Quick question re: hard drive space

I'm running out of space on my hard drive. Here's my question: Is there a way to only store music/videos on the iPod itself without having to store them on the iTunes on my hard drive? Or would wiping out the library on iTunes wipe out everything on my iPod the next time I plugged it in? Any suggestions would be greatly appreciated.

You can change the update option of your iPod to "manually manage music and videos" if you want it to delete content from iTunes. You can get details here: Managing content manually on iPod
One major word of caution. If you delete songs from your PC and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem. You should consider investing in an additional internal or external hard drive to store/back up your music. Alternatively at the very least back up songs you can't replace such as iTunes downloads to CD or DVD. Forum member Buegie has compiled a very extensive procedure for backing up your music which you'll find at this link: Backing up iTunes
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

Similar Messages

  • Question about Hard drive Space and Logic Pro

    We just installed Logic Pro 7.2 (and Tiger) onto our Dual G4. We have nearly filled the bootup drive, with tonnes of space on our other hard drives (80GB and 100GB). With only ~4 GB left on the startup drive, will this cause problems with Logic Pro? We have more than the recommended RAM, but I was wondering if the hard drive space might be an issue, like with iDVD where you need ~8-10 GB free to burn a DVD.
    I've been considering copying things over from my startup drive to my 80GB drive (which has tiger on it too)and making the 80 GB drive my new startup drive, but it's a bit of work and if I don't need to do it right away I don't want to bother. What is the recommended amount of free hard drive space and memory for Logic Pro to work well? I personally like to have ~10GB free for anything, but that might be tricky at this point. I want to know if I should go through with the hassle of moving things over or wait a bit and see how it goes. I've not ahd a chance to use the program yet, but I'd like to set it up and keep it working smoothly once I start to use it. Any advice or experience from anyone in this department?

    Your best off having at least 25% free space of any hard drive.
    With Logic, It is a good idea (though not necessary) to have your OS and apps on one HD, and your song files and samples (and other files) on another. I would also suggest that you get a hard drive with a speed of at least 7200rpms.

  • Quick question about showing drive space

    Hi,
    Just got a quick query about showing remaining drive space on the desktop.
    Before I wiped my Pismo and reinstalled Tiger (bad kernel panic), my hard drive and any other connected drives (pen drive, iPod, iDisk, etc) showed up on my Desktop with the name and drive capacity and remaining space underneath the icon.
    Now I've reinstalled, the drive capacity and remaining space don't show up on the Desktop, and I can't find how to turn it on. I've been through Preferences several times and can't find an obvious switch. Have I missed something? I'm running Tiger 10.4.8 with the machine spec below.
    Thanks in advance,
    Rob Johnson

    Sometimes, for no obvious reason, the Finder can be slow to update. And sometimes it updates instantly. Why? "Only the Shadow knows...." or maybe the Apple programmers.
    Francine
    Francine
    Schwieder

  • Question about hard drive space used

    If I run OmniDiskSweeper to sweep my 15" G4 laptop hard drive, the total file size calculated is 31.3 GB. Likewise, if I clone the hard drive to an external drive using SuperDuper!, the total size used on the external drive is 31.3 GB.
    However, if I "Get Info" on the laptop hard drive, the Used size listed is 41.9 GB. Likewise, 41.6 GB is listed as "used" in the OmniDiskSweeper Drive List window, as well as in another utility. I suspect that the 41.6 value is picked up from the Finder.
    What could be the reason that Get Info lists the space used on the hard drive as 10 GB larger than the total size of the files?
    1.5 GHZ PowerPC G4   Mac OS X (10.4.9)  
    Dual 2 GHz G5   Mac OS X (10.4.4)  

