place to learn ABAP. I suggest that you get one of the good ABAP books that are out there and maybe join an internet forum that caters to beginners.
Do not use all caps.
Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Thread locked.
Rob

Question on EDPAR table structure??

Hi SAP-EDI experts,
I have a simple question.
My EDI customer number is 100100.
This parent EDI customer has number of ship-to codes.
Ship-to codes          -         SAP Number
GF01                      -         100101
GF02                      -         100102
GF03                      -         100103
GF0N                      -         10010N
How should i fill the EDPAR table using transaction VOE4.
Someone please fill this table.
Customer - External Function - External Partner - Internal Number
Thanks and awaiting your reply,
Creasy Matt

Thanks for your quick reply.
But my question what values i have to put under each column.
Can some please fill that table and show me which value go under which column.
I have given 4 columns in my first post.
Thanks and awaiting your reply,
Creasy Matt

Question on Creating table from another table and copying the partition str

Dear All,
I want to know whether is there any way where we can create a table using another table and have the partitions of the new table to be exactly like the used table.
Like
CREATE TABLE TEST AS SELECT * FROM TEMP;
The table TEMP is having range and hash partitions.
Is there any way when we use the above command, we get the table partitions of TEMP to be copied to the new table TEST.
Appreciate your suggestions on this one.
Thanks,
Madhu K.

may this answer your question...
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:595568200346856483
Ravi Kumar

Question on Exporting Table Stats to another database

I have a question exporting Table Stats from one schema in database A to another schema in another database B.
Currently running Oracle 9.0.2.6 for unix in both prod and dev.
Currently table stats are gathered using the ANALYZE TABLE command. We currently don't use the DBMS_STATS package to gather table statistics.
Question:
If I execute DBMS_STATS.EXPORT_TABLE_STATS in database A can I import them to database B if I'm only using the ANALYZE TABLE to gather table stats? Do I need to execute the DBMS_STATS.GATHER_TABLE_STATS package in database A prior to excuting DBMS_STATS.EXPORT_TABLE_STATS ?
The overall goal is to take table stats from Production in its current state and import them into a Development environment to be used for testing data / processes.
Yes we will be upgrading to Oracle 10 / 11g in near future.
Yes we will be changing our method of gathering table stats by using the DBMS_STATS package.
Thanks,
Russ D

Hi,
If I execute DBMS_STATS.EXPORT_TABLE_STATS in database A can I import them to database B if I'm only using the ANALYZE TABLE to gather table stats? You need using the DBMS_STAT package for get and export statistics process if you want migrate the stats to other database.
Do I need to execute the DBMS_STATS.GATHER_TABLE_STATS package in database A prior to excuting DBMS_STATS.EXPORT_TABLE_STATS ?Yes, you need executing first DBMS_STATS.GATHER_TABLE_STATS.
Good luck.
Regards.

Question Related to table or view privilages ?????

Hi,
I have written a stored procedure under my schema, it queries data from production table or view. when i run this Stored procedure(SP) it gives me error saying "table or view does not exist".
But when i try to query(i,e select * from XYZ(prod.table)) from this prod table or view outside the SP it runs fine and queries the data.
My intial question was i didnt had privilage to access the table, but when i query outside the SP it runs fine. So there is permission for my ID to access the table. But why m i getting this error, Any idea please ???
Your help is greatly appriciated!!!! Thank you so much!!!

Using the default "definer rights" model, the owner of the stored SQL (view, procedure, trigger, method, etc) must have the required privileges granted directly to them and not obtain them via a role.
The reason is that a role can be disabled in one session while enabled in a different session (for the same user). The database only relies on a privs that are consistent across all sessions. Those privs granted directly WILL be consistent across all sessions.
Using the "invoker rights" model (AUTHID CURRENT_USER), this direct grant restriction does not apply.
So, either declare AUTHID CURRENT_USER in your stored SQL header, or grant the privs directly to the owner of the SQL.

How to create PMCO table entries for few PM Order

Hi Experts
By a lack of Customizing we have used for few day a PM order type without the flelds AFKO-KLVARP and AFKO-KLVARI set.
For this missing setting no entris had been created during Creation and Confirmation in PMCO and PMCOQT tables.
Now I've filled teh fields with a Zreport on AFKO table, but now I need to create the PMCO* data using RIPMCO00 report.
Unfortunately it doesn't work. Is there a way to re-build this missing datas ???
Thanks for your help.
Claudio
Edited by: Claudio Carrara on Feb 15, 2012 3:48 PM

Run the program RIPMCO00, has no effect because tables PMCO and PMCOQT are empty for these order.
This hapepns becuase when the Order was confirmed, teh fields AFKO-KLVARP and AFKO-KLVARI was null.
Now I've fixed these fiels, and I need to rebuild PMCO datas, burt report doesn't work because PMCO and PMCOQT tables are empty.
I need to create PMCO and PMCOQT entries in advance.
How I can proceed ???
Thanks
Claudio

Questions on Structured table

Hello ABAP Gurus,
Kindly explain the difference between the Structured table and transparent table.
and how to add field in a structured table?
Any help is appreciated.
Thank you very much!

hi,
Structure does'nt hold any data.it is just a collection of fields.
Table Holds data.it contains fields and data.
Fields are contained in table.
In structure-only runtime values can be stored
In table-can store data permanently
In fields-group of entry/data which r placed in ordered manner within table
check the links
http://www.sap-img.com/abap/the-different-types-of-sap-tables.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/Internal-Tables
http://www.scribd.com/doc/454570/Total-SAP-Tables
http://wiki.ittoolbox.com/index.php/Find_data_in_your_SAP_system_and_know_which_tables_do_what
Thanks and regards,
prasanth

Question on PMCO Table

Similar Messages

Maybe you are looking for