Question regarding different sizes of movies posted to Mobile Me

I am using iMovie '08 and just published a 10 min movie in both large and medium
sizes. The question is: "Does publishing different sized movies increase the amount of storage used by the move on the Mobile Me cloud?"
Specifically, if I publish a movie in Large format, then publish the same movie
in Medium, or Mobile size, do the additional sizes add to the amount of storage
used in the cloud?
Also, it seems that there is no way to remove an already published size selectively. For example, if I have a Large and Medium size published for the
same movie, can I remove the only the Large size. (Keeping the Medium on the cloud?) I could not find a way to do this. This may be irrelevant if there is minimal or no impact on used storage to publish in lower sized formats.
Any light that can be shed on this would be very helpful.

Thanks again. This solved the problem as far as removing the file from iDisk and
the cloud. However, when I go to the gallery, I still see the hyperlink for
LARGE on the size selection just under the video display. I tried to refresh
the site by going to the Mobile Me account and changing the settings (ie downloadable, or hide) but that did not work.
In fact the site gave me an error the first time I tried it. But then after that,
I was able to change the settings without any error. But that did not remove the
LARGE hyperlink either.
I also went to iMovie and re-published like you would to change the description.
That does not upload the movies because they are not changed. Interestingly the
LARGE size selector was enabled so I could change it (that was disabled on
previous attempts) But alas, event re-publishing did not change whatever
indexes are used to produce the video screens in the gallery.
I will take this up with Apple Mobile Me directly as soon as I can. If and when
I receive an answer, I will post it here.
Thanks again.

Similar Messages

Question regarding shared_pool sizes in Oracle 11gR2

Hi! I administer an Oracle 11gR2 database that runs on IBM hardware, OS AIX 6.1. The LPAR has 44 Gb of available memory and 8 dual-core processors assigned.
Normally, everything runs fine and we have no problems. Today the database started rejecting connections suddenly. The issue lasted for about 14 minutes and then cleared itself. When checking the alert log, it indicated an out of memory problem with the shared_pool, ORA-4031 error.
I am utilizing the automatic memory management feature of 11g, and memory_max_target is set to 14 Gb. I am going to increase memory_max_target to 18 Gb as part of my solution, but will that also then increase the size of the shared_pool in the SGA? Is it best to let the database manage the size of the shared_pool, or can (and should) I set it to a minimum size?
Any help, or links to documentation or MOS notes, is greatly appreciated. Thank you!
Mark

Before suggesting you change your memory managment in use I would want more information such as how long have your been running the system this way? How long had the system been running since its last startup?
If you have access to the AWR then what does the AWR report for the problem period show? Any unusual activity? Were any new features or major processing added to the application recently.
When you look at the memory management views how frequently does Oracle move granules from PGA to SGA, from the buffer cache to the shared pool and so on.
The following support note may help with trying to investigate what issues you face in relation to ORA-04031 providing the issue re-occurs.
Oracle document# 1088239.1 Master Note for Diagnosing ORA-4031
HTH -- Mark D Powell --

Question regarding the size of a rendered DVD file?

Hi all,
I just finished my first home video using Premiere Pro CS4 and Encore CS4. My source is a consumer HD camcorder. When I created the PP project, I selected AVHCD format to keep it the highest quality possible. So Iimported the files in PP, applyed some transition effects and a few title. Then I sent the sequence to Encore via Dynamic link. When creating the project in encore, I selected Blu ray. So I created a menu and all the navigation, added a subtitle and a background music. At first, I wanted to created a DVD of my video to give to family members, so I go to created disc, select DVD output and render the video. Now here comes my problem: the DVD folder created is 7GB, and my footage is only 1h45min. I always thought that a single layer 4.7GB could hold about 2h of video? My source being HD but me selecting DVD output, shouldn't it be converted to SD and fit a 4.7GB disc? What am I doing wrong?
Thanks for your help.
Bruno

When you transcode (convert from edit to DVD) you may select the bit rate you want
A higher bit rate results in a larger file (and better quality)
You said you select BluRay in Encore, then talk about DVD... you can't have both
With a lower bit rate (may show motion artifacts during movement) you may fit more on a DVD
What are your EXACT settings?

