SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
in the production server.....
while testing the jco maintained for Ess applications.
if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
while maintainig that ping is successfull but getting the above error.
it is the problem with production server.......of E.P
in dev and quality everything is working fine.
plz help me out.
thankyou
swapna

Hi Swapna,
Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Hope it will helps
Regards, Arun Jaiswal

Similar Messages

FPN error: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

Hi, all.
I am trying to initiate a webdynpro page from the producer to the consume portal via RDL. It works fine for a day. Then it starts giving me the error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page ...
This error cannot be cleared by clearning the FPN cache or synchronize with the producer. Of course, you can also delete the page from the consumer and copy it over from the producer again. It will work. But this is not a good workaround for a production system. We also don't know the cause either. Here is the stack trace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:528)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.portal.fpn.exception.unchecked.FpnUnMarshallingException: Could not find a marshaller for 'com.sapportals.portal.page' from path 'pcd:consumer_content/DEP/portal_content/ca.ottawa.sap.supportcentre/ca.city.ottawa.OttawaRoles/ca.city.ottawa.ManagerInfo/ca.city.ottawa.ManagerInfo-FinanceOnly/ca.city.ottawa.ManagerInfo_MSS_Finance/ca.city.ottawa.Mileage_Parking_Managers'
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:323)
     at com.sap.portal.fpn.entrypoint.RuntimeFederatedPersistance.retrieveDLRemoteState(RuntimeFederatedPersistance.java:103)
     at com.sap.portal.fpn.FpnRuntimeService.bringRemoteState(FpnRuntimeService.java:134)
     at com.sap.portal.fpn.FpnRuntimeService.doFpnLookup(FpnRuntimeService.java:97)
     at com.sap.portal.fpnprovider.fpn.GenericContext.lookup(GenericContext.java:49)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:526)
     ... 31 more
Caused by: com.sap.portal.pcm.OperationFailedException: Creating DL outside the PCD
     at com.sap.portal.pcm.iviewserver.CiViewSLObjectsManager.instantiateDescriptor(CiViewSLObjectsManager.java:687)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:79)
     at com.sap.portal.pcm.page.PagesSrv.instantiateDescriptor(PagesSrv.java:71)
     at com.sap.portal.fpn.marshal.IViewMarshaller.instantiateRelatedItemDescriptor(IViewMarshaller.java:582)
     at com.sap.portal.fpn.marshal.IViewMarshaller.performSemanticActions(IViewMarshaller.java:506)
     at com.sap.portal.fpn.marshal.PageMarshaller.performSemanticActions(PageMarshaller.java:499)
     at com.sap.portal.fpn.marshal.IViewMarshaller.unmarshalResolvedDLChain(IViewMarshaller.java:715)
     at com.sap.portal.fpn.marshal.PageMarshaller.unmarshalResolvedDLChain(PageMarshaller.java:328)
     at com.sap.portal.fpn.marshal.ContentMarshallerService.unMarshallDLChain(ContentMarshallerService.java:320)
     ... 38 more
So far I found nothing on OSS or SDN on this FpnUnMarshallingException. Has anyone seen this error before?
Thanks.
Jonathan.
Edited by: Jonathan Ma on Apr 23, 2009 12:25 AM

Hi Jonathan,
you may deactivate the GPN cache as well as the old navigation cache. About the GPN there is note 1172433. Both caches are not used in FPN scenario and can lead to such strange problems. If this won't help please open a support message for this that we can analyse further.
Cheers,
Anja

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

Com.sap.caf.mp.base.exception.EngineException: Problem in server response:

Hi,
I have created one CAF application,which is having one external webservice and one application service.Webservice takes two input parameters(string,boolean) and it returns an arraylist.
So when i test the CAF application on the CAF service browser it is giving me error like " com.sap.caf.mp.base.exception.EngineException: Problem in server response: [Bad Request]."
I am getting this error while creating object of web service.
Can anybody help me on this issue..
Thanks in Advance

