QuickTime error -43 when trying to play a file on the hard drive

I m getting this error while trying to view any quicktime movie saved on my hard disk
the problem doesnt exist if i run the same movie from a cd
please what i should do

I m getting this error while trying to view any
quicktime movie saved on my hard disk
the problem doesnt exist if i run the same movie from
a cd
please what i should do
I've gotten the error when trying to save a QT movie as source or as movie. To get the movie to be saved on disk, I reduce the number of characters in the filename (as if we're stuck using the old MS-DOS with "extended" filenames), and then try again. Shortening the filename usually works.
And if you look at the folder you tried to save the earlier files to, you'll see the filename you originally chose, with a file size of zero KB. Just delete those empty files. (I also superstitiously remove all spaces and punctuation marks in the filename, à la DOS, but have no idea if doing so makes any difference at all.)
The latest version of QuickTime Pro (7.1.5) still generates this error message when I try to save in QT (e.g., the teasers for "This American Life" on Showtime). My guess is that shortening the filename (one letter at a time, if you're scientifically bent) will get you to a filename that QT will be able to handle.
iMac24   Mac OS X (10.4.8)   2GB RAM, 500GB HD, Airport Extreme(n) card, Bose Companion 5 audio, 1.5TB extern

Similar Messages

  • Quicktime error -2048 when trying to play.mov files.

