Questions regarding proofing Epson Fine Art Papers in Photoshop CS5

Background. I have an Epson Pro Image printer—4900. I use Epson photo papers and usually print on glossy, luster and semigloss paper. Recently Epson sent me what they call a “Signature Worthy Sample Pack” of photos papers—specifically, Hot Press Bright, Hot Press Natural, Exhibition Fiber Paper, Cold Press Bright, Cold Press Natural, Velvet Fine Art and Ultra Premium Luster—my reward for spending lots of money on one of their printers.
My problem. I soft proof before I print. When I soft proofed using Epson’s profile for Hot Press Bright with Matte Black Ink, I chose Relative Colorimetric for Rendering Intent, checked Black Point Compensation, and checked Simulate Paper Color under my On-Screen display options. When I checked the last—Simulate Paper Color—a haze appeared over my image. If I unchecked Simulate Paper Color, the haze disappeared. I tried adjusting for the haze, but could not match my original and so got rid of the adjustments. I then printed my original using Epson's profile for Hot Press Bright Matte Black. It printed without the haze—beautiful print. Then, I tried the same with Velvet Fine Art. Soft proofing gave the same result—a haze when I selected Simulate Paper Color, no haze when unselected. I printed the original using Epson's profile for Velvet Fine Art, but this time, unlike printing with Hot Press Bright, the print had a hazy overtone.
Finally, my questions. Are there times when I should and should not check Simulate Paper Color? Is there something I might try to correct the haze in the Velvet Fine Art print? I have not yet tried the other papers.

You'll have to ask Epson about that.
Those settings are controlled by the driver.

Similar Messages

PS cc doesn't show Fine art papers in the printer menu

Hi
I recently bought a new printer Epson Stylus Pro 3880 and I use it with PS cc. But in the printermenu I just can't choose Fine art papers - isn't highlighted.
All my programs and drivers are up to date!
Does anyone here have a solution to my problem?
Thanks,
Steen.

Hi Trevor,
I'll try. Thank you.
Steen.
Den 02/01/2014 kl. 22.55 skrev Trevor.Dennis <[email protected]>:
Re: PS cc doesn't show Fine art papers in the printer menu
created by Trevor.Dennis in Photoshop General Discussion - View the full discussion
I bet there is a leaflet in the box the print paper came in, that gives a list of profiles for various printers. Alternatively, go to the paper maker's website and look there.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5975086#5975086
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5975086#5975086
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5975086#5975086. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Print on Fine Art Paper using Epson 9900.

Printing. Sigh.
I can't get the "Fine Art" Epson papers "Hot Press" or "Cold Press" to show up in the printer dialog box. (I pay by the hour and the square foot to use the 9900 to print works for a show that opens in two weeks, so this is both pressing and costly.) I have tried everything I could think of (details below). As a work-around, I exported 16-bit TIFFs, opened them on another machine in PS-CS6, and printed them. The Epson Hot Press paper can be selected in the PS print dialog on that machine. The print looks excellent.
OS 10.8.5 on an Intel 2.7 GHz Core i7 MacBook Pro w. 16 GB RAM.
Aperture 3.4.5
(No beta-ware installed.)
PS-CC (14.1.2 x64) on this machine. (Do not have the version number of PS-CS6 that is installed on the other machine.)
My studio printer is an Epson 3880. On that printer, I have to select one of the print dialog "Paper Size" presets with "(Manual - Rear)" in the name in order for the full complement of Epson Fine Art papers to show in the "Printer Settings➞Basic➞Media Type➞Fine Art Paper" drop-down of the printer dialog box. (I am using "print dialog box" to refer to Aperture's print dialog, and "printer dialog box" to refore to the OS print dialog box that comes up after clicking "print" at the bottom right of Aperture's print dialog box.)
The 3880 does not accept roll paper. One of my reasons for using the 9900 is that it does accept roll paper. There are no "(Manual - Rear)" presets that I could find for the 9900.
Oddly, in PS-CC (this machine), I cannot specify "Hot Press" either. Only on the other machine (which is at the community arts center lab where I print) does "Hot Press" show in the fine art paper types. That machine does not have Aperture installed.
I have updated my 9900 driver, and downloaded the most recent ICC profiles for the paper. I installed the profiles in both the system library and my user library. I can select the profiles.
The current driver listed on Epson's site is 9.04. The version which shows in "System Prefs➞Print and Scan➞Epson Stylus Pro 9900➞Options and Supplies➞General➞Driver Version" is 8.64. I have re-downloaded and re-installed. Twice.
I have rebooted, hard and soft.
Any suggestions?
Thanks.
Cross-posted to Luminous Landscape.
Kirby.

