QueueBrowser not scaning all messages in JMS queue (ie not showing inprogre

Hi all,
I am using JMS in jboss-3.2.3, when scaning for pending messages i am using QueueBrowser.
But QueueBrowser not scaning all messages in JMS queue (ie not showing inprogress message)
But i need to know all messages including ongoing messages..
Antone plz help me
I am using Queuesender and QueueReceiver ..But some Exception or Error causes my JMS server(QueueReceiver listening for onMessage()) hanged up..and not responding to remaining messages...So i need to find pending messags in JMS queue..How can find?
Now i am using QueueBrowser to get list of pending msgs in queue... But doesn't contains Message which passed for processing (called onMessage())
.. But i need to find this also..How can?
Thanks,
Thilsen

You're right in thinking that the behaviour you describe looks wrong.
Take a look at the QueueBrowser interface which can be used to inspect a queue. You get one using QueueSession.createBrowser(Queue). The QueueBrowser allows you to scan a queue without consuming the messages. However note that the state of the queue may change while you're observing it through the QueueBrowser so what you see might not always be a 100% accurate representation of the queue at any given time.
Other things to check:
- message selectors - are you setting a message selector on your queue receiver which is resulting in not all of the messages 'matching'.
- expired messages - are you setting a time-to-live on the messages that you publish.
Hope this helps,
David Ingham
http://www.arjuna.com

Similar Messages

Weblogic 10.3 Not Removing Expired Messages from JMS Queues

Dear All,
We have an application that is running on Weblogic 10.3.
This application (let us call this application Y) receives messages on a JMS queue. These messages are placed on the queue by another application (let us call this application X). We would like to have these messages expire within a certain amount of time (i.e. 90000 ms) if they are not consumed.
Now when application X places the messages onto the queue for application Y to consume, the JMS producer sets the time to live to 90000 ms. We can see that expiration time has been set appropriately in the weblogic console. If a message sits on the queue for longer than 90000 ms the state string of the message is changed to "receive expired". What we don't understand is why the expired messages still end up being consumed from the queue.
We understand that Weblogic is supposed to have an 'Active Message Expiration' thread that will remove expired messages from the queue. The Expiration Scan Interval for the JMS Server is set to 30 (seconds).
Can anyone tell us why our expired messages don't seem to be deleted from the queues?
Tim

Thank you for the response Rene.
We have set up both the active expiration scan and the message expiration policy. The active expiration scan is set for every 30 seconds. The message expiration policy is set to "discard". However, the expired messages are still being consumed. Is it possible we are doing something wrong? See a portion of our configuration files below.
We have set up the expiration scan time interval. See a portion of our config.xml below:
<jms-server>
<name>brokerJMSServer</name>
<target>AdminServer</target>
<persistent-store xsi:nil="true"></persistent-store>
<store-enabled>true</store-enabled>
<allows-persistent-downgrade>false</allows-persistent-downgrade>
<hosting-temporary-destinations>true</hosting-temporary-destinations>
<temporary-template-resource xsi:nil="true"></temporary-template-resource>
<temporary-template-name xsi:nil="true"></temporary-template-name>
<message-buffer-size>-1</message-buffer-size>
*<expiration-scan-interval>30</expiration-scan-interval>*
<production-paused-at-startup>false</production-paused-at-startup>
<insertion-paused-at-startup>false</insertion-paused-at-startup>
<consumption-paused-at-startup>false</consumption-paused-at-startup>
</jms-server>
<jms-system-resource>
<name>broker-jms</name>
<target>AdminServer</target>
<sub-deployment>
<name>EhrBrokerRequestQueue</name>
<target>brokerJMSServer</target>
</sub-deployment>
<descriptor-file-name>jms/broker-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
We have set up the message expiration policy in our jms descriptor. See a portion below:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://www.bea.com/ns/weblogic/weblogic-jms" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-jms http://www.bea.com/ns/weblogic/weblogic-jms/1.0/weblogic-jms.xsd">
<queue name="EhrBrokerRequestQueue">
<delivery-params-overrides>
<redelivery-delay>-1</redelivery-delay>
</delivery-params-overrides>
<delivery-failure-params>
<redelivery-limit>-1</redelivery-limit>
*<expiration-policy>Discard</expiration-policy>*
</delivery-failure-params>
<jndi-name>EhrBrokerRequestQueue</jndi-name>
</queue>
</weblogic-jms>
What could we be doing wrong?
Kind Regards,
Tim

Unable to insert messages in JMS QUEUE

Hi All,
I am facing an issue while inserting messages in JMS queue.
The JMS Queue is on another weblogic server and now i created a bpel process which has a jms adapter to insert messages inthe jms queue.I am deploying the Bpel in my server which does not have this particular JMS queue.
I am unable to insert the messages into the JMS queue present on another weblogic server. where as i am able to insert messages if the queue is present on my server.
Can you please let me know if its possible to put messages into a queue on remote server from local server.
Thanks in advance.

Most probably it seems like an issue of security. Please try to establish cross domain trust between these two Weblogic server domains. For more information refer to http://download.oracle.com/docs/cd/E1284001/wls/docs103/secmanage/domain.html#wp1175687_

How to read Java Object message from JMS Queue using JMS Adapter .