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

Question regarding DocumentDB RU consumption when inserting documents & write performance

Hi guys,
I do have some questions regarding the DocumentDB Public Preview capacity and performance quotas:
My use case is the following:
I need to store about 200.000.000 documents per day with a maximum of about 5000 inserts per second. Each document has a size of about 200 Byte.
According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/) i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using
a stored procedure. This would result in the need of at least 5 CUs just to handle the inserts.
Since one CU consists of 2000 RUs i would expect the RU usage to be about 4 RUs per single document insert or 100 RUs for a single SP execution with 50 documents.
When i look at the actual RU consumption i get values i don’t really understand:
Batch insert of 50 documents: about 770 RUs
Single insert: about 17 RUs
Example document:
{"id":"5ac00fa102634297ac7ae897207980ce","Type":0,"h":"13F40E809EF7E64A8B7A164E67657C1940464723","aid":4655,"pid":203506,"sf":202641580,"sfx":5662192,"t":"2014-10-22T02:10:34+02:00","qg":3}
The consistency level is set to “Session”.
I am using the SP from the example c# project for batch inserts and the following code snippet for single inserts:
await client.CreateDocumentAsync(documentCollection.DocumentsLink, record);
Is there any flaw in my assumption (ok…obviously) regarding the throughput calculation or could you give me some advice how to achieve the throughput stated in the documentation?
With the current performance i would need to buy at least 40 CUs which wouldn’t be an option at all.
I have another question regarding document retention:
Since i would need to store a lot of data per day i also would need to delete as much data per day as i insert:
The data is valid for at least 7 days (it actually should be 30 days, depending on my options with documentdb).
I guess there is nothing like a retention policy for documents (this document is valid for X day and will automatically be deleted after that period)?
Since i guess deleting data on a single document basis is no option at all i would like to create a document collection per day and delete the collection after a specified retention period.
Those historic collections would never change but would only receive queries. The only problem i see with creating collections per day is the missing throughput:
As i understand the throughput is split equally according to the number of available collections which would result in “missing” throughput on the actual hot collection (hot meaning, the only collection i would actually insert documents).
Is there any (better) way to handle this use case than buy enough CUs so that the actual hot collection would get the needed throughput?
Example:
1 CU -> 2000 RUs
7 collections -> 2000 / 7 = 286 RUs per collection (per CU)
Needed throughput for hot collection (values from documentation): 20.000
=> 70 CUs (20.000 / 286)
vs. 10 CUs when using one collection and batch inserts or 20 CUs when using one collection and single inserts.
I know that DocumentDB is currently in preview and that it is not possible to handle this use case as is because of the limit of 10 GB per collection at the moment. I am just trying to do a POC to switch to DocumentDB when it is publicly available.
Could you give me any advice if this kind of use case can be handled or should be handled with documentdb? I currently use Table Storage for this case (currently with a maximum of about 2500 inserts per second) but would like to switch to documentdb since i
had to optimize for writes per second with table storage and do have horrible query execution times with table storage because of full table scans.
Once again my desired setup:
200.000.000 inserts per day / Maximum of 5000 writes per second
Collection 1.2 -> Hot Collection: All writes (max 5000 p/s) will go to this collection. Will also be queried.
Collection 2.2 -> Historic data, will only be queried; no inserts
Collection 3.2 -> Historic data, will only be queried; no inserts
Collection 4.2 -> Historic data, will only be queried; no inserts
Collection 5.2 -> Historic data, will only be queried; no inserts
Collection 6.2 -> Historic data, will only be queried; no inserts
Collection 7.2 -> Historic data, will only be queried; no inserts
Collection 1.1 -> Old, so delete whole collection
As a matter of fact the perfect setup would be to have only one (huge) collection with an automatic document retention…but i guess this won’t be an option at all?
I hope you understand my problem and give me some advice if this is at all possible or will be possible in the future with documentdb.
Best regards and thanks for your help

