Quick assistance needed: project corrupted!

This happened after I added ejb anotations on classes files within predefined web project. Now I can not go to the Project Content from project properties dialog and error message is java.lang.IllegalArgumentException: The content folder is not under the specified source root.
Help please.

I have the same error. Allthough I haven't added any ejb annotations, so it has nothing to do with that. However the result is the same, a corrupted projet. Any suggestions? Here is the stack trace i get:
java.lang.IllegalArgumentException: The content folder is not under the specified source root.
at oracle.jdeveloper.model.ContentFolder.<init>(ContentFolder.java:123)
at oracle.jdeveloper.model.ContentSetPanel.populateContentList(ContentSetPanel.java:359)
at oracle.jdeveloper.model.ContentSetPanel.loadFrom(ContentSetPanel.java:157)
at oracle.jdeveloper.model.JProjectPanel.loadFrom(JProjectPanel.java:211)
at oracle.jdeveloper.model.JProjectPanel.onProjectPanelEntry(JProjectPanel.java:123)
at oracle.ide.model.panels.ProjectSettingsTraversablePanel.onEntry(ProjectSettingsTraversablePanel.java:87)
at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java)
at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
at javax.swing.Timer.fireActionPerformed(Timer.java:271)
at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:515)
at java.awt.Dialog.show(Dialog.java:536)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:223)
at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:89)
at oracle.ide.model.panels.ProjectPropertiesDialog.showDialog(ProjectPropertiesDialog.java:80)
at oracle.jdeveloper.model.JProjectStructureController.handleEvent(JProjectStructureController.java:111)
at oracle.jdeveloper.model.JProjectStructureController$JProjectMenuListener.handleDefaultAction(JProjectStructureController.java:576)
at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:343)
at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1504)
at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:1841)
at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:1862)
at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:176)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Similar Messages

Need Some Quick Assistance with Project Settings

Hi,
I'm doing a project that needs to be played back on and HD television set and am creating all the graphics and text myself. I have set the project settings to HD 720p, but am wondering if I should do an output to HD Broadcast 1080i60 (1920x1080).
Also, since I started the project in HD 720p (1280x720) is there a way to switch the project settings to HD Broadcast 1080i60 while in the middle of the project.
Any quick assistance would be greatly appreciated!
Thanks,

hi,
don't know what project settings you should use, other than to do the biggest baddest quality your machine can handle. You can always down rez later, you cant up rez ( well you dont gain the extra quality)
however you can change the project settings by clicking on Project Properties in the edit menu. There you will find pop menus to allow you to change the settings. or you could opena new project and cut and paste layers between the two.
hth
adam

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

Hi there,
Use the method described in the link below to get back up and running:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Adobe Download Assistant file is corrupted.

Trying to get a trial subscription of Acrobat XI but the Adobe Download Assistant file is corrupted.
Re-download does not help.

Hi ahender,
You can download Acrobat XI from this Link : https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Please let me know if you face any challenges.
Regards,
Rahul Tyagi

I need Project Systems(PS) documentation

Dear Consultants,
I need Project Systems(PS) documentation.
I would really appriciate if any one help me out in getting PS material.
my email id is [email protected]

Useful URL's for SAP PS ducumentation
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PS/PS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCPS/CAARCPS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_PS.pdf
I personally dont think you would require more documentation apart from this.
Still if any specific information is required please contact here (as a reply to this thread).
Please also reward points if you found this information useful.
Regards,
Pradyumna

After upgrading my i tuns i cant open says quick time needs to be 7.5.5 or more wth

after upgrading my i tuns i cant open says quick time needs to be 7.5.5 or more wth

Hello amyluvscarolyn
Depending on what version of Mac OS X you are running, you may have a newer version. If you are needing QuickTime 7, then check out the article below for the correct links to download for your system.
Installing QuickTime Player 7
http://support.apple.com/kb/HT3678
Regards,
-Norm G.

Export HD project from CS4 - assistance needed!

