Quick question on Development configuration

Hi,
Created an SC and imported Development configuration and created a DC and performed the steps and whole process was fine..that is i was able to deploy on test system using JDI.
I want to add one more DC to this SC, so i removed my development configuration from NWDS and imported it again and in the inactive workspace, context menu of the compartment, selected "Create new DC" and created one, and assigned an activity to that
I went to activities view and check in and then it popped up for activation. clicked on activate and then now assigned a request id for that. IT stayed there for a long time.
CAME BACK NEXT DAY
Started CBS web GUI and went to "Requests" Page and for that particular request id, in the column "CONFIRMED", it showed "-". so, I selected that request and clicked on "CONFIRM". and went back to NWDS and released the activity and came back to CMS to perform all the transport process, so the file is deployed in Test server Now.
But as i said, why did it take a day ?
a) Am I missing some concept of Development Configuration here. When will the Development Configruation change and how often should a developer remove and import the Development configuration?
b) When I create a SC with a DC and checked in and activated, it was fast. but when i tried to add second DC to the same SC and tried to activate that, as I said it took a day for me. what might be the problem.
is there some time specified that when a build must occur. if that is the case, how was my first SC with a DC worked fast? any thing missing here?
please help me in this regard.
Thank you

hi wagner,
Thank you for the reply, but the problem still persists..
1. created a SC , imported Dev conf, created a new DC -> checked in --> activate --> release --> transport studio..worked fine.
2. created a second DC (no dependencies on any others) in the same SC --> checked in --> activate .. thats it.. the request number is assigned and stays for a long time... went to CBS GUI and I have seen that the request is in processing stage, so it doesnt have a request log to look if there are any errors at all...
could someone please help me in this regard.
THank you

Similar Messages

  • SAP NW Developer Studio: Problem with Import Development Configuration(DC)

    Dear Experts!
    I have a problem with SAP NetWeaver Developer Studio when import a Developement Configuration.
    I create a Software Component(SC) in SLD( with Dependencies:  SAP J2EE Engine, SAP Java Tech Service, DI BUILD TOOL, Then I create a Development Configuration(DC) and add this SC.
    On SAP Netweaver  Developer  Studio I import this DC. I see on the Component Browser My DC include: my software conponent , and SCs: SAPJEE, SAP_BUILDT, SAP_JTECHS but in DC detail there are nothing. So I cannot create the Development Component
    Please help me resolve this issue.
    Thanks all

    Hi,
    you cannot see the DCs (for SCs like SAPBUILDT, JTECHS, JEE, etc) in NWDS, because there is nothing imported into the buildspace(s) DEV (and cons).
    You need to go to the http://<host>:<port>/devinf -- CMS webui, to the Transport Studio, go to the Check-in tab, and check-in all the software you can see in the queue (which you have also added previously in SLD for your software) . This is a quick process, you'll see your software moved to the Development tab and waiting for import.
    Import all the components. This can take longer. As soon as all of them finished, you can open up your NWDS again. In order to see the DCs this time when you expand the corresponding node, you need to reimport (but at least) update the development configuration  (you do it in NWDS in the context menu of the development config in question).
    Best Regards,
    Ervin
    Edited by: Ervin Szolke on Sep 2, 2010 1:26 PM

  • A quick question about WebDynpro SLD and R/3 with concurrent users

    Hello ,
    I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3  for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
    - I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
    Thanks Ubergeeks,
    Guy

    Hi Guy
    You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because  a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
    For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
    Regards
    Pran

  • Quick Question re Data Source

    Hi
    I have a quick question re datasource login.
    I havent touched my Crystal Reports for about a year. Since I created the reports (which users have been using through Crystal Reports server) I have changed my PC.
    I need to make a change in the formulas of the reports so I have reinstalled Crystal Reports 11 onto my PC and opened the reports. The forumula change is simple but I am having a nightmare with the data source login. The report runs against an SQL database. From memory all I did the last time was create an ODBC connection on my PC (which used the the SQL login sa account) and configured the reports to use that ODBC connection. When I open the report it asks me for the data source location which I tell it to use the one I created and the report runs fine.
    If I close Crystal Reports and and then re-open, I press F5 to run the report and it gain asks me for the data source credentials.
    Any ideas, I'm sure it is something simple I am missing?
    Thanks

