Questions about patching a global zone with a zone defined via luugrape

I've discovered that under Solaris 10 u7, luupgrade -t doesn't like seeing any zones defined when applying patches. If it sees a zone or zones defined it errors out.
Well, I found a way to make it work. Basically you shutdown and detach the zones (or zones). I then delete the zone configuration. At this point, you would think luupgrade would stop complaining and just work. It doesn't. It will still fail at this point. The only way I could get it to work is in the global zone I had to do the following:
mv /etc/zones /etc/zones-ORIG
mv /zones /zones-ORIG <<< probably not needed but whatever ...
lucreate -n S10u7zfsPATCHED -p rpool <<< So at this point both my active BE and the ABE both have effectively no zone configurationRan luupgrade and, poof, it works:
luupgrade -t -n S10u7zfsPATCHED -O -t -s . ./patch_order
Validating the contents of the media <.>.
The media contains 138 software patches that can be added.
Mounting the BE .
zoneadm: global: could not get state: No such zone configured
zoneadm: failed to get zone data
Adding patches to the BE .
Transition old-style patching.
Checking installed patches...
Patch 120900-04 has already been applied.
See patchadd(1M) for instructions.
WARNING: Skipping patch 120900-04Still I'm wondering why did I have to get so extreme to make this work ... after detaching and deleting the zone configuration why would luupgrade still complain about a zone which effectively no longer existed. I looked in /etc/zones and could find nothing related to my original zone. Where is luupgrade getting this almost "ghost" zone configuration information ?

Similar Messages

Hi Everyone Im New, Got Question About Upgrading MSI GT60 0ND With SSD

Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David

Quote from: dudiz10 on 10-January-13, 19:20:54
Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David
I think serial key of windows is in your bios which you cannot See however it should be automatically activates windows

Questions about VK34 (create condition record with reference)

Hi experts,
When clicking the botton "copy condition" via VK34, an error message pops up. It says the error is due to no definition of select rule. I use the standard condition record PR00.
Q1: How to define "select rule"?
Q2: Any chances to download condition record when using VK13 or VK33?

Hello Colleague.
This Unicode problem occurs mainly with pricing reports (recognized by report names that start with /1SDBF12L/RV14AK).
To regenerate these, call transaction V/LE or use transaction SE38 to execute the report RV14ALLE.
Leave the selection screen empty and execute (F8).
See SAP note 497850.
If you have further questions about the generation in the condition maintenance, I recommend to read Note 886771.
I hope it can help you.
Regards
Ruy Castro

Question about upgrading iTunes multiple computers with shared library

Greetings,
I have a question about upgrading to the current version of iTunes.
Currently, my household uses 3 Mac computers (2 Powerbook 17in laptops and a Mack Mini). We are all (currently) on system 10.4.11 (with iTunes 9.2.1). Between the 3 computers we have a shared iTunes music and video library on a networked high capacity hard drive.
We recently purchased an iPad. In order to make it easy for updates and to use media from our iTunes shared library I decided that we should upgrade the systems on our home computers to Snow Leopard. I have ensured that all the computers have at lease 2 Gb of RAM and adequate hard drive space.
The only possible problem I see is that one of the Powerbook laptops uses the old Motorola processor. (This is one of the last Powerbooks to use that processor.) I don’t think this computer can be upgraded to Snow Leopard.
My question is, if I upgrade 2 of the computers (and iTunes in the process), will I still be able to access the shared iTunes library using the older computer with the older system and iTunes? Will the upgrade process change the iTunes library in such a way that the one older computer will no longer be able to properly access that library?
Are there any other problems I might encounter having a mixed system/iTunes environment?
Thank you,
Tim

iantoole wrote:
Just a thought. Should I somehow open iTunes on MBP2 using MBP1's Library file??
both Macs can access the same library file, however, only one at a time !
to do that, you would ideally have the entire iTunes folder (not just the iTunes music folder) on the external. then, on one Mac after the other, launch iTunes while holding the option key, click on +choose library+ when prompted, and select the iTunes folder on the external.
or, you could have two separate libraries and keep those in sync using third party tools such as Syncopation, TuneRanger or SuperSync.
for purchases from the iTunes store, you could set up _*Home Sharing*_ - it can be configured to automatically transfer new purchases to home shared libraries.
Can I create a script to have MBP1 always save the iTunes Library file on the shared hard drive?
no need.
JGG

Question about managing application licenses together with netboot

Hello
So far I had made no experience with an MacOSX Server netboot configuration but we plan to introduce it in some weeks. Therefore we are "wondering" how management/assignment of application licenses is working in a netboot configuration. Normally in a local MacOSX configuration licenses for application are in generally assigned on the application (some are bound to a certain user name, others to the CPU ID) and is valid for all users login to the same computer. How and at which time are application licenses (for example MS Office 2004, Adobe Acrobat etc.) assigned in a netboot environment?
Many thanks in advance for any clarification and with best regards, André Müller