I could use some advice working my way out of what feels like a sticky situation. Partially because I'm not extremely experienced with video production (espcially exporting), but also because I was a punk and broke that cardinal rule of not switching to HD before you know what you are doing. And thus my cousin's wedidng video has taken longer to edit and export to author a DVD than planned...
It is a big mess to unravel, so if anyone can offer any advice, I would appreciate it.
I have everything edited through Premiere in CS4. Trouble is I cannot figure out how to export the footage in such a way that 1) fills a widescreen tv all the way and 2) is actually the high quality I'm expecting.
Some detail:
1) I export into a widescreen format (my preferred export setting is H.264) but when playing the DVD on a widescreen TV, it plays as widescreen, but there is a nice large black border surrounding the entire image - it just doesn't fill up the entire screen. On a non-widescreen TV it doesn't look properly letterboxed and looks extremely close to a 4:3 ratio.You can see the difference between the widescreen letterboxed DVD menu, and the much thinner black 'letterboxing' of the wedding video. How can I fix this?
2)
The quality just isn't HD like I was expecting, and like it looks like when editing in Premiere. In fact, sometimes it doesn't even seem as good as SD quality, especially when there is motion in the frame and when tracking movement. I filmed with two different cameras I had borrowed from various folks. One camera shot in 1440x1080, and one shot in 1920x1080. I didn't know this till I was pulling the footage in for editing. I don't know if this has anything to do with the quality on export - both look about the same in Premiere when editing. When watching the exported video, it does not handle any motion in the frame well at all - blurred motion is all over the place. It doesn't do this in Premiere. I'm wondering if it is because I should deinterlace the footage? I don't know if my camera recorded in 1080i or 1080p (and have no clue how to figure this out). Or, should I try to turn the 1440 footage into square pixels to correct the aspect ratio?
I've read some forum posts, and am wondering if the problem is that CS4 can't export HD footage for standard def. DVDs. I figured if the file size ended up being small enough to fit on a standard DVD, it would work just fine. I've exported. Perhaps this is the problem with the film quality? In which case, what suggestions are there for how to export?
Essentially, I could use any suggestions about how to export this footage in a format that will play on either widescreen or standard aspect ratio (I'm game for whatever will provide the best quality picture at this point, even if I lose the sides of my footage converting to 4:3). Or, is it that I need to make some changes before even going to export?
Thanks for your thoughts. And yes, I am so incredibly, fully aware of the folly of moving to a format I know aboslutely zilch about. I actually had that thought when I was preparing to film the wedding and though - meh, I've had no real trouble before with any of my video projects, I've got to try HD someday! UHG!
Thank you,
Heather

I filmed with two different cameras I had borrowed from various folks. One camera shot in 1440x1080, and one shot in 1920x1080
That is not the end of the world. Set up an AVCHD sequence (1920x1080 50i for Europe, 60i for USA and non-anamorphic) and drop the footage into that. 1440x1080 will adjust itself.
If you want best quality export your timeline to BluRay (you need a BD burner) Forget about HD on DVD.
If you do not want BluRay you have to settle for less quality on DVD. (H.264 is not an option for making a DVD)
See export settings:
Once exported load the two files (one for audio and one for video) into Encore, author and burn.

Unlock iPhoto Assistance Needed:, Unlock iPhoto Assistance Needed:

OS X Version 10.8. I just updated the iPhoto on August 14, 2012, and I store my iPhoto on an external 3 TB Drive. I also purchased and downloaded iPhoto Manager on August 14, 2012 which did allow me to export two additional iPhoto Libraries into the newly update one. After all the updates were complete and images showing correctly, I felt safe enough to download the camera's memory card holding 500 additional photos and once they were downloaded I deleted them from the card. I went to shut down the iPhoto Library a couple different ways and it started to automatically "Update Library". After 15 minutes I realized it had stalled out at 65% completion. I then went to the Utility Manger and Forced Quit the iPhoto. When attempting to reopen I received the following message "the iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it". I'm obviously concerned my latest dowload of 500 photos are not stored/saved correctly, and I deleted them from the card but even more concerned I may not be able to access any of my prior photos if I cannot unlock this program. How did it get locked? Should I be afraid to unplug my external or turn my computer off before this problem is resolved? Any and all help will be much appreciated, especially if it's given in the most elementary terms possible. Although I've had my mac for almost two years now, I generally find myself using the Windows system which I had to install to run my business. Therefore I do not know more than 5% of the tricks, shortcuts, and most definitely lingo of Mac to efficiently navigate to a better place.
Sincerely,
06Deuce