    Hmm, I think I have a possible answer. I had to download OmniDiskSweeper and open the help from its Help menu to get this answer.
    It says in the help for OmniDiskSweeper:
    "OmniDiskSweeper only displays files that you have access to from the user account you are logged into. Files in restricted folders are not available and their sizes are not included in the total file sizes you see."
    So, if you have other user accounts, then those files won't necessarily be readable and hence not counted in OmniDiskSweeper. There may also be a few system files and folders that might be unreadable and hence not counted. That should be fine since you probably shouldn't be randomly deleting system files.
    I've also noticed that OmniDiskSweeper shows slight variations of total sizes in its different windows, so it's not too precise. That probably comes from the dynamic nature of hard drive use by the computer, and OmniDiskSweeper trying not to use too many cpu cycles updating incessantly. Just guessing on that part though.
    The 10GB is most likely other user accounts or something else not readable from your own account. The Finder lets you know of course, but OmniDiskSweeper only presents to you what you have permission to access. That doesn't necessarily mean you'll also have permission to delete those things.

  • How do I change the settings in quick time player to screen record video using less hard drive space?

    how do I change the settings in quick time player to use less hard drive space when performing a screen record? When I screen record a video lets say from vimeo, QTP seems to use a lot of hard drive space.  Please help.  Are there settings some where to adjust to slim down the video size? Thanks for your input.

    I just did a short SR test, first I exported to 480p, then I saved the file. Now I have 2 files one 11.9mb (export) and the other 42.8mb (save). I then took the save file and performed an export on it to 480p.  Guess what, it saved at 11.9mb.  So it seemed to save me 3/4 of the space.  Lets see what happens with a 17 minute SR.  Thanks!
    Any suggestions on getting the sound louder with the SR?
    For anyone else ever seeing this post, for me the best was using an external speaker whether wired or bluetooth, facing the left side of the computer where the internal mic hole is.   Good Luck!

  • Hard Drive Space Question

    The new iMovie 08 has me excited about video editing again (family videos). How much hard drive space will I need for every 60 minute mini DV tape I import? Also, will iMovie let me decide where to store the footage?

    miniDV is 13GB/h
    and, yes, iM08 allows the selection of external, firewire connected, MacOsExtended harddrives..
    ... it seems so, iM08 creates a 2GB/h preview-movie of any import, but I'm not a 100% sure about that.. probably, you should count on 15GB/h ..

  • Where's my missing hard drive space?

    I posted earlier about this, it may be a bit off topic but if anyone can offer a clue, I would appreciate it.
    I got my win 7 upgrade and was waiting until vista started giving me headaches or the win7 service pack1 came out to upgrade...vista got me to upgrade today and I have to admit it was much less painful than i anticipated.
    My question is about the missing hard drive space on my Idea center K230 on the box and on the side of the comp it claims a 640 HD (it claims in small print that up to 18gb may be used for the service partition) I questioned this when i first got it and even after deleting all the preloaded crap it was still saying 540 available out of 580GB....then I read that Lenovo has a huge partition for backup. So when I do my upgrade to win 7- 64 bit, I do a clean install and delete the smaller partition and reformat and expand the larger but before installing the new OS it says I have 596 available, so where the hell is the other 44GB of hard drive...did Lenovo rip us off and put 600GB hard drives in the K230's or is there a hidden partition still left that I cant find?
    I am running everything off of my 596GB C: drive, I have my virus stuff and video card extras loaded, everything from the upgrade and 21 available patches and new drivers for most of my stuff....right now I am at at 575gb available and if i can ever find a printer driver that works I will create a backup point or disc from there, whatever win 7 allows. I never wanted the Lenovo one button back up and thought it was stupid to put a big glowing button on the keyboard that wipes your system back to when it came out of the box...I had nightmares of someone getting curious and going "what does this button do?"
    .I notice I have a program files folder and a program files (x86) folder with a bunch of redundant files. what's the deal with this is Lenovo still hiding a backup program (maybe in that hidden partition?)  that fills my hard drive twice as fast or is there a purpose for the file copies?
    Any info on the above questions would be appreciated, and for those of you just looking for upgrade info I have good news, when you finally get your win7 upgrade disc it is the easiest windows installation ever, almost copmpletely automated, and very fast. So far the only sticking point is finding a printer driver, but I have 3 printers i can try, maybe one is supported.

