Quicktime errors with .mov's captured in premiere. HELP!

I captured video through Adobe Premiere CS3 to a FAT32 external. It stopped twice during capture before I changed it to capture to the computers internal HD. I went back to retrieve the files that had stopped during capture. and the .mov files cannot be opened by anything. VLC says "no moov box" and quicktime says it's a filetype that it cannot understand.
i've captured countless times through premiere and this has never happend. is there a way to repair the files, convert them, etc? help please.
-Chris

Chris -
You don't want to be capturing video to a FAT 32 drive in the Mac world. Your QT wrapper didn't make it all the way around the file - probably because of a 2gig limit.
If you are going to continue using this drive for scratch video drive remove everything, reformat to MAC OS Extended and re load. Capturing to your internal system drive isn't the best either, as you know.
Good luck,
CaptM

Similar Messages

  • Updated document about QuickTime errors with After Effects (re: H.264 and hyperthreading)

    I just updated "troubleshooting QuickTime errors with After Effects CS5, CS5.5, and CS6" with information about hyperthreading and Apple's H.264 encoder.
    The gist is that Apple's H.264 exporter component for QuickTime fails when the computer has a large number of CPUs.

    No, this applies to any QuickTime H.264 export. You can export H.264 in a QuickTime .mov wrapper out of AME, too, and it will have this problem.
    The various H.264 encoding presets (for YouTube, Blu-ray, Vimeo, iPad, etc.) don't use the H.264 QuickTime component, so this isn't relevant to them.
    This problem is just relevant to choosing Apple's H.264 as the video codec when choosing QuickTime as a format. This applies to all software that uses QuickTime, by the way, not just Adobe software.

  • What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

    What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

    Can you give more details?   What exactly is the entire error message text?  there should be an error number too.   Are you trying to finalize this to an external disk?

  • MB1B error with Movement type - 411 / E

    Hello MM Sapperu2019s,
    I have an issue in transaction MB1B where I need to move the sale order stock to unrestricted with movement type 411 /e I am getting the error,
    Dlv. type (dlv. catgry OD for mat. XXXX and BWART 411) cannot be determined
    Message to Moderator,
    I believe this issue has been discussed earlier in SDN but not with similar to my case. Hence not to close my thread as it has been disused earlier.
    I also refer the below links but couldnu2019t able to find the detailed root cause for my issue.
    Error in MB1B posting (Issue is related to 411/Q)
    Delivery Type cannot be determined in subcontracting (Issue related to Subcontracting)
    Also I have referred the OSS notes and my observation are as below,
    1238654 which has been mentioned by Jurgen and observe this is not relevant to my case as we are using the standard Ware house.
    540185 which has mentioned by kuberk and identified table T156Q is perfectly maintained.
    Hence please help me with your valuble inputs to identify the detailed rootcause for my issue.
    Br
    Kumar.S

    Dear Kumar,
    Can you tell me the exact error number like VF569........ please.
    So, I'll able to tell you exactly......
    Thanks
    Farrukh khan

  • HT4436 my massage alway give error with the server try again later help

    someone know how strigh forward reset massage and fix error with the server????
    help

    See http://support.apple.com/kb/TS3970?viewlocale=en_US&locale=en_US - maybe it can help solve your problem.
    Clinton

  • Error with movies in Quicktime

    I cannot see any movie in this computer. I've played them in another mac and they run well. They are in .avi and my quicktime only says that there is an error and that i might need to downoad something from the quicktime page but it does not say what.
    The screen is just white when it opnes and also when a click play.
    Has anyone had this problem?
    MacBook Pro   Mac OS X (10.4.9)  

    To The Apple Discussion Boards!
    Open the file with QuickTime Player.
    Open the Movie Info window (Command-i).
    Note the name of the video codec used in the file.
    Do a Google.com search for codec name +Mac and download one appropriate for your OS and computer.
    Quit and relaunch QuickTime after installing the new codec.
    Try the file again.
    Thanks to QuickTimeKirk for the above info.
    If the above does not work try VLC Media Player and/or Perian.

  • Quicktime not playing .mov videos captured with my iPad2

    I moved some videos that I took with my iPad to my macbook pro, but quicktime will not play them (.mov files). What's the deal?

    On the camera and after the transfer from camera to computer the files ended in .tod, as they always have. I had originally exported them into H.264, but the video quality was fairly shotty compared to what I typically get when exporting to .mov, and I really need the better quality. My biggest question is really why QuickTime will not play the converted .mov files now when it used to. What's the deal with it?
    You say you are exporting to MOV. However, as QTKirk previously pointed out, MOV is a file format and not a compression format. So we still have no idea what video format you are converting to when you select the "Export to QuickTime" option. If you are using the default MPEG Streamclip video compression format for this export option, then you are converting the TOD file video to the Motion JPEG A compression format. Although I do not have a problem using it, according to the Apple Web Site, Motion JPEG is supported by Snow Leopard but no longer natively supported by Lion.