Hi Aravind,
first of all thanks for your reply regarding my questions.
I sent you a mail a few days ago but since i did not receive a response i am not sure it got through.
My main question regarding the actual usage of RUs when inserting documents is still my main concern since i can not insert nearly
as many documents as expected per second and CU.
According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/)
i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using a stored procedure (20 batches per second containing 50 documents each).
As described in my post the actual usage is multiple (actually 6-7) times higher than expected…even when running the C# examples
provided at:
https://code.msdn.microsoft.com/windowsazure/Azure-DocumentDB-NET-Code-6b3da8af/view/SourceCode
I tried all ideas Steve posted (manual indexing & lazy indexing mode) but was not able to enhance RU consumption to a point
that 500 inserts per second where nearly possible.
Here again my findings regarding RU consumption for batch inserts:
Automatic indexing on: 777
RUs for 50 documents
Automatic indexing off &
mandatory path only: 655
RUs for 50 documents
Automatic indexing off & IndexingMode Lazy & mandatory path only: 645 RUs for
50 documents
Expected result: approximately 100
RUs (2000 RUs => 20x Batch insert of 50 => 100 RUs per batch)
Since DocumentDB is still Preview i understand that it is not yet capable to handle my use case regarding throughput, collection
size, amount of collections and possible CUs and i am fine with that.
If i am able to (at least nearly) reach the stated performance of 500 inserts per second per CU i am totally fine for now. If not
i have to move on and look for other options…which would also be “fine”. ;-)
Is there actually any working example code that actually manages to do 500 single inserts per second with one CUs 2000 RUs or is
this a totally theoretical value? Or is it just because of being Preview and the stated values are planned to work.
Regarding your feedback:
...another thing to consider
is if you can amortize the request rate over the average of 200 M requests/day = 2000 requests/second, then you'll need to provision 16 capacity units instead of 40 capacity units. You can do this by catching "RequestRateTooLargeExceptions" and retrying
after the server specified retry interval…
Sadly this is not possible for me because i have to query the data in near real time for my use case…so queuing is not
an option.
We don't support a way to distribute throughput differently across hot and cold
collections. We are evaluating a few solutions to enable this scenario, so please do propose as a feature at http://feedback.azure.com/forums/263030-documentdb as this helps us prioritize
feature work. Currently, the best way to achieve this is to create multiple collections for hot data, and shard across them, so that you get more proportionate throughput allocated to it.
I guess i could circumvent this by not clustering in “hot" and “cold" collections but “hot" and “cold"
databases with one or multiple collections (if 10GB will remain the limit per collection) each if there was a way to (automatically?) scale the CUs via an API. Otherwise i would have to manually scale down the DBs holding historic data. I
also added a feature requests as proposed by you.
Sorry for the long post but i am planning the future architecture for one of our core systems and want to be sure if i am on
the right track.
So if you would be able to answer just one question this would be:
How to achieve the stated throughput of 500 single inserts per second with one CUs 2000 RUs in reality? ;-)
Best regards and thanks again

Multiple stages on multiple screens of different size

I'm working on a project that requires me to have two stages on two screens of different size. How do I do this in Flex, or is it even possible?
More specifically, I am building a kiosk appliction, that will have the menu on a small touch-screen that sits in front of a larger, wall-mounted screen. When the user selects content to be played (videos, web sites, whatever) from the touch-screen, then the effect of that selection needs to be sent to the other stage. I need to be able to run a screen-saver on the main screen, also. Basically, the controls are the main application, and the other screen is simply a container for viewing things.
I am currently packaging my Flex project in AIR, not through the web, so I actually have a windowed application. Basically, I just need to create a new window with a custom chrome that simply holds a movie.
Is such a thing possible in Flex? I couldn't figure out how to spawn another stage, much less one that was referencable from the first stage.

