R12 clon problem On AIX

Hi Hussein;
My system is R12 db:10.2.0.3 on IBM/AIX when i try to take clone it gives me:
adcrdb.sh INSTE8
error what i have to do?
Thanks

Thanks for note Hussein;
I can stop/start lsnr wihtout error,when i try to connect db i have this:
sqplus "/as sysdba"
exec(): 0509-036 Cannot load program oracleCLON because of the following errors:
0509-130 Symbol resolution failed for /usr/lib/libc.a[aio_64.o] because:
0509-136 Symbol kaio_rdwr64 (number 1) is not exported from
dependent module /unix.
0509-136 Symbol listio64 (number 2) is not exported from
dependent module /unix.
0509-136 Symbol acancel64 (number 3) is not exported from
dependent module /unix.
0509-136 Symbol iosuspend64 (number 4) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait (number 5) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait64 (number 6) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait_timeout (number 7) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait_timeout64 (number 8) is not exported from
dependent module /unix.
0509-026 System error: Error 0
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
ERROR:
ORA-12547: TNS:lost contact
Any idea?

Similar Messages

Web service proxy take ~4 minutes to detect connection problem in AIX!

Dear All,
i am developing a client application that consume web service , by jdeveloper 10.1.3.1.
i found a problem, in AIX, that the web service proxy generated by jdeveloper take long time
to detect connection problem to the server (e.g. server is down, network down, invalid
ip address or port supplied).
in ms window, if the proxy can't reach the server, it throw exception within seconds.
but in ibm AIX, it take about 4 minutes !!! the time is too long until the exception is thrown.
could anybody help me?
is there something i can set to greatly shorten the hanging time when connection
problem?
thank you.

nobody experience this problem?

R12 clone with RMAN auxiliary db.

Hi all,
We require daily clone for our setup due to testing and other reason. Can we replace only database via RMAN Clone?
R12 clone with RMAN Auxiliary DB. Find below steps, if I am wrong correct me.
1.     run autoconfig on apps tier.
2.     perl <AD_TOP>/bin/admkappsutil.pl and Synchronize appsutil on db tier.
3.     Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)
4.     adpreclone.pl dbTier
5.     adpreclone.pl appsTier
6.     copy source to target including db and apps tiers.
7.     perl adcfgclone.pl dbTechStack .
8.     create duplicate db (auxiliary db) from rman backup.
9.     sqlplus "/ as sysdba" @adupdlib.sql so
10.     perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )
11.     exec FND_CONC_CLONE.SETUP_CLEAN;
12.     perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)
13.     perl adcfgclone.pl appsTier
please correct my steps.
thanks in advance,
sandeep

Hi,
3.     Run autoconfig on dbtier or adconfig.sh <contextfile>) (which is correct? i am using autoconfig not with contextfile)Run $ORACLE_HOME/appsutil/bin/adconfig.sh contextfile=$CONTEXT_FILE appspass=apps -- See (Note: 603104.1 - Troubleshooting RapidClone issues with Oracle Applications R12) for details.
10.     perl adcfgclone.pl dbconfig <CONTEXT_NAME.xml> (This gives error, I am skipping this step. I have tried with perl adcfgclone.pl database but then also its give error. )What is the error?
12.     perl adcfgclone.pl dbTier (if we run perl adcfgclone.pl dbTechStack ,Is this step require?)After running "perl adcfgclone.pl dbTechStack", you need to run "perl adcfgclone.pl dbconfig <Database target context file> -- See (Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone) and (Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12) for details.
Regards,
Hussein

R12 clone IBM-AIX issue-URGENT

Hi;
I cloned my system wihtout problem and all concurent are up. But when i run active users from request its ended wiht error.The con. log files gives me:
Could not load program xx/CLON/APPS/apps/tech_st/10.1.2/bin/rwrun:
Dependent module libde.so could not be loaded.
Could not load module libde.so.
System error: No such file or directory
Program exited with status -1
I checked this path in prod and my clon server and fie exsits.
Any idea?
Edited by: aaaaa on Dec 5, 2009 10:24 PM

Hi Hussein;
I run adrelink and i have this error:
mv /xx/CLON/APPS/apps/apps_st/appl/fnd/12.0.0/bin/FNDSCH /xx/CLON/APPS/apps/apps_st/appl/fnd/12.0.0/bin/FNDSCH.sav
rm -f /xx/CLON/APPS/apps/apps_st/appl/fnd/12.0.0/bin/FNDSLOAD
adrelink: error: program FNDSM is not writable.
Please make sure that the Unix userid running this program has write
permissions on it, and that it is not in use. If the program FNDSM
is in use, please make sure to terminate it before relinking
Oracle Applications.
adrelink is exiting with status 1
End of adrelink session
Date/time is Sun Dec 6 17:59:26 MEST 2009
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /xx/CLON/APPS/apps/apps_st/appl/admin/CLON/log/adrelink.lsv
New copy is /xx/CLON/APPS/apps/apps_st/appl/admin/CLON/log/adrelink.log
An error occurred while relinking application programs.
Continue as if it were successful [No] :
I said no and i checked path APPS/apps/apps_st/appl/fnd/12.0.0/bin/FNDSLOAD and this path owner is applclon:dba user