  • Quicktime error with P2

    Since importing P2 footage into FCP, whereas it's created new .mov files in my capture scratch folder, I canot open the new HD .mov files with just quicktime. Any thoughts?

    Just found a work around. Disabling the Windows Firewall lets me install itunes 7.1.
    cfelix

  • MIGO Goods Receipt - error with Movement Types on GR from Inbound Delivery

    Hi,
    I am getting an error message when processing a Goods Receipt (MIGO) against an Inbound Delivery with as 2 lines with different movement types, a standard 101 and a 970 (the latter being a user defined movement type for free goods).
    The error message I get is 'Movement type 970 is not allowed; only 101 is allowed
    Message no. BORGR622'
    This error message only occurs with a Goods Receipt against an Inbound Delivery, we are able to process a similar Goods Receipt using MIGO against a Purchase Order, with two different movement types 101 and 970, without any issues. 
    It is only a problem with a GR against an Inbound Delivery which is necessary in our MM solution.
    As anybody and ideas how to resolve this?  I cannot see anything obvious in config, and have not spotted any SAP OSS notes either.
    I should mention that we can process a single line Inbound Delivery and Goods Receipt for the Movement Type 970 also!

    Thanks for the reply.  The Price Control Indicator is 'S'.
    The solution was set up at my company before I joined, but the different movement type is to enable the free goods stock to make a Finance posting to a Bonus Stock GL Account.  Bonus stock sale update the same account.
    As I mention the '970' movement type worked fine with Goods Receipt against a Purchase Order (it was coded into to the user exit). 
    The MM procedures were changed to use the Inbound Delivery matched to the PO, this had a result that when the Goods receipt was posted in MIGO it posted as 101 movement, as the PO number was not being recognised.
    By making a further change to the user exit we able to suggest the '970' movement type, but now get the BORGR622 error I refer to.
    '511' is not possible against an inbound delivery either.

  • Error with movie thumbnails in Library module

    Hello!
    I have a Nikon D7000 and I'm having problems with Lightroom's Library module: the preview of the movies doesn't work, I'm getting an error. I'm attaching a screenshot. Could this be fixed before Lightroom 3.4?

    Hallo Bhavya,
    Please do not post like this as it is not readable . Mostly when you describe it in a simple manner you would get more response.
    See this thread for answers from Thomas Jung [Re: Approach content repository other way then URL approach|Re: Approach content repository other way then URL approach]
    Wiki [http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass|http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass]
    Edited by: Baskaran Senthivel on Dec 22, 2010 2:42 PM

  • Errors with movies or podcasts

    I keep getting errors when opening iWeb, such as couldn't load bundled movie. This also happens with some (but not all) podcasts that I share from GarageBand to iWeb.  I fix the errors and publish, but the next time I open iWeb, the errors are there again. I have fixed the errors a couple times now, but any time I launch iWeb, those same errors are back. 
    I'm using iWeb 3.0.4 on my MacBook Pro. I would appreciate any help.
    Thanks!

    Perhaps try Chargedneuron's suggestion with that:
    http://discussions.apple.com/message.jspa?messageID=12758546#12758546

  • Download errors with movie rentals

    I have a 32 GB iPAD with almost nothing loaded up yet. I tried to download two movies directly on to my ipad via the itunes store app on it. The movies started downloading until they suddenly stopped and it says on my ipod "download error tap to retry" . I retried it and it did the same thing so i waited a couple days and retried and it said the same error message. I already paid for these 2 movies is there any way i can download them?..

    I have the same issue on my brand new 32GB Wifi iPad bought in Montreal. Tried to download a rental in HD from the itunes store directly to the iPad. It almost completely downloaded and then upon checking the status of the download it said download error. Music video's, music, and apps all download just fine. When I tried "check for downloads" in iTunes on my Mac, it does not show up, and now I cant delete the space the partially downloaded rental occupies :S.

  • I am getting the "Original File Cannot Be Found" error with 4000 exclamation points.  Please help...