    Hi wise2u!
    You can read all the details about how storage manufacturers use multiples of 1000 to measure disk space, and Windows reports it in multiples of 1024, and there is some overhead for Windows, or you can just use this rule of thumb from wikipedia:
    A general rule of thumb to quickly convert the manufacturer's hard disk capacity to the standard Microsoft Windows formatted capacity is 0.93*capacity of HDD from manufacturer for HDDs less than a terabyte and 0.91*capacity of HDD from manufacturer for HDDs equal to or greater than 1 terabyte.
    0.93 * 640GB = 595GB, which is about what you're seeing.
    I don't work for Lenovo. I'm a crazy volunteer!

  • MY PRECIOUS Hard Drive Space

    First time posting a question.
    So I have an iBook g4. My problem has to do with my Hard Drive. I am down to my last 2GB of hard drive space --oh no! What do I do to get more hard drive space??? I LOVE DOWNLOADING PODCASTS TO LISTEN TO WHEN I'M RELAXING AND DL MUSIC AND PHOTOS. I LOVE MY MAC and I'm really stupid when it comes to technical computer stuff. But i'm willing to do ANYTHING to keep my files intact. I need some help...
    ANY SUGGESTIONS WOULD BE GREATLY APPRECIATION

    Hi Heyitsme and welcome to Apple Discussions.
    "First time posting a question".. and a very good one it is too. You are sailing very close to the wind with only 2 GB of free space. !0% of free space is considered to be the absolute bare minimum with 15% or greater considered to be ideal.
    In the long term you need to consider getting an external drive to store, perhaps, your iTunes library if it is large, and/or your iPhoto library. A better long term solution would be to, not only have an external for back up, but also have a larger internal drive installed. I believe 250 GB is the current largest size available for iBooks which require a PATA/EIDE 2½" drive. The drives themselves are relatively inexpensive, the installation more expensive unless you feel confident in DIY. Post back if you require more info.
    In the short term you need to clear some space if only for the immediate health of your HD, OSX, and your data.
    There are a few quick fixes that you can do immediately with no ill effects.
    For example, on my iBook, I have removed GarageBand from Applications and its Loops from HD/Library/Application Support. As my iBook only has a combo drive and I'm not into video editing anyway I have trashed iDVD & iMovie. (Not DVD player). I have also trashed preloaded games and World Book, and its associated files.
    OS X comes with a vast library of printer drivers, the large proportion of which will never be used by the average user.
    Printer drivers are in the HD/Library/Printers folder. You can safely delete any named drivers that you don't have a printer for. For example, if you have a Canon, you can remove Epson, Lexmark, Hewlett Packard & Brother drivers. Epson alone takes up close to 1gb. You can even remove specific drivers from within the manufacturer's folder. For example, if you have an Epson C86 you can safely trash any other specific drivers in the Epson folder like C46, C66 etc. If, at a later date, you buy a printer whose driver you removed they can be added from your install disk, the disk that comes with the printer or downloaded.
    A word of warning: More cautious heads than mine advise against messing in the HD/Library, but if you stick to the examples above, i.e. GarageBand loops, World Book and printer drivers you will be OK.
    Certainly, I have had no problems with my system after removing those examples.
    Check, too, in your music folder. If you have 'Copy files to iTunes music folder when adding to library' selected in iTunes preferences/Advanced it is possible that you have, say, 'xyz song' in the first level of your Music folder and the same song in Music/iTunes/iTunes Library. If you are sure that you do have 'xyz song' in iTunes, it is safe to delete from 'Music'. The same principle can apply to your Pictures folder and iPhoto Library, but staying with iTunes for a moment, with iTunes open select Edit in the menu bar, then 'Show duplicate songs'. You can trash duplicates if you are sure that they are true duplicates, i.e. exact name, artist and file size. Another little note of caution, neither iTunes nor iPhoto likes having its library messed with from within a Finder window. Resolve duplicates from within the respective application only.
    If you are downloading a lot of stuff it is possible that you have a large 'Incomplete' folder built up over time from aborted downloads. This folder can be found in your 'Home' folder. It is perfectly safe to remove any and all files from this folder.
    Downloaded applications can be a cause of wasted space. An application is usually downloaded as a .DMG (Disk Image). Once the app is installed in your Applications folder there is no necessity to keep the .DMG, although if it is a 'paid for' app it would be wise to back it up to an external/burn to a CD before removing it from your internal. Sometimes apps are downloaded as .zip files, leaving two largely redundant duplicates of the same thing. Again, back up one or the other file type to another medium before trashing if the app is paid for or difficult to find again.
    Some excellent advice has been posted by ~JB~ , with corresponding words of caution.
    Edit: The application Whatsize, linked to in ~JB~'s advice above, used to be a free application. It is now shareware, though I believe it is still free to use on smaller drives such as yours. You can get similar information using Finder, however.
    Open a new Finder window, select Command (⌘) 2, for list view, then Command (⌘) J. Check the 'This window only' button and the 'Size' and 'Calculate all Sizes' boxes. Wait a few moments while it 'calculates'. You should be able to see which folders are taking up the most space. DO NOT REMOVE OR MESS WITHIN THE "SYSTEM" FOLDER or, with the exception of GarageBand loops and printers, the Library folder.
    Dr Smoke has some advice here too.
    Last but by no means least, when you have finished dumping your unwanted stuff in the trash, don't forget to empty it. You haven't regained the space until you do
    …and definitely last this time: If in doubt leave it alone and ask!
    Have fun,
    Adrian