After R12 clone, Source SID appears in users' personal homepage

Hi, After cloning an R12.1.3 instance, users logging into the Target instance see the name of the Source instance in the banner of their personal homepage. How can this be rectified? Apps dba's have run all standard cloning processes (in Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]). Verified Source SID does not appear in Target context files, additional autoconfig run in Target - still getting Source instance name.
Thanks for any thoughts

user1083814 wrote:
Hi Helios, I should have mentioned, that the profile option "Site Name" was already set to the Target environment name. That sets the name correctly in the Forms headers. But it does not affect the name in the banner of the users' personal home page (a html page, not forms). So the problem is still there.What page you are referring to? Could you upload a screenshot?
Thanks,
Hussein

Oracle 9i DB Installation Problem on AIX 4.3.3

Hi,
I tried to install Oracle 9i DB on AIX 4.3.3 with Maintainence Level 9. However, I got the following error:
Calling action unixActions2.0.1.4.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
undoMakeFileName =
installArguments = ORACLE_HOME=/usr/opt/oracle/product/9.0.1,
logFile = /usr/opt/oracle/product/9.0.1/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Can anyone know what is the problem here?
Thanks and hope to hear from you soon.
Nelson

Hi,
we have noticed the same error !!!!!!! :-(
doing the makefile statement by consolle we have:
"$ make -f rdbms/lib/ins_rdbms.mk ioracle
- Linking Oracle
rm -f /usr/oracle/product/9.0.1/rdbms/lib/oracle
ld -b64 -o /usr/oracle/product/9.0.1/rdbms/lib/oracle -L/usr/oracle/product/9.0.1/rdbms/lib/ -L/usr/oracle/product/9.0.1/lib/ -bbigtoc /usr/oracle/product/9.0.1/rdbms/lib/opimai.o /usr/oracle/product/9.0.1/rdbms/lib/ssoraed.o /usr/oracle/product/9.0.1/rdbms/lib/ttcsoi.o /usr/oracle/product/9.0.1/lib/nautab.o /usr/oracle/product/9.0.1/lib/naeet.o /usr/oracle/product/9.0.1/lib/naect.o /usr/oracle/product/9.0.1/lib/naedhs.o /usr/oracle/product/9.0.1/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /usr/oracle/product/9.0.1/rdbms/lib/defopt.o -lknlopt -lslax9 -lpls9 -lplp9 -bE:/usr/oracle/product/9.0.1/rdbms/lib/plsqlncomp.exp -lserver9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 `cat /usr/oracle/product/9.0.1/rdbms/lib/nmliblist` /usr/oracle/product/9.0.1/rdbms/lib//jox.o -laurora -bE:/usr/oracle/product/9.0.1/rdbms/lib//oracle.exp -lwwg9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lwtcserver9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lserver9 `if /bin/ar -X64 tv /usr/oracle/product/9.0.1/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lsnls9 -lunls9 -lld -lm `cat /usr/oracle/product/9.0.1/lib/sysliblist` -lm -bI:/usr/oracle/product/9.0.1/lib/pw-syscall.exp -bI:/usr/oracle/product/9.0.1/lib/ksms.imp
ld: 0711-317 ERROR: Undefined symbol: ksbdpt_
ld: 0711-317 ERROR: Undefined symbol: ksmsgl_
ld: 0711-317 ERROR: Undefined symbol: ktswh196_
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
make: The error code from the last command is 8."
We hope in a fast solution.......
Thanks,
Daniele Tinti
Valerio Balbi

HELP!!! Listener problem on AIX 4.1 with oracle 7.2.2.0

When I try to do "lnsrctl start" (or stop) the server give to me the error below:
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=ora7))
TNS-12224: TNS:no listener
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
IBM/AIX RISC System/6000 Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1526))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
On metalink, solutions are client side, but I have this problem on server side.
I try to change host name to ip add, but problem persist.
I try to reboot server (because I think the problem was the oracle istance) but the db works correctly.
What can I do?
thank u so much!!!
pedro

Hello Pedro,
Please can you tell me if you resolved this issue you were having and how did you resolve this. I am having the same issue now....
We did a restore to a different box and now cannot connect to the database and having same issues you described.
Your help will be appreciated,
Regards
Avishkar Bandu

Oracle 12c ASM Disk Problem on AIX

Hi All,
We need to install 12.1.0.2 DB with ASM option on AIX 7.1. When we start to install 12.1.0.2 grid installation, in the 3.step we could not show adding Candidate disks to ASM. Disks right are 660 and oracle:oinstall ownership.
When we start to install 11gR2 installation on same platform we can see the Candidate Disk, and We can install 11gR2 ASM+DB on same platform. But for 12.1.0.2 is not.
How can we add Candidate Disks to 12c ASM İnstallation for below step ? The disks which is not shown for this step are like below. After first error I have changed disks' ownership like oracle:asmadmin, it isn't solved. I need urgent help.

