R/3 source system during Pro to Q refresh

Hello BW Experts,
Scenario:
BWPRO ( production) refresh to BWQUA ( quality).
BWPRO has PR3 as the source system for R/3
trasnfer rules are all based on this PR3
do the system refresh to BWQUA
still the transfer rules refer to PR3
even if i create a new connection to Quality R/3 as QR3
i cant create transfer rules for QR3 source system.
1) how is this situation handled in your experience.
2) Is there any type of translation that can be done for system refresh too( like we do for transports from Dev to Pro)
Suggestions appreciated.
Thanks,
BWer

hi BWer,
check if helps oss notes 325525 184754 543715 184322 325470

Similar Messages

  • Modify Source System during transport

    Hi all,
    I have an oracle source system set in BWD called <dbsid>D and the same on BWP called <dbsid>P.
    I'd like that source system been modify while transporting request between BWD and BWP ?
    S/O can explains me ?
    Thanks in advance,

    Hey, in RSA1, tools, there is a selection for "Source System Mapping". If you don't have access, ask BASIS folks. They always have access. Go there and give the respective names for your Oracle database. While transporting BI will automatically do this for DataSources, etc.
    Uday-Ram Chamarthy

  • Source system deletion before copy or refresh of Non productive system

    Hi
    regarding the refresh of non prod BI system. . As part of refresh, we were asked to follow note 886102.
    In this Scenario B3 matches to us. While doing the scond step. I have to delete source systems from RSA1 except my self system.
    It is taking long time to delete source systems as each object of source system is prompting for request and consuming long time to complete thsi activity.
    Please help me with a smarter method to delete the sourcesystems.
    Thanks,
    Haaris
    Edited by: Hari Prasad Bolla on Jul 14, 2010 8:50 PM

    Hi:
    The primary source of information is the how to paper on this topic:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
    YOu are correct, you can refreh the BI system without deleting the source system.
    Thanks for any points you assign (after all, I wrote the paper!).
    Best Regards -
    Ron Silberstein
    SAP

  • Errors have been reported in Source System during IDoc update

    Hello All,
    I am updating master data into a infoObject but the data load fails.
    When I go to click on IDoc Manitenance in OLTP system I see the error "Lock table overflow"
    Please advise on what to do to fix problem.

    Duplicate of another question

  • Error Loading Hierarchy Error when updating Idocs in Source System

    Hello  Friends,
         I am loading  hierarchy data  using Info pac into  0FUNDS_CTR . I have selected  a hierarchy under hierarchy selections tab  in the Info pac .
    All Partner profiles in WE20 seems OK .   But When I loaded data , throwing errrr message  as below
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    When I checked in TC WE05 says that  IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
    Please advice .
    Many thanks

    Hi  Krishna4bi,
    Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem  if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
    Hope it helps,
    By,
    Praveen Yagnamurthy,
    SAP BI Consultant,
    Blue Marlin Systems-INDIA.
    http://bluemarlinsys.com/bi.

  • Transport managment, source system changed in import

    Hi all,
    i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
    InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
    I'm looking for opportunities to change the target source systems LGPCLNT010.
    Where can I find a setting to change the source system during the import?
    Thnx.
    PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

    Hi,
    The entries  are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
    Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
    Regards,
    Durgesh.

  • No IDOCS arrived from Source system to BI  for generic extraction

    Hi All,
    While loading data from r\3 generic data source to BI, I am facing the below problem.
    1. Using Full Load:-
    The request from r\3 to psa turns red after a while. The request monitor says:
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    Details Tab shows : request green
    Under that Extraction tab shows  red
    missing messages.
    Transfer (IDocs and TRFC): Errors occurred .
    Request IDoc : Application document not posted
    I ran Transaction BD87,BD73 and execute with proper selections.
    Upon checking the idoc in source system Their status is 51 , which says
    Diagnosis
    The control parameters for communication with the BW server are not
    complete. A BW PlugIn upgrade could be the cause of the problem.
    System response
    Procedure
    Depending on the Release of the BW server, proceed as follows:
    BW Server Release 1.2B: Source system: Update InfoSource metadata
    BW Server Release >= 2.0A: Source system: Activate.
    Manually i tried to push the idocs in the BW and source system using TRF but i dint found any records???
    Soruce system connection is fine. Profile parameters are set properly and its active  .. But still am getting the same problem.
    Many thanks, I'll applicate your help.!
    Rakesh

