Quick question about rendering and exporting with multiple presets

Probably a very simple question but I'm pretty new to PPro, so I'd appreciate your help...
I've got an uncompressed AVI video that I want to export to mp4 using several presets (that means several exports). What I intend to do is the following:
I create a sequence and put my AVI file in there and then I just apply the preset and without rendering go to export media, select my export setting, and put it in the encoding queue at the Media Encoder. Then on the same sequence, I clear the preset and apply a new one, and again without rendering, go to export and then to the encoding queue. I repeat this for as many times as presets as I want to apply. At the end I have created (in no more than 2-3 minutes) several exports in the Adobe Media Encoder queue, that I can launch and go and do something else while encoding...
My question: will the export files each have the different preset applied even though it was not rendered? if it does not work, would that work if I were to do this with each preset applied on a different sequence, even without rendering?
Thanks in advance for your input!

I create a sequence and put my AVI file in there and then I just apply the preset.
Then on the same sequence, I clear the preset and apply a new one, and again without rendering, go to export and then to the encoding queue.
Does "apply the preset" mean selecting an encoding preset
before sending the Sequence to the Queue?
If I understand what you are trying to do...
It sounds like you want to do multiple, different format
exports from the same Premiere Sequence.
If so...
I would Queue the Sequence to Media Encoder once from Premiere,
then duplicate the entry in the Queue (Ctrl+D) and assign the
different encode types to the duplicates in Media Encoder,
(instead of Queueing the Sequence multiple times).
...will the export files each have the different preset applied even though it was not rendered?
A Sequence will be encoded using the assigned settings.
You can set multiple encodes in the Queue, each with different settings.
I'm not sure what you mean by "even though it was not rendered...".
Unless you have specified 'Use Preview Files' in your encoding,
it will make no difference if your Sequence is 'Timeline Preview'
rendered or not.

Similar Messages

  • Any way to export with multiple presets at once?

    Hi! Is there any way to export with multiple presets at once? I do a lot of product photography, usually clients send me around 5 to 10 pieces to photograph, and from each photo requires to be exported to about 7 different formats and sizes for different uses. I have a preset for each export, but this requires multiple clicks per export, select the preset, the destination folder, etc.....   and at the end I end taking about 1 hour to just export files when if I could just select 1 time a folder of presets and the destination folder just once, then it will take no time to get all oft those exports.
    Thanks!

    Some of those other photographers have assistants they can task with doing the drudgery.
    I would describe what you're wanting scripted multiple exporting, not multiple export presets, because multiple-exports don't necessarily rely on presets, just initiating an Export and clicking on various things for each one.
    I assume you have a preset set for each of the 7 format-size-uses variations, and then most of the time consuming part is setting the Choosing the destination folder that gets mirrored to DropBox?  You can copy/paste most of the path into the Folder address area after clicking Choose.
    Without knowing what your master-photo folders and dropbox-mirror folder names and organization are it's hard to know if you've thought of all the shortcuts you might use or if things are organized in the most efficient manner.
    If you're on Windows, maybe something like AutoHotKey macros would help with what you're doing.

  • Question regarding ScrollView and pageControl with multiple XIBs

    Hi,
    I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
    I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
    My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc. Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
    I do hope that this makes sense. I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
    Any help is most appreciated.
    Thanks

