Queue Blocking and File picked Partially Problem ?

Hi All,
The File which is placed in FTP server having more 50000 to 65000 rows .
when XI picks the File the Partial Data is processed.
In SXMB_MONI if we check the message we are able to see some rows not full Data which was in file.
it's also blocking the Large message QUEUE -XBTM0000
while processing.
In QUEUE monitoring(SMQ2) the STATUS message is "Connnection CLosed No DATA" .
what could the reason here and also we are not able see any error related information(If it is having error) in SXMB_MONI.
it's urgent because of Production issue.
Regards
Nandan

Hi Indira,
In our scenario the Modification Check is set 5000 .
To resolve this problem what should i must do ?
Whether to decrease the present value or increase the present set value.
what will be the timing parameter Actually in Additional Parameter Tab?( SECONDS or MILLI SECONDS)

Similar Messages

Simple Channel Read and File I/O Problem

Hello
I am having a simple problem with reading in two channels from a usb-6259. I have 2 channels, reading in voltages, and I am wanting to read them in at 400K Hz. I have used the DAQ assistant and the Write To Measurement File VI. It is just a direct connection between the two. I have the DAQ assist set up for taking in N Samples, which is set to 8M because I want to take in 20 seconds worth of data at 400K Hz. Now the problem lies with the fact that I am getting a Out of Memory error. This pretty much confuses me because the file that I will get is 220MB (I know this because I put a wait and got none continuous data for a total of 20 seconds worth of data at 400K Hz), and I have 2 GB of RAM, in whic i usually have 1.3GB free when I start the simulation. So, now on to my actual question. How is this system running out of memory? How else can I program this to make this work? Any feedback on this would be great. Thank you.
Michael B
Labview 8.5

Hello Michael B,
The DAQ assistant creates a lot of over head and this may be the reason why you are running out of memory. If you keep the Task Manager open while you are running the task, you'll be able to see that the memory keeps being used up by the data acquisition process. I would suggest not using the DAQ assistant and to use the lower level DAQmx VIs.
A good place to start would be Help -> Find Examples. Within Find Examples select Hardware Input and Output -> DAQmx -> Analog Measurements -> Voltage -> Acq&Graph Voltage Int Clk.vi. Go to the Block Diagram of the VI and change the "time out" to a much larger value. You can select two channels at the same time by using a comma (eg: Dev2/ai0, Dev2/ai1). Hope this helps.

OC4J 10.1.2: Logging and File I/O Problems

Hi all,
I'm running a 10.1.3 ADF application on an OC4J server (with 10.1.3 ADF libraries installed) in AS 10.1.2. The application runs fine for maybe 4-5 hours, and then in the redirected output log, I see:
08/03/25 15:56:16 oracle.core.ojdl.LoggingException
08/03/25 15:56:16 Caused by:
08/03/25 15:56:16 java.io.IOException: Cannot create a file when that file already exists
08/03/25 15:56:16 at java.io.FileOutputStream.openAppend(Native Method)
08/03/25 15:56:16 at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
08/03/25 15:56:16 at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
08/03/25 15:56:16 at oracle.core.ojdl.BusStopLogWriter.writeBytes(BusStopLogWriter.java:240)
08/03/25 15:56:16 at oracle.core.ojdl.BufferedLogWriter.flush(BufferedLogWriter.java:159)
08/03/25 15:56:16 at oracle.core.ojdl.BufferedLogWriter$Flusher.run(BufferedLogWriter.java:396)
A few minutes later, the application stops working entirely. Nothing shows up in the log, but Firefox shows the following 500 error:
java.io.IOException: Too many open files
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.include(HttpApplication.java:4023)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:198)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:825)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Neither of these stack traces contain any lines from my application or any libraries used by my application (except core SDK). There are other ADF 10.1.3 applications in the same container; none of them seem to have this issue, but I'm unaware of any relevant difference between the applications...certainly none of them (including the problematic one) directly perform file I/O.
Does anyone know what might be causing these problems?
Thanks much,
Avrom

I solved the problem. The original download was the "j2ee and web cache" download from the Application Server area. I later found a link to oc4j downloads from the JDeveloper pages that was really what I was after.
Brad

Export for the Web and File Naming : Batch problem in Photoshop CC

Is it possible to use "File Naming" when you are using in a batch "Save for the Web" export ?
What I want to do:
I have images that I need to resize, crop and rename (change "filename.jpg" to "filename_850x490.jpg" and make an optimisation for the web
I want to create an action that I can use in a batch
What is working :
I can use my action (resize, crop, save) and use file renaming option if I use "save as" options
I can use my action (resize, crop, save for the web ...) but the file renaming option are not use at the export,
So I have to create two actions (one for resize, crop and rename and an other to compress images with "save for the web"
==> What's wrong with "File rename" and "save for the web"?
Thank You for support !
My Environement :
Photoshop CC : last update
OS : Windows 8 Entreprise - 64 bits
Proc : Intel Xeon CPU E5 3.00 GHz - Ram : 8 GB - GPU : AMD FirePro V5900 (FireGL V)