    Hi
    I am also facing the same problem. This happened after restoration of the original system with a copy of the production.
    I am not able to get the IDOC posted in the source R3 system.
    I did a debug and it failed when verifying the table, RSBASIDOC.
    There appeared to be some missing records which need to be inserted.
    I can't find a way to insert the missing record and since then, I am not able to proceed.
    Have you resolved the issue?
    can you share how it can be overcome?
    Thanks a lot

  • Source system Inactive

    I created a source system for our R/3 QA client. The RFC connection works ok between R/3 and BW. I've done the following steps:
    Define client administration
    Define Logical System
    Assign Logical system to client
    Create RFC User
    Connecting BW with R/3
    In the last step I selected Replicate Metadata and chose Only Activate
    I get the following error message:
    No metadata upload since upgrade RSAR 672
    Detailed description:
    Diagnosis
         DataSource replication has not been performed since the source system
         upgrade.
    System Response
         The Content that is assigned to this source system is obsolete.
    Procedure
         Refresh the metadata completely for this source system.
    Procedure for System Administration

    Michail,
    I do have an answert to Your question, but a small request. Could you please send me the step-by-step guide on "How to create RFC connection".
    Thanks in anticipation,
    Kind Regards
    Paddy

  • Restore source system without replication

    Hi,
    Normally one would do a restore of a source system after it has been refreshed with RSA1.
    The "downside" is that it also do a replication of the datasources.
    We want to split the procedure and do the restore of the source system without replication and the replication itself separately. Are there any transactions, FMs, reports, ... to achieve these tasks separately?
    Eddy

    Eddy,
    I found out about that, but i never tried it, it is an interesting program, but i don't know how if it will ask whether a datasource need to be 3.x or 7. I guess if you execute as a background job it will not ask.
    Regards,
    Jorge Diogo

  • Source System BI激活出错

    BI数据源系统激活时提示以下错误，请大家帮忙看下，谢谢。
    no metadata upload since upgrade  rsar 672
    Diagnosis
    DataSource replication has not been performed since the System upgrade.
    System Response
    The Content that is assigned to this source system is obsolete.
    Procedure
    Refresh the metadata completely for this source system.
    Procedure for System Adminstration
    Edited by: caoq2009 on Sep 24, 2009 10:48 AM

    分步检查，缩小范围：
    1、确认BW的源系统连接是有效的：BW系统的RSA1->源系统->选择你需要的源系统，用鼠标右键点击check。
    2、如果源系统有问题，可以用sm59测试看看RFC连接是否正确。
    3、如果源系统没问题，可以重新复制数据源。
    4、正常此步骤后复制过来的数据源应该就是正确的。

  • What are the changes to be done on BW end during hardware change of source system?

    Hello Gurus,
    There is some hardware changes happening and I need help in certain things which I need to do from BW point of view.  First of all, I have attached a figure showing my system landscape.  I would kindly request you to go though the fig first.
    For QA, initially we were using AG3 as the source system, now they have made the hardware changes, made a system copy of AG3 into the new system AEQ.  We have connected our BW QA system to this new system AEQ.  Now when I check the system, there are no data in set up tables (I am using SD and MM), but there are data in tables.  But when I replicate data sources from AEQ to BW QA, the existing transformations and DTPs will disappear. So, that left me with 2 options-
    1. Either transport old transformation and DTP from BW DEV to BW QA
    2. Or create new transformation and DTP in BW QA system.
    Can you experts please suggest me what should be the solution?
    Also, please note that, the basis team started the hardware changes with ECC QA system for some reason.  Once ECC QA is fine, they are planning to make the changes in ECC DEV system (from AG2 to AED).  Currently, AG2 is connected to BW DEV and AEQ is connected to BW QA.
    Can you please suggest me whether there will be any issue if we opt to transport transformation and DTP from BW DEV to BW QA when BW DEV is still connected to old source system?  Or, is there any other easy way to sort this out? Please suggest?
    Thanks a lot
    Rakesh

