Quicktime with browser

Well I go to the quicktime website with IE7 and I get an error that says something. When I go with Firefox2, the software crashes. Does anyone else have this problem? I wanna reinstall it, but I installed with quciktime and iTunes. How can I install Quciktime only? Any solutions without reinstalling Quciktime?

Concurrency bugs (i.e. bugs in multi-threaded code) are a typical cause of non-deterministic behaviour since the manifestation of the bug is dependent upon the timing of context switches between threads and context switches are unpredictable with a pre-emptive threading model. I have observed behaviour that is strongly suggestive of a concurrency bug while using QuickTime 7.1.3 as a browser plugin on Mac OS X.
Since concurrency bugs are inherently difficult to reproduce, it is easy for developers, or their managers, to deny the existence of such a bug. Just because they can't reproduce it easily doesn't mean that it doesn't exist!

Similar Messages

How to correctly render quicktime with two pop and timecode?

I have a feature finished and need to create the quicktime for the composer and mixer. But I have to add a new time code generator as well. So, at the moment, I have a timeline starting at 58:50 and the feature starting at 01:00:00. It is selected as non-drop.
I was told by my online editor that I would have to either Nest the sequence and then generate my quicktime or I would have to create a quicktime from this sequence and then drop the quicktime on a new timeline and then create a quicktime again. I may be wrong, but it seems that both of those would be uneccesary as shouldn't I be able to just make the edited sequence into the new quicktime with an added timecode (via the generator)? Also because if I have my original timeline at 58:50 and then nest it on a new time line would the new timeline start at 01:00:00 and then generate a mixed up timecode?
So, with all that in mind. I am just wondering what my steps from here are in:
1) How to add the two pop (I was told to go into the effects bin and find the Bars And Tone and extract two frames at 59:58:00 and 59:5801 and I gues drop those two frames into the timeline.)
2) Add the timecode generator ( i know it is available somewhere in FCP)
3) And how to then correctly render a quicktime for the post gang.
After that, I drop the drive and project off to the online guys and they will do the OMF and create the master HD project.
Thanks in advance.

Hi Andy,
Thanks for the reply but am not sure what you mean by removing in and out points and dragging from browser to a new sequence. How does one technically remove an in and out point? And is this a strategy that will somehow enable me to be able to nest the project?
I remember once a long time ago I tried to nest a large project (probably 70 minutes) and I tried highlighting the whole thing (which I may be doing the long way as I have to SHIFT click clip one and then SHIFT click the last clip and then try and find every clip in between that didn't get highlighted - which can take some time) and it would still not nest the project (kept coming up with some warning). So, I ultimately had to nest it by copying and pasting the film in 5ths onto their own sequences and then nesting them and then nesting the nests!
So, I am hoping to do a quicktime for my post guys will not be as long winded....
Thanks.

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

MAKE EMBEDDED QUICKTIME WITH PLAY BUTTON IN FRAME

Hello does anyone know how to make an embed quicktime with a play button in the video frame so it has a poster frame and a button on it and wont play until it is clicked on

It's known as a poster movie. The first file acts as either a placeholder (or a button) that is linked to the second file.
You can use any image format to create your click to play "button" and add it to a single frame from your movie or to another image. Size this 16 pixels higher than your movie source file if you plan on showing the movie controller and save it as poster.mov.
Your html code will have this poster movie load and nothing further will happen until your visitor clicks on it. Once clicked the second .mov file will begin downloading and then playing. You can also use this poster movie technique to load a second movie directly in the QuickTime Player app.
http://homepage.mac.com/kkirkster/C/
One of mine. Take a look at the page source to understand the "href" and "target" tags.

QuickTime with Transparent Background

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3234432307_151173
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
I am having problems in publishing a file done in Flash- a
logo spinning,
and I want the background to be transparent. Under Publish
Settings, I have
the following:
ALPHA: Alpha-transparent
Layer: Auto
And checked the Flatten (Make self-contained).
However when I import the file into another application-
Apple�s Motion, I
get a white background- which is what I have originally. Am I
doing
something wrong?
I even check the track in QT Pro and set the Movie Properties
but it is not
becoming transparent. I appreciate any tips on it.
Thank you.
Kelvin
--B_3234432307_151173
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>QuickTime with Transparent
Background</TITLE>
</HEAD>
<BODY>
Hi 
 
I am having problems in publishing a file done in Flash- a
logo spinning, a=
nd I want the background to be transparent. Under Publish
Settings, I have t=
he following: 
 
ALPHA: Alpha-transparent 
Layer: Auto 
 
And checked the Flatten (Make self-contained). 
 