Hey all. I have reached the answer. I left everything up that I posted before, in case anybody is having similar issues. To create the custom component, click your project, create a package, and then right-click that package and create a new MXML component. Then, create the MXML just like you would before. Your root tag will be whatever you are working to modify (so, s:Window for my case, but you can do an s:Label or whatever you want). So, first, I'll give you the code for my simple Window component:
[CODE]
<?xml version="1.0" encoding="utf-8"?>

<s:Window xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    systemChrome="none" visible="true" transparent="true" showStatusBar="false" width="400" height="300"
    <s:layout>
        <s:BasicLayout />
    </s:layout>
    <s:Label id="controlScreenTitle" text="new Window from VideoScreen component" fontSize="72" fontWeight="normal" color="#222222">
    <s:filters>
        <s:DropShadowFilter color="#CCCCCC" />
    </s:filters>
    </s:Label>
</s:Window>
[/CODE]
All I did was a very simple white box there. You can disable the system chrome and such from the main Window tag, as I have shown. The window this creates has no [ _ ] [ [] ] [ x ] buttons, bar along the bottom, or any background. In my actual project, this component will hold a container to play my video objects.
Then, I create my main document:
[CODE]
<?xml version="1.0" encoding="utf-8"?>

<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                        xmlns:s="library://ns.adobe.com/flex/spark"
                        xmlns:mx="library://ns.adobe.com/flex/mx"
                        showStatusBar="false" alwaysInFront="false"
                        creationComplete="init()">
    
    <fx:Style source="KioskScreensStyles.css" />
    <fx:Script source="controlScreenMain.as" />
    <fx:Script>
        <![CDATA[
            /* Insert other ActionScript stuff here. Try to put as much of it as you can in the .AS file, though */
        ]]>
    </fx:Script>
    <fx:Declarations>
        
        
        
    </fx:Declarations>
    <s:BorderContainer id="controlInterface" right="0" left="0" top="0" bottom="0" borderStyle="inset" borderColor="#CCCCCC">
        <s:layout>
            
            <s:BasicLayout />
            
            
        </s:layout>
        
        <s:Label id="controlScreenTitle" text="Error loading program..." fontSize="48" fontWeight="normal" color="#222222">
            <s:filters>
                <s:DropShadowFilter color="#CCCCCC" />
            </s:filters>
        </s:Label>
        