    Guys
    Thanks for your help
    Ive managed to fix it but not really sure how although I'm sure a few of the things you have mentioned is what I have done.
    I basically restored the reports from last nights backup (before I did the changes), re-did the changes and saved and now it seems  to work. I think the difference here is that I had created the odbc connection prior to changing the reports - if that makes sense?
    What I would like to do is fully understand how this data source connection works.
    Don, when I open the report now and hit f5 the report presents me with the parameters and not the database login screen as it was doing before - how is this? What credentials is it using? The SQL sa account (which I configured the ODBC connection to use) or is it my domain account of which I assume permissions for this account must be set on the actual SQL database?
    As you and Jeff suggested when I look at the datasource connection screen it shows "trusted Connection: 1" - what does this mean and how is this configured, have I configured this in Crystal somewhere?
    Thanks
    Andy

  • The version 0000000075 of development configuration is now available

    Hi experts,
    when im loging into nwdi im getting pop up with below message , can u please explain what is the verison 0000000075 and why is it asking for that..
    The version 0000000075 of development configuration is now available
    Do you want to update the development Configuration ?
    Regards
    Govardan Raj

    Hi Govardan,
    a track has a server side development config (created as per the domain data settings and track data settings i.e. includes cbs, dtr, cms url, sld nameserver and the software component dependencies).
    It is an XML file you can check in CMS webui -- Track Data -- Build variants -- display development config.
    If you create a devconfig in your NWDS, then this XML file is getting synced to your local space (this is the file called .confdef).
    After this no more sync is getting done, but the locally stored .confdef is used by the devconfig, so it knows, which cms, dtr, cbs , sld to contact, etc. in other words: how to use the track.
    If you change on the server side devconfig (by changing on say cbs, dtr or sld url or SC dependency setup) then NWDS recognizes that its locally stored .confdef became outdated.
    This is why you have that popup that the server side devconf version XY is now available and you can make the locally stored one up to date.
    I hope this answers your question.
    Best Regards,
    Ervin

  • Oracle 10gR2 Dataguard quick question

    Hi -
    Just a quick question about Oracle 10gR2 Dataguard. I'm in the process of creating dataguard standby, which is running for few hours and could take few more hours because of the size and the standby's network latency, and i'm using OMS to create the DG. I'm in a situation now to create new tablespace(A) and also one more datafile to the existing tablespace(B).
    Question is: How would this new tablespace and the new datafile in the existing tablespace affect the DG standby which is about to finish in couple hours? Will the DG pickup the new changes from the primary? Or, will it be done with error from the mismatch of the number of files? The issue is that i can't wait for the standby creation to be done as the additional tablespace and datafile requirement is production critical, and should be added right away.
    note: standby_file_management is set to auto.
    Thanks for your response.
    regards.

    Your post is a bit vague, as OMS is an acronym for Oracle Management Server, which is a service only.
    If you would have stated you are using Database Control, or RMAN duplicate database, the picture would have been much clearer.
    Database Control uses rman duplicate database.
    Recovery is the mandatory implicit last step of this procedure to pick up all changes since you started the duplicate.
    One word of warning: Network latency is one thing to avoid like hell in a standby configuration.
    It might even slow down your production database.
    Sybrand Bakker
    Senior Oracle DBA

  • Development configuration name

    Dear all,
    After some struggling I managed to configure NWDI (but "only" with CMS, not CM services).
    Deployment to DEV system works.
    And I really enjoy to have code versioning now!
    But I've still some questions:
    In NWDS in the 'Composite Designer' perspective not all the DCs appear the same way:
    Some seem to belong to Development Configuration T62_dev, some to T62_T62_D.
    What's the reason for that difference?
    In CMS I have only one track:
    In NWDS DTR perspective I see only Development Configuration T62_62...
    It seems that T62_62 is the internal name:
    Can I make that somehow align in "Composite designer' perspective?
    By the way:
    Why do I see so many availabel Development Configurations in NWDS?
    Most of them have already been deleted...
    How can I delete SANDBOX_dev etc.?
    Thanks in advance!
    Best regards,
    Thorsten.