Dear All,
In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message .
I am able to read the Message successfully thru JMS Adapter but in SXMB_MONI it is not showing any payload .
I also went in Message monitoring but i am getting this type of message in Sender JMS Adapter in Audit Log.
JMS Message ID XXXXX Message Type Null unknown.Payload can not be read and will be empty.
JMS Message ID XXXXX Payload Empty can not read.
Please Help.
Lateef

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Error while sending the messages to JMS Queue

Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
     at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
     at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
     at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
     at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
     at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
     at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
     at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumar

What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

Recieve/Read Messages from JMS Queue through ALSB

Hi,
I have configured JMS Queue in weblogic server.
I have created Messaging Service in ALSB which sends messages in MESSAGE QUEUE.
Now Is it possinle to receive messages from JMS Queue by creating business service in Aqualogic Service bus???

Hi dear,
 
I am sending Message through Serializable Object.
 
I have JMS Proxy which gets invoked when i send message to JMs Queue. JMS Proxy then calls business service.
 
 
Business Service has two functions. One is taking String as input and one is taking Serializable Object as Input.
 
 
public void recieveString(String str) 
public void recieveObject(Trade obj) 
-------------------------------------------------- 
Now I have configured Proxy Services' Request and Response
Message Type as a "TEXT". and I am sending ObjectMessage here so what kind of change I require.
 
I also want to configure my proxy so that if JMS queue recieves TextMessage then it should invoke reciveString() function and if Object Message then vice versa.....
 
But i am not able to handle object even...
When I am sending Object Message it takes as a TextMessage.
I am getting following exception when I am sending Object Message to JMS QUEUE. Request and Response Message types are XML Schema of that object.
 
 
<Nov 30, 2006 4:57:19 PM IST> <Warning> <EJB> <BEA-010065>
 
<MessageDrivenBean threw an Exception in onMessage(). The exception was: java.lang.AssertionError. 
java.lang.AssertionError at com.bea.wli.sb.transports.jms.JmsInboundMDB.onMessage(JmsInboundMDB.j
ava:112)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:42
9)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDL
istener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:
291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4060)
Truncated. see log file for complete stacktrace
>
Message was edited by:
alwaysvaghu

I want to use ODI to read XML messages from JMS queue and then process it..

I want to use oracle ODI (Oracle Data Integrator) to read XML messages from JMS queue and then process it.. i also want to process and validate the data in it....
Could anyone please tell me the steps to achieve the same. I tried some ways which i got on OTN, but not able to implement it exactly...
As i m very new to ODI, it will be great if you provide detailed steps..
Thanks in advance for your help....

Hi,
Were you able to do it? We are facing this same issue now and, despite the fact the docs say otherwise, it does not seem to be a trivial task.
TIA,
Tedi

Posting a message to JMS queue using B2B

Hi,
Could anyone suggest a solution for this scenario?
I have two trading partners say TP1 & TP2. Suppose TP1 is sending an xml message to TP2 using custom ebMS protocol, then at TP2, the message should be posted to a JMS Queue so that some other application can read it and process it.
The problem which I am facing is..
1) where to create that JMS Queue(I could not find any options for creating a JMS Queue neither in B2B console nor in enterprise manager console..!!)?
2) how to register TP2 to send msg to that JMS Queue(How that queue will be vissible to B2B)?
3) Should the endpoint be given as that JMS Queue while configuring the Delivery Channel for TP2?
Thanx in advance for your suggestions,
Regards,
Satya.

Hi Narayanan,
Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
Could you clarify on this?
Regards,
Satya.

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

HT1414 Hi All, i recently done a back up and update & restore, but ive lost my notes, my text messages and my reminders and notes on the calender, i also have lost the data i had in an app which was very important to me. Please Please help me, i,m total

Hi All, i recently done a back up and update & restore, but ive lost my notes, my text messages and my reminders and notes on the calender, i also have lost the data i had in an app which was very important to me. Please Please help me, i,m total novice.
I did this back up because i was instructed by my service provider. This was supposed to sort out my losing connection problem, which it didn't, it instead gave me a new problem. If there is anyone out there who can help me to retrieve my lost information i would appreciate it.
Thank You in advance.

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

New xperia z1- not recieving all messages?

Hi guys
I upgraded from an iPhone 4s to the Xperia z1 on Saturday and am so far loving it. However, I'm not recieving all text messages from people. In order to fix this i tried putting my sim back into my old iPhone, turning off iMessage, leaving the phone for about half an hour then putting the sim back in my Sony. However I'm still not getting all messages. Any ideas...?

Check this thread
http://talk.sonymobile.com/t5/Xperia-Z1/I-ve-just-changed-from-an-I-phone-to-Xperia-z1-cannot-receiv...
or this
http://talk.sonymobile.com/t5/Xperia-Z1/Changed-phone-from-an-Iphone-to-and-Xperia-Z1-and-can-t-rece...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

On my iPad, I was receiving iMessages and had the history of all message that were on my iPhone showing up but I just did a restore and I'm not receiving them. I can send, though. Any ideas?

On my iPad, I was receiving iMessages and had the history of all message that were on my iPhone showing up but I just did a restore and I'm not receiving them. I can send, though. Any ideas?

is there any important stuff saved to your emails? if so you could log on to your emails from a seperate device and back them up. im not sure what else you could do :/

Import is not available all other actions are active but not import help?

Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Deselect: [ ] "Permanent Private Browsing mode"

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??

QueueBrowser not scaning all messages in JMS queue (ie not showing inprogre

Similar Messages

Maybe you are looking for