Questions regarding Project Creation - SOLAR_PROJECT_ADMIN

Hi,
I went to tcode SOLAR_PROJECT_ADMIN and created a project called ZTEST. Internally there is a tab IMG project from where i created a project named ZTEST for development system.
Questions:
1) Is the project created from SOLAR_PROJECT_ADMIN is a SMI project ?
2) IMG project created is what we are seeing in SPRO_ADMIN of solution manager .. is this right or is it the one creating in development system SPRO ?
3) Where can we can see the CTS project created for the SM1 or IMG project ?
4) Also do we need to create IMG project from SOLAR_PROJECT_ADMIN for the quality and production system type also ? or required only for development system ? if so what is the reason ?
5) I tried one project creating IMG project for quality and production but the project is not creating, but if i doonly for development system it is creating ok and maintenance cycle underneath it is creating... Any idea why ?
Thanks,
Murali.

Thanks for the reply.
So if understood correct, basically only one IMG project needs to be created that too for Dev System. Also this is the stage CTS project also got created is it correct ? which again means only one CTS project overall per SMI project.
One more question which i missed earlier:
A SMI project created with only Dev and QA in the landscape and some reqs has been assigned to it and may or may not imported some of them to QA also, later i created a Prod system and made the logical component to configure for the same and it got reflected in the SMI project also. But if i go to scheduler it is not showing the PRD system, is it something to be done manually ?
Thanks,
Murali.

Similar Messages

Question regarding the creation of a custom dynamic stamp using "Will Print" from "Set Doc. Actions

Hi all,
Using Acrobat 9.0 Professional, I have successfully created a dynamic stamp using the forums where I have added Login / Date to my own image and it works great as designed. However, the problem I am having is that when a document is stamped it becomes flat and doesn't update dynamically which does not work for my requirements.
I need to create a pdf that is stamped by myself so that other users (using only Reader) can open the pdf and when printed the stamp will print with the correct date/time (in the format I describe below).
I found a workaround (outside of a stamp) where I added a text box (called "Today") that updates everytime the document is printed by going to
Advanced / Document Processing / Set Document Actions / Document Will Print
and adding the following Java Code:
var f = this.getField("Today");
f.value = util.printd('yyyymmddhMMss', new Date());
This provides me with the unique number that I need for printing (ie: 20100317102030). It works great as an inserted text field on my pdf.
My problem is that when I use the "create custom stamp" as in other tutorials by inserting this new text field, it will not update (or display) on print, even though it was set the exact same way as the custom stamp I got working using the Adobe dynamic stamp information.
Can you offer any advice on how I can get this to work as a custom stamp? I would rather not have to create both a stamp and then overlay the text field manually as I have hundreds of documents (maybe more) to do this for.
Also, as an aside, if I could get this to work, I would also like to add Login ID that updates in the same manner as my custom date format (but one problem at a time I guess! )
Thanks for any and all help that you can provide. I looked through these forums and elsewhere, but I don't seem to see anyone else with the same problems (with solutions posted).
I really wish Adobe had a Custom Stamp creator as part of their program, with the dynamic option. It would be so easy for them and save a lot of users so much time.

Stamps are just like a inked rubber stamp, except in Acrobat you can suppress printing them and you can move them. So if you use a dated "Faxed" stamp when you fax a document, even though you can adjust the stamp before affixing the stamp, once the document is stamped the date on the document can not be changed or moved. It appears, that the use of a stamp might not be the best solution.
"Interactive" means Acrobat JavaScript programing.
With JavaScript not only can you insert variable data but also fixed text strings or a combination of both.
So your script could be updated to something like:
var f = this.getField("Today");
f.value = "Printed : " + util.printd('yyyymmddhMMss', new Date());
http://forums.adobe.com/message/1333261#1333261
Getting the 'login name" will require some special JavaScript code being added to an application level JavaScript folder that runs upon initialization and is the data or function created is then accessed by your PDF. This file will need to be installed on each user's system.
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?pid=30444

Question regarding quadtree creation

Hi experts,
I know that the use of quadtree is discouraged but I am wanted to create one on an sdo_geometry column, but it failed.
I don't quite understand why.
Does it need a particular entry in user_sdo_geom_metadata that is different from r-tree?
here is the error:
SQL> create index test_qtidx
2 on test(POINTS)
3 indextype is mdsys.spatial_index
4 parameters('sdo_level=8');
create index test_qtidx
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13206: internal error [Tessellate] while creating the spatial index
ORA-13249: Error in spatial index: [mdpridxtessellate]
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
Any ideas?
Thanks very much for taking the time to read this post.
Cheers,
F.

