QuickTime 7 installation error - cannot install

I'm trying to install Quicktime 7.65.17.80 onto a Windows XP SP3 machine. After selecting the installation options (installation directory/desktop icons/check for updates) the installer gives me the following error:
"The installer encountered errors before the requested operations for QuickTime could be completed. To retry these operations at a later time, please run the installer again."
There are no error numbers or any other information to try and troubleshoot this message. The event viewer gives me the following:
"Product: QuickTime -- Installation failed."
I have followed KB Article HT1926.
K-Lite Codec Pack was installed. It has since been uninstalled and the system rebooted.

Many thanks for the excellent description of the problem.
I have followed KB Article HT1926. ... K-Lite Codec Pack was installed. It has since been uninstalled and the system rebooted.
It's not an especially easy error message to troubleshoot. I want to first try following up on some possibilities that aren't covered in the standard document.
Do you still have Windows Installer CleanUp installed? If so, launch that again ("Start > All Programs > Windows Install Clean Up"). *Don't remove anything at this stage.* We're just having a look.
I presume there are currently no entries listed in there for iTunes and QuickTime. But are there any entries listed in there for either the K-lite codec pack, or QuickTime Alternative?
If there's nothing in there for QuickTime alternative of the K-Lite pack, let's check on a more exotic possibility.
Can you see any entries in there that lack a name, but do have a version number (in square brackets)? If so, what version numbers do you see?
(Best not to include the square brackets if you post back with version numbers. The forum software autoformats stuff in square brackets into a hyperlink. Harmless, but disconcerting if you aren't expecting it.)
(Don't remove any of those, either yet ... there's some msi files relating to SP3 (I think) that appear like that. We don't want to touch those.)

Similar Messages

Installation Error: Cannot Install Photoshop

I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4
Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. How do I fix that? I'm just trying to install the trial...

Okay I got it to install but I am getting this message about not having having VersionCue.DLL installed. I don't have it in the directory it's specifying, but I can't seem to find it online either. If can run my adobe programs just fine, but when I try to go to like my ITunes or My Downloads, it gives me this message.
Any ideas how I can fix it? I really don't want to uninstall everything. I have already done that so many times. I read an article written by Adobe that said essentially they don't know what the crap is goin on. Which I found real reassuring.

Quicktime installation aborted; cannot install due to errors....

I have a new computer, Dell Inspiron 530 Dual core 2, running Vista. I have been trying in install Quicktime but receive the error "Another installation is in progress, etc etc." I cannot find the conflict but I am wondering if my Windows Visual C++ 2005 program is corrupted. This computer will not let me download or repair that program, it will not let me install Quicktime or Google Earth or ...
Can anyone help me?

And bump again, do I not deserve support or something? I brought the iPhone 4, surely I should be entitled to actually use the **** thing?

Installation error: cannot find the data source checking utility (dbcheck)

BO XI 3.0:
During the process of installing "Dashboard and Analytics Servers", we've got this error.
Installation error: cannot find the data source checking utility (dbcheck)
Have anyone encountered this issue? We can't move on after this error.
Thanks,

I've fixed the problem.
Lianjun.
Lianjun (guest) wrote:
: I've tried to run the latest beta version of OMWB to migrate
from
: MS SQLSERVER7.0 to Oracle8i. At step 4:Source Database Details,
: every time I put in the data source name (which is in the
control
: panel-ODBC data source Administrator), it gave an error message
: that Data source name not found and no default driver
: specified).Anybody has any ideas?
: Thanks for the help!
: Lianjun.
null

Installation error while installing SAP NetWeaver ABAP Trial Verion 7.02

Hello,
I am getting the following installation error while installing SAP NetWeaver ABAP Trial Version 7.02 (90 days evaluation)
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Below are the details of my system:
OS: Windows 7 Enterprise Edition (version 6.1.7600)
Processor: Intel(R) Core(TM) i5
System: 64-bit Operating System
Regards,
Tarun

hello,
I am getting the below error while intsatlling
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed: Unable to create node
cyber7be\sapmnt\ with type DIRECTORY: can't create parent node...). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
os--windows xp-sp3. 32 bit
please help
thanks in advance
Edited by: sumzi_ks on Aug 27, 2011 4:09 AM

Libtool: install: error: cannot install

I seem to be having all the luck recently. Any suggestiosn for this one?
test -z "/opt/qgis/lib/qgis" || mkdir -p -- . "/var/abs/gis/qgis/pkg/opt/qgis/lib/qgis"
/bin/sh ../../libtool --mode=install /bin/install -c 'grassplugin.la' '/var/abs/gis/qgis/pkg/opt/qgis/lib/qgis/grassplugin.la'
libtool: install: error: cannot install `grassplugin.la' to a directory not ending in /usr/lib/qgis
make[4]: *** [install-pluginLTLIBRARIES] Error 1
Obviously it is the /usr part that is killing it

Try running libtoolize -f on the source as first thing to do in the build() function in the PKGBUILD. I've seen many broken libtool scripts in tarballs around, especially on gnome ones (packages using libblabla.14 instead of libblabla.so.14 for example )

Installation error: Cannot find a J2SE SDK installed at path C:\Program Fi

I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
C:\Program Files\Java\jre1.5.0_10
I am installing the version I downloaded for Windows systems with JDK1.5.
I have tried on two different machines.
Any ideas?