Just a hunch, Kirby. I looked at the Epson support page:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=119098&prodoid=63079720&foid=125986&cat=53461&subcat=53466
and found in the FAQ:
Selected FAQ
Q:
Why are only matte media types displayed in the driver’s media list?
A:
When matte black ink is selected in the printer driver, only matte media types are displayed in the driver list. The complete media list appears only when the photo black ink is selected.
Do you have any possibility to select the ink in the driver - matte or not? And are you trying to print glossy?

Icc profiles fine arts paper grayed out in Lion

Running Lion, In the print dialogue box, I can't access the icc profiles for Epson fine arts paper, even though I have the matte black cartridge installed. In the Media Type box, the Fine Arts selection includes all three fine arts papers for my Epson 2880 printer, but all three are grayed out. However, it works fine for matte papers. My icc profiles (including the three for Epson fine arts papers) are installed in ~/Library/Colorsync/Profiles, also in HD/Library/Colorsync/Profiles. Any suggestions?

Same problem with greyed out profiles for Fine Art Papers
The ICC Profiles for the Epson fine art papers that I downloaded from their site are coming up with errors in the ColorSync Profile First Aid. I redownloaded the profiles, but they’re still showing up as bad profiles and they can’t be fixed.
Sample error:
Header padding is not null.
Tag 'DEVD': Tag reserved field is not zero.
Tag 'DEVS': Tag reserved field is not zero.
The file is locked. Could not be fixed.
So what do I do now?

Fine Art paper selection greyed out.

I am using PS5 with a MAcBook Pro (OS_X 10.7.5) with an Epson 3880 printer. The paper selection menu greys out Fine Art papers. I need to use those papers. Don't know how to fix this. Need help.

The selection of media type is tied to the paper feed path...some media such as fine art watercolor needs to be maunally fed. Once you select a manual feed path you should be able to access the fine art paper selections.

Which program is best for fine art images?

I am a watercolor artist who captures and prints her own fine art images using Epson R2880 printer and Epson Fine Art Velvet paper. I have thus far only used Picasa... but am now ready to step it up to Adobe... I am on the trial membership for the Cloud.. but am overwhelmed by all the programs available, like Photoshop CC and Dreamweaver... I have no idea what the differences are and which one would be best for my needs... I am really only adjusting my images for white balance, color balance, contrast, hue and saturation etc... and need to be able to isolate certain sections of the image at times to do that... (which I can't with basic programs like Picasa). Please help!!!

My goodness! You have jumped straight in with a full Creative Cloud subscription? Way to go, as we say in this part of the world.
Ahhh... Just read your post again, and I see you are on the trial. The Photographer's bundle deal would have been ideal for you, with Photoshop and Lightroom for just $10 a month, but you have just missed that, unless you have previously owned and Adobe application. But Photoshop is the way to go if you only want the one application.
There some great learning aids on Adobe TV, or get a sunscription to Lynda.com for a few months.
Someone mentioned Illustrator for line art. After using Photoshop since it was first released fo the PC, I have recently started learning Illustrator, and I'm having one jaw dropping moment after another. I had no idea it could do so much. So that might be worth considering, but only in addition to Photoshop.

Question regarding pse 8

When I have multiple pictures up, how do I keep two pictures from merging when I move one of the pictures to the side? I would like to turn this feature off.
Thanks.

I opened 4 photos into Adobe Photoshop Elements 8 and have set the pictures to "float in all windows" so I can easily grab any one of them and move them to compare pictures.What happens is that the picture I am moving fades and suddenly I have two pictures, one on top of the other in one frame. In the bar at the top of the "merged" picture, it shows the file names of two pictures. From that top bar, I can undo the "merge" by grabbing one of the pictures and dragging it to the left or right, and I am back to the two original pictures. I would like to be able to move pictures around without two frames becoming one frame with two pictures layered. Hope that is a better explanation. Thanks. DianeDate: Mon, 29 Oct 2012 12:47:56 -0600
From: [email protected]
To: [email protected]
Subject: Question regarding pse 8
    Re: Question regarding pse 8
    created by hatstead in Photoshop Elements - View the full discussion
I don't understand. Multiple pictures up - what does that mean?2 pictures merging when you move one to the side - how do you make them merge and move to the side?Feature off - when does this feature come on?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4808688#4808688
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4808688#4808688
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4808688#4808688. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

