Questions are not randomizing in question pool
I have 30 questions in my question pool. I have 10 random question slides but everytime I go to quiz, the same 10 questions come up. I need help in troubleshooting this, please.
Once you launch a module and it sets up the specific questions that will be selected from the pool for that session, those are the only 10 questions you are going to see, no matter how many times you hit the Retake Quiz button. That is normal behaviour.
However, if you close down the module entirely and relaunch again at a later time, in theory you should stand a chance of seeing at least some different quiz questions. If you are consistently seeing EXACTLY THE SAME set of 10 quiz questions even after completely closing down and relaunching the session again, then that would be regarded as a randomization failure and you should report the bug to Adobe.
Similar Messages
-
Random Questions are Not Random
The Question Pool has twenty-five (25) questions, and ten (10) Random Question slides in the project. The frist time a learner takes the course the questions are randomly chosen, as they should be. Assuming the learner fails and retakes the quiz, the learner is seeing the same set of questions; not a new 'random set. Is there some setting that I am missing to give them a new random set of questions? Thanks for any help!
Sorry, but that is the way random question slides are designed. The only way to have another set of random slides is to restart the module.
Lilybiri -
This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches. Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
pool or some other RAID/JBOD structure?
Background:
I'm running Server 2012 Essentials with all Windows Updates installed. I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
USB drives. Backup is slow (takes approx 1.5 days to complete), but generally works. Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
for a total of 7.75TB. Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
ThanksMandy,
Thank you for following up on my question.
Unfortunately the article you referenced doesn't address what I am trying to accomplish.
The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection. However, it still requires that an individual backup job fits on a single disk.
What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
Thanks,
Gerry -
Large itunes library, shuffle 3G, not random loading
It was my understanding that if you plug 3G shuffle into iTunes library that is larger than size of the shuffle then the system will randomly fill the shuffle with any songs in main library until the shuffle runs out of room. When I plug my 3G shuffle (4GB) into my iTunes (library of 10,000 songs), the songs that transfer are not random. Most of the songs are from artists early in the alphabet and sometimes entire albums get transferred. I realize that statistically this could actually be random, but it seems highly unlikely. I know I could create a playlist and sync from only that, but that defeats the purpose of wanting truly random from huge library.
Is anyone familiar with this issue? Can you help? Offer advice? Thanks in advance.
Message was edited by: Peter Weiss1canadianbluespower wrote:
First Question:
How do I "selectively" synch music onto the ATV given I have more GB worth of data than the ATV capacity? Do I need to remove some sub folders from the iTunes directory? I would like to keep the reference data in the iTunes browser and not remove it.
You can choose which playlists get synced to the tv, use playlists to collect all the tunes you want synced.
Second question:
I tried streaming over the weekend by reconnnecting iTunes to my PC, and the the "loading library" messge was displayed for well over 8 hours without my being able to access any photos or music. I guessed that this was because of the size of the library. Is this typical?
At 8 hours it won't be anything to do with the size of the library.
The size of a library can make a difference to the time it takes a library to load but only in terms of maybe taking a minute or longer instead of 15 seconds or so. Actually it's the size of the library database file that counts here and not the size of all the content. For example my content occupies
1.7 TB but my database is around 22 MB, I have around 10,000 tunes and 1,000 videos of one kind or another, but if your 220 GB of content is all music you may have 40,000 tunes and a database of around 80 MB.
I am connected via Linksys Powerline, hard wired ethernet over my AC lines. Synching works well this way, but I am wondering if streaming does not do so well over this type of connection.
If I'm not mistaken AC uses one of these and I don't think he has mentioned any problems with. -
Not getting the server pool in the list of server pool
We are facing following issue. Can you please help on this. Or how can we get help on this. I would be thankful for this.
We have created a server pool which consists of two vm servers. Two vm servers we created manually.
We are using following steps to create third virtual server.
1. Click "next" on "create virtual machine" screen.
2. Click "next" on "installation media" screen
3. It asks to select a server pool from the list but we are not getting the server pool in the list of server pool which we created earlier.
We did this exercise before and we got the server pool name in the list which allowed us to create virtual machine. Now when we reinstalled the vm servers machine and also vm manager, we are not able to do this once again.Hi,
please check the status in Server Pools ( it need to be in Active). then check in the Servers the status need to be in active in VM Manager. -
Cp4 - question pool - time limit not working
I am putting together a bunch of quiz modules & I am having so many problems with this, it's driving me crazy!
I am using question pools & I have a bunch of questions in my pool. I am trying to edit the questions to place a time limit on each one. When I edit the question, I choose the Options tab & select Show time out message. I then choose the Reporting tab & enter a time limit of two minutes. Yes, the Time limit selection box is checked.
Now, when I look at my question slide - there is no time out message & when I publish my module... the question has no time limit!
The crazy thing is that I have been putting these modules together all day & this is the first one that is acting this way! I have successfully added time limits to other quiz modules.
One thing I tried.. was to save the problem captivate file & then re-open... but when I look at each question's properties - they all have the time limit defined. So it is saving the info, it's just not implementing it.
I'm running into all kinds of crazy problems with my question pools... (among other things, the question pools manager won't save any of my edits to the questions!)
any advice?
thx in advance...Yes, I have a few threads going... I'm having a lot of problems!
The other thread that Rod is helping me with is related to a different issue.... although it's still quiz-related.
Here is a quick outline of what I'm doing here. I have a small file that I'm using as a template. It has 44 slides in it - 2 intro slides, 40 random quiz slides, and 2 ending slides. I have a question pool defined that has one question slide in it - I'm just using this a placeholder for now.
