Quota - change message and soft limit message not shown

Hello,
I am learning how to use Quotas (quota-tools) and so far I have been making tests and I know "how it works", but I have two questions:
a) how can I change the message that is written when the hard limit (or grace time expires) is reached?
$ echo "something" > hecl
-bash: echo: write error: Disk quota exceeded
b) When the soft limit is reached, it starts the grace time (I can check from the root, with repquota -a), but not messages are sent to the user that has reach that limit, and the only way to do that is executing from root "warnquota" (I configured to send not an email but an echo message to the tty1 where the user is logged).
And I don't like that behavior, because I have to manually say warnquota.
And if the program knows when an user has reached the soft limit, must be any way to do actions when it is reached, like " Warn the user that it is reached, and also the root in some log". How can I do that?
Thanks.
PS: What I want?
- Configure the message, like: "Clean your dedicated space. You have reached your maximum amount". For example.
- When the soft limit is reached, warn the user in the terminal "You have only XXX B of free space to use until YYY day/time", also, put in some log in /var/log to warn the root. (No emails). If the user is executing a X11, like KDE, instead of shell warning, put a notify. And then establish a policy, like, before the user logs out, warn again, and when the user logs in, warn again.

Hi
Have you did the intial data transfer for ibase from DSWP.
to do this go to DSWP --> <Open your solution for which ibase has to be created> --> Edit --> intial data transfer for ibase.
regards
Naveen

Similar Messages

  • Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

    Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

    Quote
    Do you think I should try to find a cheap mobo to OC my current CPU?  How about trying to find one (mobo) used?  I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
    Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

  • On transaction FBL3N  report change layout and save layout icons  not activ

    Hi,
    I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N  report change layout and save layout icons  not active; only select layout icon is active.
    Please advise how these two icons can be activated.
    saeed

    Hi,
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70.
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: You can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    I guess that your user-id have set activity 03 for this object.
    The SAP notes 374656 and 409190 are recommended.
    So, if the values 01 and 02 are not included, then
    the user can't change and save layouts.
    For the line item display in FI the authorization
    object FI_IT_ALV has been created as an extra security check in addi-
    tion to the ALV authorization object S_ALV_LAYO.
    Please check note 374656 where you should be able to find
    relevant info about this. Also note 637554 should be helpful.
    Regards,
    Aidan

  • FBL3N  change layout and save layout icons  not active

    Hi,
    I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N  report change layout and save layout icons  not active; only select layout icon is active.
    Please advise how these two icons can be activated.
    saeed

    You are missing an authorization object in your user profile.  Run FBL3N and then run SU53 to see which auth obj is missing.  Then send those details to your Security.

  • Why is CC not taking my password?  I changed it and it is still not accepting it.

    Why is CC not taking my password? I changed it, and it is still not accepting it.

    double check your adobe.com password, http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  • Input and output varaiables are not shown

    Hi,
    I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
    Thanks,
    Sivakami - SEMC SAP team

    That is interesting.  The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
    Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
    If someone who doesn;t have ththe policy files installed tried it, what do they get?
    I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
    I would log a bug for this.
    FYI, you can control this by using the optional keylength argument in generateSecretKey()
    These two statements will produde keys with the same length.
    #arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
    #arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

  • I activated voice over and screen display is not shown and when touched, says time and "screen locked"

    activated voice over and screen display is not shown and when touched, says time and "screen locked"

    Hi muhsinmuhmmed,
    If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
    Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
    https://discussions.apple.com/thread/3933512
    Regards,
    - Brenden

  • Quota warning message not working

    I have Quota warning messages turned on to be sent daily to users using over 90% of their limit.
    To test it I've had an account filled to 95% for a few days and no message yet.
    Anyone else having problems with this? Anyone have any suggestions what might be wrong?

    Hi Edm Dude
    9 days later and no one uses the Quota Warning
    feature? I don't believe this. I'm looking for
    someone who has it working so I can compare
    settings.
    You’ve not had a great response have you? This is a pity. I don’t have the Quota Warning enabled and I have never been asked to enable it at various sites where I have deployed Apple Mail Server. I have never been asked to use Virtual Domains either although I can’t see why this would make a difference.
    Perhaps no one really does use this feature or has a need for it. It may be that it has been tried by others and they have had the same experience as you?
    The user has a limit of 20MB. The quota warning is
    set to 90%, and to notify ry 1 days. These have been
    configured only via WGM
    Don’t quite understand the statment above made from one your earlier posts. Mail Quota limits are defined in WGM. Server Admin is required for notification of Quota excess. Perhaps you already know this and the above statement is a typo.
    I know you have configured the user’s account in WGM for POP and IMAP, but is the user’s mail application account configured for POP or IMAP on the client computer?

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

    I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Under "CLIP" all featured options are grade out. Please Help!!! Also the blade and blade all are not shown in the tool bar...

    Hello People. I just reinstalled my sound track pro which took me forever, dah . And now I'm having difficulties with using some options that are listed under the  "Clip" they simply all grade out. Also some tools such as blade and blade all are not listed in the tool panel. Please help me people. Thank you all.

    People, never mind about the Blade Tool I found answer on the community board. Thank you. But still looking for grade out  issue.

  • FlatFile Schema Change - Message not getting changed correctly.