  • Best way to increase hard drive space on Time Capsule?

    Quick questions for those of you who've increased the storage on your Time Capsules:
    1. Did you swap out the internal hard drive or did you add a USB external hard drive?
    2. For those that added a USB external hard drive, what are the drawbacks? I've read some threads saying their external hard drive is flaky and they need to power cycle the TC to get their hard drive visible on their Macs.
    Here's my situation: I have two Macs backing up to a 500GB TC and I only have 13GB free. I want to increase the hard drive space and am toying with these two options:
    1. Swap out the internal hard drive to 1TB and have both Macs back up the new hard drive.
    2. Add a 1TB external USB hard drive and have one Mac back up to that drive while the other Mac continues to back up to the internal 500GB drive.
    FYI, I'm proficient with building PCs so I have no issues swapping the internal hard drive if that's the best option. It's just that adding an external hard drive is a lot easier.

    Based on the how-to articles I've read, it seems like you could remove the rubber pad without destroying it (if one is careful in removing it). That said, I think I'm going to just buy an external HDD and attach it to the TC. dchao99's comment about using an external HDD with his AEBS without issue helps alleviate some of the concerns I had with that option.
    I was toying with buying a Drobo to attach to the TC but I'm pretty sure I'm just gonna get an external HDD like a Western Digital MyBook or something similar.

  • Solutions for lots of hard drive space?