    I have been frustrated this weekend trying to find a solution to a problem that has only recently occurred accessing some digitised VCR tapes that had been archived on an external HDD. These are files that played back fine on my Quicksilver after I had recorded them, but now give a "Movie Not Available" message in Quicktime. However when opened in VLC I get a debug message box with the following information posted below. Any clues as to what might be the problem?
    I recorded the files from my VCR using an ADVC-100 DA converter over firewire into BTV Pro which created .mov files (DV-PAL). When I try to open the files in BTV Pro, I get a message box "There was an error opening the movie. No Movie found. Error code 20,-2048" Did a search for this error and -2048 appears to be a Quicktime error, so am wondering if there is a problem with my installation of Quicktime. I have got all the usual suspects in stalled, Flip4Mac, Perian, VLC. Mpeg Streamclip but can't get the file to open. The external HDD is Mac formatted but I found some info about problems with missing resource forks in older .mov files causing problems if copied to NTFS HDD's.
    Any ideas as to where to look next will be appreciated.
    +main debug: CPU has capabilities AltiVec FPU+
    +main debug: looking for memcpy module: 2 candidates+
    +main debug: using memcpy module "memcpyaltivec"+
    +main debug: thread started+
    +main debug: thread 26421248 (Interaction control) created at priority 0 (../../src/interface/interaction.c:382)+
    +main debug: Creating an input for 'Media Library'+
    +main debug: Input is a meta file: disabling unneeded options+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' gives access `file' demux `xspf-open' path `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: creating access 'file' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for access module: 3 candidates+
    +access_file debug: opening file `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 26.549 ms - Total 26.549 ms / 1 intvls (Avg 26.549 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: creating demux: access='file' demux='xspf-open' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for demux module: 1 candidate+
    +playlist debug: using XSPF playlist reader+
    +main debug: using demux module "playlist"+
    +main debug: TIMER module_Need() : 19.485 ms - Total 19.485 ms / 1 intvls (Avg 19.485 ms)+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' successfully opened+
    +main debug: looking for xml module: 2 candidates+
    +main debug: using xml module "xml"+
    +main debug: TIMER module_Need() : 99.281 ms - Total 99.281 ms / 1 intvls (Avg 99.281 ms)+
    +playlist debug: parsed 0 tracks successfully+
    +main debug: removing module "xml"+
    +main debug: EOF reached+
    +main debug: control type=1+
    +main debug: removing module "playlist"+
    +main debug: removing module "access_file"+
    +main debug: TIMER input launching for 'Media Library' : 71.406 ms - Total 71.406 ms / 1 intvls (Avg 71.406 ms)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 25213440 (preparser) created at priority 0 (../../src/playlist/thread.c:79)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 26413056 (fetcher) created at priority 0 (../../src/playlist/thread.c:108)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 0 items, index -1+
    +main debug: thread 26417152 (playlist) created at priority 0 (../../src/playlist/thread.c:117)+
    +main debug: looking for interface module: 1 candidate+
    +main debug: using interface module "hotkeys"+
    +main debug: TIMER module_Need() : 48.316 ms - Total 48.316 ms / 1 intvls (Avg 48.316 ms)+
    +main debug: thread started+
    +main debug: thread 25212416 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main debug: looking for interface module: 17 candidates+
    +main debug: using interface module "signals"+
    +main debug: TIMER module_Need() : 34.354 ms - Total 34.354 ms / 1 intvls (Avg 34.354 ms)+
    +main debug: thread started+
    +main debug: thread 26470400 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.+
    +main debug: looking for interface module: 4 candidates+
    +main debug: using interface module "macosx"+
    +main debug: TIMER module_Need() : 511.368 ms - Total 511.368 ms / 1 intvls (Avg 511.368 ms)+
    +main debug: thread started+
    +main debug: thread 26482176 (interface) created at priority 0 (../../src/interface/interface.c:148)+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: adding item `testing.mov' ( /Volumes/IR My Book/BTV Videos ƒ/testing.mov )+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 1 items, index -1+
    +main debug: starting new item+
    +main debug: processing request item testing.mov node Playlist skip 0+
    +main debug: resyncing on testing.mov+
    +main debug: testing.mov is at 0+
    +main debug: creating new input thread+
    +main debug: Creating an input for 'testing.mov'+
    +main debug: waiting for thread initialization+
    +main debug: thread started+
    +main debug: thread 26771456 (input) created at priority 22 (../../src/input/input.c:370)+
    +main debug: `/Volumes/IR My Book/BTV Videos ƒ/testing.mov' gives access `' demux `' path `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access_demux module: 2 candidates+
    +main debug: no fetch required for Playlist (art currently (null))+
    +macosx debug: input has changed, refreshing interface+
    +macosx debug: notification received in VLC with name VLCOSXGUIInit and object VLCEyeTVSupport+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: TIMER module_Need() : 1288.828 ms - Total 1288.828 ms / 1 intvls (Avg 1288.828 ms)+
    +main debug: creating access '' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access module: 8 candidates+
    +vcd debug: trying .cue file: /Volumes/IR My Book/BTV Videos ƒ/testing.cue+
    +vcd debug: could not find .cue file+
    +access_file debug: opening file `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 110.747 ms - Total 110.747 ms / 1 intvls (Avg 110.747 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: pre-buffering done 1408981 bytes in 0s - 9031 kbytes/s+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for demux module: 59 candidates+
    +mp4 debug: found Box: mdat size 32+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: found Box: mdat size 18891508192+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: dumping root Box "root"+
    +mp4 debug: | + mdat size 32+
    +mp4 debug: | + mdat size 1711639008+
    +mp4 debug: file type box missing (assuming ISO Media file)+
    +mp4 error: MP4 plugin discarded (no moov box)+
    +avformat debug: detected format: mov,mp4,m4a,3gp,3g2,mj2+
    +avformat error: avopen_inputstream failed+
    +lua debug: Trying Lua scripts in /Users/irdesigns/Library/Preferences/VLC/lua/playlist+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/anevia_streams.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/appletrailers.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/bbccouk.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/break.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/canalplus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/cue.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/dailymotion.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/france2.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/googlevideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/joox.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/koreus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/lelombrik.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/megavideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/metacafe.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube_homepage.lua+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/share/lua/playlist+
    +ps error: cannot peek+
    +vobsub debug: could not read vobsub IDX file+
    +dummy error: unknown command `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +subtitle debug: subtitle demux discarded+
    +main warning: no demux module matching "mp4" could be loaded+
    +main debug: TIMER module_Need() : 1954.294 ms - Total 1954.294 ms / 1 intvls (Avg 1954.294 ms)+
    +main error: no suitable demux module for `/:///Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: finished input+
    +main debug: dying input+
    +main debug: removing module "access_file"+
    +main debug: thread ended+
    +macosx debug: input has stopped, refreshing interface+
    +macosx debug: addition to non-blocking error panel received+
    +main debug: dead input+
    +main debug: thread 26771456 joined (../../src/playlist/engine.c:244)+
    +main debug: TIMER input launching for 'testing.mov' : 3573.150 ms - Total 3573.150 ms / 1 intvls (Avg 3573.150 ms)+
    +main debug: starting new item+
    +main debug: changing item without a request (current 0/1)+
    +main debug: nothing to play+
    +main debug: no fetch required for Playlist (art currently (null))+