This is going to seem loooong, but comprehensive.
I'd initially always suggest using the bundled
package, since that's supposed to be a tested and
proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
After having problems with a graphics card for
example, installing the latest JDK might be
indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
It's also easy for users who don't know which Java
version to download, or even where to find it! You
guys have proven that: although it's stated you need
.First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
"JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
And given users might have several versions running
on the same machine (I have half a dozen), sqldev
could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
As for being bulky, even without the bundled JDK, it
still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
- Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
- Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
(The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
You say you don't have to bring over the VB runtime
for each app? I remember in the 90's doing it all the
time. Of course, being MS, now that's not necessary
anymore, since it's "magical" Windows. I don't have
any machine from Sun, but for sure they've got Java
bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
Again, I find the most logical difference between JRE
and JDK being the debugger. As you say it yourself:
JRE for end-users, who don't need to do any
debugging.
Now, sqldev is not just a table browser, but also for
debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
Nevertheless, as said in the other thread, if the
team discloses how to circumvent the SDK check at
startup, you can go ahead and use the JRE. In any
case, you'd have to agree that won't work as
out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

Installer built with Application Builder gives error "Cannot install, higher version already installed"

I am having an issue with an installer which I created with the Application Builder. I have a project that I have successfully deployed. Subsequently I created another project (and vi) which is based on a copy of the originals, both with new file names. In the renamed project file, I changed all file names, paths, and all resources, to reflect the new names. I also changed the installer’s destination and install folders, of course. I reset the executable’s version number (in the Build Specification properties) to 1.0 (the original was 1.3). I then successfully built an executable and the application installer. However, when I run the installer (setup.exe), it gives a dialog (after the license screen) that it “Cannot install” because a “higher version already installed”.
I’ve done exactly the same thing with other vi’s and projects of mine, and never had this issue. The installer correctly installs the newly created (and renamed) version where it is told to in the project file. Also, I’ve never had a problem deploying (installing) on my development PC either.
I have carefully checked and rechecked to make sure there is no reference to the original executable or paths. What could be causing this behavior? I want to keep the two projects completely separate, so simply changing the version to higher than 1.3 is not an acceptable solution.
Thanks to anyone in advance for any help and suggestions.
Ed

Yes, LV 8.5 does NOT give me control over the GUID. In the project file there are three such strings:
"App_applicationGUID"
"App_INI_aliasGUID"
"App_INI_GUID"
They all have different numbers and none of them match the GUID or PackageGUID in setup.ini. I don't know if they are related or not, but usually it's not a good idea to mess with (manually edit) files like these (project, ini, etc.) unless you know what you are doing. (For example, I do edit the setup.ini file to change some of the [Dialogs] parameters, but that is based on direction from NI support.)
Anyway, like I said, I've made copies of projects before and never ran into this problem. At least I have a solution, however laborious, in creating a new project file from scratch.
Let me know if anyone has more thoughts on this.
Ed

Installation error when installing CS6 on Mac?

I keep getting an installation error when I try to install CS6 on my Macbook Pro. It says "installer failed to initialize, this could be due to a missing file". It also shows troubleshooting tips. I have tried them and none of them work. I also tried disc repair and multiple other troubleshooting advice from this site. Nothing has worked yet. Help!

does your macbook meet the system requirements:
Mac OS
Multicore Intel processor with 64-bit support.
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems. Refer to the CS6 FAQ for more information about Mac OS X Mountain Lion support.**
4GB of RAM (8GB recommended)
15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required and second professionally calibrated viewing display recommended for Adobe SpeedGrade
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java Runtime Environment 1.6
Eclipse 3.7 Cocoa version (for plug-in installation of Adobe Flash Builder; the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
Dedicated GPU card recommended (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
if so, attach a screenshot of the error.

Quicktime Installation error message

I have been trying to install iTunes and keep getting the error message "The older version of Quicktime cannot be removed. Contact your technical support group".
I followed some of the instruction from previous posts. I've deleted any file with "quicktime" or "qt" in the name, restarted and tried installing just QT w/o iTunes. Still keep getting this error message. When I tried just installing QT, during the installation I got an error message saying it could not locate the ".msi" file, so I cancelled then got the "older version" message. Any ideas?

When I tried just installing QT, during the installation I got an error message saying it could not locate the ".msi" file, so I cancelled then got the "older version" message. Any ideas?
download and install the Windows Installer CleanUp utility, then use it to remove any existing QuickTime installation configuration information:
Description of the Windows Installer CleanUp Utility
Next, we’ll make sure we've manually removed all leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
now try another itunes install. does it go through properly this time?