Hi Andre,
Is this a technical or legal question Either way it is an interesting question about a major grey-area, and I wonder if anyone has the right answer.
Boiling your question down to specifics, it could be...
I have 15 individual Photoshop serials. I want to run Photoshop off a NetBoot image for 15 simultaneous users. Can I install one serial on the image, and allow 15 users to open Photoshop simultaneously. What if I want to install the image on 20 machines, but only 15 users will ever use Photoshop simultaneously.
There is a technical answer and a legal answer to the question. I don't know if there is a 'right' answer since multi-user installations of titles that are technically possible under NetBoot may not be allowed legally under the user license agreement you committed to on breaking the seal on the software. And these agreements are different for different countries.
Here's the technial answer. Sometime before OSX server 10.0, when Apple introduced netboot technology, developers were advised not to perform network scans checking for duplicate serial numbers when aps start up.
In practice this means you can install software title on your image, activate with a serial number, and it will not conflict with the other identical versions of the same application on other images on the network.
FileMaker Pro is the only software I am aware of that doesn't play by these rules, altthough it no longer checks when the applicaton starts, but when any FMPro network activity is started.
Here's the leagl answer. It depends on the title and the country you are in. The legality is definded under the eulas for the titles concerned. I don't know if the leaglity has ever been tested in a court of law in any country in this context.
The easy way to do the right thing for some titles it to purchase a multi-user serial number, ie. a single number which will work for 5 or 10, 20, 50... etc. users. Fore example, FileMaker has a volume licensing serial number which I beleieve can be purchased in increments of 10 users. However, not all titles offer this option, though, and it's difficult if you need 12 copies and have to buy 20.
Sassafras software http://www.sassafras.com/ sells Keyserver, which may be an appropriate solution. Keyserver tracks installations and authenticates serial numbers to ensure no more than the licensed number of copies can be run at the same time.
I don't think I've answerede your question for you but hope to have expanded the contxt of the question for other suggestions.
Good luck,
b.

Question about setting up a workstation with Aperture 2

hello, I hope I will get some help from here.
I guess first I should list the things I have, this will make it easier. I have a Macbook Pro with 10.5.6, a Samsung 24" monitor, Aperture 2, Photoshop CS4, CANON Pro9000 Printer, and Pantone Huey Screen calibrator.
So I already have both my screen (macbook Pro's and Samsung's) calibrated. My question is about how to correctly set up my printer.
I went on Canon's website and try to download the driver for the CANON printer, But I see there is 3 different version for the driver, i am not sure which one to choose. One is for 10.3.9 and above, one is for OSX CUP (which i donno what it means).
and do I need to install any of the canon software or plug-ins? I thought the printer color profile is in the driver as well. and aperture should pick that up fine. but for max quality printing, am i better off with the canon software? if so which one should i USE? Easy Photo Printing EX or Easy Photo Printing PRO?
last... I guess it will be nice if someone can point me the right steps to make a print after I have done everything I want to in Aperture. if you guys can give me a step by step guides for printing from Aperture 2 to Canon Pro9000 with Canon Photo Paper Pro II. and is photoshop is must have in the printing process? I really would love to stick with Aperture as much as possible. but again, quality go first...
Thank you for reading my post, and thank you even more for replying.

Challenging, yes, here is a link to a podcast on the O'Reilly website, hope this helps, I found it very useful. I actually subscribe to the podcast (via itunes) and find that there are some great topics.
http://digitalmedia.oreilly.com/pub/a/oreilly/digitalmedia/2007/02/13/insideaperturepodcast-9.html?page=last&x-maxdepth=0
Joe Schorr on Color Management in Aperture
Inside Aperture Podcast 9
by Derrick Story
02/13/2007
Joe Schorr, Apple Senior Product Manager for Aperture, covers color management in Aperture 1.5.2. He discusses the three basic areas that photographers must address in order to have consistent color throughout the workflow: Screen calibration, correct settings in the print dialog box, and adding profiles to exported images. There are some nice tips in this chat, including how to use on-screen proofing in Aperture. Derrick Story interviews Joe in this exclusive O'Reilly Media podcast. (Inside Aperture, Feb. 13, 2007: 18 minutes, 18 seconds).