    Yes, this is a repost from my thread in the getting started forum, but I figured that this board is more heavily populated, and perhaps some professional videographers visit here more frequently to help me out, so I'm posting my question here as well. Here I go:
    Hello,
    Next spring and summer, I plan to be shooting and editing weddings. The past weddings I've done, I use about 12 tapes. ~200mb/min x 60 mins x 12 tapes is about 144GB. That's about 3 weddings in a single 500GB hard drive (and I plan on doing about 20 in a year). Obviously, I'm going to need a LOT of hard drive space. I don't want to consider entirely deleting the media after finishing a project because it seems common that clients wish to change little bits of the video, so I want to keep them for a while longer.
    Right now I have a 500GB HD in a firewire400 enclosure. I don't use the internal Mac HD for media.
    What a photographer said that others wedding videographers do and suggested to me was to buy as many HD's needed for the year (approx. so I guess about 7 if 500GB), set a deadline for those whiny clients for returns or re-edits and such, and at the end of the year, and reformat them all and reuse them for the next year.
    I'm thinking of doing the same, but using the same enclosure for all my hard drives, just unplugging and plugging as needed.
    I've heard of using a RAID system. I can't say I know much about using it but with what I'm using, I don't think it's an option? I am using a 17" 2.33ghz MacBook Pro with Final Cut Pro and I plan on getting an aluminum 24" iMac (probably 2.4ghz unless you can convince me otherwise) as a secondary editing machine, and perhaps to make the dreadful capturing process twice as fast.
    So some of my questions are:
    * can plugging and unplugging HD's to an external closure possibly damage the pins?
    * would storing HD's that are not being used at the moment be safe in those plastic containers that usually come with a HD when you buy one? Or would it be damaging to keep one in there and store it away for a year?
    * is this idea okay or would you suggest another method?
    * slightly off-topic but sometimes I take my external hard drive, put it in my laptop bag, and do some editing at another location. I know it's supposed to be portable but someone told me that external hard drives aren't meant to be taken around like that. Is that true or am I okay? It's just sitting sideways in the bag while I walk/drive, it's not like I'm hiking a mountain and dropping my bag.
    Thanks in advance for all your help.

    321estrellas wrote:
    - I wonder if enclosure manufacturers do special orders of JUST the enclosure without the cables and power adapter? Since I'll likely be buying the same one but plugging one at a time...(maybe one other for another computer)
    Not sure if they will or not. Of course, IMO, it is not bad to have an extra Power Adapter and cables (or more), just in case. You would be suprised how things can get misplaced or when you really would like another FW or eSATA cable. You can call some of these places and ask, it nevers hurts. I have had very good experiences with Firewiredirect, OWC/MacSales and Wiebetech, probably worth a customer service IM window with them or call or email. Worst they can say it is not possible.
    - Alternatively the Wiebtech SilverSata I enclosure seems pretty convenient and maybe I'll expand it with 6-8 additional trays...but again I may want to use another HD in another computer but I'm sure I can figure a way around that...
    If you get a G5 or MacIntel they all use the same drives so if you remove it from a tray you can put it in the computer. I like the SilverSata I because it is relatively small and light and I will often throw a 750gig Drive into a tray when traveling to have a place to capture things and keep copies of photo downloads, audio files for Soundtrack and other files which take up room and a partition for a boot/repair/restore disk for the laptop.

  • How do I force iTunes to recalculate hard drive space?

    How do I force iTunes to recalculate hard drive space? I have 7384 audio files and it says that takes up 262,206.65 GB!

    iTunes has many components.  The two main ones are the application itself (which is what ones means when ones says "iTunes") and the library which is a set of files and folders.  I take it you want to move the iTunes library (you cannot run iTunes the application off a non-boot drive).
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    My one hesitation regarding the above is it sounds like you already have some things on the external drive and you have not shared with us the details of your setup.  You have already modified itunes from its standard behavior and this can sometimes introduce problems.

  • Free hard drive space suddenly increased

    I was in Finder and just noticed that my MBP's free hard drive space increased from ~249GB to 317GB (68 gigs!!) within the past week. I haven't deleted anything major from my computer... Any ideas why this might have happened? Is there a way I can find out what may have been deleted?

    If you use Time Machine, it's probably OSX deleting expired "Local snapshots."   See #30 in Time Machine - Frequently Asked Questions for details.

  • IMovieHD won't release hard drive space

    I had a 13 Gb project in iMovie HD and I didn't need most of the content, so I deleted most of the video content, roughly 10% remains. But the project size only went down to 11 Gb. I emptied the trash from within iMovie, no change. No change after reboot. Save-As gives a new project the same size.
    Will this project ever give me back the hard drive space?

