Quiz about tax classification

Hi, experts,
There is a problem about tax classification that need ur help..
In billing document, there are 2 tax classification, one is TaxClass1-Cust at header , another one is Tax class. mat. at item level, normally, there will only have 1 number on these two tax classification.
But I found in one of our billing document, there are 2 numbers in Tax class. mat., is anyone know why and what's the impact regarding this?
Thanks for ur kindly help in advance!

hi,
Tax is determined based on
1) organizational structure, country, region, or city of delivering plants and
2) country or receiving customer
3) combination with tax relevancy indicators on the customer and material master records.
check this
Customer Taxes    Material Taxes     Rate Taxes
         0                              0                  0 %
         0                              1                  0 %
         1                              0                  0 %
         1                              1                  9 %
In this example, if both the Customer Master and Material Master Tax code is 1, Tax will be included when you create the Sales Order.
CHAN
Message was edited by:
        CHAN HARI

Similar Messages

Change Tax Classification in Sales Order

Hi all,
I have a question about tax classification in sales order.
I know that taxable or non taxable is determined by a variety of key (by material, order type, departing country & destination country, etc).
I use Domestic Taxes as a key to determine taxable or nontaxable. To do that, I need to set up tax classification in customer master and material master, right?
Based on that combination, I can determine if it becomes taxable or nontaxable and if so by how many percentage.
OK.
Here is my scenario:
The customer and material I use to create sales order is set as taxable. So, when I create an sales order, the tax and its % is automatically presented in conditions.
But how do I do if I want to make only this sales order be nontaxable?
I changed Tax classification from '1' taxable to '0' nontaxable in Billing Document Tab at Item level, but tax is still there in Condition Tab.
I thought taxable or nontaxable can be changed by this way. Am I missing some procedure?
Regards,
Screen Field:VBAP-TAXM1

Hi,
When you set the tax condition to your country and set the tax rate in VK11 based on the customer tax classification and material tax classification, it should pickup in the document.
How can it posssible to have tax for one document and no tax for the other. Tax is uniform, and it will be applicabe to all customers (certain exceptions also there). In any case the customer is not taxable ot material is not taxable, maintain the customer / material tax classification as '0' and don't maintain any condition rate for that.
Prase

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Check tax classification. HELP pls

Hi all,
I am encountring a problem in IDOC creation. I am creating a Customer record from a file to SAP R/3 4.6 version using IDOCs. I use several segments like E1KNA1M, E1KNB1M, E1KNB5M , E1KNVVM and E1KNVIM. the problem is the Batch-input created by the IDOC didn't fill correctelly the tax classification code for some customers. for others the problem don't occur. I am using the IDOC_INPUT_DEBITOR to creat e the IDOCs.
I tried the WE19 transaction to simulate the execution in forground and it's stops on the classification taxe code whereas the segment E1KNVIM is correctly filled.
Did i missed something?
please help.
Wail

How about the material master itself? Guess some country specific requires it to be loaded into material master.

Tax Classification Code

Hi,
I am trying to select a tax classification code for an AP Invoice at line level and I couldn't find the respective codes.
I checked in the Look up codes with ZX_INPUT_CLASSIFICATIONS and they are enabled and active.
Request you to guide me further on how can I view the Tax Classification Codes and select them at AP Invoice line level.
TIA.
Regards,
Niranjan

What you are talking about? I don't know that in Clusterware world.

Check tax classification Customer creation (IDOC)

Hi all,
I am a beginner in SAP Abap and i need some help to resolve my IDOC problem.
I want to generate Customer migration. my segments for the IDOC are filled. I use the IDOC_INBOUND_WRITE_TO_DB to create my IDOCs. Also for some customers, an error occur with status 51 saying : Check tax classification; maintenance is incomplete.
Or in the E1KNVIM segment, the tax code is filled as follow :
CLEAR ds_e1knvim.
ds_e1knvim-msgfn = '009'.
ds_e1knvim-tatyp = ds_tax-tatyp.
ds_e1knvim-taxkd = ds_tax-taxkd.
and in the we19 transaction, i have tried to launch it foreground
with the tax code filled correctelly.
but the batch-input don't fill the tax code case.
But for some other customers, the tax code case is filled correctelly?
Did i messid something ?
Thanks for your answers.