Question about Oracle Database 11g: Program with PL/SQL

Hello,
I've read that:
This course is a combination of Oracle Database 11g: PL/SQL Fundamentals and Oracle Database 11g: Develop PL/SQL Program Units courses.
In order to preparing for this exam, i should read the student guide, so there are 4 pdf files. One is Oracle Database 11g: PL/SQL Fundamentals, and the other 3 are regarding to Oracle Database 11g: Develop PL/SQL Program Units (volume I, II and III). My question is, regarding to this last one (Oracle Database 11g: Develop PL/SQL Program Units), which volume should i read? I saw that volume I has 400+ pages, and the IIIrd ~80.
Which document should i read? What's the difference between them?
Thanks!

Passing the exam and becoming certified are not a matter of simply reading a book or taking a training class. While books and classroom materials as well as in-class training are all important steps in preparing for an exam, experience and research are just as important. I cannot tell you that there are 53 questions on the exam and every single question maps directly back to page 13, paragraph 3 in XX book. However, If you have the classroom material, and you have the list of exam topics, you should be able to find most of the information you need. In some cases, if you are not completely familiar with a specific topic, or you don't feel like the information in the book gives you all the information you need, you may need to do a little additional research. This is all part of preparing for an exam. This process is what makes you successful as a certified professional.
Your focus seems to be solely on the course materials that you have and what volumes and chapters you should read. I'm trying to give you a different perspective - preparing for an exam is not necessarily about taking one course or reading one book and being ready. You need to review the exam topics and be sure that you are familiar with each topic.
Regards,
Brandye Barrington

I have a question about how to contact HR with e-mail.

I read the rules about anything about HR is not allowed, but I also read to contact HR directly, so I won't ask anything further here. My question is, how? I searched for an e-mail, but all I have been able to find is a phone number I can't ring since I have no phone, just internet. Thank you.

Hello Dennis,
If you're a Best Buy or Geek Squad employee and do not have access to a telephone, then two alternative contact options exist for you: speak with your direct supervisor or use the My HR app within Employee Toolkit. If you are not a Best Buy employee, however, our HR support team will not be able to assist you -- these contact channels are for employee use only.
Thank you for your understanding, as well as for taking the time to post.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Newbie: Question about patching

Hi all,
Just brought a new iMac running 1.4.x (don't know the minor revision).
Got all the latest and greatest patches running on it, apart from the latest bundle that includes Safari 3.0. I need everything in this release / patch - APART from Safari 3.0. (The Mac is used just for testing website developments).
So my question is, how can I install all the latest security updates but leave out Safari 3.0?
Cheers,
Steve.

>Is that more or less correct, generally speaking?
Yes, generally speaking. Each color needs to be isolated on a single plate, and it makes no difference what those plates are called, as long as both you and the printer agree on what the names mean. The advantage to using a spot color swatch from one of the libraries is that your screen representation will look something like what the printed output should be (but never rely on the screen for spot colors, use a swatch book, because many spots can't be represented accurately in either CMYK OR RGB.
>Why can't I create a PDF that uses a spot color?
PDF can contain spot colors just fine, but they need to be spot colors in the original application, and the export or print to PDF that generated them must not convert them to CMYK or RGB.
Lots of things can LOOK like they are only one color, but in fact are RGB or CMYK mixes. This would be particularly likely with content created in Photoshop, where you must use a spot channel or multi-channel mode of some sort to work with spot colors.
>why do I get complaints that the printer won't recognize the PDF?
Can you explain what you mean by this?
Peter

Question about Dreamweaver Native Mobile Apps with PhoneGap

I am trying to determine the best way to build an app for my business. It doesn't need to be anything fancy, but needs a clean UI that is easy to navigate and interfaces with an online database. The PhoneGap intergration with Dreamweaver 5.5 seems really intriguing, but before I spend the $650 to upgrade my creative suite, I had some questions.
Doing some research, I have found multiple references to apps created in this way running slowly. Noticable lapses on button pushes, pages loading slowly, etc. Is this an issue and if it is, is there any way to get around it?
Idealy, I would deploy my app to both Android and iOS devices, how smoothly does that run? I have some basic knowledge of both Java and Objective-C, but using dreamweaver seems to be quite a timesaver.
If anyone has any input or comments about using Dreamweaver to create native mobile apps I would love to get some feedback. Thanks!

PhoneGap builds mobile apps with HTML, CSS, and JavaScript. You cannot use a server-side language, such as PHP, with PhoneGap.
Presumably, you want to connect with a MySQL database on a remote server. To do so, you would need to use Ajax to send and receive data from the MySQL database. You can use jQuery to send and receive data as JSON. PHP has JSON functions that decode and encode data as JSON strings.
How difficult or easy you would find setting this up depends on your knowledge of jQuery and PHP. I don't know of any tutorials that show how to pull everything together for PhoneGap, but it shouldn't be too difficult to find tutorials for using jQuery Ajax to communicate with MySQL.

A QUICK QUESTION ABOUT ANYCONNECT THIRD PARTY CA WITH OCSP RESPONDER.