LN,
Thank you very much for your quick response! I understand your first two paragraphs, however I have questions on the third and pretty much over my head on the fourth unfortunately.
Paragraph 3 regarding the download of Fresh Crop, is it certain my 500 recently downloaded new photos are not saved into iPhoto because the update didn't complete? Should I wait until I get iPhoto back opened up to confirm they are not there, or are they pretty much gone so move forward with this purchase?
Paragraph 4
I do not know what you mean by "rebuild the library". I had assistance last night exporting two additional libraries into the updated Library with iPhoto Manager and that took an overnight process of updating. Are you saying I need to repeat this process?
Sincerely,
06Deuce

Play iMovie on TV/Xbox/Flash Drive... Quick reply needed!!!!

Once again I appeal to the great and good of this community for assistance...
So I have just completed a big project on iMovie (1 Hour 38Mintues in length).. This project is actually for a relative so now I need to put it in a playable format for them to watch. Ideally I need it to be in the best possible resolution (720 or 1080) although it is a slide show rather than video footage. So I have completed the project and need to give the final version to my relative. My first question is HOW???? I have saved it to a Flash Drive but when I place this into a PC/Smart TV there is nothing there. When I plug it into my Mac though it shows that the file is there (.mp4 format).
In short all I want to be able to do is put my final project onto a Flash drive to give to my relative who can then in turn plug it into a smart tv/Xbox/DVD player USB port and watch the project. Is this even possible? if not then why? and what are my alternatives? If anyone out there can help me out then a speedy response would be greatly appreciated.
Come on folks, you havent let me down yet!
Mark

MvDarby wrote:
... There must be a simple way to do to otherwise I would argue that this is a major downfall to iMovie which is a shame. Any other suggestions?..
um, well, the limitations of an Xbox (not reading an Microsoft-format as exFat!) are not really iMovie nor Apple related, are they?
1) narrow failure: check with a different stick - I'm surprised, two diff. devices, PS3 and Xbox don't recognize the stick at all ....
2) 16GBs??? In what format do you export? Settings for e.g. AppleTV don't create files beyond 2-3GBs/h ... Again, follow advice mentioned in the User Tipp I linked to above...
3) split export. If you cannot reduce the file to a Sony or Windows reasonable size, you have to split your project into 'parts' to keep chunks <4GBs. But, check #1 and #2 first ...

Constant project corruption

Hey everyone,
Lately my projects are becoming constantly corrupted in iMovie and I have no idea why. I am having to keep a backup every ten minutes because adding a new clip, transition, anything, can cause the project to become uneditable and unexportable, and cannot be previewed (black screen). I am doing this for my job so it's causing me a lot of issues. Any ideas why this keeps happening?

Yes. If you have more than one version of iMovie installed, you need to see if the newer one is designated by number. Sometimes it will show as: com.apple.imovie7.plist
If you accidentally trash the wrong one it is ok. That application will just create a new one when you reopen it.
In the early days of computers, preference files were always getting corrupted and trashing them was something done quite often.
Post back if doing so does not help your situation.

IMovie project corrupt after crash?

I have a problem with a seemingly corrupt iMovie project
I have been working on a holiday movie for over 12 hours
Today, my macbook pro crashed while editing the project
Aftwards I was unable to load the project.
Other, older projects can still be loaded with iMovie.
I suspect the project has been corrupted due to the crash.
I don't have any back-ups (Time Machine is not activated)
Are there any other ways to fix the corrupted file or is it permanently damaged and won't I be able to open it again?
Thanks for your help and insights!