        <s:ToggleButton id="btn1" label="Play video 1" click="btn1_clickHandler(event)" />
        <s:ToggleButton id="btn2" label="Play video 2" click="btn2_clickHandler(event)" />
        <s:ToggleButton id="btn3" label="Play video 3" click="btn3_clickHandler(event)" />
        <s:ToggleButton id="btn4" label="Play video 4" click="btn4_clickHandler(event)" />
        <s:ToggleButton id="btn5" label="Play video 5" click="btn5_clickHandler(event)" />
        <s:ToggleButton id="btn6" label="Play video 6" click="btn6_clickHandler(event)" />
    </s:BorderContainer>
</s:WindowedApplication>
[/CODE]
Now, the important part will be the .as file. Here's parts of that:
[CODE]
/* Imports */
/* import custom components. This is what allows us to open a new window in AIR. NOTE: THIS IS HOW YOU GET THAT CUSTOM MXML FILE IN HERE TO USE */
import customComponents.VideoScreen;
// import older mx stuff only when needed. Try to avoid using these.
import mx.controls.Image;
// import the newer Spark components. Use these for everything possible.
import spark.components.VideoDisplay;
import spark.components.Window;
import spark.primitives.Rect;
// Global variable declairation
protected var screens:Array = Screen.screens;
protected var controlScreenSizes:Rectangle = screens[0].bounds;
protected var videoScreenSizes:Rectangle = screens[1].bounds;
// All variables below Defined in init(), to be sure that they have been fully loaded
// While the :Window declairation technically works for the controlScreen, Flash views this as an error, and will not process everything properly if I type it like that.
//protected var controlScreen:Window = this.Window;
protected var controlScreen;// = this;
/* NOTE: THIS IS THE USE OF MY NEW, IMPORTED CUSTOM WINDOW. This is all you need to do to make it. */
protected var videoScreen:VideoScreen = new VideoScreen();
protected var btns:Array;
/* Initialize all my variables, and call the needed functions to set everything up */
protected function init():void
    controlScreen = this;
    // This is a Window method that opens the Window. I did not have to code this.
    videoScreen.open(false);
    btns = [btn1, btn2, btn3, btn4, btn5, btn6];
    placeScreens();
    createControlScreen();
    loadScreenSaver();
/* Moves all my screens so that they sit in the top-left of each of the two screens, and then expands to be full screen on those two screens, whatever size that may be. */
private function placeScreens():void
    // We move it to -1,-1 because there is 1 px padding and dead white space that I can't figure out how to remove.
    controlScreen.move(-1,-1);
    controlScreen.width = (controlScreenSizes.width+1);
    controlScreen.height = (controlScreenSizes.height+1);
    controlInterface.width = (controlScreenSizes.width+1);
    controlInterface.height = (controlScreenSizes.height+1);
    videoScreen.systemChrome = "Standard";
    videoScreen.move(controlScreenSizes.width,0);
    videoScreen.width = (videoScreenSizes.width);
    videoScreen.height = (videoScreenSizes.height);
/* Puts all the buttons where they belong, and attached the background image that we need and so forth */
private function createControlScreen():void
   /* Most of this code is not needed for the demonstration, so I only include what I feel would be helpful, with psudocode for the rest */
    var backgroundImg:Image = new Image();
    backgroundImg.source = "assets/backgroundImg.jpg";
    var backgroundVid:VideoDisplay = new VideoDisplay();
    backgroundVid.source = "assets/backgroundVid.mp4";
    backgroundVid.width = (controlScreenSizes.width+1);
    backgroundVid.height = (controlScreenSizes.height+1);
    backgroundVid.autoPlay = true;
    backgroundVid.muted = true;
    backgroundVid.loop = true;
    /* Format the buttons. You can change height, width, x and y position on the form, label (the text on it), and some other things (including the ability to spawn video or picture or sound when clicked and such for animations. */
    /* buncha code that moved the buttons around and made them all fit in the screen dynamically based on the screen size. */
    /* Finally, play with controlScreenTitle, which is a label control that you can styple and use for text on the screen in addition to the buttons. In here is just a bunch of code to do that*/
    /* Attach the elements to the controlInterface. The first put on has the lowest z, therefore is under the rest. Stack them in the order you want then displayed. The first one should be either backgroundImg (image), or backgroundVid (video), depending on what you provided and want. Note that the video causes the buttons to lag a lot */
    controlInterface.contentGroup.addElement(backgroundImg);
    //controlInterface.contentGroup.addElement(backgroundVid);
    controlInterface.contentGroup.addElement(controlScreenTitle);
    controlInterface.contentGroup.addElement(btn1);
    controlInterface.contentGroup.addElement(btn2);
    controlInterface.contentGroup.addElement(btn3);
    controlInterface.contentGroup.addElement(btn4);
    controlInterface.contentGroup.addElement(btn5);
    controlInterface.contentGroup.addElement(btn6);
    /* Buncha code for the functionality */
} // End function createControlScreen()
/* Puts the screensaver up on the video display so that we don't burn out the display */
private function loadScreenSaver():void
    //pull in screensave into that window
/* Makes sure that the user doesn't see two buttons active at the same time--that would look like two movies were playing at the same time. */
private function deselectOtherButtons(clicked:int):void
    for(var i:int=0; i<6; i++)
        if(i != (clicked-1))
            btns[i].selected = false;
/* All of the below do the same thing: unselect all the other buttons when one of the buttons is clicked. I could just create one click event handler, but I wanted to leave the possiblity of customizing the result of each button's click, so I left it this way. */
protected function btn1_clickHandler(event:MouseEvent):void
    deselectOtherButtons(1);
protected function btn2_clickHandler(event:MouseEvent):void
    deselectOtherButtons(2);
protected function btn3_clickHandler(event:MouseEvent):void
    deselectOtherButtons(3);
    deselectOtherButtons(4);
protected function btn5_clickHandler(event:MouseEvent):void
    deselectOtherButtons(5);
protected function btn6_clickHandler(event:MouseEvent):void
    deselectOtherButtons(6);
[/CODE]
If anybody looking at this has any questions about it, feel free to ask me. I am not usually able to comb the forums, so you'll have to PM me or something. I actually put this up right after I found my solution, so there is work still to be done on it (obviously). But if you ever need to do anything like this, here's some code for you.

