Materials are locked by the own user (XIUSER)

Hello all,
We are facing som problems with an Interface for billing.
We are using en XI interface for billing, we are using parallel processing, bye the volume (from 25,000 to 30,000 invoices during night) is not possible to use simple processing.
The process starts with Sales Order creation, Delivery, and Billing, but sometimes at the time for the Billing, the system sends error M3024 'Valuation data for material & is locked by the user XISERVER' . I hope that any of you can help me, I'm new on XI and this problem starts to be critical.
Thanks

As already commented, the error occurs because some other work process is accessing the same data and then it cannot be accessed.
That needs to be corrected by using ENQUEUE/DEQUEUE techniques in the abap coding of the interface.
But even if some of the entries error out, if the execution is asynchronous they will be automatically persisted and sent again.
Regards,
Henrique.

Similar Messages

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.

let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim

Why we cannot view the move orders which are created by the other user?

Hi,
Can any one explain me the below point.
Why we cannot view the move orders which are created by the other user.
Ex: From ABC user I have created a Move Order: 123456 in M1 Org If I login to the other user BCD I cannot view the same move order in the same ORG i..e M1 ORG.
But we can perform the transact move orders for move orders which is created by the other user.
What could be the reason? Why the system is restricting this? Is this the standard functionality of oracle?
Can any one explain?
Regards,
Kv.

This is due to a security function which allows to see the move orders created by the user only.
Please refer to the meta link document ID 280131.1 for detailed description.
I have tried these steps in one of my test instances long back and was able to see move orders created by other users.
Thanks
Karthik.

I have purchased an ex-corporate ipad air. it has come locked to the previous users ID. The purchase is from a reputable auctioneer of which receipts can be produced. How can i process the unlocking/deactivation of the previous apple ID.

I have purchased an ex-corporate ipad air. it has come locked to the previous users ID. The purchase is from a reputable auctioneer of which receipts can be produced. How can i process the unlocking/deactivation of the previous apple ID.

Unfortunately the situation as we understand it is that Apple will unlock phones locked by the original owner if they themselves provide proof of purchase. They will not unlock it at all for a subsequent owner who has bought it second-hand, however legitimately.
The auction house have sold you an item which is not working as described and your argument is with them. They must take it back and refund your money. If as you imply the previous owner is absolutely not available then this phone is permanently unusable and there is no way whatever round that.

What materials are used in the making of the iPhone 4?

Hopefully this is in the right section.
For a school project I am supposed to create an inquiry of 'If I should own a cell phone'. In order to answer this question properly, I need to know the materials used in creating the iPhone 4, where they were created/mined, and so on. If anyone could inform me or give me a website to which I may find this information, I would be truly greatful.

Hello,
Can you specify which cables you will be using?
The cables are normally not intended for very high voltages, so please give a description of the application as well.
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/

I'm trying to re-set the iTunes on my Mac. It is locked to the previous users account

I'm trying to remove the previous users itune account and use mine.

In iTunes pull down the Store menu and select Sign Out.
Ideally you should wipe the HDD of the original owner's data and install the OS clean.

Word says file is locked by the SAME user trying to open it, but its actually opened by another user

Person X has FOO.doc open.
Person Y goes to open FOO.doc.
Pop up on Person Y screen, "can not open file, already opened by person Y"
Person X closes file.
Person Y opens file no problem.
So its not the preview pane issue.
And this happens no matter who attempt to open if its already opened, it always says this ONE user is the person using it.
Both systems fully up to date. Network share from Server 2008. All meta data cleared for doc.
In short, no matter WHO has this file open or WHO tries to open it, it says person Y has it open when it is opened. There are naturally no issues when its closed anyone can open it and it does save meta editor names.
I've also changed the owner in NTFS and this has no impact. Clearing doc meta data, has no impact.
This problem here is when its left open, the incorrect name shows up (the same name every time) so staff has no clue where to go to close the file.
Yes, I've read many threads here and tried those that apply, none have resolved it.