    A biztalk orchestration uses a flatfile schema (with three nodes accountnumber, date, amount) to send the output in .csv format. The generated .csv file presents the data in trheee columns specific to the three nodes.
    I am trying to add an new fourth node (Description) to the flatfile schema but the generated .csv file is presenting all the data in single cell instead of displaying using four different columns. I am trying to figure out a solution.
    Appreciate any pointers. Thanks

    Output file shows the new node with data.
    I think somehow the pipeline componenet not accepting the new schema structure. Hence tried the following steps and the solution seems working now.
    1) Deleted the pipeline reference in dependent application, stopped the dependent application.
    2) Stopped, Delete and re-deployed current application.
    3) Dependent application's sendport is enabled with the flatfile pipeline
    3) re-started the host instances, and dependent, and current applications.
    Flatfile conversion works OK now.
    Disabling & reenabling pipeline solved it.
    Thanks

  • Product warning messages not shown in WCEM

    Hi,
    I am facing a problem regarding product warning messages in WCEM 3.0.
    If a product is having status I1050 (Blocked - Error), message CRM_PRODUCT_I message 420 is shown in WCEM and it is not orderable. (Correct behaviour)
    If a product is having status I1051 (Blocked - Warning), message CRM_PRODUCT_I message 421 SHOULD (?) be shown in WCEM, but the product should still be orderable. The message is however not appearing. (Not what I want)
    Setup done:
    Both these messages have identical setup in transaction CRMC_MSGS
    In CRMC_MSGC the messages are having the same setup except "Msg Type". 420 is "Error" and 421 is "Warning". If I change 421 to error it is shown in WCEM, but then the product is not orderable.... I have tried to change the message type to "Information" as well, but it is not showing.
    Is there any way to solve this? Eg - message should be shown but product orderable. Is it possible to define in WCEM which type of messages that should be shown?
    BR / Alex

    Hi Tarun/Alex,
    I think you can solve your problem by using the messages.xml located in the salestransaction module. By default all non-error messages are hidden on the webshop, see xml below the attribute hide_non_error_messages:
    <tns:global_config
            default_message_resource_key="sapsalestransactions.ui.rfc.messages.label.defaultMessage"
            hide_non_error_messages="true" />
    So if you want to show your message you should create your own messages.xml in your custom salestransaction module (BO part), and also register it in the metadate.xml.
    <config-file namespace="customer" part="bo" type="rfc_messages">messages.xml</config-file>
    In the messages.xml you can add the message you want to be shown something like this.
    <wec:ifValue variable="${backend}" value="crmdefault">
                <message>
                        <source id="CRM_PRODUCT_I" number="421" type="I" msgV1="*" msgV2="*" />
                         <destination type="I"
                                               resource_key_shorttext="sapsalestransactions.crm.rfc.messages.yourCustomMessage"
                                               resource_key_longtext="" />
               </message>
    </wec:ifValue>
    Regards,
    Pieter

  • Warning message not shown in web browser after account is locked.

    Hi,
    I have the following configuration enabled for Access Manager:
    Access Manager 7.0 with patch 120955-04
    Web server 6.1 with patch 116649-20
    Directory Server 5.2 SP4
    1.) Individual password policy setup in directory server to lockout accounts after 3 failed login attempts.
    2.) Account lockout option enabled in Access Manager to lockout accounts after 3 failed login attempts.
    The issue that I face is the following:
    After, 3 consecutive failed login attempts and from the fourth login attempt,
    the Access manager does not give
    any error/warning messages on the browser, but redirects the user back to the login screen as the
    account is locked/inactive.
    This is sort of annoying as the user is confused as to why he is being redirected to the
    login screen.
    This issue is very much reproducible as below:
    1.) Create an individual password policy to lockout user after 3 failed login attempts and assign it to the specific user.
    2.) configure access manager to lock the account after 3 failed login attempts.
    3.) on attempting to login on the fourth attempt (correct or incorrect) the user is redirected to the login screen without any warning.
    Is this a known issue in Access Manager ?
    Can we configure the Access Manager so that a warning message is provided to the user after the account is locked.
    Thanks,

    This option has been set and we do get a warning after the second failed login attempt.
    When a failed login occurs the third time consecutively the user account is locked and a warning is shown.
    However, now if the user tries to login (say fourth time with the correct/incorrect password) he is redirected back to the login screen without any warning or error messages.
    This seems to be annoying as the user is redirected back to the login screen continuously without any messages.
    I am able to reproduce this problem on my test box and was wondering
    if this is a known issue.
    Thanks,

  • Messages not shown correctly in HTML BODY tab in workflow notifications

    I am defining a message in teh HTML BODY section. It is a basic HTML table. If I run this in a browser , it shows up fine , i can see the table with the rows and columns. which means there is nothing wrong in the format as such.
    But on the notification page, there is no table, every thing is printed as a single line . I am not sure what the issue is , please guide. Has anyone displayed data in a table in the HTML body of a notification?
    Below is my message body:
    <html>
         <table border="1" cellspacing="0" cellpadding="3" width="100%">
              <tr bgcolor="#CCCC99">
                   <td valign="TOP"><b>Schedule Reference Number</b></td>
                   <td valign="TOP"><b>Customer</b></td>
                   <td valign="TOP"><b>Request ID</b></td>
                   <td valign="TOP"><b>Description</b></td>
              </tr>
              <tr bgcolor="#FFFFDF">
                   <td valign="CENTER" height="20">SCHEDULE_NUMBER</td>
                   <td valign="CENTER" height="20">CUSTOMER_NAME</td>
                   <td valign="CENTER" height="20">REQUEST_ID</td>
                   <td valign="CENTER" height="20">DSP failed to process due to system errors. Refer to Release Management Exceptions Report generated for the mentioned Request ID.</td>
              </tr>
         </table>
    </html>
    thanks
    Message was edited by:
    user552775
    Message was edited by:
    user552775

    Nagamohan
    I created an attachment by using a document type attribute . That works fine, it opens in a new window and I can see the values.
    My requirement is to display this data inline in the message body itself. It is just 3 to 4 rows of data. So I dont need an attachment. I just want to display the data in the message of the notification itself.
    This is what is causing issues , it just prints everything in one line as a string.
    thanks,

Maybe you are looking for