I'm new to iMovie, and to the Mac, and for years I have heard about how wonderful the Mac is. While it doesn't have the same problems as a PC it has plenty of its own problems.
I just spent 20 straight hours putting together a movie in iMovie. As I clicked to make my very last tweak to my project, iMovie crashed.
I tried to get a hold of Apple support but their system doesn't allow access to an actual human being. Their system make you go through a series of steps to "arrange for a phone call from Apple". That system fails EVERY TIME. I get to the end and a messages pops up saying that they can't help with my problem at this time, try again. I've had a Mac for three months now and their support system fails every, single time.
So, on to the problem at hand. As I read the various forums about iMovie it has struck me as rather odd that no one seems to have a problem with the engineers at Apple creating a software package that does not allow you to save your work. Now, it took me all of a nano second to realize the likely out come of such stupidity. And, on my very first big project my prediction came true. iMovie crashed as I finished my project and destroying all of my work.
So my first question is, how could the engineers at Apple possibly justify not including a "save" and "save as" function to iMovie? The absurdity of this reaches new heights. This has disaster written all over it. And it appears that many people are having the same problems.
Secondly: I've read messages from people who seem to think that not having a "save" or "save as" function was a brilliant stroke of genius. OK, so this question goes out to those people. If it is so brilliant then please explain to me how I can recover my last twenty hours of work? If there had been a "save" function I would have been saving my project all along the way and I would only have lost the last half an hour or so and not the entire 20 hours.
So, tell me. Precisely. Step-by-step. How do I recover my work.

Help needed deleting corrupted file

G'day,
I have a corrupted file on my hard disk. It is a Vault backup file created by Aperture. Whenever I do anything with the file (e.g., try to unlock it, try to view info, try to open it), the o/s immediately tells me that I have to manually turn off the system (which is what I understand to be a kernel panic).
I have tried to delete the file using the terminal window and by placing the file into a folder and moving the folder to trash. In all cases, I'm told to manually shut down the computer (even when I tried to empty the trash).
It's a 30 gig file, so I'd like to be able to delete it in order to save the hard disk space. Does anyone have any suggestions? I'll reformat the drive if I have to, but I'd prefer to remove just the file.
Thanks for your help.
Regards,
Doug

Sometimes it happens that the Finder just doesn't want to empty the trash anymore and says "The operation cannot be completed because the item "" is in use.". That's a good warning if it is true, but sometimes you want to get rid of an application and this warning appears even though the only thing running is the Finder. Usually after a restart you can delete it. But that is very time consuming and even then, it is sometimes still stuck not wanting to be deleted. There is a risky command that can be used in the Terminal that will empty the trash no matter what. Risky because a simple error in the syntax could erase a lot of stuff that you want to keep.
There is a much easier and quicker way of forcing the Finder to empty the trash no matter what! It is done in the freeware customization and maintenance application OnyX (download @ http://www.titanium.free.fr/pgs/english.html ). Once you loaded OnyX and entered your administrator password, choose "Cleaning" in the top bar. Click on the "Trash" tab. You can now choose whether you want to "Delete" or to "Securely Delete" (by overwriting) and click Execute. That's it, it will force the Finder to empty the trash even if the files are in use!
Also look at these links.
Solving Trash Problems
http://www.thexlab.com/faqs/trash.html
How To Fix Stubborn Trash and Why it Won't Delete
http://www.osxfaq.com/Tutorials/LearningCenter/HowTo/Trash/index.ws
 Cheers, Tom

Some assistance needed on getting data off of a Time Machine backup

To make this short, I had a major HD failure on an older external Lacie drive that I used as storage for all kinds of things. I had that drive backed up, along with everything else, onto another Lacie external drive. Coincidentally, after the storage drive failed, so did my newer Lacie drive used for backup, BUT it is assumed that this one if just a bad power supply. A new one should be here today so we'll see if it will spin up.
While waiting on the PS to arrive, I've decided to change backup strategy a bit and purchased a RAID array set up as RAID1. At least this way a drive failure won't screw me. I know, I still need to be careful since the drives are mirror's of each other so if the data is corrupted...anyway.
The RAID is up and running and Time Machine is working flawlessly (for now) on it. Once I get the PS for my other drive and providing it spins up, I need to pull data off of the old Time Machine backup in that drive, specifically for the storage drive. I know that on the TM drive there is a directory for that storage drive, but what I don't know is if I can just copy the latest dated directory for that drive and I'll get all the data or am I going to have to go through Time Machine to get at.
And that is the other problem. I don't think TM will give me access to that drives data since the drive is no longer connected to my system. I'm hoping I'm wrong on that and that there is a simple solution to get at the data.
So help if you can and keep your fingers crossed that the drive will spin up!
Anthony