Hi guys,
i have successfully implemented anyconnect with a third party ca server (EBJCA) and CRL for revocation checking.
Now i want to implement OCSP instead of CRL.
I followed this document:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00809a3fa5.shtml
In this document it is mentioned that :
Configure OCSP
Configure OCSP Responder Certificate
The OCSP configuration can vary dependent upon the OCSP responder       vendor. Read the manual of the vendor for more information.
Obtain a self-generated certificate from the OCSP             responder ?
Follow the procedures mentioned previously and install a             certificate for the OSCP server.
Note: Make sure that revocation-check is set to none.                 OCSP checks do not need to happen on the actual OCSP server.
1- My question is how to generate a self signed certificate from OCSP ?
2- If we are not able to get a self signed certificate from OCSP Responder, is there any other work arround ?
3- last why we use certificate mapping rule for OCSP certificate mentioned in the DoD's document.
feel free to share your views.

> does the client (e.g. clients using CAPI/CAPI2) also check the "Third-Party Root Certification Authorities" X509 store or do the Certs in this logical store also reside (get copied to) the "Third-Party Root Certification Authorities"
X509 store
yes. Trusted Root CAs container is an aggregated container for all trusted root CAs (for natively trusted CAs and for Root Certification Program members).
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

Question about heat & system fan ? with Corecenter software?

hello guys,
i am having some strange experience well i just happened to clean my CPU well just external clean with cloth well then when i started i heard sound of some sort it turned out to be a plastic piece with the fan anyway i just did not do anything else well recently my CPU is very running cool i mean does System temeperature goes high will my CPU fan go high too i mean i dont' get a reading for my System fan speed in corecenter why ? can i do something about it please tell me. ? should i check the inside of my CPU well i am no expert but i am still ameteure well what do you say

I don't think CoreCenter uses the system temperature to control fan speed.
Is your cpu fan still working? When you say a plastic piece is broken, do you mean a fan blade? If so you should replace the fan.

Question about patching

Before I make a fool of myself on a devel ML that I really shouldn't be on, can someone confirm something for me?
I have a patch that starts something like this:
--- file.c.orig 2006-03-31 14:37:18.000000000 +0200
+++ file.c 2006-03-31 14:41:10.000000000 +0200
@@ -65,6 +65,15 @@
#define FOO_BAR
#include <foo/bar.h>
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15)
+#include <bar/foo.h>
+#else
My understanding of this is:
- Line 65 of the unpatched file shoud read #define FOO_BAR
- Line 66 should read #include <foo/bar.h>
- Line 67 should be blank
- The lines beginning with + will be added after the existing line 67
Is that correct?
TIA, anyone who's bothered.

Many thanks, stavrosg.

Questions about patching in eBS 12.1.3

Hi everyone,
Currently, we have an installation based in 12.1.1. fresh install which was evolved to 12.1.3 althougth pacthing.. it was done by freelance and now we need to install a few patches by functional problems.
So, we need to solve a few doubts:
1.- I suposse that we should to apply patches with adpatch.. Is it correct?
2.- We have down all services in application tier but ... do we need to put maintenance mode with adadmin in application tier?
3.- What parameters should we use with adpatch? we have one application tier and one database tier (apply=Y, pre-install mode =N, ...)
4.- Does it exist any pack for patching and clonning with any tools as OEM? I think that it exist and it could improve our work.
Best Regards,
Ricardo

Hi,
PFB answers:
1.- I suposse that we should to apply patches with adpatch.. Is it correct?Application patch using adpatch and db patch using opatch. Patch readme will guide you.
2.- We have down all services in application tier but ... do we need to put maintenance mode with adadmin in application tier?It is not mandatory to bring down services but you should bring instance in maintenance mode.
Good practice is to bring down services and put application in maintenance mode but this is not mandatroy. You can use hotpatch option to apply patch when instance is up and running and without enabling maintenance mode. This is called hot patching and is benificial for live when you cant have downtime.
Check below guide for more on this.
http://download.oracle.com/docs/cd/B34956_01/current/acrobat/oa_patching_r12.pdf
3.- What parameters should we use with adpatch? we have one application tier and one database tier (apply=Y, pre-install mode =N, ...)
Just type adpatch without giving any option.
Check below guide for more on this.
http://download.oracle.com/docs/cd/B34956_01/current/acrobat/oa_patching_r12.pdf
4.- Does it exist any pack for patching and clonning with any tools as OEM? I think that it exist and it could improve our work.? >>>> Cloning is possible through OAM
check below MOS:-
EBS 11i Creating a Clone using Oracle Application Manager (OAM Clone) [ID 398619.1]

Questions about patching a global zone with a zone defined via luugrape

Similar Messages

Maybe you are looking for