Quickly and repeatedly clicking a button

I want to set a button up so it is activated and it's
function runs completely before it can be activated again. I have
tried a ton of things, but I can't get it to survive multiple
clicks. The swf does everything great so long as I click slowly but
kids are going to use this and they will be clicking like crazy. I
need a very basic example of how to set up and event listener and
it's associated function such that the FLV player associated with
it can change it's source and be ready to play the new source file
before the source can be changed again by the next button click or
better still only one button click is allowed until everything is
ready to play and any other button clicks are disreguarded.

One method might be to disable the button that was just
pressed, then test the Paused or Playing constant of the
FLVPlayback.state property. The player will enter one of these
states after the file is loaded. When you get this state then
enable the button again.

Similar Messages

My iPod Touch 3G 32GB from 4.2.1 to 4.3.2 cannot play the audio of videos when it's hold and after clicking Home button twice to play audio of the video,why?

When I hold down my iPod Touch 3G 32GB with 4.3.2 I can't play the audio of the video neither clicking play when it's hold why?

It's a limitation from 4.2.1 for iPhone 3GS and iTouch 3G and not for new devices as iPhone 4, iTouch 4G and iPad 2?

When I open Firefox, the screen opens normally; after about 1 second, it shows a slightly different look and a "click me" button. is this a virus?

I can add a screen shot if needed.

No it is a not a virus if your homage is the default '''about:home'''
This explains what it is
https://blog.mozilla.org/blog/2014/10/14/play-awesome-indie-games-directly-in-firefox-including-the-award-winning-ftl/
This shows how you can change your Homepage in Firefox to something else or blank if you prefer. https://support.mozilla.org/en-US/kb/how-to-set-the-home-page

I have forgotten my answers to my security questions and I have clicked the button to send an email to reset my answers but I have not gotten the email for it. Is there another way I can reset my answers?

Can someone please help me I would like to buy music and have clicked the button to reset it more than once and I still have nothing.

Going through this website may give you the ability to contact Apple about resetting your security questions if you're unable to recall the answers.
http://www.apple.com/support/itunes/contact/

ICal Crashes when clicking "calendar" button to show available calendars

After doing the Lion upgrade I've troupbe with iCal. iCal just opens fine - but when trying to access "calendar" button it shows no reaction at all. In some cases a popout callout appears which is empty (and does not show one single calendar out of my existing 10). If I repeat clicking the button iCal crashes.
Any help is highly appreciated.

BusyCal is not at the root cause - it has s.th to do with the user account. As described in an other post you can fix it by deleting the prefs of iCal:
https://discussions.apple.com/message/15709996#15709996
When it comes to BusyCal there is only one thing with Lion that might be unexpected. Lion fires off iCal each time iCal receives a Push from Mobile Me. In practice you may add an event to BusyCal and iCal will be started immediately. Same for notification. The only way to get rid of this is to change iCal update interval from push to s.th. different. Unfortunately Apple limited Mobile Me Push to iCal only. Other Apps have no access to..
Almi

Event handling while changing the value or clicking the button

Hi All,
I am working on Jdeveloper 11.1.1.5.
I have a must requirement where i have a textbox and a button.
Now if a user changes the value of the textbox then i need to show a dialog to the user for the confirmation that whether he wants to continue or not.
And on click of button i execute my business logic and commit in the database.
NOTE :- I am opening that dialog on the valueChangeEvent of the textbox.
Case 1 :-
User enter a value in the textbox and tab out the field , value change occurs and dialog displayed onto the page. -> CORRECT
Case 2 :-
User enter a value in the textbox and does not tab out the field and directly click on the button.In that case , actually valueChange and button code both executes at the same time.I mean to say , the user click on the button , i get the dialog , but my business logic also gets executed. -> INCORRECT(ISSUE)
How should i restrict the button logic to be executed till the dialog has been shown and user has confirmed.
Kindly suggest!!!
Regards,
Shah