Probably a lot easier if you use the Image Processor Pro script
(part of Dr. Brown’s Services 2.3.1)
http://www.russellbrown.com/scripts.html

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Problem with blocking upload file TMG 2010

I'm using TMG 2010. I have 3 rules :
1/Allow Internet Access :
protocols : dns, http, https
from: loclahost, internal to: External
2/Allow Protocols :
protocols : all traffics
from: localhost, internal to: localhost, internal
3/Defaul Rule : Block all.
The problem is : i want to block upload file from internal to external so i've made HTTP filter in Allow Internet Access like this : Config HTTP --> Signature : Search in: Request Header
Http header: Content-Type:
Signature: mutipart/form-data
Methods : Block method POST
Unfortunately, it's not work and i dont know why. If i create a rule block web, it's work. Plesase help me. Thanks !

Hi,
You could check the following blog to see whether you missed anything.
How to block Attachment Uploads using Microsoft TMG
http://www.kuwaitgeekz.com/?p=2248
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Parallel process with a queue and file?

Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
Attachments:
Queue_Data_Parallel_FORUM.vi ‏23 KB

LapLapLap wrote:
Hello, first of all sorry for my bad english^^:
I am working for days on my project where I have to show the parallel process while transfering information by different ways and their problems (like timing and so on).
I chose the transmission of information to a parallel process by (1) a queue, and by (2) a file (.txt). (other ways are welcome, do you have 1-2 other ideas?)
To solve this problem I made three while loops, the first one is the original one, where the original information (as a signal) is created and send by queue and file to the other two while loops, where this information is getting evaluted to create the same signal.
so in the end you can compare all signals, if they are the same - so that you can answer the question with the parallelity of process.
but in my vi file i have some problems:
the version with the queue works pretty fine - it's almost parallel
but the version with file doesn't work parallel, and i have no idea how i can solve it - -
i'm a newbie^^
can someone correct my file, so both (file and queue version) run parallel with the original one, or tell me what i can or must do?
A queue is technically never parallell, though you can have several if you really need parallellism. Other methods include Events, Action Engines, Notifiers (and why not webservices) for information transfer between processes.
Due to limitations in the disk system you can only read/write one file at a time from one process, so i wouldn't recommend that. If you use a ramdisk it might work.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Shift key doesn't select blocks of files. Even after clean install of mavericks in case it was old snow leopard problem. Can only select individual files

Hi for a few months my shift key stopped allowing me to select blocks of files and worked like the cmd key selecting just individual files. Apple store sold me a. New keyboard when I connected it first time it worked. But after shutting down mac it never worked again. Have just performed clean install of new mavericks as I was told it must be the permissions or other account settings etc. But 2 days later after lots of work shift still doesn't work. Every now and then it would work once and then. Not again. I work with photos a lot and only being able to choose individual files is a nightmare. Can anyone explain this problem.?

I installed mavericks from a USB and reformatted the hd. I set up a new user account added email, apple ID etc and then downloaded new iPhoto and iMovie. I manually copied documents, music inc itunes library folder and photos from time machine back up. I also copied original apps only using migration assistant to get idvd and garageband back as despite a lot of searching i couldnt find a way to selectively reinstall original apps not purchased from app store. Only third party apps are photoshop elements 9 and office 2011.

Hi i have problem in my security question email is blocked and i cant rested my security question in second emial becouse i cant see this linked

Hi i have problem in my security question email is blocked and i cant rested my security question in second emial becouse i cant see this linked

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117310)

All of a sudden my desktop apps and files went missing.what is the cost of the problem

all of a sudden, my desktop applications, (i mean the whole applications and files,document in my desktop), went missing .what could be the cost of the problem?

all of a sudden, my desktop applications, (i mean the whole applications and files,document in my desktop), went missing .what could be the cost of the problem?

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Problems with encoding and files