    Hi Ziximo, and welcome to the Dev Forums!
    Ziximo wrote:
    I am very new to iPhone programmming and OO type programming in general so please forgive me for my basic questions.
    No forgiveness is necessary. You came to the right place.
    I am trying to set a paging scrollview up with each page being loaded from a different XIB and put into a view controller. This viewcontroller is attached to a scrollview that's put on a "Detail" view. I have this working OK with blank XIB pages.
    In case it's useful to you, here's a thread which shows how to use the PageControl sample app as the template for what you're doing: [Re: Flipping through views help|http://discussions.apple.com/thread.jspa?messageID=10417960&#10417960].
    My question is, when I start adding fields/buttons to the different XIBs how should I then process the actions etc.
    The advice you have from thomas-r is right on target, so I'll just try to add to that. Firstly, I think you may be making a diligent attempt at "top-down" design, which is commendable. However there's a dirty little secret that working programmers don't share with managers: Quite often we don't produce the functional specification until we get the code working.
    In other words, thomas-r's reference to Murphy isn't an insult. That's just how software gets designed.
    In general, the decision to make a new class should be based on encapsulation and re-usability. For example when you get a memory warning, you might want to release all of the resources required for a screen that isn't currently visible. If that screen and its controller can be fully regenerated from one nib, this can be an easy task.
    As another example, say the top-level controller is an instance of your ScrollViewController class. If you limit that controller to managing the scroll view and page control, you'll probably have a class you can reuse the next time you need a paging scroll view. But if you pack the functionality for multiple content views into that same controller, the class will only be useful for an identical app.
    .. or do I use a single class (the "Detail" screen) and do all the processing in that class?, is that even possible?
    So, no, I would definitely not attempt to put all the control in one class. Yes, it's possible, but besides being bad practice, it's awkward to implement. For example, when you make a nib which is owned by a view controller, it's easy to connect that controller's outlets and action methods to controls which are defined in that nib. There are ways to connect controls to an object defined in another nib, but it's much more difficult. It's not a "natural" configuration, and that by itself should give us second thoughts about our design. On the other hand, if we make one giant nib which is owned by the top-level controller, memory management goes out the window. We would need to unload everything in that nib to gracefully handle a memory warning.
    Do I create a seperate .h and .m file for each XIB and add the individual screen processing into the individual classes ...
    Yes. This gives us the reusability and encapsulation we want. The only remaining question is: "Do I need a separate controller class with it's own custom xib for each screen?". Well you may not. There could be two or more screens that are so similar (e.g. the same layout and functionality but with a different image) they can each use an instance of the same controller class and share the same xib.
    I usually start with a different controller class and a different xib for each screen. Then, near the end of the project, I'll look at all those controllers and see if two or more are nearly identical. If so, I might get rid of one or more classes, and possibly one or more xibs as well. But I'd almost never assume I can merge two controller classes at the outset. If I did that, I might start adding kludges to the merged class as I found differences between the screens I hadn't seen earlier. When the merged class finally got too complex for anyone to maintain, the job of splitting it up might be nasty.
    I do hope that this makes sense.
    I think that's my line.
    I'm still going through the basic learning books and I'm maybe trying to run before I can walk.
    If you've suceeded in getting the skeleton working--i.e. you're paging through blank screens, each with it's own vanilla controller/xib, without any bugs, I'd say you're more than ready for the question you're asking here. And it's a very good question.
    \- Ray

  • Quick Question About Ringtones and iPhone

    I've looked through the discussions and could not find my answer. If you know of a discussion already posted please refer me to that.
    Question: After buying a song from iTunes is there a statute of limitations governing the song's ability to create a ringtone?
    None of the songs that I bought before my iPhone can be made into ringtones and songs that I bought a few days ago, which initially I could make into a ringtone, but did not, now can no longer be made into a ringtone.
    Also, is there any program besides iTunes that can be used to create ringtones from any song?
    Thank you for any and all help.
    Message was edited by: Abe

    No there is not a time limit that I know of. The bell has disappeared on mine too. Have you clicked Store>create ringtone?
    There are many, many posts about other ways to make ringtones:
    http://discussions.apple.com/thread.jspa?messageID=8256727&#8256727
    http://discussions.apple.com/thread.jspa?messageID=8598523&#8598523
    http://discussions.apple.com/thread.jspa?messageID=8682828&#8682828
    http://discussions.apple.com/thread.jspa?messageID=8613825&#8613825
    http://discussions.apple.com/thread.jspa?messageID=8570952&#8570952
    http://discussions.apple.com/thread.jspa?messageID=8631324&#8631324
    These are just the first page of many in a forum search.

  • Question about redeploying a Project with multiple packages

     I know that if I make changes to a single package within a project in SSIS 2012 that the entire project must be re-deployed.  Also, I know that the project version is updated when it is re-deployed.   My question
    is about the packages in the re-deployed project that have not changed.  Does anything actually change in the unaffected packages when only a single package is modified?  Do the Identifiers for the all packages change or just the package
    (or packages) that have been modified?  I'd really like to hear from someone with actual experience with this issue.
    Harold Jackson

    Since you rebuild the version of the package gets incremented. No structural changes occur.
    Arthur
    MyBlog
    Twitter

  • New iPod owner - Quick question about iTunes and iPod

    Hey everyone. I just bought the new 5.5G black 30GB.
    I have a lot of untagged MP3s, but my boyfriend tagged most of them. After I overwrite the untagged files (but with the same filename) with the tagged files, now that I have all of my music on iTunes and on my iPod, how do I get iTunes to do a mass refresh and see all the tags, so it can show them properly and update the iPod accordingly?
    Also, my new ipod keeps crashing! It keeps freezing when I hit the skip button or try to do something when it's loading a video or a song. It just seems really unstable. Any help is much appreciated. Thanks!

    oh sorry i misunderstood you
    this is from i-tunes help - is this any good
    Song titles look scrambled after importing from another application
    If a song's title and information don't appear correctly, the file was probably created using a program that stores information in a different way from iTunes. You may be able to resolve the problem by reversing the Unicode characters in the song tags.
    To reverse the Unicode characters:
    Select the song and choose Advanced > Convert ID3 Tags.
    To select multiple adjacent songs, press the Shift key while you click the song titles. To select multiple songs that are not adjacent, press the Control key and click.
    Click Reverse Unicode.
    To change the information back to what you had before, choose Reverse Unicode again.