Hi Shah,
You can try something like this:
<af:inputText autoSubmit="true" id="it1" ...>
<af:setPropertyListener from="true" to="#{viewScope.uncommittedData}" type="valueChange"/>
</af:inputText>
<af:commandButton partialTriggers="it1" disabled="#{viewScope.uncommittedData ne 'true'}" .../>AP

Add rows in app on click of button

HI
I am new to Apex and PL/SQL. I am developing an application in which i need following things to be done.....I have created a FORM(not a report) in which there are fields ,
'F1' a select list,'F2' a display only field,'F3' Number field,'F4' Display Only…. arranged in one row.Also there is a Button 'Add Item'.
Procedure:
When user selects item from the select list i.e. field F1...its quantity is displayed in field F2(a spec. Number)...after that user must enter a number in field F3 which should be less than number in F2....as soon as user enters number in F3 there should happen a calculation (No. form F2 - No. from F3) and the result should autopopulate in field F4........after that when user clicks on 'Add Item' button..a row containing fields F1,F2,F3,F4 should be added just below the 1st row.
1. For the calculation part, where shall I write the code? do i need to create a validation or a dynamic action......
2.Please help me with the 'Add Item' button ...I really dont have any idea how a row will be inserted when i click on the button
any suggestion/logic/sample code/link to existing example are welcome...
THANKS

Thanks vincent....i now have a Form called 'Form on table/view' but i am stuck here
Ill explain the problem in detail to you
On the above form i have following fields,
Product_name(link),Total_ordered_qty now these fields are displayed here from table Product_list
Step 1:
when user clicks on product_name, user navigated to a page where there are following fields
Item name(auto populate from product_name),ordered qty(auto populate from total_order_qty),Inspection_qty(user i/p),Remaining_qty
Step 2:
when user gives some number as 'Inspection qty' a java script calculates (Total_order_qty - Inspection_qty) and auto populates 'Remaning_qty' field and will click 'Proceed' button
Now,
I want that, on click of Proceed button a record created in Step 2 should be inserted into some table so that i can keep the track of updated record. Also if Total_order = 500 and Inspection_qty = 200 then Remaining_qty = 300 this value should get updated in Product_list table. i.e. if user logs in for the 2nd time he will see Ordered_qty = 300 in Step 1.
Now this updated record..i want to show this under a Tracking tab so that user can see his activities.
Do i need to write a trigger to insert a record? if yes then where to write it? or there is any other way?
Also how am i going to calculate and display the updated values from step 2 in step 1?
any suggestion/logic/sample code/link to existing example are welcome...
THANKS

Playing basic sound ( *.wav ) through a click of button ?

Hi Java experts:
Need to know the Java code to be added to a click button 1 to play sound ( *.wav ) and the code to stop the sound through and other click of button 2.
Using a normal applet
Thank you in advance
M C Benzerari

See...the scenario is something like this : I have a main application running into a JFrame instance. Now, from a menu item in this JFrame, I have opened the modal JDialog. And from this modal JDialog, I have created a JFrame. Now I am not able to focus and perform any operation on this JFrame unless I close the JDialog from which it was created.
Please suggest some workaround so that without closing the JDialog, I am able to fire some event from the JFrame which is being created from this modal JDialog.
Thanks,
Gauri

Where is the option to see a drop down of past pages visited and go to one of those, instead of having to repeatedly click the "back" button?

In other browsers, and previous versions of firefox, there was a drop down list of previously visited pages accessed by clicking a down arrow, where is this feature?.... without it, you are forced to repeatedly click "back"....and also some pages will not allow you to retreat, so to speak..so with the ability to go back more than one page at a time, you can get out of there.....where is that option, and why is it not there?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Are there any plans to move the "Math Check" to AFTER the O.K. BUTTON is pushed on STEP AND REPEAT?