    Those were the files created with same name on my local machien so appeared with an appended number

  • What development/configuration is required to use smart forms?

    Hi All,
    My Question is,
    What Development/configuration is required to use smart forms to implement
    electronic workflow with ESS/MSS?

    Dear Prabhakar,
       Smartforms is exactly the same in ESS too. U just develop it and later just need to attach it to ESS.
    Regards,
    Deva.

  • Fixed and 2 quick questions (bios thread)

    Hi Everyone, i need your help again...
    [....]. since i installed Win2k3 on my system i was getting stability problems, especially lockups to black screen in games. On Win2k3 i was using the exact same drivers as I am going to list soon, and so I thought I'd install Windows XP again on a spare hard drive to see if this helped. I wish i'd never messed with my system my previous XP install was almost 100% stable, but that's another  story.
    Today I perfomed these steps in this order:
    1)Downloaded SP1a
    2)formatted new hard drive
    3)Booted from CD, did a Windows XP Pro install
    4)Started XP Pro, installed SP1a
    5)Installed Nforce system drivers and Display Drivers 29.42 (these were very good to me before...) and restarted
    6)Installed Speedtouch USB ADSL Drivers 2.0.1.2 and went online
    6.5)Enabled Hardware Acceleration on Displayt Properties
    6.7) Installed direct x 9.0a web setup.
    7)Did full windows update: all the critical stuff, most of the recommended (except MEssanger, Media Player and a couple others) and the CPU driver (left my Gfx and Sound on the above)
    8) After a restart started a game
    It lasted all of 10 seconds once I started playing.
    Ok, maybe 5 seconds. Smae as Win2k3!!! I was running bios default performance options, with APIC off... so I ran Prime 95 for a while, got no errors .... about to try a memtest86 but I'm pretty cetrain the memory is good never had trouble with it before at all and I've tested it before too.
    Can someone help me out? Here's my hardware config
    [size=11]
    AMD XP 1900+ (no overclock any more)
    MSI K7N420D MB
    2*512MB DDR266 Samsung 'Transcend' Memory (unbranded really) (16 chip DIMMs)
    Geforce 2 MX400 32MB SDRAM (unbranded - runs a little faster then onboard graphics)
    Adaptec 29160LP Scsi Card
    IBM 16000rpm 32GB SCSI Disk (UW-2)
    2*WD1000BB 100GB Western Digital IDE Drives (the normal ones with 2mb cache) in Software Raid - 0 on Promise card
    18GB Maxtor ATA66 IDE hd on Nforce, with CDR.
    a Promise Ultra TX100 Dual IDE Controller card (for CD Rom + expansion)
    Enermax 431w PSU / 7200rpm fan on heavy HS.
    Windows XP SP1 / DX 9.0a (going to reformat to Win2003)
    [/SIZE]
    I could really do with anyone's working driver config for a windows XP sp1a system, and how to build it from the bottom up. If a given driver config that works 100% for others fails for me I can start hardware troubleshooting and cursing loudly, otherwise with any luck it'll fix my problem.... please help me out i know there are people out there still running NForce 1 boards!
    Quick question that could help: what sound driver revision from windows update should i be using? I can get the archived ones....
    Thanks,
    Naveen.
    PS If i manage to fix it i'll update here, but i need a hand plz

