Queued delta slowing the production R/3 server!!!

Hi,
After we activeted the datasource in LO cockpit, for application 11,12 & 13,
The normal transactions in R/3 have slowed dramatically.
Has anyone encountered this problem ?

Sounds like you might be doing direct delta, where logistics trans are written directly tothe BW delta queue. This method is not recommended for high volume due to it's adverse impact on R3. There are other options queued delta and unserialized V3 which are less of a burden. You might want to do some more reading on logistics delta and verify the method you are using.
One link with a decent writeup on the topic
http://chandranonline.webasyst.net/files/1d168425/ZmlsZT1Nems9

Similar Messages

SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
in the production server.....
while testing the jco maintained for Ess applications.
if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
while maintainig that ping is successfull but getting the above error.
it is the problem with production server.......of E.P
in dev and quality everything is working fine.
plz help me out.
thankyou
swapna

Hi Swapna,
Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Hope it will helps
Regards, Arun Jaiswal

Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
Thanks

Hi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to delete the data in update queue and delta queue for Queued delta?

Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
Raj

Hi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... The product distribution file could not be verified. It may be damaged or was not signed.

Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PM

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

Request not visible in the production import queue

Hi all.
When importing some requests in the QUA system, these requests do not automatically appear in the PRD import queue: they need to be added manually.
This only happens for some request: there are requests which automatically appear in the import queue of the production system.
There is no approval queue used.
I'm looking for the cause of this behaviour, but without success until now.
Can anybody help?
Thanks a lot,
Dino

Hello Dino,
This might happen when the request is originated from a system which is not inside the same transport domain of the target system (QA/PRD).
So if you've DEV > QAS > PRD landscape and you've somehow imported a transport ABCK9xxxx of system ABC into the DEV, then qas then prd, it won't appear automatically in the next target queue, but you've to manually add it.
Regards,
Debasis.

Image server and images in the product catalog(CRM ISA)

Dear Gurus,
I am using CRM ISA 5.0 R/3 version. My products in the product catalog has got images. I have assigned the image's to the products in the R/3 product catalog(WWM2)
In the b2b XCM for the webcatalog node, I need to specify the imageserver url. Can you please tell me what goes here. How do I find out what is my image server in my landscape. Please advice me how do I get the images in my ISA product catalog.
Thanks!
Vivek.

Hi Vivek,
In general image server is the web server. You need to talk to your network administrator to identify and setup the web server. Pass on the below document to your administrator to setup the publishing directories on the web server:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/c7/d64e3c719d1742e10000000a11405a/frameset.htm
<b>Reward if helps</b>
Regards,
Paul Kondaveeti

Locale shown in the wrong language in the production server.

I have an application with a few projects which all have two locales - faroese and english. When I run the application on the default application server on my local machine it works fine with faroese locale but when I deploy to our production server and try to run it from there the faroese locale doesn´t work anymore for one of the projects.
For this project the values which are bound to properties files in my viewcontroller are shown in faroese as they should when the application is run from the production server but those values that are bound to the entity objects and view objects properties files do not work as they should anymore. The english values are shown instead of the faroese so the english property files are reached but the server doesnt seem to be able to figure out that the faroese properties files exist or it for some reason prefers the english locale for this project while it can figure out to show the other projects in faroese So I guess the error is somewhere in my Model project since the faroese locale works for my other projects on the production server but I can´t find out where.
So now I hope someone here has experienced something like and can tell me what I need to do to correct this.

Hi,
I think you hit a problem with upper/lower case names of the resource bundle files (*.properties).
Even windows file system is not case sensitive your file names MUST be exact as resource bundle manager is searching.
This works on embedded AS because the resource bundle files are located directly on the file system.
When you deploy the EAR/WAR file to the external AS then the files are located by the jar/zip finder which is case sensitive!
e.g.: bundlefile_EN.properies is not the same as bundlefile_en.properies
Hope this helps.
regards
Peter

New install of SQL 2014 Std MSDN. Get "The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging."

Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.

Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

FTP folder location is not showing in the production server but exist in the development server.

Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.

When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development

Charm Impact on changing the production server

Hi All,
we currently using Charm for a three system ECC landscape.
Now currently so many changes are there in various stages.
now , the team is planning to change the production server to high availabitlity server.
there will not be any change in the transport route and all, only instead of existing server, the new server details will be added.
I just wanted to know will there be any major impact in the current chagnes.
kindly advice.
Thanks,
Subhashini.

Hi
its like system migration to the new server? or it is by client export?
can you refer the thread [How to replicate Existing running Production server.|How to replicate Existing running Production server.]
and read the note [Note 1395727 - ChaRM project does not work after product version changed|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1395727]
more further on
[Note 1394820 - SMSY: Converting SAP ECC system to SAP ERP system|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001394820&nlang=E]
check and update
jansi

Upgrade from 4 to 5 however experiencing technical faults that I've never seen? At only 1 1/2 month old will apple serve me right by exchanging the product?

Just upgraded to iPhone 5 love the product however not the quality of the handset I have. The iPhone 4 served me well with not one problem throughout. Got 5 and I'm a little disappointed. There is a rattle that sounds as though something in the phone is loose. However my friends do not do this??? The camera when active sometimes has purple lines across the screen as though it malfunctions then quits?? The phone sometimes turns itself off after charge then says its out of battery? When I lock the screen sometimes it will just take screen shots as though the buttons are sticking? I'm now having doubts about the product or is it simply because on demand they were expected faults in some and I've been unlucky? The question is will apple exchange my handset under warranty as its not personal damages and clearly manufactural problems? Ease restore my faith in a much loved brand and product! Karl

The iPhone includes a one year warranty.
Every warranty claim is on a case by case basis and Apple makes the determination if an iPhone is exchanged under warranty if it is determined there is a hardware problem.
Did you transfer the backup for your iPhone 4 to the 5? If so, have you tried restoring the iPhone with iTunes as a new iPhone or not from the backup?
If no change after doing so, call AppleCare or make an appointment at an Apple store if there is one nearby.

Clonning of the EPM Suit from Production to Training Server.

Hi Gurus/experts,
Quick one -
Some xwz Company has already Implemented EPM Suit 11.1.2.1 , HFM,HPM,Essbase modules.
They are having the Production and Test Enviroment of the Hyperion running smoothly.
Now we have been given the contract to do the training where client wants us to take the clone of the
Existing EPM Suit ( Hyperion HFM, HPM , Essbase) and give us the training.
I would like to know whether is there any process where we can do the Clonning of the Oracle EPM Suit
11.1.2.1 from production to Test Server. ?
Currently they are Using
Windows Server 2008 R2 - HFM HPM Essbase
Windows Server 2003 - FDQM
SUN SPARC 64 bit for the Oraacle Database.
Please advise.
Regards
Mohammed Abdul Muqeet

Hello Gurus,
I am eagerly waiting for your response on the above ?
Regards
Mohammed.

Queued delta slowing the production R/3 server!!!

Similar Messages

Maybe you are looking for