Hello darrensimon,
This is a bug in Windows 7 (maybe 8 and Server as well). One of my customers are sometimes affected by this. I have not a perfect solution but I've arranged so that the IT responsible person on that company can access the server where
the files reside through RDP (Remote Desktop). Already open is there Shared Folders->Open Files. This gives the IT responsible person means to force closing of an already saved file that for some (bug) reason stays in the cache (MS loves cache but never
updates them) and falsely claims the file is open.
Please try! Shared Folders are reached by right-clicking Computer and select Manage.
Best regards George

When line item materials are same add the condition rate.

HI!
Im my smartform I am trying to get the unit price for the line items. There are are certain scenerions where my code faisl because the billing doc is prepared with multiple sales order which has several materials eneterd twice or thrice . SO as per my code the net value is getting added up for the identical materials but the condition rate is not adding up so when I do teh calculation to get the unit price it gives me wrong values. Like if theer are 3 materials in the billing doc with net price as 5000 each with eachs condition value for the tax is 500 then my code calucltes teh total for 3 items (identical ) as 150000 which is right but I have to substeract the condition value from this as teh condtion value is a tax and that is alreday included in teh net price so   we substarct, hence in this case it should do 15000 - 3*500 but unfortunately it does only 15000 - 500 , I beleive it takes the condition rate only for the last item found and substract that but i need to include all teh three items value so I get correct unit price.
Following is teh code I used. I need to add functionality such that the gs_it_kond_w-kwert gets added up each time the material number is same. so that i get the correct unit price.
loop at is_bil_invoice-it_kond into gs_it_kond_w where
      bil_number = wa_it_gen-bil_number and
      itm_number = wa_it_gen-itm_number .
    if gs_it_kond_w-kntyp = 'D'.
      gs_unit_price = ( gs_it_cont-netwr - gs_it_kond_w-kwert ) / gs_it_cont-fkimg.
      gs_it_cont-netwr = gs_unit_price * gs_it_cont-fkimg.
      is_bil_invoice-hd_gen-bil_netwr = is_bil_invoice-hd_gen-bil_netwr - gs_it_kond_w-kwert .
    else.
      gs_unit_price = gs_it_cont-netwr / gs_it_cont-fkimg.
      is_bil_invoice-hd_gen-bil_netwr = is_bil_invoice-hd_gen-bil_netwr.
    endif.
endloop.
endif.
Thanks

Hi Aarav,
I am not sure how your code behaves but, you can try following ways:
1. To ensure that if material for different line item is same, you can put a join on KONV, VBAK and VBAP as KONV-KNUMV = VBAK-KNUMV and VBAK-VBELN = VBAP-VBELN and KONV-KPOSN = VBAP-POSNR. After this, you can loop through the data extracted, sort it with material number and check for repeated materials and from KONV, you can get condition value and condition type etc.
2. To ensure that you are considering tax deductions each time a certain material is repeating, you can calculate net value at each material using its calculation type (KONV-KRECH) (percentage or fixed value) and condition value (KONV-KBETR or KONV-KWERT) without checking whether it is repeated or not. So, in the end, you will have exact net value and you will not miss any deduction.
Let me know if this helps and also, for any clarifications.
Gouri.

How to unlock iChat conversations that are locked onto the desktop

I recently saved an iChat conversation to my desktop. I accidentally locked it, and it won't let me move the conversation to the trash because it's locked. Any way to unlock it, so I can remove it?

Select the item in the Finder, choose Get Info from the File menu, and uncheck the Locked checkbox.
(28958)

Animation area locked in the upper right corner

I pressed a button that did hang the picture on the right , I'll take a print for you to see

HT4910 I have 5 apple devices that are using the cloud. Do i need to have ALL of the devices backing up to the cloud since they are all on the same USER LOGIN or do i just need to buy more space?

