Questions in Ad Hoc Query & How to Configure the EEO standard reports

Hi all,
  I have a  question in Ad hoc query report in HR.
<b>How to:</b> Get a list of the total number of employees included in a particular report at the end of the report. Ex: If i create and run a report for salaried employees, sorted out by company codes, how can i get a sub-total and total no. of employees listed in the report.
I tried Ranked format, but when you print the report it doesn't retain the report name on the top.
-->I have a question regarding the Standard reports for EEO and AAP
<b> How do I</b>
1. Start configuring these report
2. What are the things i should have before configuring it in IMG
If anyone can provide me with some documentation regarding the EEO and AAP report configuration that would be great.
Thanks in advance.....
Harish

This can be done using the security for the Infoprovider,  provide the users access to create queries only for that Infoprovider.

Similar Messages

  • How to configure the JMS application in WSAD 5.0

    hi
    i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
    can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
    thanks in advance

    Hi,
    did you check the WebSphere documentation or ask a question on an IBM forum?
    Frank

  • How to configure the .ini file with applet

    hai
    i am using native methods in that methods they use some ip addresses. when i am using that native methods in applet run the applet using appletviewer tool it works fine but when i am open that applet using html page browser not configure that .ini file data .how to configure that .ini file with browser

    Hi Jay SenSharma,
    Thanks for your immediate response.
    I saw your URL links, But in your link give the recursive deployment using wlst. But my question is how to configure the oracle weblogic library files into Admin server & Managed Servers by using the wls.jar file through wlst script to create the new domain.
    But if create the new domain by using GUI mode then we manually give the admin server port number & managed servers port number and name.
    By default the library files are configured with the Admin server in GUI mode. But the Managed server the Library files are not configured with the Managed servers. Then we manually select all the library files to the corresponding managed servers. Then only the applications are deployed into the corresponding managed server.
    Regards,
    S.vinoth Babu

  • How to configure the XI  and PLM in discovery box

    How to configure the XI (SLD, Integration repository, Integration Builder ) in  SAP discovery system.
    And also i want to configure the PLM and xRPM within R/3 of discovery box.
    Regards,
    Nilesh Damle

    Hi Frank,
    well, first of all, your application provides log configuration information using an XML file at deployment time. This file is called log-configuration.xml (you can see the DTD description here: http://help.sap.com/saphelp_nw04/helpdata/en/48/ef8748caed894bb4b3ae953a60c592/frameset.htm). There you can set configure log controllers, which could be two types: location and category. So, you can specify your location and severity there. This is described here: http://help.sap.com/saphelp_nw04/helpdata/en/35/671c0136b4714c9e1b16b68211287b/frameset.htm.
    Then, after the application is deployed, the log configurations you provided for it are registered with the Log Configuration tool I mentioned about. Using this tool you can later on modify your configurations at runtime (for example, change the severity level) without having to redeploy the application.
    I hope it's clearer now? I guess it was me not getting your first question correctly that caused your confusion.
    Greetings,
    Ivo

  • How to Configure the Clustering in WL  6.0

    Describe the procedure of How to configure the Clustering in Weblogic-6.0 with all Possibilities.
              

    Please define the universe in ten words or less and provide three examples.
              Do you have any more-specific questions?
              Peace,
              Cameron Purdy
              Tangosol Inc.
              << Tangosol Server: How Weblogic applications are customized >>
              << Download now from http://www.tangosol.com/download.jsp >>
              "Ramanathithan" <[email protected]> wrote in message
              news:3b8c2387$[email protected]..
              > Describe the procedure of How to configure the Clustering in Weblogic-6.0
              with all Possibilities.
              

  • How to Configure PeopleTools 8.49 Report Manager ?

    Folks,
    Hello. I am using PeopleTools 8.49. I run a process in Process Scheduler successfully but cannot see its output report. It seems that there is a procedure to configure Report Manager at first so that all reports are stored in Report Manager after run processes in Process Scheduler.
    Do any folks understand how to configure PeopleTools 8.49 Report Manager properly ?
    Thanks.