However when I import the file into another application-
Apple’s Moti=
on, I get a white background- which is what I have
originally. Am I doing so=
mething wrong? 
 
I even check the track in QT Pro and set the Movie Properties
but it is not=
becoming transparent. I appreciate any tips on it.
 
 
Thank you. 
 
Kelvin 
</BODY>
</HTML>
--B_3234432307_151173--

I've never gotten it to work either. I usually set the
background to something not used in the animation, like bright
green, and then composite the video. I've never used Motion, so I
don't know if this is possible.

Links don't work with Browse Sequences

I have an image that links from one page in my project to
another. It works fine when I generate my primary layout without
browse sequences. But when I generate it with browse sequences,
clicking the image produces a blank page. The only way it will open
the page is if I set the Hyperlink Options to "Display in
Autosizing Pop-up". If I leave it set to "Display in Frame (Page
Default: none)" clicking the image produces a blank page.

Hello again
I'm not saying you are full of squash, just that I'm unable
to duplicate it using my own copy of RoboHelp 6. I tested by
linking an image to a different topic with no browse sequence in
the mix. Compiling and testing. Then creating a Browse Sequence and
recompiling and testing again. Mine worked.
This is a bit of VooDoo, but you might wish to try defining a
totally new window, configuring that as the default and compiling
again. See if that changes things.
Cheers... Rick

Error Occured in exporting to Quicktime with Conversion

hello... I am gettin a general error on final cut pro and im needing just a little help... When i export to Quicktime with Conversion on the streaming medium setting... i get an Error Occured Message...
This error has never occured before on any of my other video's but with this one... i did add some music to the background and it is a bit longer video... almost 10 mins... What do you think i need to do to export this to quicktime with conversion on the streaming medium setting?
Thanks again,
Charlie Jabaley
SpitYoGame.com

First, try exporting as a selfcontained quicktime with sequence settings and try using compressor for the conversion.
It's unlikely the audio being longer than the video is causing the problem, but try adding a big of slug to the end of the video track so the material on the video track extends to at least the end of the audio.

Trouble with browser editing FTP upload

I have been updating a site to a sub-domain of my personal site while working for client. Yesterday when I tried to walk them through the in-browser editing feature I got an error that wouldn't let me login to edit the site. I followed all of the instructions in the error message (use the "upload via FTP" setting, sign in with the same user) but I still can't log in. Is this a bug with how Muse handles sub-domains, or what else am I doing wrong?

No, everything uploaded correctly. You can see my site properly
-Eric
On August 23, 2014 at 3:37:13 PM EDT, Zak Williamson (Adobe) <[email protected]> wrote: Trouble with browser editing FTP upload reated by Zak Williamson (Adobe) in Help with using Adobe Muse CC - View the full discussion When using File > Upload to FTP Host... do you receive a warning message that the domain name could not be validated? Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6668001#6668001 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Need a File Parameter with Browse Functionality in ABAP

Hi
I Need a File Parameter with Browse Functionality in ABAP.
Can anyone help me with logic.
Regards,
Sree

Check below code:
PARAMETERS: p_file TYPE localfile.
DATA: l_path TYPE string,
      l_fpath TYPE string,
      l_fname TYPE string.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title         = 'Save to...'
      default_extension    = '.txt'
      initial_directory    = 'C:\'
    CHANGING
      filename             = l_fname
      path                 = l_path
      fullpath             = l_fpath
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc EQ 0.
    MOVE l_fpath TO p_file.
ENDIF.

How can I export a Quicktime with Alpha embedded?

I have a few titles that I've created in Premiere. I've placed these titles into their own sequence and would like to export them as a Quicktime movie using the Animation codec with an embedded alpha channel (Millions+) so that I can import it into After Effects and do some animation work with them. I don't want them against black though.
When I Export Media in Premiere and select Quicktime with the Animation codec, the "code settings" button is greyed out.
Please help. There must be a way to export media with an embedded alpha channel like you can in FCP.
Thanks.