Hi Siva,
thanks for your answer.
I have the following enrty in user_sdo-geom_metadata:
SQL> select * from user_sdo_geom_metadata where table_name='LIDAR_SUB100';
TABLE_NAME
COLUMN_NAME
DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SRID
LIDAR_SUB100
POINTS
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('Longitude', 315262, 315264, .0000015), SDO_DIM_EL
EMENT('Latitude', 233388, 234360, .0000015), SDO_DIM_ELEMENT('Elevation', -49, 7
8, .00015))
TABLE_NAME
COLUMN_NAME
DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SRID
29903
Also, I have read that it is possible to maintain different indexes on the same column. If the user_sdo_geom_metadata table has to be changed in order to accommodate quadtree, how can two indexes be maintained at the same time?
Cheers,
F.

Question regarding Project Seven Pop-ups

Hi all,
I need to create a pop-up menu. I have not doe this in ages. I still Have the PVII product called Snap Menus, Snap Layers etc.
I am reading here that PVII PMM2 is the product of choice thses days. Also, it seems that Snap Layers/Menus isn't supported any more.
I don't often have the need to do pop-up menus. Would it be in my best interest to spend the money and use PMM2 over Snap Layers/Menus, Or go ahead and use the ole faithful?
Thanks
PF

PMM2 is much more sophisticated than ealier menus. Only you know if it's a worthwhile investment or not. This is from the PVII site.
When to step up to a full-featured menu system
If you need multiple flyouts or a vertically oriented menu, then you need to be using a fully-featured and automated menu system like Pop Menu Magic (PMM), which is designed to be used (and usable) in a multi-level scenario. PMM is carefully programmed to allow a person to move his pointing device diagonally, without the entire menu snapping shut. PMM also contains automatic features to highlight the current page link, to reposition a sub-menu if it detects that there is not enough space to fully display it - and much more. All-in-all, PMM is simply the best menu-building system for Dreamweaver users - bar none - with a totally automated user interface in which to manage all aspects of your menu code.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

A question regarding Java project in ECLIPSE IDE

A question regarding eclipse.
No offence meant.
I have added a jar file to the current project in its build path.
This executes the concerned class file which is in the jar file.
If I remove the jar file from the build path and run the project,
it still executes that class file.
I tried building a clean project and running it,but still executes the jar file and the class.
Any idea why this is happening?

A question regarding eclipse.
No offence meant.People are not usually offended by Eclipse.
I have added a jar file to the current project in its
build path.
This executes the concerned class file which is in
the jar file.
If I remove the jar file from the build path and run
the project,
it still executes that class file.
I tried building a clean project and running it,but
still executes the jar file and the class.
Any idea why this is happening?You have that class file elsewhere
or you have confused your problem statement.
Why don't you create a new project and add everything except that class/jar (whichever yu mean)

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
<b>Reward points for useful Answers</b>
Regards
Anji

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Error while creating IMG project in solar_project_admin for the CHARM maint

Dear Experts,
   I am integrating the r3 system to the charm process.
I have created the maintainenace project in SOLAR_PROJECT_ADMIN
                                           gave tha logiccal component(TMS is configured ( DEV--> QA --> PRD) .
Now when i create teh img project for this it is throwing the error as below.
*S:No authorization to:000 on as a trusted system (Trusted RC=1).
Message no. No authorization to000
\I have all the roles to my user id mapped
Trusted rfc's
S_RFC
S_RFCacl
etc......
What might be the error................??
my need to be create in the clients 000 for which i am omplementing the charm..........??
What are the roles should be given in 000 client.
Regards,
Umesh
jsumesh85 at gmail

Hi Umesh,
Please confirm your problem by as issue with the trusted system, check the link below
[Trouble trusted system|http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm]
No authorization to log on as a trusted system (trusted RC = <0 1 2 3>).
Here, the trusted return codes ( = 0, 1, 2 or 3 ) have the following meanings:
1   Calling system is not a trusted system, or security
     ID for the system is invalid.
     Solution: Create (again) the trusted system (see above).
as of in trusted system, you supposed to get the same user in both the systemm witht the respected access like S_RFCACL.
complete explanation of trusted RFCs is in note 128447.Please follow the note
Thanks
Jansi