    Hi
    This is a very basic question.
    You are using a NON-destructive movie editor.
    • What You Imported/Captured is stored in one place
    • What You view/edit is just directions from a small document on how this original
    is supposed to be viewed.
    • When You trash a bit - NOTHING is thrown away - at least as long as a single frame
    is used.
    BUT THERE ARE SOMETHING MUCH MORE IMPORTANT !
    Trash basket in iMovie - near all versions - HAVE one or another BUG
    Please DO NOT - Empty trash basket within iMovie - A true problem maker.
    The trash basket on desktop - No Problem as far as I know off.
    Lesson - Try to Import/Capture about Your needed size - just some +/- 10 seconds
    that can work as edit-handles and everything will run so much better.
    All versions of iMovie and FinalCut are - NON-Destructive Movie editors.
    Yours Bengt W

  • Missing Large Chunk of Hard Drive Space - Pavilion Dv4t

    Hi All,
    I purchased a Pavillion Dv4t about a month ago with a 320 gb hard drive. Upon first inspection, I noticed that the drive partitions, when added together, fell way short of 320gb. The C drive plus Recovery drive = 298 gb! I initially wondered if the missing space was a hidden partition containing vista, and that when I custom installed windows 7, I would be able to formatt that part of the drive to install 7. This does not appear to be the case as the install upgrade only showed the 2 partitions totaling 298gigs.
    Does anyone know what that missing space is and how to recover it? Or is it something important that I shouldent mess with?
    Has anyone else had this problem or noticed that they are missing this much hard drive space?
    Also, I've run a hdd diagnodtic test wich showed no drive issues.
    Thanks!

    Capacity measurements
    A disassembled and labeled 1997 hard drive. All major components were placed on a mirror, which created the symmetrical reflections.
    Raw unformatted capacity of a hard disk drive is usually quoted with SI prefixes (metric system prefixes), incrementing by powers of 1000; today that usually means gigabytes (GB) and terabytes (TB). This is conventional for data speeds and memory sizes which are not inherently manufactured in power of two sizes, as RAM and Flash memory are. Hard disks by contrast have no inherent binary size as capacity is determined by number of heads, tracks and sectors.
    This can cause some confusion because some operating systems may report the formatted capacity of a hard drive using binary prefix units which increment by powers of 1024.
    A one terabyte (1 TB) disk drive would be expected to hold around 1 trillion bytes (1,000,000,000,000) or 1000 GB; and indeed most 1 TB hard drives will contain slightly more than this number. However some operating system utilities would report this as around 931 GB or 953,674 MB, whereas the correct units would be 931 GiB or 953,674 MiB. (The actual number for a formatted capacity will be somewhat smaller still, depending on the file system). Following are the correct ways of reporting one Terabyte.
    SI prefixes (Hard Drive) equivalent Binary prefixes (OS) equivalent
    1 TB (Terabytes) 1 * 10004 B 0.9095 TiB (Tebibytes) 0.9095 * 10244 B
    1000 GB (Gigabytes) 1000 * 10003 B 931.3 GiB (Gibibytes) 931.3 * 10243 B
    1,000,000 MB (Megabytes) 1,000,000 * 10002 B 953,674.3 MiB (Mebibytes) 953,674.2 * 10242 B
    1,000,000,000 KB (Kilobytes) 1,000,000,000 * 1000 B 976,562,500 KiB (Kibibytes) 976,562,500 * 1024 B
    1,000,000,000,000 B (bytes) - 1,000,000,000,000 B (bytes) -
    Microsoft Windows reports disk capacity both in a decimal integer to 12 or more digits and in binary prefix units to three significant digits.
    The capacity of an HDD can be calculated by multiplying the number of cylinders by the number of heads by the number of sectors by the number of bytes/sector (most commonly 512). Drives with the ATA interface and a capacity of eight gigabytes or more behave as if they were structured into 16383 cylinders, 16 heads, and 63 sectors, for compatibility with older operating systems. Unlike in the 1980s, the cylinder, head, sector (C/H/S) counts reported to the CPU by a modern ATA drive are no longer actual physical parameters since the reported numbers are constrained by historic operating-system interfaces and with zone bit recording the actual number of sectors varies by zone. Disks with SCSI interface address each sector with a unique integer number; the operating system remains ignorant of their head or cylinder count.
    The old C/H/S scheme has been replaced by logical block addressing. In some cases, to try to "force-fit" the C/H/S scheme to large-capacity drives, the number of heads was given as 64, although no modern drive has anywhere near 32 platters.
    [edit] Formatted disk overhead
    For a formatted drive, the operating system's file system internal usage is another, although minor, reason why a computer hard drive or storage device's capacity may show its capacity as different from its theoretical capacity. This would include storage for, as examples, a file allocation table (FAT) or inodes, as well as other other operating system data structures. This file system overhead is usually less than 1% on drives larger than 100 MB. For RAID drives, data integrity and fault-tolerance requirements also reduce the realized capacity. For example, a RAID1 drive will be about half the total capacity as a result of data mirroring. For RAID5 drives with x drives you would lose 1/x of your space to parity. RAID drives are multiple drives that appear to be one drive to the user, but provides some fault-tolerance.
    A general rule of thumb to quickly convert the manufacturer's hard disk capacity to the standard Microsoft Windows formatted capacity is 0.93*capacity of HDD from manufacturer for HDDs less than a terabyte and 0.91*capacity of HDD from manufacturer for HDDs equal to or greater than 1 terabyte.
    click Kudos to say thanks if I helped