It looks like you are not authorized to execute the webservice. Check the webservice authentication settings.
Peter

Synchronizing Disaster Recovery site with the production server

Hi All,
One of the customer is asking the following query:
"How Disaster recovery site can be synchronized with the production server and how do they switch? Will the web logic server do this for them?"
This customer is having two sites one live and one a DR (Disaster Recovery) site on different location.
Can somebody answer my query?
Thanks in advance.,
Regards.,
Naveen

Firstly
Is your Datagaurd Physical( Redo Apply) or Logical( SQL apply)?
Does it have Datagaurd Broker?
When Datagaurd is setup in your environment - on the primary database( live database) the Datagaurd users LGWR or/and ARCH process to collect redo data and ship this data to standby ( DR site) and the FAL process to provide client-server mechanism for shipping archived logs to standby.
On standby database, The Datagaurd users RFS process to receive redo records from primary database, the MRP process applies redo information to standby database.
If the Data Gaurd Broker is enabled, Datagaurd also used DMON process to manage and monitor both primary and standby databases as a unified configuration.
When there is any connectivity issue to the standby and when connection is re-established, the accumulated archive logs are automatically shipped and apploed to stanby, until stanby is resynchronized with the primary. This process does not require any administrative intervention.
If there is a very large Archive Gap between the primary and secondary due to some major issue. Then the unshipped archive logs need to be shipped manually from primary to standby and needs to be applied in standby to sync up with primary. For some reason there will also arise rare issues like problem with not applying of archive logs though log shipping is success. So some work arround will solve it.
Comming to planned /unplanned outages of production site.
Datagaurd has Failover and Switchover( planned ) methods, These are not automatic, but have to be explicitly initiated by the administrator( So there will be downtime but minimal). Once initiated, Datagaurd automates the processes involved.
- S K A
Edited by: user12297346 on Jan 27, 2010 7:13 AM

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

File does not Upload ! Error in the listener class com.sap.ip.portal...

Hello.
Recently, I Add a New Server Node on Java Central Instance.
And Java Program Upload on Portal, then following error occured.
Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of
handleTopic
Original server node can upload successfully.
But, An error happens in New Additional node.
Please tell me way to resolve the error.
Regards.
Edited by: Masashi Fujita on Dec 24, 2008 5:29 AM
Edited by: Masashi Fujita on Dec 25, 2008 7:20 AM

Hi Masashi Fujita,
Check this Link for Uploading and Downloading files using Web Dynpro Java.
[Uploading and Downloading Files in Web Dynpro Java|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71]
[Upload Files Using Web Service in Web Dynpro Java Application|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0d9336b-b4cf-2910-bdbf-b00d89bd2929]
[Uploading and Downloading Files in Web Dynpro Tables|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f]
Thanks & Regards,
Sharma Kvbk.

FTP folder location is not showing in the production server but exist in the development server.

Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.

When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development

Charm Impact on changing the production server

Hi All,
we currently using Charm for a three system ECC landscape.
Now currently so many changes are there in various stages.
now , the team is planning to change the production server to high availabitlity server.
there will not be any change in the transport route and all, only instead of existing server, the new server details will be added.
I just wanted to know will there be any major impact in the current chagnes.
kindly advice.
Thanks,
Subhashini.

Hi
its like system migration to the new server? or it is by client export?
can you refer the thread [How to replicate Existing running Production server.|How to replicate Existing running Production server.]
and read the note [Note 1395727 - ChaRM project does not work after product version changed|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1395727]
more further on
[Note 1394820 - SMSY: Converting SAP ECC system to SAP ERP system|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001394820&nlang=E]
check and update
jansi

Locale shown in the wrong language in the production server.