    Well it used to work fine so I think so. When I try and run the installer you linked to I get a message saying that a later version is already installed- isn't it built into the latest QT releases? One thing I thought of- the original files I think were made on a mac so there were some resource fork files of 4K size. I deleted these as I kept trying to open them by mistake, but then after this trouble I dragged them back out the trash to the original location but it didn't fix the problem- could that have caused some sort of association problem?

  • Error -208 when trying to play midi files

    hey, i used to be able to open midi files no problem, then within the last week or two when I try to open them I get error -208. I know the files aren't corrupt, so I'm wondering why I'm now getting this file error.
    Thanks

    Michael Conniff wrote:
    Saxman
    This is a user to user forum. If you know it is a Quicktime bug, you should report this using the Feedback link (which will get seen by Apple personnel).
    I said I knew for certain that it's NOT corrupted files (because they work fine everywhere else, other programs, my synth, etc.), and I'm only assuming it's a QT bug, because that's what I'm assuming plays them, and the error window shows the QT logo, and says it's a "movie that can't be opened"!
    And I just now sent feedback to Apple, thanks for the link...
    I already said I don't use midi files: so what application should open them? Or do you think it is just QT getting the file type wrong?
    What has happened between them opening OK and the problem? What else has been installed?
    Yes QT is getting the file type wrong, and QT is what I have set to play them, and it does, 70% of the time, no idea why some just won't play...
    The only new thing are the newest updates, as they come down the pike, I don't remember exactly when this began, but it was fairly recently. It could be tied to the QT update...

  • New version of Firefox is hanging when trying to play a file from the BBC iPlayer

    When trying to click on the 'Play' button on the BBC iPlayer site http://www.bbc.co.uk/iplayer/radio/categories/drama, Firefox hangs and does not allow me to click on anything else on any of the open tabs.
    If I use the task master to close Firefox and then try to reopen it, I get a message saying that it is already open. Only restarting the computer will allow me to start it again.

    do some working around, remove the old version, download the latest version from mozilla official, and do the new install, and install the addons. update problems are more than you can think over, so just do a new complete for sure. update sometimes is really time wasting......

  • No matter the website or browser i use. I keep getting this error message when trying to play any video. 'the adobe flash plug in has crashed' I had had theis prolbem well over a month, i have updated flash player and firefox. no change.

    I have sent nearly a hundred crash reports. no change. adobe want money with no guarantee it can fix the problem. no matter the browser or website. the video never plays. I have update virus and anti-spam software. no other error message than the unhappy lego brick with error message stating adobe flash plug in has crashed. I have place a -1 in delay or some config in adobe. No change.

    Hi and welcome to the forums!
    A couple of places for you to visit: Blackberry 101    Tips & Tricks
    See if this kb helps:   http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
    I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM.   Post back and let us know how it goes.
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Error message when trying to play the Youtube video only on Firefox. Is it about regulations or matter of Youtube?

    Ever since Youtube "change casting" (about 6 weeks ago), i can't see anymore a Youtube video even amid other sites or bloggs, with browzer mozilla firefox only (the others do it!!) because all the time sent me an error message when trying to play it. I have downloaded every latest versions of Java, Flash player, Sokwave flash player and i uninstall and reinstall all of them plus the plug ins of Firefox and the Firefox (at the end) when i put the last version 9.1 .I have this problem from updating the v8.0 when mozilla team turn off my java plug in as old (and so many others) but there isn't any new version and i can't uninstall it!.
    Please give me a comprehensive answer to every possible direction. Thank you!

    option-click the video track you want to adjust and drag away or trim away. The audio tracks will remian in place

  • 'An unknown error occurred when trying to play the...

