Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

Vendor extended to different purchase organisations

dear all mm gurus,
pl update thru which t-code, one can see vendor extended to different purchase organisations.
pl help
regards
srihari

Hi Shri Hari,
You can try this in tcode MKVZ.
Mention the vendor number you want to check in the first tab.
Leave the purchasing organisation field and other tabs blank and execute.Then you will get the details for which purchasing organisations your vendor has been created.
Thanks,
Sampath

How to create vendors in the Purchasing organisation via mass change?

Hi,
I have a list of vendors which are created in a company code.
Now I need to create them in a purchasing organisation.
I think I can do that via a CATT with transaction XK01.
The required fields are "order currency" and terms of payment.
Is that a correct way?
Thank you.
Kind regards,
Linda

Hai, If u want to upload master records from legacy (non sap) to sap we have sum processors like (Lsmw ,Bdc .Ecatt and Scatt)
Normally Ecatt and scatt used for testing purpose not uploading but it has uploading functionality also.
Bdc is used Abaper's.
Most of the functional consultants uses lsmw
If it is use ful to u plz assign the points

Question regarding creation of xml-elements with numerical values

When i create xml-documents from xml stored in the database (xmltype table based on an xml-schema), i find that numerical values which were stored as 0.395 (with the "." as the decimal separator) are retrieved as .395.
Is it possible to apply a format mask so that the numerical value is retrieved as 0.395?
thanks, Bart
N.b. Note that i select a complete xml-fragment. So my problem seems related to the storage or retreival of 'schredded' XML. I do not use SQL/XML-functions with relational data, in which case i know how to apply a format mask.

I don't use XSLT, i just query the XML-documents stored in an XMLType column with a simple SQL-statement.
I have posted a simple example over here Re: Is it possible to influence the creation of empty elements?

A few more questions regarding creation of recovery discs

HP Pavilon 17 Notebook 17-e040us
Wireless connection
In the creating covery discs information that I downloaded from HP's website, it states"if you are prompted for an Administrator password, type the password or providide confirmation.
How do I create an adminstrator password? The only areas where I have created passwords on the laptop are the Login Screen/Signing In to PC, Mirosoft Account and Computers Description. How do I provide confirmation?
Disconnecting from the internet. After the login screen and go to the start menu I'm not connected to the internet. Correct?
Do I have to disconnect exterior equipment from the laptop before creating recovery discs?
During the creating process, if it should stop or ,get a message something is wrong, what do I do?
Thank you.
This question was solved.
View Solution.

You aren't likely to be asked for Admin password unless you are using a User account created with Limited permissions-such as one would set up for another user on their machine.Some people share a machine with kids,teens and setup a Limited account for them.
I have never really worried about disconnecting from Internet -just don't have Internet Explorer or Email app open and active on internet.You could always turn off the Wireless I guess. Usually the F12 key in top row turns wieless off/on by tapping. White light=On.
If you run into a problem...just post that problem if the Recovery Manager doesn't give details of what you need to do to correct it. You can always phone HP and request Recovery Media if the process fails for you.
Just try to stop worrying and over-thinking it.Go for it!
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Vendor blocked for Purchasing Organisation

Experts,
SRM 7.0/ECC 6 (Ext classic)
User created SC and local PO was created but this PO was not transferred to ECC.
When I tried to retransfer this via SE37, RZ20 error shows "Vendor 1000 blocked for Purch Org XXX". Now the shocking finding is that this vendor i.e. 1000 is nowhere used in my PO.!! Vendor in my PO is 2000. Why is system linking a different vendor with this PO....as a result ECC PO is not getting created.
Any SAP notes for this...looks like an SAP bug.
Thanks

Hi Sachin,
I checked the same. Under 'Partner data' tab for vendor 2000, vendor 2000 is only maintained and same is the case for vendor 1000 as well.
Also vendor 1000 is blocked for Purch org, but why is system picking 1000 instead of 2000 for a PO which is using vendor 2000?
Anyway I can debug this??
Thanks

Question Regarding Mesh with 3702 and non AC ap´s

Hello!
quick question regarding MESH deployments with 2 different sorts of AP´s: AC and non-AC modells: If my 3702i is my root AP´s, and 3602i my MAP - will AC still work in 80Mhz, or will I have to switch to 40mhz (and thus crippling (???) AC performance?)
Not 100% sure on this... I *think* it should still work for the normal 802.11n connection, but I´m not sure if the 80mhz channel width (needed??) for AC, will cause the non-ac 3602i to be stranded?
Thanks alot for your insight!

Currently, my network DHCP server is a software based DHCP server. In reading over your post if I understood correctly it sounds like the managed switch would have its own hardware based DHCP server to assign IP addresses to those clients identified on the "external" VLAN. Did I understand that correctly or did misread something?
DHCP server will be software based, even though you defined it on your switch, it is DHCP service running on its OS.
I am configuring this setup for a small business application and will need to purchase a managed switch with 16 or 24 ports. Do you have any recommendations on a particular managed switch that will handle the VLAN configuration and include POE while keeping costs in mind.
In this forum, most of us discussed about Cisco enterprise grade wireless. Here is 2960X series switch detail, if you are interested
http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/index.html
You may need to check the pricing with your Cisco account manager or from a Cisco partner.
HTH
Rasika
**** Pls rate all useful responses ****

Can the same Purchase Group be assigned to two different Purchase Org?

Hello Gurus,
I have a doubt regarding the assignment of a purchase group to two different purchase Organisation?
If yes , How?
Thanks in advance,
Regards,
Pratap Lingala

Hello,
In SRM standard, a purchasing group can be assigned to only one puchasing organization: this is done using 'Function' tab of Organizational Unit, as you did it to define an OU as a company and to define an OU as a purchasing organization.
Regards.
Laurent Burtaire.