Hi Julius,
Thnx for the reply.
No I am not maintaining any tax related settings & all the fields in R/3 in XD01 are optional. Can you please elaborate further as to wht Tax settings are you speaking about???
Many Thanx.
SP

Tax classification field to be fill automatically in material master

Hi Friends,
Is there any settings to fill automatically the tax classification fields In material master under sales : sales org 1 tab, tax data.
Could you please explain where we have to set the combination of country , taxcategory and tax classification. I have bit confusion about this relation ship.
My client requirement is to fill tax classification(Default 1 full tax) automatically while creating the material master data. Kindly guide me how to proceed in this regard...
thanks in advance,
Durga , sap sd

Dear Durga,
You want to know "Is there any settings to fill automatically the tax classification fields In material master..." . NO, there is no settings to maintain those filled automatically. because you are maintaining master data. and from master data those information are proposed to sales order.
your second query regarding combination of country, tax category, tax classification. If you want to maintain the combination of country, tax classification(1.tax classification of customer and 2. tax classification of material.), you need to maintain proper combination of fields in the pricing procedure.(...basic function>pricing>pricing control>Define condition table). here you have to put the fields in the field catelog and create the table.(that mean a table should be include those fields). And secondly the Tax Classification, you have to maintain in customer master and material master (where you maintain tax details. e.g, 0-tax exempt, 1-taxable etc.). And finally you have to maintain condition record of pricing (vk11) mainting value in those respective fields.
I think above info will help you. any further query, plz inform me.
Thanks

LSMW Direct Input Method RMDATIND tax classification material

Hi folks,
I am loading material master data throught LSMW using direct input method. In MM01 for a particular sales org we have tax classifcation for three different countries US, CA and GB. Could anyone tell me how do I post the tax classification Material data in the table control for these three different countries.
COUNTRY COUNTRY TAX CATG. TAX CATEG.       TAX CLASSIF
CA     Canada     CTX1     GST (Canada)     ...........
CA     Canada     CTX2     PST (Canada)     ...........
CA     Canada     CTX3     PST (Base+GST) Cdn...........
GB     United Kingdom     MWST     Output Tax...........
US     USA     UTXJ     Tax Jurisdict.Code     ...........
US     USA     UTX2     County Sales Tax     ...............
US     USA     UTX3     City Sales Tax     .............
Points will be rewarded for the answers.
Thanks,
Raj

Hi,
Not sure about the same requirement of countries & tax codes for all the materials for your upload.
If this is the case,
enable the
Extras->DisplayVariant
from the menu of the LSMW & check all the check boxes. Now you see the
__END_OF_RECORD__
for the structure
BMMH2
which has to be mapped with the input structure in the Maintain structure relations step.
double click on the
__END_OF_RECORD__
which will lead to ABAP editor & then put the following code:
* Canada
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX1'.
bmmh2-taxm1 = '1'.
transfer_record.
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX2'.
bmmh2-taxm1 = '1'.
transfer_record.
else if you have a different set of countries with different tax codes for the set of materials,
You need to have a separate file for this & map the fields to the structure fields of
BMMH2
Hope this helps.
Best Regards, Murugesh AS
Message was edited by:
        Murugesh Arcot

TAX CLASSIFICATION (CREATION OF SALE ORDER)

Hello
When we are creating a sale order, we will select the tax classification code like VAT & CST. It Depends upon the consingee address.
My question, while selecting the tax classification code, I am able to see both types of codes(VAT & CST). I need to display only single type of codes, like if consignee is local, then only vat codes must be displayed and if consignee address is out of the state, only CST tax codes must be displayed.
how to do this one. should I take any ABAP help or directly we can set from functional side.
Thanks & Regards
Maheshwar Rao. G

Hi,
When we are creating a sale order, we will select the tax classification code like VAT & CST.
Do you mean you are manually changing/Selecting the tax classification in the sales order??? If yes, then you can maintain the same in the customer master--Biling tab(VAT or CST what ever is applicable) and system will pick the same autoamatically.
In sales order, SAP has given the flexibilty to change the tax classification, and based on the combination that is maintained in VK11, system will pick the condition record. As specified, table 368 gives the combination for maintaining the condition record.
Regards
Vamsi

Error with tax classification

Hello guru's,
I am facing a typical error. while creating sales order the VAT condition is capturing the tax classification indicator from sold to party. It has to be from ship to party. Pl. help.
Regards,