WOW. After letting DW do it's thing and failing to be able to write a new directory, it WAS able to create one and use it create a preview of the the drive. It said the drive was damaged and the new directory couldn't be written.
Well, the preview seems to have worked OK and I was able to copy the data from my old "storage" drive to a new folder on my new backup drive. That took an incredibly long time, but it looks like all 67GB of data is intact. I'm currently writing zeros to the old drive after repartitioning it. That should take care of the volume structure problem, but certainly doesn't make me feel all warm and fuzzy about the drive stability.
And all this leaves me with another question. What the heck caused the volume structure to get completely hosed at the same time the other drive failed totally? Since TM was backing up the "storage" drive to this one, could the failure have caused something to get majorly messed up on the TM drive?
Or, could the TM drive failure been caused by all these darn TM errors that keep popping up for no rhyme or reason? And oh yeah, the errors are popping up on the brand new 3 day old drive, too. TM seems to work when it wants to!
All this mess makes me feel really uneasy about using TM at all. Should I change to Retrospect or something? Should I continue to use it and ignore the errors that so many of us seem to be plagued with? Can TM totally FUBAR a drive with these errors?
I need a drink after this mess, so please feel free to chime in with your thoughts and suggestions.
Thanks all for giving me advise and encouragement.
Anthony

Can't get ATV working with Onkyo TX-SR605-URGENT ASSISTANCE NEEDED!!

I'm hoping someone will be able to give me some advice, as I've now spent way too much time trying to figure out what's going wrong. I've just purchased the Onkyo receiver, which in itself is an extremely daunting piece of equipment after my very straightforward Rotel stereo amp!
I have only 1 HDMI connection available on my 32" Panasonic LCD TV & have, to date, had my ATV connected to it. With my ATV also connected to my amp (via RCA cable), I've been happily viewing/listening to all my iTunes content this way. I understand from reading elsewhere in this forum that I should be able to maintain my HDMI connection to ATV, connect into the receiver using optical, and by so doing, obtain the same results (if not better, thanks to the optical connection) as was previously the case. So far, I've been unable to do this. The only way I've been able to get any audio happening through the speakers is by reconnecting the RCA cable. The optical cable I purchased by the way is a good quality one so I doubt this is where the problem lies - although I guess it's possible.
The 1st problem I encountered when endeavouring to set the system up was that I was unable to get any onscreen information, as I couldn't find an AV input that responded to the receiver's 'setup instructions'. I assumed this would come via the TV's HDMI AV option, given the ATV is the means of connecting to the TV & that's connected via HDMI, but no joy. However, I did some of the basic setup w/o the onscreen visuals, and proceeded to see if I could access my iTunes content with the connections I referred to earlier. As I said before ... no go w/o the RCA cable connected and even then, no sound through the speakers if I reverted to just watching the TV.
I'm driving myself crazy here, and am now at the point where I can see no value in continuing to read & re-read the Onkyo manual. Although I can accept that it's likely to take me some time to learn how to properly drive this beast and get the most out of it, I don't think (from what I've read elsewhere here) that it should be this hard to get what I'm wanting up and running.
Please HELP and save my sanity!
[Thanks in advance to anyone who comes to the rescue ]

jrmccoy, thank you so much! I have never used an optical connection until now, & so was not aware of the necessity to get the 'snap' happening in order to get a good connection. With some trepidation, I applied the required force to the connection to the ATV - sure enough, it 'snapped' in. I tried to get the receiver connection to snap as well, but had no luck there - it seems to be a very 'sloppy' rather than tight connection that slips out with very little effort. However, after pushing really hard on the cable & getting no better connection, I gave up & tried it as was. The result was that , yipee, I now have it all working as I'd anticipated it should. The only thing I still don't have, is the TV sound coming through the speakers - I thought that with the ATV providing the conduit between the TV & the receiver, I wouldn't need any other connection from the receiver to the TV. I suspect now that that was an incorrect assumption! Thought it was all a bit too easy ... sigh.
Once again Apple Discussions have come to my rescue - I honestly don't know what I'd do without the assistance of all you generous people out there with so much & such wide-ranging knowledge!

I need to use iMovie, but it says that my Quick Time needs to be updated.. but there are no new updates available

i need to use imovie for a project and i tried to open it but it says i need version 7.6.0 or later, so i went to software updates and there are no updates for my computer.
Any suggestions on what to do?!
thanks,
lauren

It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384)

Quick assistance needed: project corrupted!

Similar Messages

Maybe you are looking for