Printing to Fine Art "Museum Etching" Error

Having an issue with printing Fine Art "Museum Etching" paper on my Canon Pixma9000 printer. This wasn't an issue until switching to a Mac, using Adobe Illustrator CS4. I recently purchased Canon's Fine Art Museum Etching paper and when selecting that media type within Illustrator CS4, and printing, I get this error message.
"Error Number : 88 The media type and paper size are not set correctly. Cancel printing, correct the settings, and print again. If you selected Fine Art "Museum Etching" as the media type, you need to set the paper size appropriate to the art paper."
I have tried every different type of A3+ (13x19) paper sizes from the dropdown in the Illustrator CS4 print dialog panel, and get the same error every time. Any help in figuring out the cause would be greatly appreciated.
Cheers,
Josh

I was under the impression that adobe color printing utility is a completely different application from PS. I am limited by the facilities ACPU provides. I cannot change the feed from the current "sheet feeder" to "manual rear feed." Fine art paper only works with the matte black ink which my printer is currently set to. I should point out that the greyed out issue does not happen in the PS print set-up. I should also mention that all other choices of media are available in ACPU. It is just the "fine art" section that is not, which does suggest it is something to do with the photo/matte black inks. However, as mentioned, my 3880 is set to matte black.
I think this is a bit of a curly one! I noticed that Epson were very quick to pass the problem on. I gather there is another way to print colour targets, used before the advent of ACPU. Image Science, the Australia Company doing my custom profiles will no doubt steer me in the right direction.

Question regarding Request Notification Template - OIM 9.1.0.2

Hi All,
I have a question regarding notification generated when a request is raised. Currently, the body of the notification is referring the requestor who raise the request (the body of email has attributes like <%Requester Info.First Name%>, <%Requester Info.Last Name%>). Its fine if the requestor is raising the request for him/her self. However, if the requestor is raising the request on behalf of another user, then this notification is causing confusions, since its referring the requestor only in its body and not the beneficiary.
Is there a way to include the end beneficiary's details in the body of the notification?
Please help in this regard
Regards
Vinay

Hi Gurus,
Any idea on this?
Regards
Vinay

I have read all the questions regarding the "Can't send photo using iMessage".

I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
It will try to send but it will get stuck just before it sends
and the red ! will appear with the "Not Delivered" status.
When i tap on the !, it just says "This iMessage was not delived".
No other message or photo is sending as the same time as the photo.
I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
What's wrong?!?!?!?!

It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

Question regarding DocumentDB RU consumption when inserting documents & write performance