  • Adobe PSE hard drive space

    I am in the process of moving pictures (using Move in Windows) from my hard drive to an external hard drive. When completed there is still an image of the picture remaining in Adobe PSE which is not connected. I have not removed in from the catalog yet.
    My question is, is this image a duplicate copy of the original? If not what would be the hard drive space it is taking up relative to the original?
    Please note this is not my Backup, but am using the external drive to store files I seldom will be using.
    Thank you
    Harv

    I am in the process of moving pictures (using Move in Windows) from my hard drive to an external hard drive. When completed there is still an image of the picture remaining in Adobe PSE which is not connected. I have not removed in from the catalog yet.
    My question is, is this image a duplicate copy of the original? If not what would be the hard drive space it is taking up relative to the original?
    You most definitely should not be using Windows to move photos that have been imported into the Organizer. This disconnects the photos. You will not be able to do anything with the photos from Organizer until you reconnect them. There are several ways to reconnect the photos. Once you fix this problem, you should only use the Organizer to move your photos from one disk to another. Use folder location view (alt-ctrl-3) to do this.
    Your photos are not, and never were, in the Organizer.  They exist on your hard disk, and Organizer contains a pointer to the  actual photo. The photo you see in the Organizer is a small thumbnail, not your original photo, which remains on your hard disk wherever you put it. The thumbnail takes up only a very little space.

Maybe you are looking for

  • Issue while parsing the MYSAPSSO2 Cookie

    Hi All, We are trying to establish SSO with a non SAP web application using MYSAPSSO2 cookie. Plan is to write a java class which can parse out the MYSAPSSO2 cookie, extract the user Id and use it for single sign on. Following Libraries are used: log

  • How can I delete an email personality that I no longer use

    I have been accessing several different email addresses that I no longer use. How can I delete those email personalities from Thunderbird

  • Unable to set property Refresh Completed Items for UWL system

    Hello Experts, We are on NetWeaver 7.40 SP2 and UWLJWF version is 1000.7.40.2.0.20130411234700. We have configured a system object with system alias SAP_ECC_HumanResources pointing to the backend ECC system. I am creating a UWL WebFlowConnector syste

  • Clock is wrong after reset

    The clock on my computer resets to about 5 hours ahead of the actual time every time I restart. As soon as I open the Date and Time prefpane it corrects itself, but it's still a problem. I'm thinking it may be a hardware issue because my Vista instal

  • Midi sync my Fantom x8 with logic

    Ok...hello everyone, ive been breaking my head on this one....I have my fantom connected to logic via Mbox2(midi out on the fantom is going to midi in on the mbox and midi out of the mbox is going to midi in on the fantom) and I can record MIDI comin