Hi,
The tax classification search is based on the Customer master data
For TAX determination, system will first search the Tax classification of the Payer master data
If Payer master Data is not maintained , then it will search for the Ship to Master data ,
If none of the Payer and Ship to were maintained , then it will search for the tax classification of sold to Master data
The Sequence for search is
PAYER
SHIP TO
SOLD TO
In your case, if the Tax classification for Payer and ship to not maintained then it will come to sold to
Please check if the Tax classification was maintained in the ship to or not
thanks
santosh

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

New field for tax classification (Pricing)

Hi
The scenario is - we need to map a taxes from R/3 to CRM. for this we cant use MWST , as this tax condition is already being used in the current process.
If we use another condition type then the tax classification for Material doesnt get picked in CRM. So according to the SAP note -336235, we have done the development.
+The developments includes + - new field created for material tax classification purpose and this field assigned to Pricing structure KOMP and KOMG. we have also maintained condition record by using this field , but the data is not being read by this field during the calculation of taxes in sales order (R/3).The data is exist in material master -Sales org1 tab -Tax classification (1 or 0).
Could anyone let me know, that how the tax classification data can be read from material master for this new customized field.
Thanks in advance.

To use a custom field in pricing, you need to do two things:
1. Add the field to KOMP and KOMG and
2. Move the appropriate value in a user-exit.
Your post says that you have done 1. above. Have you coded the user-exit for 2. above? The user-exits are in MV45AFZZ.

Wrong Tax Classification Taken from Material Master

Hi Experts,
I have a problem with Tax classification when determining the tax % at sales order entry. Below is the scenario:
1) There are two taxes applicable: Output Tax (15%) and Excise Duty (1%)
2) Customer 01 is liable for both Output Tax and Excise Duty
3) Material A is liable for Output Tax, but not liable for Excise Duty. In material master, the tax classification is maintained as "0" for Output Tax (the first line) and "1" for Excise Duty (the 2nd line)
4) Material B is the opposite, i.e. liable for Output Tax but not liable for Excise Duty. In material master, the tax classification is maintained as "1" for Output Tax (the first line) and "0" for Excise Duty (the 2nd line)
5) The tax codes are defined (with tax % maintained) in FTXP
6) Pricing condition records are also maintained.
Now the issue is during order creation with Customer 01 and material A, both Output Tax and Excise Duty are getting calculated as Zero. Where as in case of material B, both taxes are getting calculated with value (15% and 1% respectively).
It seems that the system is getting the tax classification from the first tax (output tax) in material master and apply it to the other tax (excise duty). Therefore the Excise Duty gets the wrong value if the tax classification is different from that of the Output Tax.
Have anyone come across this issue before? Your help is much appreciated.
Thanks.

HI ,
thanks for your reply. In the meantime I figured out the issue myself. It was due to the access sequence that only checks tax classification 1 instead of 2 , 3 etc.
Thanks for your reply.
Dominique

Uploading TAX Classification data in material master

Hi,
I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
But bapi is uploading tax classification only for country DE.
When I am creating through MM02 its getting updated.
Can anybody tell me what is the problem ?

Hi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
       wa_taxclassifications-depcountry = wa_stax-aland.
        wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
        wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
        wa_taxclassifications-tax_ind    = wa_stax-taxim.
        APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata           = wa_headdata
      TABLES
        taxclassifications = it_taxclassifications
        returnmessages     = it_return[].

Automatic creation of new tax classification

Hi
Help needed in understanding......
Automatic creation of tax classification in taxes in billing tab of customer master , after creation of a sales depot in a different country
thanks
Anil

Unless you use jurisdiction codes, and no external tax system, for
example with tax procedure TAXUSJ, there is no validity dates for the
condition records. You can see this differnce by comparing the tables
A003 without jurisdiction codes and A053 with jurisdiction codes. A053
contains the extra fields DATBI (key field) and DATAB. This is the
standard functionality.
Please have a look at the following part of note 418582:
" Changing past percentage rates has to be inhibited in order to avoid
database inconsistencies. For this reason, the functions which allow you
to transport time-dependent tax codes with percentage rates from the
past are not supported."

Quiz about tax classification

Similar Messages

Maybe you are looking for