One of my pet peeves is that I have to clear all the fields in the STEP AND REPEAT dialouge box before I can begin entering information. I have been patiently waiting for this bug to be fixed. I am beginning to wonder if Adobe is even aware of the bug? It drives me nuts to no end!!! I am sure it is responsible for several points in my blood pressure reading on given days. I'll have an object selected that I need to step 7 times and I'll bring up the Step and Repeat dialouge box. I'll enter 7 in the COUNT field. InDesign will in some cases immediately flag the operation as not possible because there are numbers in the other two fields that I haven't had a chance to edit yet that will cause the step and repeat operation to go off the pasteboard. It makes me MAD because it changes my 7 back to a 1 and I have to go and put in the correct values for the VERTICAL and HORIZONTAL offset fields and then I have to go back up to the COUNT field and re-enter my 7. All of this and I haven't even hit the O.K. button yet!!! Can someone at Adobe pleeeeeeaaaaaase inform the programmers of this glitch and have them move the MATH CHECK to AFTER THE O.K. BUTTON is clicked! I wouldn't mind the message if the figures I entered were incorrect and I had hit the O.K. button. But it drives me absolutely insane when it starts trying to correct me before I've even finished entering my values!
Am I the only one?
I would love to hear from anyone else out there that gets frustrated from this. If for no other reason then to let me know I haven't completely lost my sanity yet.
Thanks.
Randy

O.K. Peter. I did go and file a report. I couldn't bring myself though to call it a feature request because I clearly believe it is a bug. A co-worker of mine and I had a long discussion about it. He argued your side of things suggesting that the program was working as the programmers intended for it to be and because of that I couldn't call it a bug. But, I contend that the program IS NOT working as the programmers intended for it to be because if you look at the OBJECT > TRANSFORM > MOVE item in InDesign it also brings up a dialogue box. This dialogue box also has a PREVIEW check box on it. If the PREVIEW check box is checked then it immediately evaluates the numbers as you enter them into the various fields. And if you enter an invalid number it will immediately present the error message. However, if the PREVIEW check box is left unchecked then it waits until you press the O.K. Button before evaluating the numbers and executing the move. The STEP AND REPEAT dialogue box should behave the same way but it doesn't. It behaves as if the PREVIEW check box is checked whether it is or not. So that is a BUG in my humble opinion.
Thanks for your help in pointing me to the correct form. I'm usually so busy working that I never have time to look that kind of stuff up.
Randy

After updating to v. 24.0 (and restarting) ALL add-ons (regardless whether they work or not) are marked "(disabled)", and clicking Enable button does nothing

After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"

You're welcome
Are this screenshots from an extension window because the built-in about:addons page looks different?

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

I downloaded IOS6 and all my apps, including the App Store icon, disappeared. If I go to the Passport icon, there is an App Store button, but I have to search through all the apps to find the one I want and then click on "Open" to use it. Help!

I downloaded IOS6 and all of my app icons, including the App Store icon disappeared. Now to use an icon, I have to go to Passport and click on the App Store button at the bottom and search through all of the apps to find the one I want and then click on Open. There doesn't seem to be a way to delete the app and start over.

Hey PlayerPS,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the application you are looking for is indeed still on your iPhone. You can confirm this by searching in the Spotlight Search for this application. It may have accidentally been moved to a folder, or an additional Home screen:
iOS: Understanding Spotlight Search
http://support.apple.com/kb/HT3636
via http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks,
Matt M.

My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: chrome://tavgp/content/libs/include.js:595"
How do I solve these issues???

No idea - and you provide no clues
what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
Somehow my "IPhoto" icon now says "Preview". When I click on "Preview" nothing opens up except the bar says Preview. When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there. The only thing that work is the "quit preview". However, it is still there where my IPhoto icon should be. I can't get into my IPhoto. How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
If you go to your Applications folder and double click on iPhoto what happen?
LN

Unable to close open apps with double clicking the button and when I tap screen does not respond?

Cannot not close open apps with double clicking the button Since downloading iOS8.

What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

Quickly and repeatedly clicking a button

Similar Messages

Maybe you are looking for