    .... also, I have the same errors running the same game from Win2k3 on a SCSI drive through the PCI bus (adaptec 29160) on the 2.7 bios. It looks like there is still an issue with fast PCI bus read/writes, sound usage and AGP card usage causing crashes. Discounting the OS change and APIC, I have these scenarios:
    1) Game running off IDE drive on Nforce IDE ports: fine
    2) Running of IDE drives on promise controller card: fails, locks.
    3) Running off scsi drive on Adaptec 29160 card: fails, game locks.
    So we may still have an issue with PCI read/writes and stability on bios 2.7 and Nforce system drivers 2.03 ... which is big news really.
    I hope one of the moderators can put MSI in the picture and get them or NVidia to look into this. I can try eliminating APIC and the OS/Drivers from the issue, and install the game on all 3 drive configurations to confirm the above if necessary, but it's what it looks like from here. Using Performance bios defaults with no overclock, underclocking didnt help.
    Perhaps bios 2.4 will fix this in which case the bios still needs work, 2 years on.
    Naveen

  • A few quick questions about publishing for iPhone/Android

    I'm currently developing an iPhone/Android game in CS5 and I just have a few quick questions.  If anyone can answer even one or two I'd really appreciate it
    1- I'm developing using a 320 x 480 resolution for the iphone.  When I tested it, the status bar on the top of the screen makes the edges disappear.  How should I turn off the status bar?  And if I can't what resolution should I use?
    2- The performance is a little slow, and the game isn't very intense at all.  What's a good way to improve performance?
    3- For Android, what should I do for the resolution?  Is there a standard resolution or do I have to have multiple resolutions for multiple devices?
    4- Finally, is it worth getting the free trial of CS5.5 before I publish?  Is there anything in there that will be a huge improvement over CS5?
    All help is appreciated

    1. Publish in fullscreen
    2. Use bitmaps, cache all bitmaps, use minimized looping structure etc.
        http://www.yeahbutisitflash.com/?p=986
    3. Android: 480 * 800
    4. Not that much, but you have GUI updates and have a GUI publishing screen for packager for iphone too.

  • CDP quick question

    Hi quick question, 
    Scenario looks like this: 
    ASR1k --- ASR9k -- ASR9k --- ASR1k 
    The connection between ASR1ks are l2transport on the ASR9k side. Therefore we see the ASR1k as a CDP neighbor from the other ASR1k. This is fine, but my question is why we also see the ASR9k as a CDP neighbor from the ASR1k via the same port. I thought CDP should either be tunnelled or not. 
    So, CDP on the ASR1ks show both the other ASR1k (which is fine), but it also show the directly connected ASR9k via the same interface. Is this normal? 
    Thanks, 
    Federico.

    Adam, thanks for taking care of this and you are correct.
    We made a change, based on popular demand to peel out certain control traffic out of the untagged EFP in the existence of MST/CDP configuration.
    If the service is not configured locally on the l2tranporting interface then those packets are subject to the EFP transport.
    cheers!
    xander

  • Quick question from future mac user

    Hi there.
    Just a quick question about the Intel iMacs.
    Total noob with Macs so please forgive me, I'm looking to get away from Windows and PC's but not sure what I would need exactly.
    Would the 24":3.06GHz Intel Core 2 Duo iMac with 4GBs of RAM and 1TB hdd be more than enough to handle video/audio editing with Final Cut Pro Studio, some gaming (such as newer MMO games or RPG/FPS games) and maybe running VMware Fusion for running Windows apps and games that I have/use that are either not available or not yet supported by Apple?
    Or would I be looking at goin with the Mac Pro?
    I'd rather shoot for the iMac because I'm SO tired of PC's and boxes and would like my computer to actually look nice as well as kick butt. But I'm just worried that if I got with the iMac I won't be able to perform those functions well or at all.
    I love the look and feel of the iMac although I don't think you can get more than 4GBs of RAM or more than ONE hard drive inside (which isn't a big concern as I can always use external drives) so I'm just wondering if upgrading to the extra ram and hdd space from the get go would be a great help without having to worry about adding more later.
    I'd like to be able to just use the iMac than the Mac Pro because the price difference seems to jump up quite a bit between iMac and Mac Pro. I'm just worried if that type of iMac setup wouldn't be enough for what I need.
    Any suggestions or information would be greatly appreciated. Thanks.
    Janin