Validation of Enterprise Customer Fields in Project Creation Page

I want to do the validation on the Enterprise Custom Fields of PWA site for Project center. A set of custom fields have been added on the Project Creation Page.
Custom Business Validation (such as a field value should be unique or based on another field) is required for some custom fields. This validation is required on clicking Save button in Project Creation Page of Ms Project Server 2010. The validation ought
to be done on clicking "Save" button.
Any help in this regard would be apppreciated.

The link mentioned by you ToonS is not acessible.
Here is the link:
http://msdn.microsoft.com/en-us/library/office/gg615466(v=office.14).aspx
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens. If you know what's wrong please let me know.

Hello, I have a question regarding the sharing on iMovie. I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie. I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens. If you know what is wrong/ what I am doing wrong please let me know.
Thank you.
PS: I am using iMovie 10.0.6.

/*line 957 error */
     public void select()
          for (count = 0; count <= p; count ++ )
               if(P[count] != null){ /* validation */
               m = (int)(P[count].getX());
               n = (int)(P[count].getY());
               if (Math.pow(-1, m + n) == 1)
                    piece[m][n].setBackground(wselect);
               else
                    piece[m][n].setBackground(bselect);
          step = 2;
     }

Error in project creation using Netweaver studio

Hi all,
I am trying to create a new Composite Application Services project using Netweaver studio 7.011. When it came to the final step of the Project creation wizard, an error message pop-up saying "Problem when creating project".
I have tried the methods posted in the forums, but its doesn't work for me.
"Problem when creating project"
Problem creating a composite applications project
Can advise on how to resolve this?
I am currently using Java 1.4.10 and NW2004s SP11.
Thanks a lot.
Regards,
aiwei

Yes, I can write to the folder.
Any clue?
I cannot proceed to create project with this error.
Can advise?
thank you.

A question regarding Management pack dependency.

Hi All,
I am new to SCOM, I have a question regarding management pack dependency.
My question is, Is Dependency is required when New alerts are created in a unsealed MP and the object class selected during alert creation is (i.e Windows server 2012 full operating system) and it is on a Sealed management pack ?
For example i have a Sealed Windows server 2012 monitoring management pack.
I have made a custom one, for windows server 2012, So if it the custom is not dependent on the sealed Windows server 2012 monitoring management pack, Then cant i create any alerts in the custom management pack targeting the class Windows server
2012 full operating system ?

Hi CyrAz,
Thank you for the reply. Now if your's and my understanding is the same, Then look at the below what happened.
I created a Alert monitor targeting a Windows Server 2012 class in my custom management pack which
is not dependent on the Windows server 2012 management pack, But how was i successfully able to create them when the dependency is not there at all, If our understanding is same, then there must be an Error thrown while creating the monitor its self right
? But how was SCOM able to create that ?
Look at the below screenshot.
I was able to create a monitor targeting Windows server 2012 Full operating system and create a alert on the custom management pack which is not at all dependent
on the Windows server 2012 Sealed MP.
Look at the dependency of the management pack where i do not have the Windows server 2012 management as my custom management is not dependent on that.
Then how come this is possible ?

Questions regarding *dump_dest parameters and fast_recovery_area

Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PM

Hi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     4
Next log sequence to archive   6
Current log sequence           6
SQL> show parameter recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size           big integer 4032M
recovery_parallelism                 integer     0
SQL> show parameter control_files
NAME                                 TYPE        VALUE
control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                     /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      ocpdb
SQL> show parameter db_name
NAME                                 TYPE        VALUE
db_name                              string      ocpdb
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
SQL> show parameter %dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

User exit during project creation

Dear ALL,
I want to know is there any user exit at the time of project Creation ( CJ20N / CJ01). Actually the requirement is the system should restrict the user if the user selects the wrong project profile during the initial screen and not during saving .
Thanks in advance.
Regards
Nitin

Hi Virendra,
I am new to PS , can you please help me to get prepopulated project profiles .
Thanks
Nitin

Questions regarding Project Creation - SOLAR_PROJECT_ADMIN

Similar Messages

Maybe you are looking for