Bw Question :regarding the versioning

Hii All,
I did post a question regarding to the versionining of the cube on friday 9th May and still i did not get any reply on that.Plz let me know.otherwise plz keep me posted that you are unable to reply to my question.
My Question was :
In the Versioning of the cube ,we give that version a particular name and select the value type of it as : 110 or 130 or 140. what is this value type .. ? what does this 110,130 or 140 really mean ?
Why we need this value type.? and can we get some documents to read and explore this value type ?. Plz help.
Thanks & regards ,
Madhavi S Bichakal

Hi Madhavi,
Basically in BW you'll find two characteristics used for versioning:
- Version: Used to create different versions of the information
- Value type: used to indicate what the information means.
Examples:
Version 000 is usually Plan/Actual data (the final version). Then, for version 000 you will have different value types, like 010 = Actual, 020 = Plan, 030 = Target, etc..
Then you can have different versions (001, 002, 003) that are used in the planning process. You start with version 001, then you can move to 002, 003,... and when you have the final Plan, you move to 000.
That's the usual usage of version / value type.
but, you can use it as you want. The only problem that you can have is that if you rename the description of a value type, and then you activate a BCT that generates data for that value type and the description will be incorrect.
From what you said, you are using values from 100 and above, SAP uses up to 90 from what i've seen, so you won't have any problems.
Hope this clarifies.
Regards,
Diego

Where do I find info on how to print on different size projects?

I'm not sure if I'm posting this on the correct board or not. My question is where do I find instructions on how to print on different size papers such as, envelopes and postcards both addresses and return addresses. I know how to print the body of my postcards since I use Windows Publisher but I'd rather not have to use labels. It would be so much faster and more professional to print the addresses and return addresses directly on the postcards and envelopes. I've owned many HP printers and have always been able to do that but can't seem to set my Deskjet 8500 910A.
Thanks for any help available.

linadads,
I am happy to help you with your issue regarding printing on envelops. The printer software doesn't carry the functionality to create envelope documents. You will use a word processor for completing this such as, Microsoft word. In Microsoft Word (or a like word processor) it will give you the option to create an envelope with the send from and send to address sections.
I hope this helps
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

In Pages 5, why are page thumbnails different sizes?

So I'm using 5. And I must say I think it's brilliantly done after a long period of ******** about it. I guess I'm not asking of it anything it doesn't provide and what it does it does very well - though I'm puzzled by the behavior of selecting text via the keyboard.
Anyhow, that's not my question. I'm working with a long text document. I notice that as I work the page thumbnails become different sizes. It's subtle but it's clearly intentional. I reckon it's trying to tell me something but I don't know what. Haven't been able to find any info in the manual and was wondering if any of you clever people here might know. Thanks.