Hi guys,
I do have some questions regarding the DocumentDB Public Preview capacity and performance quotas:
My use case is the following:
I need to store about 200.000.000 documents per day with a maximum of about 5000 inserts per second. Each document has a size of about 200 Byte.
According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/) i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using
a stored procedure. This would result in the need of at least 5 CUs just to handle the inserts.
Since one CU consists of 2000 RUs i would expect the RU usage to be about 4 RUs per single document insert or 100 RUs for a single SP execution with 50 documents.
When i look at the actual RU consumption i get values i don’t really understand:
Batch insert of 50 documents: about 770 RUs
Single insert: about 17 RUs
Example document:
{"id":"5ac00fa102634297ac7ae897207980ce","Type":0,"h":"13F40E809EF7E64A8B7A164E67657C1940464723","aid":4655,"pid":203506,"sf":202641580,"sfx":5662192,"t":"2014-10-22T02:10:34+02:00","qg":3}
The consistency level is set to “Session”.
I am using the SP from the example c# project for batch inserts and the following code snippet for single inserts:
await client.CreateDocumentAsync(documentCollection.DocumentsLink, record);
Is there any flaw in my assumption (ok…obviously) regarding the throughput calculation or could you give me some advice how to achieve the throughput stated in the documentation?
With the current performance i would need to buy at least 40 CUs which wouldn’t be an option at all.
I have another question regarding document retention:
Since i would need to store a lot of data per day i also would need to delete as much data per day as i insert:
The data is valid for at least 7 days (it actually should be 30 days, depending on my options with documentdb).
I guess there is nothing like a retention policy for documents (this document is valid for X day and will automatically be deleted after that period)?
Since i guess deleting data on a single document basis is no option at all i would like to create a document collection per day and delete the collection after a specified retention period.
Those historic collections would never change but would only receive queries. The only problem i see with creating collections per day is the missing throughput:
As i understand the throughput is split equally according to the number of available collections which would result in “missing” throughput on the actual hot collection (hot meaning, the only collection i would actually insert documents).
Is there any (better) way to handle this use case than buy enough CUs so that the actual hot collection would get the needed throughput?
Example:
1 CU -> 2000 RUs
7 collections -> 2000 / 7 = 286 RUs per collection (per CU)
Needed throughput for hot collection (values from documentation): 20.000
=> 70 CUs (20.000 / 286)
vs. 10 CUs when using one collection and batch inserts or 20 CUs when using one collection and single inserts.
I know that DocumentDB is currently in preview and that it is not possible to handle this use case as is because of the limit of 10 GB per collection at the moment. I am just trying to do a POC to switch to DocumentDB when it is publicly available.
Could you give me any advice if this kind of use case can be handled or should be handled with documentdb? I currently use Table Storage for this case (currently with a maximum of about 2500 inserts per second) but would like to switch to documentdb since i
had to optimize for writes per second with table storage and do have horrible query execution times with table storage because of full table scans.
Once again my desired setup:
200.000.000 inserts per day / Maximum of 5000 writes per second
Collection 1.2 -> Hot Collection: All writes (max 5000 p/s) will go to this collection. Will also be queried.
Collection 2.2 -> Historic data, will only be queried; no inserts
Collection 3.2 -> Historic data, will only be queried; no inserts
Collection 4.2 -> Historic data, will only be queried; no inserts
Collection 5.2 -> Historic data, will only be queried; no inserts
Collection 6.2 -> Historic data, will only be queried; no inserts
Collection 7.2 -> Historic data, will only be queried; no inserts
Collection 1.1 -> Old, so delete whole collection
As a matter of fact the perfect setup would be to have only one (huge) collection with an automatic document retention…but i guess this won’t be an option at all?
I hope you understand my problem and give me some advice if this is at all possible or will be possible in the future with documentdb.
Best regards and thanks for your help

Hi Aravind,
first of all thanks for your reply regarding my questions.
I sent you a mail a few days ago but since i did not receive a response i am not sure it got through.
My main question regarding the actual usage of RUs when inserting documents is still my main concern since i can not insert nearly
as many documents as expected per second and CU.
According to to the documentation (http://azure.microsoft.com/en-us/documentation/articles/documentdb-manage/)
i understand that i should be able to store about 500 documents per second with single inserts and about 1000 per second with a batch insert using a stored procedure (20 batches per second containing 50 documents each).
As described in my post the actual usage is multiple (actually 6-7) times higher than expected…even when running the C# examples
provided at:
https://code.msdn.microsoft.com/windowsazure/Azure-DocumentDB-NET-Code-6b3da8af/view/SourceCode
I tried all ideas Steve posted (manual indexing & lazy indexing mode) but was not able to enhance RU consumption to a point
that 500 inserts per second where nearly possible.
Here again my findings regarding RU consumption for batch inserts:
Automatic indexing on: 777
RUs for 50 documents
Automatic indexing off &
mandatory path only: 655
RUs for 50 documents
Automatic indexing off & IndexingMode Lazy & mandatory path only: 645 RUs for
50 documents
Expected result: approximately 100
RUs (2000 RUs => 20x Batch insert of 50 => 100 RUs per batch)
Since DocumentDB is still Preview i understand that it is not yet capable to handle my use case regarding throughput, collection
size, amount of collections and possible CUs and i am fine with that.
If i am able to (at least nearly) reach the stated performance of 500 inserts per second per CU i am totally fine for now. If not
i have to move on and look for other options…which would also be “fine”. ;-)
Is there actually any working example code that actually manages to do 500 single inserts per second with one CUs 2000 RUs or is
this a totally theoretical value? Or is it just because of being Preview and the stated values are planned to work.
Regarding your feedback:
...another thing to consider
is if you can amortize the request rate over the average of 200 M requests/day = 2000 requests/second, then you'll need to provision 16 capacity units instead of 40 capacity units. You can do this by catching "RequestRateTooLargeExceptions" and retrying
after the server specified retry interval…
Sadly this is not possible for me because i have to query the data in near real time for my use case…so queuing is not
an option.
We don't support a way to distribute throughput differently across hot and cold
collections. We are evaluating a few solutions to enable this scenario, so please do propose as a feature at http://feedback.azure.com/forums/263030-documentdb as this helps us prioritize
feature work. Currently, the best way to achieve this is to create multiple collections for hot data, and shard across them, so that you get more proportionate throughput allocated to it.
I guess i could circumvent this by not clustering in “hot" and “cold" collections but “hot" and “cold"
databases with one or multiple collections (if 10GB will remain the limit per collection) each if there was a way to (automatically?) scale the CUs via an API. Otherwise i would have to manually scale down the DBs holding historic data. I
also added a feature requests as proposed by you.
Sorry for the long post but i am planning the future architecture for one of our core systems and want to be sure if i am on
the right track.
So if you would be able to answer just one question this would be:
How to achieve the stated throughput of 500 single inserts per second with one CUs 2000 RUs in reality? ;-)
Best regards and thanks again