    Report Manager is a utility in PeopleSoft to view Reports from a different place than Process Monitor. Navigation: Reporting Tools -> Report Manager. It has fours pages: List, Explorer, Administration and Archives.
    PSDSTSRV generates a message after a process gets posted in process monitor in order to display reports in Report Manager - List and Explorer page. Hence Integration Broker setup needs to be done and PUB/SUB App Server Processes required to be up and running. Here are the configuration steps:
    - Navigate to PeopleTools -> Integration Broker -> Integration Setup -> Service Operations
    - IB needs to be configured for four services
    •PSRF_FOLDER_CREATE
    •PSRF_REPORT_CREATE
    •PSRF_REPORT_DATE_CHANGE
    •PSRF_REPORT_DELETE
    - Open Service Operation PSRF_FOLDER_CREATE and make it active in General tab.
    - In Handlers tab add a handler and make it Active. Handler name might differ from the screenshots's name but the Application Class definitons must match. Package name is same as the service operation name.
    - In Routings tab, add a routing definition and make it active. Not sure, but I think only one routing definition must be active at a time... Sender and Receiver node are the local nodes - in my case it is PSFT_HR... to confirm your local node, go to PeopleTools -> Integration Broker -> Integration Setup -> Nodes and search for node...
    - Repeat the above activity for rest of the services PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE, and PSRF_REPORT_DELETE also. Configuration is almost similar e.g., make the service active in general tab, Add a new handler and make it active (class id would differ for all) in handler tab, Add a new Routing Name and make it active in Routings tab.
    You might want to navigate PeopleTools -> Integration Broker -> Integration Setup -> Routings / Services to check your routings or Services definition and status.
    Here completes IB configuration from PIA. A prior understanding of IB setup would help troubleshooting or any kind of configuraiton understanding in case something looks missing here.
    Next step is to start the PUB/SUB App Server Processes... Once these server processes are up and running, reports would get displayed in Report manager - List/Explorer page.
    Of course, basic IB setup is pre-requisite for the above activity to work. This includes Gateway configuration (PeopleTools -> Integration Broker -> Configuration -> Gateway), Gateway Setup Properties (PeopleTools -> Integration Broker -> Configuration -> Gateway -> Gateway Setup Properties), Quick Configuration (PeopleTools -> Integration Broker -> Configuration -> Quick Configuration) where you need to Gateway URLs and IB domains are active.
    let me know i f u have any questions or concerns... they are all delivered nodes by peoplesoft.
    Thanks!!....

  • PR05: How to configure the expense types depending on the type of expense?

    Hi,
           We are in the process of upgrade from 4.6C to ECC 6.0. The problem is that when we are creating the expense request, after selecting the type of expense (travel expense or non travel expense) we are getting the same expense types for both the travel and non travel expenses.
    Now my question is that, is there any in error in configuring the expense types in transaction FITVFELD.
    How to configure the expense types depending on the type of expense (travel and non travel)?
    Your answer will be highly appreciated.
    Thanks in advance.
    Ramana

    Hi
    I checked with one of the SUBJECT MATTER EXPERT on T&E and it is not possible to have the expense types based on the schema.
    Thanks
    Ashok
    Award points if this is useful

  • Can AnyOne Please Tellme How to configure the HTML files

    This is very Urgent.
    1.I am using the WLS7.0 sp1 .I need to configure theHTML files which are in a
    different path how can I map them to the present DefaultWebAPP directory.
    2. How can I get rid of the port number when I am fully using in production mode.
    I have been posting this query since long but in vain. Please guide me

    1. I got rid of port number with link provided by the karthik.
    2.How can I create a link .The link appends to the defaultwebapp directory
    and checks from their .I need to know how to configure the
    HTML files which are not in the DefaultWebApp.But completely in directory.
    Any suggestions !!!!!!!
    Shehzad <[email protected]> wrote:
    1. You can create a link to that directory
    2. In order to get rid of port number, either boot weblogic at default
    port 80, or use Apache or Iplanet webserver, and use Weblogic plugin.
    That way all the traffic comming in from http will comein at port 80
    to the webserver, and would then be forwarded to Weblogic at whatever
    port it is booted.
    This is very Urgent.
    1.I am using the WLS7.0 sp1 .I need to configure theHTML files whichare in a
    different path how can I map them to the present DefaultWebAPP directory.
    2. How can I get rid of the port number when I am fully using in productionmode.
    I have been posting this query since long but in vain. Please guideme