WoOWavE_Sync_Pro,
I don't see what is complicated about it at all. I don't mean to start an argument, but making a title is easy, exporting it with an Alpha channel is easy (as shown above). Where is the problem? Why go to TIFF? I certainly would never "export normally and key out the backgrounf (sic) in AE"
Perhaps you would care to explain your comments in more detail?
If you are interested in the font style I used, it came from Tim Kolb back in the CS3 days or before. I have a link to his styles on my web site. I used to count the downloads, but over the years I lost track.
Of course, having said that, if I was going to have a complicated title with motion, I would use AE to begin with. And I would probably use a downloaded template as a starting point. But that is because other people are more creative than I am. I am just a techie dabbling on the creative side of things.
By the way, I suppose I should get around to testing your product. If I like it, I will post a link on my web site to direct people to it. Feel free to send me an email from my web site telling me why people should use it and what you want people to know about it. And you might want to suggest how to test it as well. I used to get a LOT of visitors every day. It has cut way back since I have not been updating it. Now that I have started to update it again, I expect the visitor count will rise again. The moderator is only doing his/her job. This is a site sponsored by a corporation, and advertising for other companies is probably not good form (besides being against the rules).
http://www.stevengotz.com

KEYNOTE - Export to quicktime with slides turned off

I have just done a full set of speaker walkup slide intros and then tried to output to quicktime with certain slides turned off and the ones I wanted to export turned on. Each time I would export the QT movie (for individual speakers turned on and the other turned off) and Keynote would record the first three slides rather than the three further in the deck that I have turned on. Has anybody had the same problem? Maddening!!!

Apple promised a 6 month update scheme, that takes us to May 2014 to sort this out, in the meantime I'm using Keynote 09 for all the stuff, 6 cant do.

WAAS 7341 uanble to optimize application runnnig with browser IE7

Hi,
I'm having Cisco WAAS 7341 with version 4.1.5.F
Aplication running on browser IE7 are unable to optimize the connection on WAAS where as the application running on browser IE6 are able to optimize the connection on WAAS.I do not find any bugs related to current version
Pl. let me know if any tunning needs to be done on WAAS or on browser.

Hi
When you refer an application running with browser IE7, I think you are referring to an HTTP application.
Do you see HTTP AO enabled? sh accelerator is the command to check it out.
Do you see the connection showing up as THDL on your WAAS box? sh stat connection client-ip
Regards
Rama

Adobe Interactive Forms with Browser Apple Safari and Mozilla Firefox

Hi Experts,
We have a requirement to implement HCM P&F using Adobe Interactive Forms. These Adobe Forms will be accessed using Browser Apple Safari and Mozilla Firefox. I have come across that the Adobe Interactive Forms are not supported on these browsers. In the same regard I have also gone through the Product Availability Matrix by SAP which specifies that Forms are not support on these browser and neither SAP has future plans to support them.
PAM can be found on link: http://service.sap.com/pam
I would like to know from experts that if any of the project has successfully implemented Adobe Interactive Forms with browser Apple Safari and Mozilla Firefox or
is there any solution which can make these forms work successfully on browser Apple Safari and Mozilla Firefox.
Your early reply will be highly appreciated.
thanks
Manoj

Hello,
Mozilla Firefox is supported for Adobe Interactive Forms on Windows operation system.
Unfortunatelly we do not have support for Mac OS and Safari browser.
Please re-check the PAM.
Best regards,
Dezso

Approval Workflows with Browser-Based InfoPath Forms Not Opening In Browser

Hello,
I have an InfoPath forms document library with browser-based forms. Once a user submits a form, I have them utilize the built-in Approval workflow. The approval workflow emails the approver and provides a link to the document. When they click the link in the email, it trys to download the InfoPath XML form instead of opening in the browser.
How do I get it to open the form in the browser when I user clicks the link to it from the email or the approval task in the tasks list?
Thanks

Hi chapman85,
Could you please let me know if Clayton’s suggestion is helpful for your issue?
If you need further assistance, please feel free to let me know.
Have a nice day!
Lambert Qin
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
Sincerely,
Lambert Qin
Posting is provided "AS IS" with no warranties, and confers no rights.

Quicktime with Flash

I really want to use Quicktime's new H.264 codec, but I also want to stream the video using a flash player. Is this possible? Thanks for any and all input.
Brad

Using export Quicktime Video export in Flash will use a Quicktime codec.
If you use Eport to Quicktime. You must change your publish settings to Flash 5. Then you can use export to Quicktime with no errors. This on will place a flash in side a Quicktime container. This movie file will be (alot) smaller than the above file format.
I email mailed both to myself with no problems.
I think it is your client is the one having the problem in opening your Quicktime Movie.
Try this. Zip the Quicktime movie. If you have a server. Place the zipped file on the server. Give you client the URL to the zipped file. This will force a down load of the zipped/movie file to you clients desktop. Or were ever he/she want to places it. It could something in your email program/isp or his/her's causing your problem.

Quicktime with browser

Similar Messages

Maybe you are looking for