  • Quick Question about Authorisation and FMS

    Hi,
    Can someone tell me if it's possible configure FMS 3.5 so that it authenticates against Webseal so that only authorised users can have access to the media?
    Thanks

    Does the normal version of FMS support cookie passing? We have Webseal infront of FMS and it seems that our flash player doesn't always pass the authorisation cookie through.
    Also could you expand more on the use of  LoadVars, XML send/load, NetServices, or XMLSockets to communicate with Webseal?
    Many Thanks

  • Quick question about MPE and GPU configuration.

    I have 2 graphics card in my mac pro. I am trying to use one to drive the displays and dedicate the other solely to PPro MPE. My question is do i have to connect a display to the GPU to enable MPE?

    Damn! I had a feeling it was like that. So in a dual monitor setup if I have a CUDA enabled card driving one display and a non cuda card driving the other will MPE work if i put just the program monitor in it and keep the rest in the other(non-CUDA) monitor?

  • Quick question about inheritance and exceptions

    If I have two classes like this:
    public class ClassA {
        public void myMethod() throws NumberFormatException {
          throw new NumberFormatException();
    public class ClassB extends ClassA {
        public void myMethod() {
    }Does myMethod() in classA override myMethod in classB?
    And why?
    Thank you,
    V

    I just want to add that since NumberFormatException is
    a descendant of RuntimeException, you are not required
    to declare that the method throws this exception. Some
    people think it is a good idea to declare it anyway
    for clarity. Personally, I don't think so.I agree.
    I think Sun recommends that you don't declare unchecked exceptions in the method declaration, but do document them in the javadoc comments.

  • Quick question about Photoshop and Bridge

    If someone purchases the Standard Photoshop software, does Bridge come with it? I think it does, but I am not sure.

     

  • Quick question about AppleScript and "current playlist."

    I have a few scrips that I'd like to have operate on whatever playlist is selected at the moment. The script dictionary has a "current playlist" object for iTunes, but it references the playlist the currently playing song is in, not the currently selected playlist. This is not what I want.
    I suppose I could make iTunes play, pause, then stop in my script, but it seems like there has to be an easier way. Suggestions?

    Hi,
    Someone in the Applescript Forum might be able to help:
    http://discussions.apple.com/forum.jspa?forumID=724
    Regards,
    Colin R.

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Premiere Pro CC - Playback issues, rendering and export

    Adobe Premiere Pro CC 7.2.2
    Computer: HP Elite Book
    OS: Window 7 Professional
    RAM: 8GB
    Intel I7 Processor
    64 Bit Operating System
    Intel HD Graphics Card
    250 GB Computer, 39.2 GB Free
    Hello all -
    I am trying to edit, render, and export a video for play on YouTube.  The source is a Camtasia Studio 8 Screen capture with a 1080P High Defintion PTZ camera that is hooked up to the computer as the "webcam".  We recorded the screen, used Camtasia to produce and edit, and saved it as a .MOV
    I then transferred the .MOV to my computer and opened Premiere Pro CC.  I have been watching a lot of YouTube videos and have a read a lot of threads, so I decided that a simple edit job would be the easiest and fastest.  I have attempted this 3 times now, each try has been a failure.
    Attempt 1:
    Opened a new project.  Imported my video.  Dropped it into a sequence.  Added an opening and closing title card, plus lower third captions to video, and added transitions.  Playback was choppy, so I read that it needed to be rendered.  I rendered the sequence (it took most of the evening).  When I went to play it back, I just got footage that said "Media pending" in 7 different languages.
    Attempt 2:  I decided not to render, just export.  Followed the steps above, but instead of rendering, and exported it.  I exported as media file, chose the TechSmith Capture Codec, and .AVI as the format.  Let it do it's thing.  The result was very fuzzy, plus the audio was about 10 seconds out of sync from the video.
    Attempt 3:  I didn't get very far here, because when I started playback to check my audio syncing, my computer started flipping between Premiere and my desktop, just swtiching back and forth.
    Any help here, suggestions, would be very much appreciated.  I need to post this video for work as soon as I can.
    Adobe Premiere Pro CC 7.2.2
    Computer: HP Elite Book
    OS: Window 7 Professional
    RAM: 8GB
    Intel I7 Processor
    64 Bit Operating System
    Intel HD Graphics Card
    250 GB Computer, 39.2 GB Free

    Camtasia http://forums.adobe.com/thread/836800 may help
    -and Lagarith Codec http://forums.adobe.com/thread/1287577
    -and http://forums.adobe.com/thread/775288
    -and http://forums.adobe.com/thread/453044
    -and http://forums.adobe.com/message/3202148

Maybe you are looking for