Since 3 weeks printing on Fine Art Paper Black and White Image, I get a purple hue on all B

Cant print using Photoshop CC, Photoshop SC6 and Lightroom profiles using Matt Ink MK on Fine Art Paper. I tried Printer Epson 4900 and Epson 2880. Always having a Purple Hue over the B and W. If I use PK Gloss Black no problem..

You will likely get better program help in a program forum Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

FF67-Manual Bank Reconciliation....question regarding automatic clearing

Hi
Dear experts,
I have a question regarding manual bank reconciliation, everything is working fine as far as FF67 is concerned but I am having a problem with auto clearing for cheques received in, I know that an algorithm decides which field should be taken into account for deciding the clearing items as the cheques issued out is working fine by the cheque number, for cheques received in what algorithm should be used and in what field should I enter that in Tcode F-28 so that it clears the document automatically. OR will I have to create a algorithm, if so from where?
Thanks to all who reply
regards

You can use an algorithm like bank reference, document search, etc. 021 or 020. While making the entries for cheque receipt (customer) you have to put the cheque number in the reference field and at the time of clearing the transactions from the statement, please ensure that the same cheque number is i put in the clearing data.

Several questions regarding File Vault

Hi!
I have several questions regarding File Vault - right now I'm using Mac OS 10.4.8
1.: The battery lock of my iBook is defect thus it happens from time to time that while transporting it the battery drops out while the laptop is sleeping. What happens with the File Vault-disk image?
2.: I want to (have to ) set up my Intel iMac again. The installer-CD I have will bring it back to 10.4.6
AFAIK the data format used for File Vault since 10.4.7 is version 2. What happens if I encrypt my stuff now (10.4.8 - thus version 2), back it up to my backup disc, install a new system (10.4.6 - therefore version 1) and want to access my data via Migration Manager (don't want to use archive and install)?
3.: How do I actually do a backup of my data while the system is running? The backup should be encrypted as well.
I use the demo-version of SuperDuper for backing up my system because with it I can ensure that I have a complete bootable backup of my running system.
Thanks for your answers in advance
ibook g4 12" 1.2 GHz 768 MB RAM / Intel iMac Core 2 Duo 17" 2.0 GHz 2GB RAM Mac OS X (10.4.8)

Parker,
You said:1. If it did, Apple would not use FileVault, as everyones computer will have a battery problem once in their life, and Apple would lose buisness from angry people who lost all of their data.I have seen enough reports of data loss with FileVault that I feel compelled to dispute your statement.
In Data corruption and loss: causes and avoidance, Dr. Smoke writes...If your data-security needs demand FileVault, you should backup your encrypted Home folder regularly, preferably daily. Like any hard drive or disk image, a Home folder protected by FileVault — an encrypted, sparse disk image — does not respond well to the causes of data corruption...Loss of power definitely is a cause of data corruption.
For Niels....,
An Unencrypted Look at FileVault, by François Joseph de Kermadec is an excellent discussion of the features, pitfalls, and cautions regarding Filevault.
Although the article discusses Panther and is dated 12/19/2003, the concepts as they apply Tiger have not changed.
The cautions and warnings are prominent in any of the Apple Knowledge Base articles referring to the use of FileVault. If a user is unfamiliar with any aspect of FileVault, it should not in my opinion be activated.
As good as FileVault is in protecting your sensitive data, it also presents the danger of locking up your files in an irretrievable ball of one's and zero's. Backups are critical. You must ensure that you have a comprehensive backup plan. Backup and Recovery, by Dr. Smoke is a fine example of what you need to consider.
;~)

Questions regarding proofing Epson Fine Art Papers in Photoshop CS5

Similar Messages

Maybe you are looking for