So, what I'm doing is using the template file as a starting point. I then copy/paste question slides from other captivate files into my question pool. I am creating a master quiz based on previous quizzes. So there are anywhere from 9-12 captivate files that I'm taking questions from and copying into my new question pool-based quiz file. This is where things are going wacky. The problems I'm running into are really unpredictable.
I'm thinking maybe the files that I'm taking the questions FROM might be corrupted in some way? Although, in the original files, the questions do NOT have a time limit. This is something new I am adding after I bring them into my question pool.
I will do what you suggest... if you have any other ideas, I would surely welcome those as well!!
Thanks Lilybiri... -
Quiz slide not advance when using question pools and advance answer options?
Hi,
I am using CP 5.5. I created a small test where I have just 2 question in a question pool. The questions are using the advanced answer options to show some specific feedback. When I insert the questions in to the project using a random question slide, after the user answers where you should be able to press Y or click to move on, I click, but nothing happens. You can't get off the quiz slide. The quiz slides work fine when they are inserted in the project as reqular quiz slides, but not when they are being pulled from a question pool.
Is this a known bug? Is there a workaround? Anyone else run in to this?
Thanks!
LoriI was having the same problem on the last Random Question slide (total 10 RQ slides), and was able to fix it by following the next steps:
Make sure Quiz: Pass or Fail actions are set to Continue for both Passing and Failing actions in the quiz preferences.
Delete the RQ slide not advancing, then duplicate one of the RQ slides working, and assign your question pool to the new slide if different from the original duplicate. This step will make sure you are using a good working RQ slide.
For some reason, my last RQ slide was corrupted and wasn't advancing to the Score slide at the end of the quiz.
I can finally finish this project.
Good luck. -
Convert to Question Pool random questions?
We are updating a course we developed last year (prior to
Captivate 3). This year we want to apply Captivate 3's "Question
Pool random questions" to this course. Is there a way to create the
question pool(s) in this existing quiz, and then add last year's
questions to them without having to re-enter each question into the
Question Pool Manager?
Thank you for any tips!Hi Jan
Sure thing. Just convert the version 1 or 2 project to a
version 3 project. Then define a Question Pool. Once you have done
that, switch to Storyboard view. Select the question slides you
wish to add to the pool and right-click. You should be presented
with an option to add the selected slides to the pool.
Once you have moved the question slides to a pool, you would
then insert Random slides that point to the pool.
Cheers... Rick -
Grabbing Random Questions for the Question Pool
Hi Everyone,
I am interested in exactly how the Random Question Pool
works. Let's say there are 50 questions in the question pool and
you want 10 questions from that question pool of 50. When you
publish I understand you will get 10 random questions from the 50
questions. Then when you run your published project are you always
going to get the same 10 questions or another 10 of the 50 pooled
questions everytime your run that same published project? Or do you
have to publish again, calling the quiz another name to get another
10 of 50 questions from the question pool? I appreciate the help on
this.Hi slewis6337
It is my understanding that each time you
display the Captivate output, you see a totally random
question. So if your question pool contains 50 questions, each time
your Captivate output presents the random question and draws from
the pool, it is truly drawing a totally random question.
I do believe that Captivate does keep track of which
questions have been used in the pool. To test this, try creating a
pool containing three questions. Then create four random question
slides that point at the pool. Then try running the Captivate. You
should see that as random question number four is encountered, the
screen goes totally gray. This is happening because you have
exhausted the question pool.
Sincerely... Rick -
I am trying to ask the following question: Just updated my iPhone5 to V 7.1.2 and can no longer print to my MFC 7860W from this phone. I researched this issue on this forum and found answers from last October/November..... Wary of downloading anything that was posted that long ago. Wondering if there is anyway around this issue, with more recent information? I was able to use this printer in the past by using Brother's iPrint App.
Thanks!!
But when I hit post, I get an error message at the top - "you are not allowed to change this content" Can anyone help me?I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry -
My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert -
My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert -
My husband and I both have i phone 4 on the same itune acct but his phone is saying its a new device and will not let him buy anything off of our acct without answering security questions. these questions are not the ones we set up the acct with. my iphone device is not having this problem. Help!
I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.
-
My foolish husband put his apple password on a website. Apple has suspended his account. He is not getting the reset password emails and the security questions are not the ones he used. We live in Malawi where there is no phone support access. How can he contact apple by chat or email (through a different account) to start getting his emails back?
Hey Debbie,
Welcome to Apple Support Communities.
It sounds like your husband’s Apple ID was disabled, so he tried to reset the password for the account and hasn’t received the password reset email. Take a look at the article linked below, it provides troubleshooting tips that will resolve most issues receiving password reset emails.
If you didn't receive your verification or reset email - Apple Support
And, to answer your question about contacting Apple for help with the disabled Apple ID, this article outlines the options for getting help with Apple IDs.
Contact Apple for help with Apple ID account security - Apple Support
Cheers,
-Jason
Maybe you are looking for
-
how do i fix the screen of death on my ipod
-
Hi all , I have small question related to bad query . what is the affecting happens to database if there is lot of bad query , i know the performance issue is there what's other things .like archive log generated database time , IO , TMP tablespace ,
-
How do I recover missing music after subscribing to iMatch?
I had 152 songs on my iPhone 5. I recently subscribed to iMatch so I could have access to the music on other Apple devices; iPad, iMac, etc . . . When I turned on iMatch, only 25 songs were available. What happed to my other music and how do I recove
-
Hello, I installed all of the software which I believe is needed to create a website from scratch. I am stuck trying to figure out if I need to use JDeveloper or SiteStudio to create a simple hello world home page. Off the OUCM tab under WinXP is Sit
-
hi all.... i wan new in swing how can i add check box in each node of my jtree? tis r my full program..... pls help me... tz..........very much //FileTreePanel.java package com.y import java.io.*; import java.awt.*; import java.awt.event.*; import ja