Queue Prioritization in R3/ECC

Hi,
We have prioritize PI queues already. In PI it is more of interface specific queue allocation. If we go to sxmb_adm of R3/ECC, again we could see similar options of managing queues. Do we have some simitar concept in R3/ECC too? e.g. if there a lot of messages coming to ECC from a low priority PI message, then is there any possibility of sending these messages to specific queues in ECC?
Kind regards,
Prateek

Okay ;o)
So transfering IDocs via qRFC between systems might be an option for you. But this just guarantees that for example EOIO messages do not overtake one another even during transfer from one system to another.
IDocs are processed in the ECC system via 2 ways. Either "immidiately" when received, or via "background job" which has to be scheduled. Please see you config per inbound message in ECC in WE20.
So I guess the prioritization as you need it will not be provided by message prioritization as configurated in XI.
Kai

Similar Messages

Filter for queue prioritization ...

Hi guys,
I have a question relating to filters for queue prioritization. I have defined filter for large messages (i.e. messages larger than 2048kB should go into XBTL queue). Is it possible to define another one that would say:
"All messages from Sender Name XXXXX larger than 1024kB should be passed into XBTL queue" ?
I know how to create such filters for other queues but XBTL queue is special case.
Do you know how to do it?
Thanks in advance!
Regards
Zbynek

Hi,
Please find the link for "How To prioritize XI messages in queues" below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413.reward me if useful. Let me know if ur issue not resolved.
Thanks,
Ramesh

Problem in queue prioritization

Hi everybody,
He have an Interfase but we can´t see it in queue prioritiaztion and in transaction sxmb_moni.
Does anybody knows why??
Thanks a lot.
Regards

Hi,
>>He have an Interfase but we can´t see it in queue prioritiaztion and in transaction sxmb_moni.
Are saying that you are not able to Configure Filter for Queue Prioritization? or you are not able to see you interface in Configure Sender/Receiver ID
Regards
Suraj

Configuration for Queue Prioritization for EOIO Queues

Hi,
Please can anybody help me in configuring the queue prioritization for EOIO Queues.
Regards
Srinivas

hi,
Check these help..
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Thanks,
Vijaya.

Queue Prioritization with BPM

I am trying to get messages coming into a BPM to use a high priority EOIO queue, without success. I am not really sure I understand why BPM's always use EOIO queues, but I am accepting that and just trying to get a few into a higher priority queue.
The message coming from the adapter always seem to go to an XBQO$PE_WSxxxxxxx queue specific to the adapter. I've made an attempt to set up queue prioritization in SXMSQUEUE, but am really not sure abou the 'message queue' parameter in the in the filter setup.
What value do I need to use here ? Anything I desire to use ? Does it need to match up with a corresponding parameter anywhere else ? No matter what I try they just end up going to XBQO$PE... queue. I do have filters set to influence other steps to go to a high priority EO queue, but can't seem to get a BPM to do so in an EOIO.
Thanks for any help,
Tim

Hi Tim,
Always the queue for a BPM process will be generated with the name XBQ0_WS* where WS* will be the workflow id which you can see thru PFTC_DIS transaction of your ABAP stack...Thats the default design of SAP and all the messages will go in a EOIO manner into this queue and gets assigned into the Process Engine.
There is nothing much we can do explicitly on this queue assignment as we also faced the same issue in case of interfaces with BPM where idocs will be flowing into XI in bulk...
Cheers
JK

Queue Prioritization

Hi Friends,
I have three receivers x, y, z i have done queue prioritization for the z receiver 1st and this Z receiver has to executive first but it is not executing.
Any solution for this?

Hi,
Please verify if you have register the Queues with SMQR then what values set for parameter MAXTIME.
In SMQR, you could monitor the registered queues as well as additional information, for example, the number of messages in each queue or the relative execution time as a percentage.
also refer paramters that have set.
/people/sap.user72/blog/2005/12/12/how-to-prioritize-messages-in-xi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Thanks
Swarup
Edited by: Swarup Sawant on Feb 29, 2008 10:30 AM