Oracle R Enterprise installation ERROR: cannot copy dll file

This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name        ora_dba
Comment         Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME            = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER     = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID      = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
        Group or user names                                    Permissions
        CREATOR OWNER                                          Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control
        Users (Win7\Users)                                     Read & execute, List folder contents, Read
        TrustedInstaller                                       List folder contents, Special Permissions
H:\%ORACLE_HOME% :
        Group or user names                                    Permissions
        Authenticated Users                                    Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control                Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
Sourabh

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
    cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

32bit DIFx Driver Installer Error when Installing 9.0.2

Never had a previous problem with iTunes and when I went to use it this morning, it crashes everytime. Uninstalled completely, reinstalled 9.0.2 and now I get an error "32bit DIFx Driver Installer" and iTunes "finishs" installing and crashes after opening again. Have tried unsuccessfully to figure out a fix for this. All my children got iPod Touches for Christmas and I got a brand new iPod nano and none of us can use them now. Please help!

Hey guys! So, I experienced the same issues with the newest iTunes update. I updated several days ago, but I used iTunes for the first time since the update today. iTunes would load but immediately display a message that it needed to close. After several attempts to open iTunes, I reinstalled QuickTime as suggested by another website. Also suggested was trying to repair QuickTime and iTunes. When that didn't work, I removed both QuickTime and iTunes and did a clean reinstall from new downloads. When I did this, I got the 32bit DIFx Driver Installer error. It "finished" the install, but it still closed immediately upon opening. I ran Malware-Bytes and Hijack This to check for spyware/adware/mal-ware a few days ago so I was fairly certain my system was clean...but after two hours of trying to figure out this problem, I decided to go ahead and check for virus or malware.
Indeed, I found six files (mostly located in the System Volume Information folder). After having Avast remove these files...iTunes successfully installed without the DIFx error! So much for being "sure" my system was clean. The files found were all related to the Win32:Malware-gen virus.
So I suggest you check your system for malware and virus infection. I did my scan in safe mode and did the most in-depth search that Avast will perform. I highly suggest doing a full search with UPDATED virus program even if you think your computer is okay.
I have had no issues with iTunes after cleaning my computer!

QuickTime Installation Error: HKEY_LOCAL_MACHINE\SOFTWA

Hello,
I am trying for the millionth time to install itunes and QuickTime. If I install from the ipod disk, I get error message -3.
If I do it from the QT website, I get error message "Could not open key: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion|Uninstall\QuickTime. Verify that you have sufficient access to that key, or contact your support personnel"
Plese help!!
Thanks

The path your showing is for the registry, and permissions related, from before QT7 probably QT6 is my guess. You might want to try http://support.microsoft.com/kb/290301/en-us and remove any old QT installer configuration. Or if you can, use whatever administrator user account that originally installed QT. Or go into the registry and find who owns the key and take ownership and full control

Installation error while installing KB2956166 march cumulative updates for sharpeoint server 2013

I am getting error while installing KB2956166 march cumulative updates for sharpeoint server 2013 on windows server 2012 R2.
i have already installed KB2956159 CU.
can you guide me what is best way to install it?
Thanks,
Deepak

Hi,
KB 2956159 - SharePoint Foundation 2013 March 2015 CU
KB 2956166 - SharePoint Server 2013 March 2015 CU
http://blogs.technet.com/b/stefan_gossner/archive/2015/03/10/march-2015-cu-for-sharepoint-2013-has-been-released.aspx
If you are using SharePoint server 2013, you need to install updates package for Server, i.e. KB 2956166.
Here is a similar issue:
http://sharepoint.stackexchange.com/questions/104495/undo-wrong-installation-of-sharepoint-2013-service-pack
If it doesn't help, you might refer to this article:
http://blogs.msdn.com/b/george_bethanis/archive/2014/08/28/sharepoint-server-2013-can-you-uninstall-patches.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Installation Error, Cannot find "CrossRef"

I am trying to install Lync 2013 on a new server and I'm having an issue while preparing Forest, this is the error I am getting.
> Prepare Forest
Enable-CSAdForest -GroupDomain dc.emtecsu.com -Verbose -Confirm:$false -Report "C:\Users\......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html"
Creating new log file "C:\Users\.......\AppData\Local\Temp\Enable-CSAdForest-9033ab00-1f99-4ea1-b23d-0ce8218c6c24.xml".
Enable the Active Directory forest to host Lync Server 2013 deployments.
Creating new log file "C:\Users\......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html".
WARNING: Enable-CSAdForest failed.
WARNING: Detailed results can be found at "C:\Users\.......\AppData\Local\Temp\Enable-CSAdForest-[2014_06_18][10_43_04].html".
Command execution failed: Cannot find the object "CrossRef" in Active Directory.

Have you looked at the note on Enable-CSAdForest?
"If you receive the following error, “Cannot find the object ‘CrossRef’ in Active Directory” while running
tasks to prepare a child domain of a single-forest environment with multiple domains, you may have to manually add the RTCComponentUniversalServices group from the parent domain to the Windows Authorization Access group in the child domain." - http://technet.microsoft.com/en-us/library/gg412764.aspx
Also look at a similar thread: http://social.technet.microsoft.com/forums/lync/en-US/868714f4-26f6-4c19-86ff-cc69935b0153/cannot-find-the-object-crossref-in-active-directory
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

QuickTime 7 installation error - cannot install

Similar Messages

Maybe you are looking for