I have an application with a few projects which all have two locales - faroese and english. When I run the application on the default application server on my local machine it works fine with faroese locale but when I deploy to our production server and try to run it from there the faroese locale doesn´t work anymore for one of the projects.
For this project the values which are bound to properties files in my viewcontroller are shown in faroese as they should when the application is run from the production server but those values that are bound to the entity objects and view objects properties files do not work as they should anymore. The english values are shown instead of the faroese so the english property files are reached but the server doesnt seem to be able to figure out that the faroese properties files exist or it for some reason prefers the english locale for this project while it can figure out to show the other projects in faroese So I guess the error is somewhere in my Model project since the faroese locale works for my other projects on the production server but I can´t find out where.
So now I hope someone here has experienced something like and can tell me what I need to do to correct this.

Hi,
I think you hit a problem with upper/lower case names of the resource bundle files (*.properties).
Even windows file system is not case sensitive your file names MUST be exact as resource bundle manager is searching.
This works on embedded AS because the resource bundle files are located directly on the file system.
When you deploy the EAR/WAR file to the external AS then the files are located by the jar/zip finder which is case sensitive!
e.g.: bundlefile_EN.properies is not the same as bundlefile_en.properies
Hope this helps.
regards
Peter

This Cmpilation unit indirectly refers to the missing type com.sap.se......

Hi,
Here is the complete scenario..
I have copied a DC from another one and I am trying to compile the same.
Now I am getting an error :
"This compliation unit refers to the missing type com.sap.security.api.IUser(typically some required classfile is referencing a type outside the classpath).
Now to resolve this I have added com.sap.security.api.jar to my project but the error is still there.
Please suggest a solution to the problem.
Regards,
Amiya Shrivastava

Hi
How did you added the jar file?
If you added from the properties and Java buildpath it will not work for DCs.
You have to create a library project DC and it it in Used DCs.
Regards
Abhimanyu L
Message was edited by:
Abhimanyu Lagishetti

About the communication issues in the client-server program

About the communication issues in the client-server program
Hi, I have some questions about the communication issues in a java project, which is basically the client and server architecture. In brief, the client, written in java, can be deployed anywhere, and in the following part, assume it is in the LAN (Local Area Network) which is connnected to the internet through the firewall and/or proxy, and the server, written in
java too, simply provides the listening service on a port in a remote machine. And assume the server is connected to the internet directly so that the scenario can be simple to focus on the core questions.
My questions are as follows:
1 About the relationship between the communication port and protocol
Generally, protocols at the application level like HTTP, FTP have their own default port, e.g., HTTP is corresponding to 80,
FTP is to 25. But it is NOT necessary for the web server to provide the HTTP listening service at port 80, right? E.g, Tomcat provides the HTTP listening service at 8080. So it means the default relationship between the application protocl and their port is some routine, which is not necessary to follow, right?
2 Assume a LAN connected to the internet through a proxy, which only allows HTTP protocol, then questions are:
2.1 Does the proxy recognize the HTTP request from the client by the port number (carried in the request string)? For example, when the server provides the HTTP listening service at 80, then the request from the client will include the port number 80, then the proxy will parse such info and decide if or not the request can be out.
2.2 Does the proxy recognize the HTTP request from the client by protocol (carried in the request string)? For example, the protocol used in the communicatin should be included in the request, then the proxy can parse it to make the decision.
3 In java programm, if using the HTTP protcol, then on the client: the corresponding API is java.net.URLConnection, right?
If using the TCP protocol directly, then on the client:the corresponding API is java.net.Socket, right? In both cases, the server side use the same API, java.net.ServerSocket?
Is it correct to say that the communication by Socket is faster than URLConnection?
4 Take MSN messenger for example, which protocol does it use? Since proxy configure is only the possible option, so I guess generally the TCP protocol is used directly so that the better perfomrance can be achieved, right?
5 Given 3 computers within the same LAN, can the client, proxy, server environment above be correctly simulated? If so, can
you recommend me some typical proxy program so that I can install it to configure such an enviroment to perform some test?
6 I guess there should be some software to find out which port number a given program/process is going through to connect to
the remote machine, and which port number a given program/process is listening on? Also, what protocl is used in the given
communication.
7 Finally, regarding each of the above questions, it will be highly appreciated that if you can recommed some references,
tutorials, books etc. In summary, what I care about is how to enable the java client behind the proxy and firewall to
communicate with the remote server without problems, so if you know some good tutorials plz let me know and thx in advance!
Finally, thanks for your attention so such long questions =).