I have multiple aple devices ( Ipad2, Ipad3, Iphone 4, Iphone 4s, Mac Mini, and Apple TV) I am using the same apple login to sync to the cloud. My question is do I need to sync ALL of them to the cloud or just one of the devices since I have them set up to sync anyway, or do i just need to buy more cloud space. Thanks

Welcome to the Apple Community.
You should sync all of them, if you want them all to share the same information.
Syncing is not the same as backing up. I suggest you continue to back up your mobile devices to your computer, unless you have a good reason to do otherwise.

The Fn keys are locked in the on position

How does one reset the default Fn setting that turns it on all the time?
for example right now when I push f5 it turns the webcam on or off. I want to make it so that it refreshes my browser, like normal.
how do I do that?

Admin... I think this question should be Sticky'd.
[Lenovo Edge 13, Type 0197-26U w/ 4 GB RAM]

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. Permissions are set to 'Custom' in the get info window and I can't change them.

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. I have 3 user accounts set up and I cannot access any of them. Permissions are set to 'Custom' in the get info window and I can't change them. Originally I had Snow Leopard installed on one hard drive and 10.5.8 installed on another. I started to have some problems accessing data between them and so I tried changing the permissions on ONE hard drive partition. The next thing I know, all my drives are locked (except the ones with the systems on them), the small lock appeared in the lower left corner of the drive icons and I don't have permissions to access any of them. In the get info window, permissions are set to 'Custom' and I can't change them.

There is suddenly a lock icon on my external backup drive!
Custom Permissions

How to unlock users in a SAP system if all of them are locked

How to unlock users in a SAP system if all of them are locked
Posted: Mar 21, 2007 10:07 AM         Reply      E-mail this post
Hello Experts,
In any SAP System,if a user having authorizations has mistakingly locked all the users of the SAP system,then how wll we unlock those users bcoz we wont be able to logon into the SAP System. Requested to revert your valuable replies at earliest.This happened with us,how to resolve it.My Email Id is [email protected] .
Regards,
Saumya

Hello Siva And Manas,
Thanx for ur replies .
Manas: These SQL statements we hv to run at the Command Prompt level only na.......
Siva : U r telling to delete the SAP* user ,u dont mean with the System created default user SAP* rite but u mean to delete our self created SAP*/any super user rite? Secondly how to delete tat user at the database level?
Regards,
Saumya
If all the users are locked , they can only be unlocked via sql.
Actually waht happens is if the uflag field of an user in table usr02 is 0 then the user is unlocked. Different values of the uflag field in table USR02 mean:
0          User not locked
32         Locked by CUA central administrator
64         Locked by administrator
128       Locked after failed logon
Incase all the users are locked execute the following sql to unlock them
update sap<sid>.usr02   (means update sapd01.usr02 or sapq01.usr02 etc)
set uflag='0' ;
commit.;
This unlocks all the users.
update sap<sid>.usr02
set uflag='0' where bname='xxx';
commit.;
This unlocksonly the user xxx.

Automatic Tasks are assigning to the user even the Vacation rule Enabled

Hi Experts,
I have enabled a Vacation rule in bpm/workspace.
But I can see all the tasks assigned in the inbox for that user.
Then I have enabled the Customized rule as the vacation rule and tried to reassign the tasks to an another user.
That is also not happening. Tasks are assigning to the other user.
Our ECM version is 11.1.1.6.0
Went through all the documentations and couldn't find the solution..
Thanks,
Nir

Hi Nir,
When you said
But I can see all the tasks assigned in the inbox for that user.
do you mean the instances that were previously assigned to the user are still there in the user's queue?
Vacation rules let you reassign or delegate tasks assigned to a user once the vacation period begins. If work items are already in their queue before the vacation rule goes into effect, they remain in the person's queue. It's up to the user to reassign or delegate the existing work item instances that were already in their queue.
New instances that arrive once the rule goes into effect however, should be automatically reassigned (or delegated depending on the vacation rule's radio button selected) to the other person.
Dan Atwood

Materials are locked by the own user (XIUSER)

Similar Messages

Maybe you are looking for