Queue Prioritization not working

I have two scenarios coming from ECC which pushes IDOCs to multiple receiver systems. I created a Sender/Receiver ID as follows
Sender Component : ECP
Interface Name : *
Namespace : urn:sap-com:document:sap:idoc:messages
So the above rule covers both scenarios. I have created queue rule to assign messages with size less than 1000KB to assign to high priority queues XBT1* and tested the rule which is working.
Now i see in production, all the messages coming from these two scenarios are assigned in normal queues XBTo.They are not taking the XBT1 queues..
can any one let me know possible error i might have made. We are on PI 7.1 EHP1
Thanks
Guru

I think this is what its happening....
As my scenario is Single Sender and multiple Receivers... The root message is going to be in the inbound queue which is why parent message are getting High priority queues.
All the child messages are going through outbound queues, since the technical routing happens in the outbound queues, thus are having XBTO*
from the sample in my SXMB_MONI production
http://i.imgur.com/JuU0L.png
Atleast from the screen shot this what I guess
If it were single sender and single receiver, I think I would see High priority queues in the SXMB_MONI
Any one has more thought on it

Outbound Queue got deleted during ECC upgrade

Hi,
After ECC EHP6 Upgrade Outbound Queue in SMQ1 got deleted for data source 0F_GL_14 in ECC, but delta queue exists under RSA7.
how to re-generate outbound Queue which got deleted during Upgrade?
Santhosh

Hi Shantosh,
In this case, please follow the below steps -
1. Delete the delta for your info package, and do init without data transfer.
2. After this first fill your setup tables with SBIW tcode,
3. And run your Info Package with Repair full request the data will come to PSA now, anyway ur DSO will overwrite all the existing records and add only the fresh records.
4. Later enable your delta for the Info Package. This will absolutely go fine.
Thanks..!!
Regards,
Harish. K

/SAPAPO/CIF_IRQ_REDUCT_INBOUND queue is found in ecc for sales order ?

Hi all,
i can find this queue "/SAPAPO/CIF_IRQ_REDUCT_INBOUND on outbound queue which is strange and which has caused to stop the standard mcex_update_11_qrfc queue to be stopped!!
Can anyone pls explain me when this queue is been used in the apo and for what purposes and how it gets triggered!!
Thanks

Hi,
but the queue is found in the ecc and it caused to stopped executing the daily extraction queue for sales order?
thanks

Improve queue Prioritization

Dear experts,
we have scenarios with different priority on our SAP PI 7.0 system.
1. Async: File to IDoc (low priority)
2. Async: IDoc to File (high priority)
The scenarios are configured in SXMB_ADM ("Configure Filter for Queue Prioritizazion") and the messages are attached to the correct queues. However, when there are lots of messages in the low priority queue, also high priority messages get delayed. They are still processed much faster than low priority messages, but sometimes there is a delay of some minutes. Please note, that I'm talking about delays in Integration Engine NOT Adapter Engine.
Is it possible to configure a high priority queue, so that messages are always processed directly?
Best regards,
David

Thank you for your answer.
The following queues are configured:
Queue name               Type Mode Max. Runtime Attempts Pause
XBQ1*                     R    D       120         30     300
XBQ9*                     R    D        30         30     300
XBQA*                     R    D       120         30     300
XBQB*                     R    D        60         30     300
XBQI*                     R    D        60         30     300
XBQO*                     R    D        60         30     300
XBQX*                     R    D       120         30     300
XBQY*                     R    D        30         30     300
XBQZ*                     R    D        30         30     300
XBT1*                     R    D       120         30     300
XBT9*                     R    D        30         30     300
XBTA*                     R    D       120         30     300
XBTB*                     R    D        60         30     300
XBTI*                     R    D        60         30     300
XBTJ*                     R    D        60         30     300
XBTL*                     R    D        60         30     300
XBTM*                     R    D        60         30     300
XBTO*                     R    D        60         30     300
XBTX*                     R    D       120         30     300
XBTY*                     R    D        30         30     300
XBTZ*                     R    D        30         30     300
High priority messages get processed with Queue XBTA and low priority with XBTZ.
We increased the polling interval, but we still have the problem, as the files are very big.
Do you have any ideas? Thanks in advance.