    Hi,
    1. Either transport old transformation and DTP from BW DEV to BW QA?
    Yes, better to transport from bw dev to bw qa
    2. Or create new transformation and DTP in BW QA system?
    at BW Quality, creation may not be possible. Better to transport from bw dev to bwq.
    or use standard abap program to activate transformations and dtp.
    When changes are applying at source then you just need to take care the delta queues
    clear all queues by running related V3 jobs and delta info packs. make them as 0 count.
    once basis team was done changes later try to check your delta loads at bwq .
    Thanks

  • System slow during loading data from source system

    hi,
    I am trying to load master data from r/3 into bw in quality envirnoment by means of a process chain. The problem is it being a master data load is consuming a lot of time. My development and quality environments are maintained on the same server. I doubt about this being something related to memory. If anybody could mention the ways through which memory can be monitored along with the reason for the slow nature of the system would be very helpful.
    Source system: R/3.
    Environment    : Q03(quality)
    Load               : Master data(full load)

    Hi,
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) SM58 and BD87 for pending tRFCs.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    Thanks,
    JituK

  • Transformation: Need for calling a custom function module on source system

    Hi Gurus,
    I need to use a custom FM residing on source system within the transformation to determine the type (e.g. posting type) of a document item. The logic is quite complex with many exceptions (many if statements) and 2 customizing & few transparent tables are in use as well in the FM.
    From my point of view, there are few options for achieving the outcome:
    1. Copy the FM logic 1:1 in transformation
    2. Transport the FM from ERP to BW system
    3. Source system delivers the info (e.g. with an extra field "posting_type")
    4. Access the FM directly via RFC/BAPI
    However, there are pros and cons for each of the alternatives:
    *Option 1*
    pros:
    cons: consistency problem, need for importing customizing tables & source tables, high maintenance effort
    *Option 2*
    pros: better consistency compared to Option 1
    cons: need for importing tables, administrative efforts
    *Option 3*
    pros: no logic is needed at BW side, no transformations means no impact on performance, high consistency, no administrative effort
    cons: structure in source system has to be changed, impact on historical records
    *Option 4*
    pros: best consistency (better than Option 3 as FM might change), no administrative effort
    cons: impact on performance during transformation
    Could you please verify my assumptions and give suggestions on solving the problem?
    Thanks a lot!
    Regards,
    Meng

    Hi Joon,
    According to me.
    If Historical data amount is so high, historical data is available in BW(at PSA level or acquisition layer or corporate memory layer) and headache to load history data(because of overload on ECC due to huge amount of data) from ECC then I will suggest combination of 3 and 4 steps.
    If fetching history data from ECC is not headache for you then go for step 3.
    Step 3 is most common approach in BW, which is easy for implementation and support.
    Regards,
    Ashish

  • Vendor spend analysis report from ECC as source system

    Hi Experts,
    Currently am working on Functional Specification on a BI report "Vendor Spend Analysis".The source system is ECC.This report should give details about how much the company has spend on a vendor during a particular period along with payment terms , payment term days .
      I have started with Datasource 0FI_AP_4.Please let me know which field(credit or debit field) in the Datasource gives amount spend.I have checked the table EKKO and BSAK .What are the other fields and table i have to take into consideration.Suggest...
    Regards,
    Meera

    Hi Experts,
    Can anyone tell me the table which stores the data regarding the amount paid to a vendor.
    Regards,
    Meera

  • "Error in source system" while creating source system

    Hello,
    I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
    When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
    The error occurs after the information "Please log on as an administrator in the following screen".
    The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
    What else could be the problem?
    Greetings & Thanks
    Bettina

    Hello,
    now we know that
    1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
    2. the system has to be changeable (scc4 and se03)
    After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
    Thanks for the tip regarding the authorizations.
    Greetings
    Bettina

Maybe you are looking for