    To start from the beginning I originally kept my iTunes library on my internal hard drive.  However, it was getting large and I needed to move it so I moved it to an external drive.  Then I recently upgraded my internal hard drive to a 1 TB hard drive so that I would have plenty of space for everything.  I then moved my iTunes library to the new drive, or so I thought.  It is all technically there.  (As you can see from the bottom screen shot.)  However, for some reason iTunes is looking in the trash for a good portion of my library.  (I have 4400+ songs and 4000+ of them are showing the exclamation point and this error.)  I know that I must have done all of the moving around incorrectly.  (I followed directions from some blog I googled, big mistake.)  Now I just want to get my library how it should be.  All back together on this new internal drive with no dups etc.
    I have over 4000 songs giving me this error.  I can go in one by one on each song and find it in the iTunes Media folder.  But I certainly don't want to do it that way.  Here is the info on where the song(s) seem to be currently:
    Here's a shot of my preferences:
    Just FYI, I know that apparently iTunes is looking for this music in the trash.  However, if I go here:
    Then I find the music there as well.  (Which is where it is in my preferences.)
    Please help!  I don't want to have to go through over 4000 songs and update them one by one.  The music is apparently in both the trash and in my iTunes media folder.  How do I get iTunes to look for these 4000+ songs in the right place without going in one by one to fix them?
    Any help would be greatly appreciated.  Thanks!

    Hi JJuniper,
    When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. For this issue, we will need to refer to the following article:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge. You'll want to first delete the tracks from your list in iTunes, then access the purchased page:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • My capture screen is black won't let me capture cs5 premiere help

    I'm farely new to premiere pro cs5, im trying to capture a dv tape from a deck and ive used it before but now it seems that its black screen when i pull up the capture tool, im able to fast forward and play and stop (deck control) but it just wont give me a picture. i have an external preview monitor (client monitor) and it shows the picture form the tape on there but on the capture tool there is nothing. Ive looked at the preferances and settings and it seems like everything is good but still nothing. what am i doing wrong?

    Hi,
    Are you trying to capute via Firewire?   If so, this may help you:
    Try replacing the 1394 driver with the Legacy driver that comes with Windows 7.
    Below is the step by step instructions on how to install the Legacy driver.  This fixes caputer problems with Premiere.
    Click Start
    Then click on Control Panel
    Click on Device Manager
    Note: If you don’t see Device Manager listed, click on View By: Category on the top right side of the
         Control Panel Window.
         Then Click on Large Icons
         You should now have a list of items in the Control Panel and click on Device Manager.
    Under the Device Manager, look down the list for IEEE 1394 Bus Host Controllers and Double Click on it.
    It should display something like - 1394 OHCI Compliant Host Controller
       Note: If it has the word (Legacy) behind it, you are already setup and you can just exit out.
    Next, double click on the 1394 OHCI Compliant Host Controller
    A window will popup saying 1394 OHCI Compliant Host Controller Properties
    Click on the Driver Tab
    Then look down in the widow and click on Update Driver
    Then select - Browse my computer for driver software
    Next select - Let me pick from a list of device drivers on my computer
    It will bring up a list of drivers.
    Click on 1394 OHCI Compliant Host Controller (Legacy)
        NOTE: It is important that you select the one with (Legacy) after it, just like shown above.
    Then click Next
    Once it installs the 1394 OHCI Compliant Host Controller (Legacy),
    it will say Windows has successfully updated your driver software.
    Click on the Close button and exit out of all of the other windows.
    Then Reboot your computer.
    You will now be able to import video via the Firewire port on your computer.
    If you are still having a problem importing video after you have switched the Firewire driver to Legacy, then the problem may be with the Firewire port.  This is a common problem.  The Firewire port will work with an external driver, but it won't let you import video from your video camera.  Most people report this problem with Dell computer, but it does happen with other brands, even brand new computers.  This problem is usually with the Firewire port that is built into the motherboard.
    The fix is simple:
    1.  Install a Firewire card into one of the open slots in the computer
    2.  Using the instructions above, set the drive to Legacy.
    3.  Reboot the computer.
    4.  Then connect the Firewire cable from the video camera, into the new Firewire port that you just added.
    This fixes the problem 99% of the time.  Firewire cards are not the expensive, they run from $10 and up, depending on any extra features the card may have.
    NOTE:  We have noticed that when Microsoft has issued certain updates, it can cause Windows 7 to switch back to use the original 1394 OHCI Compliant Host Controller driver.  If you notice the Firewire device is transferring slowly again just repeat the above steps and reinstall the Legacy driver.
    Hope this helps. 
    Dave

  • Trying to install iTunes but appears an error with Bonjour... Please HELP

    Can't install iTunes because appears an error that says like, bonjour can't be found, contact customers service

    "quicktime is not a valid short file name"????
    That's usually related to trouble with the QuickTime.msi.
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Maybe you are looking for