    The iMac in general is more than enough to perform those tasks well however the Mac Pro still has it's advantages. Lenn already went over those so take a look at these speed scores as they may help you to make your decision.
    http://www.marketingtactics.com/Speedmark/
    Either way I recommend getting the base RAM configuration from Apple and purchase RAM from OWC.
    http://eshop.macsales.com/item/Other%20World%20Computing/6400DDR2S4MP/
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=284&type=Memory&TI=0 655&shoupgrds=Show+Upgrades
    George

  • SC description while creating Development Configuration

    Hi all
    I am using NWDS and trying to understand more this tool and this kind of developing. I am looking at Archive SC including while creating the Development Configuration. They are indicated with a sort of ID not completely self explaining and I don't know which of them I have to include because I don't know what they do. The question is: is there a description of SC and their functionality? And does anybody know why if I add an Archive SC later, I have to mandatory change the name of SC even if I included it while creating Development Configuration, was left its Archive name?
    Thanks
    Gabriele

    Hi ,
    This exception is raised when a connection or communications failure occurs.
    This exception reports all failures and system problems on the remote machine . so look like there  is some porblem with your system connection .
    Could you please check in your host file , is that entry for system is maintain  or not ?
    Hope this help .
    Regards,
    Dinesh

  • Report Generation Toolkit Error Quick Question

    Hi,
         I created the most awesome LabVIEW report ever at my desk using a trial version of the RGT and Office 2003.  I took this to my production machine and ")@#(&%(*#^%()^!!!"  The production machine has office 2007 and a fully licensed version of the RGT.  Both machines have LabVIEW 8.6.0.  I've read all the stuff about these errors and something about classes and dll's and whatnot's.  So my quick question, is:  Instead of matching the versions of Microsoft Office as recommended, can I just rewrite from scratch the VI that creates this world's most awesome LabVIEW report on the production machine to create the same effect? 
    Solved!
    Go to Solution.

    Hi 
    Quick Answer: Probably
    Slower answer: Microsoft changed a lot of things behind the scenes in Office 2007, but the Report Generation toolkit version 1.1.3 supports Office 2007 so you should be good to go. Depends on what functions are included in your VI. Liek the read me says "Several default settings in Microsoft Office 2007 differ slightly from previous versions. Reports you generate using Office 2007 might look different than reports you generate from other versions of Office because font sizes, cell sizes, and so on, differ."
    Best Regards
    David
    NISW

  • Two quick questions about Library after moving beginning on a new computer

    Hi there,
    I just moved from Windows to Mac, meaning I had to move my iTunes library from the old PC to my new MBA.
    Just a couple of quick questions.
    1. When I started iTunes on my new Mac, in the preferences I directed the media folder to the folder with all my itunes music/podcasts etc, and then I imported the Library XML file.  Is this incorrect? Should I have imported a different file? Should I have used the itl file instead? 
    If so, should I delete the library and start again?  (if this is the case, please suggest the best way of doing this without affecting my media)
    - a kind of sub-question to this one:  some of the media files arent showing up in the iTunes library, but they are in the media folder on the ext HDD.  Is there a way I can find out which ones havent been recognized by iTunes?  Whats the best way of getting them in to my library?
    2. Pretty much half of my podcasts have not been loaded in the new iTunes.  The ones that havent were ones that I subscribed to on my iPhone, whereas the ones that show up in iTunes were ones I downloaded from iTunes.  When I connect my iPhone and sync it with iTunes, will those podcasts show up in iTunes?  Or is there a risk that they will be deleted from my iPhone?
    Cheers,

    The .xml is lacking some information such as ratings, date added, and play count.  Using the .itl includes this information but cannot be imported using the method you did.
    A complete library is everything in the iTunes folder.  By using the method you did you left the artwork behind in the artwork folder on the other machine.
    Selecting the media folder in preferences does not get iTunes to recognize the media.  All it does is tell iTunes to start storing new media in that location.
    Using the method I outlined nothing will be missed (with the exception of WMA) because you aren't rebuilding your library, you are using the one that already exists.
    You don't have to re-copy everything as long as you get the stuff you missed and re-assemble it all as it was before except not on the Mac.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Maybe you are looking for