  • How to configure the Universal Worklist

    Hi All,
    I have a requirement wherein I have to fetch the SAP mail notifications in the Portal. I have got one documentation in which it is mentioned step by step how to configure the same.
    I found that the prerequisites for going ahead .They are
    1) Enterprise Portal Plug-In 6.0 installed (WP-PI 6.0)
    2) Release 3.H or higher
    3) Internet Transaction Server
    I have configured the ITS and have successfully done the connection test.
    I am also satisfying the third point.
    As of now we dont have the Portal plug-In 6.0 installed. Can anyone throw some light like if we really require this plug-in to be installed or do we have some other approach.
    I have also created the iview and have assigned to the standard role. But still I am not receiving any SAP notifications in my standard UWL iview.
    Let me know if you have any questions with regards to the thread.Looking forward to you.
    Regards
    DK

    Hi,
    To the best of my knowledge you cannot have the mails that are displayed in the Workflow Inbox (SBWP) (Maybe someone has a solution for this) within the SAP GUI, display in the UWL. For this I guess you will have to use the alert framework to generate alerts which is sent to the UWL.
    For more information about the alert framework please refer this document:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/82/106c449a384db2a4c1909c121693e7/frameset.htm
    Hope this helps,
    Sudhi

  • How to configure the file adaptor so as to send an sample XML message.

    Hi all ,
    I had done the configuration and now i want to test the scenario but i dont now how to do that ?.
    how to configure the file adaptor so as to send an sample XML message to the integration server ?.
    I am totally new to XI.
    please help me out how to do it.
    its an urgent.
    Thanks,
    shuja

    Hi,
    I think you should post your question Process Integration (PI) & SOA Middleware.
    Regards
    Message was edited by:
            Shehryar Khan

  • ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

    I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
    Or as something else to implement it?
    My configuration for SLA monitor:
    sla monitor 123
     type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
     num-packets 3
     timeout 3000
     frequency 10
    sla monitor schedule 123 life forever start-time now
    track 1 rtr 123 reachability

    Hey cadet alain,
    thank you for your answer :-)
    I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
    Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
    3
    Nov 21 2011
    18:29:56
    77.xxx.xxx.99
    59068
    80.xxx.xxx.180
    80
    TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
    The attached file is only the show running-config
    Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
    Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
    Regards.
    Chris

  • How to configure the mail in Sales Support of SAP SD

    Hi,
    Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
    users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
    company.  For this every time we are changing the sold to party in quotation and taking printouts then
    sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
    implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
    once to our 300 users  may i know about how to configure the mail for this scenario.
    Thanks and Regards
    MH

    Hi  Prashant,
    Thanks for you immediate responce, Can you give me the configuration steps in detail.
    Thanks and Regards,
    MH

  • In Exports sales process, how you configure the Duty Draw Back

    in my case
    we r creating Exports but
    duty unavailability of time and time taking process in export processing
    we are creating Excise invoice and cenvat is debited .
    now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
    how to manage this duty back and what r the replications or changes thereafter
    thanks in advance

    Hi Sunitha,
    Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
    thanks,

  • Can anybody explain how to configure the Centralized contract in SRM 7

    Hi All,
    Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
    Thank you,
    praveen

    Hello,
    PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
    Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
    Best Regards,
    Rahul

  • How to configure the email in SAP

    Hi Experts,
         Can you please let me know how to configure the email in the server?
    Thanks in Advance
    Regards,
    Kuldeep Verma

    Hello Indu Rayepudi ..
    I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
    Mi sap es SAP ECC 6.0
    The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
    But nothing happens.
    Do you have any idea? any help from you, I would greatly appreciate .. Gina
    Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
    Edited by: GCH on Sep 25, 2008 11:24 PM

Maybe you are looking for