    Hello,
    I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
    Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
    I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
    If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
    Many thanks,
    SHyde

    Sounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • Unknown error occurred when trying to play film clip in Facebook.

    Since the latest update I have problems when I want to watch film clips posted on Facebook.
    This only happens with clips that are shown "in" Facebook, if it's a link to a clip outside of Fb it's not a problem.
    When trying to watch a clip it says, either directly or various times into the clip, "An unknown error occurred when trying to play a film clip".
    if I try over and over again the clip finally plays to its full length but it really annoys me.
    Anybody got an idea?

    We got some reports of this lately and as you say, it only happens in Facebook.
    Try clearing data for the Facebook app under Settings -> Apps and se eif that helps. If not, please see this thread: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Facebook-Videos-not-playing/m-p/727861
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Quicktime crashes vista when trying to play .mov

    Hi all,
    When trying to play .mov files with quicktime it instantly runs very slowly and then I get the blue screen of death and the system crashes. I can play the same .mov files in window media player, no problems. I was just wondering if anyone had found this and if there were any fixes. I have re installed quicktime which is the latest version. The Laptop has 3gb RAM a 2.4ghz Celeron and runs very fast with everything apart from quicktime. Its only a week old and has done this with quicktime from the start.
    Thanks

    Okay, let's go digging.
    1. Download and install the Windows debugging tools from here:
    http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
    2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
    Once you open Windbg, you will presented with a blank screen.
    3. Click on "File > Symbol File Path". Here you will enter the symbols
    path. Symbols are needed to effectively debug.
    The path will be:
    SRVc:symbolshttp://msdl.microsoft.com/download/symbols
    4. Enter in this path and click OK. Now, go to "File > Save Workspace"
    so that your symbols path is saved for future use.
    5. Go to "File > Open Crash Dump" and load the file.
    (An "Open Crash Dump" screen will appear ... doubleclick "Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
    *If you get a dialog at this point saying you don't have permission to open the file, try this:* OK out of the permission warning dialog. Right-click on the minidump file (In the "Open Crash Dump" screen), and select "Properties". Click the "Security" tab. Click the "Advanced" button. Click "Continue". Check the "Include inheritable permissions from this object's parent" checkbox, and click OK. Click Yes when the Windows security box comes up. Close the "properties" screens at this point, and go back to "Open Crash Dump", and try doubleclicking on the minidump again.
    You will/should get a message to save base workspace information. Choose no.
    Now you will get a debugging screen. It takes a little bit to run it,
    as the symbols have to be downloaded as they are needed.
    After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash.
    Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
    If you can, have a look at several of your nine crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • I get an error message when trying to sync my reset ipod "The iPod ...cannot be synced. A duplicate file name was specified."

    i get an error message when trying to sync my reset ipod "The iPod ...cannot be synced. A duplicate file name was specified."

    Locate the photos folder which is selected for syncing with the device and delete the folder iPod Photo Cache inside.
    tt2

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • When trying to remove a partition on my hard drive I couldn't

    when trying to remove a partition on my hard drive I got an error and the option was grayed out in boot camp assistant. error message:  "The startup disk cannot be partitioned or restored to a single partition.  startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Window".

    I am going to revise my question to this.  If I compress my itunes folder which would save me a considerable amount of space will this make the music and apps information stored in there unsyncable? 

  • Getting error message when trying to play songs from library saying original file could not be found

    when trying to play songs from library, getting message saying original file could not be found .. my full library all says the same .. can anyone help ?

    Hello Ceeclass,
    I suggest this article named iTunes: Finding lost media and downloads found here http://support.apple.com/kb/TS1408.
    It should help you locate the media that is not playing in the iTunes library.
    Take care,
    Sterling

  • When trying to play videos I get the message "requested URL is not supported on this network" how do I fix this?

    I receive the error "requested URL is not supported on this network" when trying to play videos on my iPhone. Can you please advise how to fix this problem?

    Hi,
    You will need to re-instal iCal as an optional install from your OSX installer DVDs. Then run the Mac OS X 10.5.8 Combo Update.
    Best wishes

Maybe you are looking for