This is what I meant about how rude you are though. Your answer DOESN'T EXPLAIN ANY OF THE BEHAVIOUR myself or the other person were reporting. The only assumption that I can make is that you posted here for the sole purpose of implying that we are both mistaken or stupid.
How is this helpful at all?
How do you have 32,485 points when you are obviously more concerned with insulting people than helping them out? It puts the lie to the whole idea of "Apple Support Communities."
Also, I specifically informed you that your comments were insulting and unhelpful and politely requested you not post on this thread anymore or at least until you had some kind of actual information, yet here you are. Posting again, with no content other than the implied insult.
I'm not stupid. I know what a section break is, I know what a page break is. I'm a writer who has used innumerable word processing programs over the years and have been an IT worker for 10 years now.
I have a Pages document. It has no (or only one depending on your point of view), section(s). It has page breaks only. The pagination is set to start at "1" on the first page and proceed normally to the end of the document (300 or so pages). I am using Pages 5.5.2 on a brand new iMac. I have NONE of the previous or older versions/types of Pages on my computer.
The pages thumbnails on the side, do actually CHANGE SIZE randomly as I am editing the document. These differing sizes are NOT CORRELATED WITH THE BEGINNING OR ENDING OF SECTIONS. These size changes are also NOT CORRELATED WITH THE PAGE BREAKS (in case you were about to argue the similarity of page breaks and section breaks). As I work through the document and scroll up and down editing here or there, the size of the thumbnails RANDOMLY CHANGE SIZE. Sometimes this is correlated with me working on a section, sometimes I can work on a section and no change happens at all. The thumbnails that change size often change back again when I scroll back to them later on.
So please ... Try to act like a decent human being and either help out, or go away. STOP POSTING THAT WE ARE WRONG, when you DON'T in fact know we are wrong. STOP INSULTING ME by assuming I am stupid.
Why are you even here if you don't want to actually HELP anyone?
To anyone else reading this: I am having a real bad time with this fellow who is just the most insulting person I have met for a while, however many of my posts about him are being deleted. If anyone knows (including the mods of this forum) of the proper way to REPORT or get rid of a troll/abuser like him on Apple Support Communities or a place to report his behaviour, please let me know.

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

How can I change the font size on the post of WordPress?

I have found three websites which address WordPress style sheets:
Playing With Fonts: http://codex.wordpress.org/Playing_With_…
Font Size and Color: http://en.support.wordpress.com/editors/…
How to Change Font Size In Wordpress: http://www.ehow.com/how_5469172_change-f…
Here are the instructions from the third website above:
Things You'll Need:
Site designed in Wordpress
Administrator access
Step 1
First, to change the font size on a Wordpress site you need to log into the site as administrator. If you do not know how to reach the login page, simply add "/wp-login.php" after the "www.url.com" address. Then login using the admin sign in.
Step 2
Next, get to the Wordpress file editor by going to Appearance->Editor.
Step 3
Once in Editor, identify the Stylesheet file (style.css) and click to edit. This is usually located on the right hand side under the "Styles" heading.
Step 4
Once in the style.css file, you want to conduct a search for "fontsize". This parameter is used throughout the style.css file and is the parameter used to control font size. Next to "fontsize" you will see something like "16px". Simply increase or decrease the "16" to change font size. The tricky part is to figure out which "fontsize" you want to edit.
The way to do this is to first look at the heading it is under. If it is under "comment-template", it is obviously related to either the font size of the comments themselves or perhaps the comment form or the date/time stamp of the comment.
It may take a little trial and error to find the right "fontsize" to modify. Simply modify the one you think is correct and in a separate window, reload the page with the font you are looking to modify. If it did not change, undo the previous edit and try a different "fontsize".
I went to the Dashboard and clicked on the “Appearance” icon on the left-hand side, and then clicked on editor. I clicked on Stylesheet (style.css), but I have not been able to find the “fontsize” that would change my post font size. As the author writes: "The tricky part is to figure out which "fontsize" you want to edit." Some of the font sizes are given as a percentage, and I don’t know if these come into question, i.e., if I should try changing one of these to see what happens.
The end result is that I still have not been able to change my post font size, other than by using the Heading-1-through-6 option, which, I understand, is not the best way to do it.

From John Waller: “If you're using IE8, hit F12 to launch Developer Tools which give you a point and click method of locating the relevant CSS rule on screen.”
I have Internet Explorer 8 (IE8) so tried this method.
This sounded like another promising possibility; however, I have not been able to change the font size in my post using this method.
I have gone to Dashboard > Posts > Edit > then moused-over my post > clicked on "edit" and then hit F12. An enormous amount (20 pages or more) of CSS appears. I tried picking out the font size that I thought pertains to the post (under Text Area), and I have changed the font size from 13px to 24px; however, I have not been able to “save” the new setting. When I go back to it, it is back to 13px.
As a result, I have not been able to use a trial-and-error method to establish which font size I must change in order to change the font size of my post.