Serialization of data in Inbound Proxy

Hi Experts
We have a scenario
SOAP--->XI---->Inbound Proxy(R/3)
The probelm which we are facing is that we have maintained QOS in sender as EOIO and also in XI EOIO
but when the messages goes to target R/3 system the QOS is not maintained and it gives Short Dump.
We have performed Queue Priortiziation on XI
I have few questions in regards with the above:
1)Is Que Priortiziation on R/3 system possible. If yes could someone provide me some doc on help on the same?
2) How to maintain QOS in Inbound Proxy.
3) If QOS is maintained in source system and XI why it is not getting maintained in Target system
Regards
Abhishek Mahajan

Hi Abhishek,
Please have a look at the following links and see if it helps you.
Re: Queue Prioritization in R3/ECC
and
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0179632-5f59-2a10-babe-ae4838435226
Best Regards

Exclusive queue regarding very important message

Hi guru!!
I have one question regarding very important message in exclusive queue for async.
i wanted to find a way which is using exclusive queue for it and then let it use only this queue. anyone does know?
my scenario client java proxy to inbound abap proxy. should be used by exclusive queue for it during sending to receiving, any another message should not use this queue included xi and ecc queue.
can anyone explain me?
thanks & regards;
venjamin

Hi Venjamin,
U may use one queue with ABAP Proxy or a BPM scenario.
This can be done using: Configure Filter for Queue Prioritization in transaction sxmb_adm.
Refer the following
/people/sap.user72/blog/2005/12/12/how-to-prioritize-messages-in-xi
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
Similar problem here
Specific queue for one Scenario.
Regards,
Prateek

Middleware debug problem for BP's from CRM to ECC

I tried few steps to debug BP changes from CRM to ECC but nothing is working ...
I deregistered the Queue thru SMQS, made changes to BP.. went SMQ1 select the Queue name Double Click 2 times.. then select the Tool bar (Debug LUW).. I'm getting "Nothing was selected"
When is see SMW01, BDOC is processed green and data is transferred to ECC.
I want to do debug the BP queue and go to ECC system as some of my custom EEWB fields are not passing to ECC correctly.
Any help is highly appreciated.
Thank you.

Hi,
Put a break point in FM SMW3_MFLOW_UPDATETASKBDOC.
Create a BP and before save type /h to activate debug, mark update debugging option.
When stops in FM SMW3_MFLOW_UPDATETASKBDOC you must be sure to set header-dbgmode = 'X' this will make the bdoc stay stopped in SMW01.
Go to SMW01 and type /h and process the bdoc.
Put a break in FM CRM_UPLOAD_AFTER_MAP_HANDLER and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
Put a break-point in the "CALL TRANSACTION" command. Change the mode of call transaction and you be able to debug XD* update.
Best Regards,
Caíque Escaler

Sync messages should have higher prioritization in IE than async messages

Hi there,
does somebody know how I can assign a higher prioritization to sync messages than to async messages in XI 3.0? In case of a bottleneck on the Integration Engine I want to get sync messages processed first. Message prioritization in SXMB_ADMIN does not work because it's ony applicable for async (EO / EOIO) messages.
Thank you.
BR,
Ralph N.
UPDATE: Since there doesn't seem to be a solution for this issue let me specify it. What kind of installation can be made in the landscape to separate sync messages physically from async messages?
Edited by: Ralph Nitschke on Jun 25, 2010 1:58 PM

hi,
i found some links, hope those helps you
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
http://wiki.sdn.sap.com/wiki/display/XI/DifferencebetweenSXMB_ADMandSXMB_ADMINISTRATION
Queue prioritization
** Queue Prioritization in SXMB_ADM - Tuning Param - Whats the difference
Also try searach in ussing by "queue prioritization" in SDN you will find many links
Thanks
Rodrigo P.
Edited by: Rodrigo Alejandro Pertierra on Jun 25, 2010 10:25 AM

Queue name in Send Step

Hi,
I was looking at an exisiting BPM scenario where a send step has been given with a queue name.
The send step actually sends the idoc to ECC via receiver idoc communication channel,
I was wondering how this process works where giving a queue name in the send step automatically assigns the queue id in the message monitoring as well as in ECC.
I can see that the idoc has been arrived in that particular queue name in ECC.
Please also note that that receiver idoc communication channel queue processing option is not enabled.
Regards
Krish

Hi Raja,
The help documentation just specifies that we can give our queue name and would be delivered in sequence.
My question is whether the queue name specified in send step automatically creates the queues in XI and ECC.
Cos, the interface where I was looking on had the same queue name in ECC using the transaction weinbqueue.
Regards
Krish

Queue Prioritization in R3/ECC

Similar Messages

Maybe you are looking for