FTP is to 25. But it is NOT necessary for the web
server to provide the HTTP listening service at port
80, right? E.g, Tomcat provides the HTTP listening
service at 8080. So it means the default relationship
between the application protocl and their port is
some routine, which is not necessary to follow,
right?Not sure what you're saying here.
There must be a server listening on some port. The client must know what port that is. If you open the connection using the Socket class, you'll explicitly specify the port. If you use some higher level class like URLConnection or something in the commons Net package, there's probably a default port that will be used if you don't explicitly specify another.
There's no way for the client to know that the HTTP request will go to port 80 instead of port 8080. If you think the the client contacts the server without explicitly naming a port, and then asks the server "get me your HTTP server", and the port is determined from that, you're mistaken.
Not sure if you're thinking that, but it sounded like you might be.
2 Assume a LAN connected to the internet through
a proxy, which only allows HTTP protocol, then
questions are:
2.1 Does the proxy recognize the HTTP request
from the client by the port number (carried in the
request string)? For example, when the server
provides the HTTP listening service at 80, then the
request from the client will include the port number
80, then the proxy will parse such info and decide if
or not the request can be out. I'm not sure, but I think most proxies and firewalls are configured by ports. I thought I'd heard of more sophisticated, higher-level ones that could understand the content to some degree, but I don't know anything about those.
3 In java programm, if using the HTTP protcol,
then on the client: the corresponding API is
java.net.URLConnection, right?That's one way.
You might want to look into this:
http://jakarta.apache.org/commons/httpclient/
If using the TCP protocol directly, then on the
client:the corresponding API is java.net.Socket,
right? In both cases, the server side use the same
API, java.net.ServerSocket? A Java client will user Socket, and a Java server will use ServerSocket and Socket.
Is it correct to say that the communication by Socket
is faster than URLConnection?Probably not.

Com.sap.engine.services.dbpool.exceptions.BaseResourceException:

Hi
Jcontrol.exe is stopped. I checked in server0 log file.
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection:
Caused by: com.ibm.db2.jcc.b.DisconnectException: [ibm][db2][jcc][t4][2043][11550] Exception java.net.ConnectException: Error opening socket to server
Caused by: java.net.ConnectException: Connection refused: connectCommunication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error
com.sap.caf.eu.gp.mail.cf.core.exceptionhandling.MailCFExceptionHandler.throwMailCFRuntimeException(MailCFExceptionHandler.java:92)
#1.5 #0022198E9491001F000000130000390C00046999A2B0692D#1242008487314#com.sap.jms##com.sap.jms####n/a##6e72d7203dd211decd7d0022198e9491#SAPEngine_System_Thread[impl:5]_90##0#0#Error#1#/System/Server#Plain#JMSServerContainer.onServiceJoin##Configuration problem occurred while accessing JMS configuration resources.#
#1.5 #0022198E9491008E000000010000390C00046999A5B43D17#1242008537907#com.sap.sql.jdbc.direct.DirectPreparedStatement##com.sap.sql.jdbc.direct.DirectPreparedStatement#Guest#0##n/a##8c9ab8303dd211de99680022198e9491#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Database/sql/jdbc/direct#Java#com.sap.sql_0003##SQL error occurred on connection apsgdc01hwebd:BPE:SAPBPEDB: code=-4,499, state="null", message="[ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error";
SQL statement is "SELECT "RESEND_INFO_UUID","SENT_MAIL_UUID","RI_START_TIME","RI_DELAY" FROM "CAF_GP_RESEND_INFO" ORDER BY 4".
[EXCEPTION]
#6#-4499#<null>#[ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error#apsgdc01hwebd:BPE:SAPBPEDB#SELECT "RESEND_INFO_UUID","SENT_MAIL_UUID","RI_START_TIME","RI_DELAY" FROM "CAF_GP_RESEND_INFO" ORDER BY 4#com.ibm.db2.jcc.b.DisconnectException: [ibm][db2][jcc][t4][2030][11211] A communication error has been detected. Communication protocol being used: TCP/IP.
Communication API being used: SOCKETS. Location where the error was detected: T4Agent.sendRequest().
Communication function detecting the error: OutputStream.flush(). Protocol specific error codes Software caused connection abort: socket write error, *, 0. Message: Software caused connection abort: socket write error
Regards
Rao