Question regarding ASO application in Essbase 11 version

Hi All,
Thanks for the replies to my previous posts.
I have a question regarding the ASO applications for telecom company built in Essbase 11 version. Please provide your feedback on the design.
The ASO application has the following number of Dimensions:
Dimensions     Number of Levels     Number of Level 0 Members     Number of Attribute Dimensions
Dimension1     2     6.5 million     15
Dimension2 1     3
Dimension3     1     4
Dimension4 1      6
Dimension5 1     6
Dimension6     1     5
Dimension7 1     3
Dimension8     5     1700
Dimension9     2     800
Dimension10 2     40000
Dimension11 3     750
Dimension12 2     34000
Dimension13 1      15
The number of Measures is 8.
The outline size is around 2.12 GB.
The data is mostly sparse. Does this design yield a good performance. Should I change some of the attributes to UDAs to increase the performance.I think Attribute dimensions are more flexible than UDAs but it affects the performance of the retrieval.
Thanks in advance.
Kannan.

In ASO attribute dimensions are treated like regular dimensions, That is to say they are materalized just like a regular dimension. Changing them to UDA's won't buy you the same performance as having them as dimensions will. The one nice thing about Attributes in ASO cubes (and BSO cubes) is you don't clutter us the screen with dimensions that are not used a lot. If your attrubite dimensions are used often in your ASO cube, there would be no performance difference if you made them regular dimensions.

Print Different Sizes Images

I use CS5 / 64bit and print on a Epson 3880 printer. I sell my images at art shows & hops. I shoot all image in RAW, on a Nikon D80. I process all images first in CR. When in CR I do not use the Crop Tool but do use most the other available tools. I am able to process 80% of images corrections, in CR and the balance in Photoshop CR5. I sharpen all image with PhotoKit 1.2. I save all my processed images, in a Master Image (MI) file that can be accessed through Bridge or Photoshop. The smallest image I sell is a 5x7 and the larges is 17x22. How do I print different size picture image from the MI and keep resolution between 200 - 300 ppi, one per page to meet the demands for my customers.
Thanks,
jacklinn

Hi,
This forum is related to queries on the 'Adobe Community Help' application. For Photoshop queries, post your query on the Photoshop forum.
Regards,
Sandeep

Thanks for the reply to my question regarding sound in iMovie and sending me the online links. however the online links are impossible to play as they upload too slowly with the result that the playing keeps stopping waiting for the content to catch up

Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lolly

Please continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this.

Question Regarding Mesh with 3702 and non AC ap´s

Hello!
quick question regarding MESH deployments with 2 different sorts of AP´s: AC and non-AC modells: If my 3702i is my root AP´s, and 3602i my MAP - will AC still work in 80Mhz, or will I have to switch to 40mhz (and thus crippling (???) AC performance?)
Not 100% sure on this... I *think* it should still work for the normal 802.11n connection, but I´m not sure if the 80mhz channel width (needed??) for AC, will cause the non-ac 3602i to be stranded?
Thanks alot for your insight!

Currently, my network DHCP server is a software based DHCP server. In reading over your post if I understood correctly it sounds like the managed switch would have its own hardware based DHCP server to assign IP addresses to those clients identified on the "external" VLAN. Did I understand that correctly or did misread something?
DHCP server will be software based, even though you defined it on your switch, it is DHCP service running on its OS.
I am configuring this setup for a small business application and will need to purchase a managed switch with 16 or 24 ports. Do you have any recommendations on a particular managed switch that will handle the VLAN configuration and include POE while keeping costs in mind.
In this forum, most of us discussed about Cisco enterprise grade wireless. Here is 2960X series switch detail, if you are interested
http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/index.html
You may need to check the pricing with your Cisco account manager or from a Cisco partner.
HTH
Rasika
**** Pls rate all useful responses ****

Question regarding different sizes of movies posted to Mobile Me

Similar Messages

Maybe you are looking for