Few questions regarding nokia N900

Hi,
I have a few questions regarding n900:
1- is there different versions of this phone for different regions? for example asia, middle east, europe.. etc. and if there is can i order a different version from nokiausa website?
2- is the warranty international? even if i get the additional 1 year warranty?
thank you
Solved!
Go to Solution.

Hi,can you help shatter some light for me?
I would like to know if NOKIA planing to release the N900 anytime soon to ASIA and ASIA - Pacific region? I can't find any information regarding N900 on any Asia Pacific region sites. China, Hong Kong, malaysia, Singapore, Phillipines, India, Thailand, Australia. Nothing is found. There are only about 8 Selected regions right now. But Would I would love to know if there by any chance it will be release else where before this Christmas Season.
I live in New Zealand, but I know that this phone will never going to be in NZ until sometimes next year or maybe never. I would love to buy this phone by any mean. So I'm planing to get it from Asia during my visit there next month.
Please help clearing this for me.
2B || !2B N900 1S TH3 F0N3 4 M3
Please Kudos! me. To show your Appreciation

Purchasing organisation extn

Hi,
I have created one vendor one purchasing organisation.I want to exten that vendor another one purchasing organisation.
How to exten the purchasing organisation??
Regards,
T.Murugu

Hi Muruga,
Go to the tcode XK01 and enter the vendor and this new purchasing organisation and maintain the data for this pur org.
Hope it wud have answered ur question
Reward if useful
Aasif

Creation of vendor organization at all purchasing organization level

Dear Experts,
Our client is looking for a functionality to create a vendor which links the vendor to all the purchasing organizations (without manual extension) . In the org setp, the client has multiple company codes and purchasing organizations. What I understand is that ERP MM allows us to create a vendor only at purchasing organization (MK01) or company code level (XK 01).
Could you please advise how to create a vendor which is automatically applicable to all the purchasing organizations?
Here, the client is using the supplier registration functonality to register the vendors which on approval will get replicated to to the ERP MM system.
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hello,
You may define Purchase Organization as the reference Purchase Organization and assign all the purch. organizations to reference purch. organization. Then define Purchase view for the Vendors in Reference Purchase Organization using MK01.
Thanks,
Venu

Vendor marked as purchasing Block after confirmation of Vendor through FK08

Hi ,
We are having SRM 5.0 Add On System. While Creation of Vendor In ECC system it goes for Confirmation First.
So in SRM Vendor Remains as Blocked for Purchasing in Table BBPM_BUT_FRG0061 as Vendor in ECC system also remains as blocked for Purchasing.
Confirmation FK08 is done by different user. After Confirmation in ECC system vendor get unblocked for Purchasing but in SRM it remains as blocked for purchasing.
So Purchasimg Blocked is not removed in SRM.
If we are removing the block tick by Changing the Vendor(XK02) then in SRM Vendor get unblocked automatically.
Expecting reply at the earliest.
Thanks & Best Regards,
GK

Hello GK,
Behavior you describe is the standard one.
FK08 is to confirm vendor modification regarding accounting data, that is at company level.
So, purchasing organization data being not concidered, vendor is unblocked for posting (all companies or selected company) but not for purchasing.
Regards.
Laurent.

Purchase organisation Field in Vendor master data

Hi All
During the creation of Vendor master ,Needs to make the Field Purchase organisation as a mandatory. I have checked the in the following configs.
Define Account Groups with Screen Layout (Vendors
Define Screen Layout per Company Code (Vendors)
Define Account Group and Field Selection (Vendor)
The option is not available. for the above requirement.
thanks & Regards
DP

In many companies the address data is maintained by different people than accounting data and purchasing org data.
I would not like that accountants to create my purchasing org data, and I am certain that my accountants dont want the buyer to create his accounting data.
if you could make this combination mandatory, then the user would have to maintain all screens at the same time, which may result in delays. as he can only start once he has all data available. SAP standard allows to create a vendor with general data and purchasing org data and purchasing can start buying. the company code data is only needed in the moment the goods arrive.
So you gain time to collect the data while you already started business.
Further, not all vendor master need to have purchasing org data. and not all vendors with purchasing org views need a company code view.
e.g. a restraunt may send you bills for lunch, but you do not place purchase orders with this restaurant. No purchasing org view needed here.
a goods supplier, that is needed for Intrastat purposes only, does not need a company code view, as you will never get invoices from the goods supplier.

Creation of Vendor Aging Report in SAP BI.

Hello,
There is requirement to create the Vendor Aging report in SAP BI Cube.
In order to show the Aging of the Vendor in different buckets.
Can anyone help me out with the Links/Blogs/Wiki ... URL's .
I tried finding in net couldnt get anything related to this.
Thank you for the help in advance.
Regards,
Adhvi

Hello Obaid,
Thanks for the reply.
got the URL for Vendor Aging Report ..which has better detailed information.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/b4e9503d6a4f39b66e67b1cedf41af/frameset.htm
0FIAP_M30_Q0003 not found in the BI Content
Creation of Vendor Aging Report in SAP BI.
Vendor Ageing formula
If you come across any further Customization of the Reports related to the Vendor ageing reports based on the URL mentioned below...let me know.
Thanks & Regards,
Adhvi

Problem for creation of PO for different company code

I have problem for creation of PO using ME21 for different company code.Order is not created.
Please give reply it is urgent.

Hi Mansih,
I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
Have a nice day!

Questions regarding creation of vendor in different purchase organisation

Similar Messages

Maybe you are looking for