Hi friends pls some help my problems is the following
I have a ftp server running on linux and in my program I download files from the ftp server using class specified below.When I download the file content not all content is coming ok. For example I have a string with
Ra�l��1234%#=?[a_@ and when I read content using my methods this part is retirved ok Ra and this one is retrived wrong ��
whith characteres very stranges.
I suppose that the problem is with the encoding, then all day I tried some settings in the class new InputStreamReader.First the encoding UTF-8 because I have created the file using this encoding. Something like this:
in = new InputStreamReader(new GZIPInputStream(localFtp.get(serverFile)),"UTF-8");
but does not work
After I realized that I use the statement localFtp.ascii();
declaring that the content will be downloaded in ascii encoding so
I made this change :
in = new InputStreamReader(new GZIPInputStream(localFtp.get(serverFile)),"US-ASCII");
but still does not work
Please somebody can help me this is very urgent
Here is my code
Tkx
    code:
{code}
import sun.net.ftp.FtpClient;
import java.util.ArrayList;
import java.util.Vector;
import java.io.*;
import java.util.zip.*;
* This is a basic wrapper around the sun.net.ftp.FtpClient
* class, which is an undocumented class which is included
* with Sun Java that allows you to make FTP connections
* and file transfers.
* <p>
* Program version 1.0. Author Julian Robichaux, http://www.nsftools.com
* @author Julian Robichaux ( http://www.nsftools.com )
* @author Jpuerta (modified by)
* @version 1.0
public class SunFtpWrapper extends FtpClient {
     * Methods you might use from the base FtpClient class
     * // set the transfer type to ascii
     * public void ascii()
     * // set the transfer type to binary
     * public void binary()
     *// change to the specified directory
     * public void cd(String remoteDirectory)
     * // download the specified file from the FTP server
     * public TelnetInputStream get(String filename)
import java.io.BufferedInputStream;
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.ArrayList;
import java.util.Vector;
import java.util.ResourceBundle;
import java.util.regex.Pattern;
import java.util.zip.GZIPInputStream;
import org.apache.log4j.Logger;
import org.apache.log4j.PropertyConfigurator;
import com.banesco.lynx.common.SunFtpWrapper;
import com.banesco.lynx.exceptions.FtpManagerException;
import org.apache.log4j.Logger;
import org.apache.log4j.PropertyConfigurator;
public class FtpManager extends SunFtpWrapper{
     ProcessParametersHelper parametersManager=ProcessParametersHelper.newInstance();
     ResourceBundle rb = ResourceBundle.getBundle("com.banesco.lynx.exceptions.lynx_exceptions");
     private Logger logger =null;
     public FtpManager(int i) throws FtpManagerException {
          logger = Logger.getLogger(FtpManager.class);
          PropertyConfigurator.configure(parametersManager.getLog4j_path());
          //0 connect to source server
          //1 connect to destiny server
          if(i==0)
               connectToSourceServer(this);
          else if (i==1)
               connectToDestinyServer(this);
     private void connectToSourceServer(FtpManager ftp)throws FtpManagerException{
          try{
               ftp.openServer(parametersManager.getSourceServerInfo().getIp());
               ftp.login(parametersManager.getSourceServerInfo().getUserName(), parametersManager.getSourceServerInfo                ().getPassword());
          catch (IOException e) {
               //log error
               logger.error("Ha ocurrido un error la descripcion del error es :" + e.getMessage());
               throw new FtpManagerException(Integer.toString(FtpManagerException.CRITICAL),rb.getString                              ("error.ftpmanager.openconnection"));
     private void connectToDestinyServer(FtpManager ftp)throws FtpManagerException{
          try{
               ftp.openServer(parametersManager.getDestinyServerInfo().getIp());
               ftp.login(parametersManager.getDestinyServerInfo().getUserName(), parametersManager.getDestinyServerInfo               ().getPassword());
          catch (IOException e) {
               //log error
               logger.error("Ha ocurrido un error la descripcion del error es :" + e.getMessage());
               throw new FtpManagerException(Integer.toString(FtpManagerException.CRITICAL),rb.getString                              ("error.ftpmanager.openconnection"));
     public ArrayList downloadFileIntoMemory (String path,String serverFile, boolean isZipped) throws FtpManagerException {
          int i = 0;
          InputStreamReader in = null;
          ArrayList response = new ArrayList();
          FtpManager localFtp=null;
          try{
               localFtp=new FtpManager(0);
               localFtp.cd(path);
               //TODO modifico encoding
               // moving file content from ftp server into memory
               if (isZipped)
               { localFtp.binary();
               in = new InputStreamReader(new GZIPInputStream(localFtp.get(serverFile)));
               else
                    localFtp.ascii();
                    in = new InputStreamReader(localFtp.get(serverFile));
               // moving file content from memory into arraylist
               BufferedReader reader = new BufferedReader(in);
               String l = null;
               while ( (l = reader.readLine()) != null)
                    response.add(l);
          catch(IOException e){
               //TODO quitar esto
               e.printStackTrace();
               //log error
               logger.error("Ha ocurrido un error la descripcion del error es :" + e.getMessage());
               throw new FtpManagerException(Integer.toString(FtpManagerException.CRITICAL),rb.getString                    ("error.ftpmanager.downloadfile"));
          catch (FtpManagerException e) {
               //log error
               logger.error("Ha ocurrido un error la descripcion del error es :" + e.getMessage());
               throw new FtpManagerException(Integer.toString(FtpManagerException.CRITICAL),rb.getString                ("error.ftpmanager.downloadfile"));
          finally{
               try{
                    localFtp.disconnect();
               }catch(FtpManagerException e){
                    //log error
                    logger.error("Ha ocurrido un error la descripcion del error es :" + e.getMessage());
                    throw new FtpManagerException(Integer.toString(FtpManagerException.CRITICAL),rb.getString      ("error.ftpmanager.closeconection"));
          return response;

Err.. GZIP files are not text files so why are you trying to read them using Readers?

I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

Queue Blocking and File picked Partially Problem ?

Similar Messages

Maybe you are looking for