Hi, Please let me know if you managed to solve the problem.. We are facing the same issue
Regards
PN

Com.sap.tc.webdynpro.services.exceptions.WDRuntimeException

Hi All Experts,
In Employee Self Service i am Getting this Error,overview page is also not displayed.
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
... 60 more
Regards
Anumit

I have seen this funny error message crop up time and again. Though only for particulaer set of users only.
When developing cuetom applications you will have to do register the BLC compeonent as mentioned in the documentation below. If you dont register you are sure to get this error
http://help.sap.com/erp2005_ehp_04/helpdata/en/43/42b7eb8eba2a21e10000000a422035/content.htm
You should not get this error for standard applications as the BLC is always registerd as mentioned in the above documentaion
But when ever I got this error for standard applications, restarting the browser of the end users or in extreme cases the portal server resolved this issue. Fortunately I never got this error in production

Com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of vi

I am getting the following exception when I trying to go to Details view from my results view.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of view controller ResultsView does not exist.
     at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:356)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:832)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:763)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.initEvents(AbstractClient.java:131)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.prepareTasks(AbstractClient.java:99)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:250)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
To explain further, I have 3 views in my webdynpro project, list view, results view and detail view that is embedded in the same window.
In the list view, I have a table of materials with linktoaction event that when clicked will go to detail material view to display material information. In this scenario this is working with no problems for all the items in the list.
When I do the same thing from the result view as the list view, only the first url link action works to display the detail view , the others fail with the above exception.
Any help on resolving this issue is appreciated.
Thanks,
Sunitha.

Ayyapparaj,
The lifespan of ResultsView is "FrameworkControlled".
Following is the code snippet for onclick of a row in the table in the results view,
     IWDMessageManager messageMgr =     wdThis.wdGetAPI().getComponent().getMessageManager();
//     getting the user's assigned SoldTo from the UME profile
      String[] customer = null;
      String SoldTo = null;
      try
                IUser user = WDClientUser.getLoggedInClientUser().getSAPUser();
                IUserAccount[] acct = user.getUserAccounts();
                customer = user.getAttribute(AvailabilityApp.NAMESPACE_LENNOX,AvailabilityApp.ATTR_SOLDTO);
                SoldTo = customer[0];
           } catch (UMException e)
                     // TODO Auto-generated catch block
                     messageMgr.reportException(e.getMessage(),false);
     //create the instance and pass parameters for RFC Z_RFC_HRP_MATERIAL_INFO_Input
     Z_Rfc_Hrp_Material_Info_Input input = new Z_Rfc_Hrp_Material_Info_Input();
     wdContext.nodeZ_Rfc_Hrp_Material_Info_Input().bind(input);
    input.setMatnr(wdContext.currentATP_To_AtpElement().getMatnr().toUpperCase());
    input.setUser_Id(SoldTo);
     //executing the RFC Z_Rfc_Wwhc_Zatp
     wdThis.wdGetAvailabilityAppController().ExecuteZ_RFC_HRP_MATERIAL_INFO();
     wdContext.currentContextElement().setReturnTextDisplay("Availability Results");
     wdThis.wdFirePlugToDetailView();
When it goes to Detail view and try to display the UI bound to the output from the above
Z_RFC_HRP_MATERIAL_INFO() , it shows this error.
Please note that the above code does not fail for the first row of the results table in the results view, but it does for all the others. Is there something that I am missing here ?
Thanks,
Sunitha.

SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

Similar Messages

Maybe you are looking for