Hi Sve,
Thanks for replying me. What you have written are tried but not works. I have solved problem.
The problem is related AIX platform. I have Solved problem with below steps.
1- I have installed grid infrastructure with Software Only option.
2- After install Software Only Standalone Grid, I have tried to install manually ASM instance. But I have taken this error. rtld: 0712-001 Symbol CreateIoCompletionPort was referenced and it is solved with this MOSC ID: Doc ID1949184.1)
3- After Successfull 2.step you can now install ASM manually from asmca.

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

ODI Lightweight Designer Installation Problem on AIX

Hi guys,
I have installed oracledilwd on OAS 10.1.3.1.0 and encountered a problem while accessing the same.
The installation for ODI 10.1.3.5 has been done on IBM AIX 5.2 and the deployement of oracledilwd.war on the OAS instance.
the master and work repositories have been crated as weel as the data sources.
I have got the metadata navigator working but although the Lightweight designer got successfully deployed the .war file for the same yet when i test the lwd application i am returned "HTTP 500 - Internal server error" and on checking the ascontrol.log file
This is what i get..
*WARN jmx.JMXUserManager _store.319 - Exception received during persist user info.*
com.phaos.ASN1.ASN1FormatException: java.lang.ArrayIndexOutOfBoundsException
at com.phaos.cert.PKCS12Safe.input(PKCS12Safe)
at com.phaos.cert.PKCS12Safe.<init>(PKCS12Safe)
at com.phaos.cert.PKCS12.input(PKCS12)
at com.phaos.cert.PKCS12.<init>(PKCS12)
at oracle.security.pki.OracleKeyStoreSpi.b(OracleKeyStoreSpi)
at oracle.security.pki.OracleSecretStore.setStoreInWallet(OracleSecretStore)
at oracle.security.pki.OracleWallet.setSecretStore(OracleWallet)
at oracle.sysman.ias.studio.jmx.SecureWalletManager.setEntry(SecureWalletManager.java:129)
at oracle.sysman.ias.studio.jmx.JMXUserManager._store(JMXUserManager.java:307)
at oracle.sysman.ias.studio.jmx.JMXUserManager.setCredential(JMXUserManager.java:250)
Can you guys give any insight regards to the same, am not having any clue.
Cheers
Dhrubo
Edited by: Dhrubo C on Aug 28, 2009 8:02 PM

Hi Dhrubo,
May be this is an issue with the JVM(IBM).Check Once.
Thanks,
katukota

Tv-out clone problem

hi!
I recently re-installed my entire computer. the problem is that I can't watch movies when the settings are set to clone mode anymore. I can see my desktop but the media player screen are black on the TV.
(I haven't installed any service pack yet though... )
//el mumriko

I managed so solve the problem.
I believe that I set the television as primary screen and then re-installed the driver to the monitor.
Not sure though... went back and forward so many times that I kind of lost myself...
main point is that their is a solution.=)

Weird Terminal problem with AIX

Hi,
I have kind of an odd problem with the Terminal.app that I hope someone can assist me in figuring out.
I'm connecting to an AIX 5.3 server and the top portion of the window is always "cut off". It's there, it's just one screen up in the buffer and I can't figure out why. I can connect with iTerm and things display appropriately.
Below is a link to a side by side picture of Terminal.app (left) and iTerm (right). If I scroll up in the Terminal.app buffer, I can see the missing lines from the top of the screen.
http://picasaweb.google.com/andy.black10/Misc#5407855064094337554
Thanks,
Andy

Minor point: would you please fill in your Forum profile information, at least the Mac OS X operating system version.
I'm currently using Leopard and I can reproduce this problem in Terminal vs iTerm. I used your script output (thank you) in order to generate the escape sequences.
BY THE WAY, if the script output contains any sensitive login info, you might want to change your password on the Pharamcy OSU system
It looks like there is a Terminal problem handling Scrolling Regions as set by <esc>[1;24r. It looks like <esc>[0J is not erasing from the current cursor position to the end of the display, but rather it starts the erase above the current cursor position. The erase behavior without a scrolling region appears better, but not perfect.
I would encourage you to file a bug with Apple at either:
<http://www.apple.com/feedback/macosx.html>
or
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter
The BugReporter would be better.
If you want, I have a little script that can be used to demonstrate the problem
#!/usr/bin/env bash
echo -e "e[1;24re[He[0Je[He[0Je[?6he[1;24re[He[0Jc"
for j in {1..3}
do
echo BEFORE should remain on screen $j $j $j $j $j
done
for j in {4..23}
do
echo FILLER should be erased $j $j $j $j $j
done
echo -e "e[4;24re[He[0Jc"
for j in {4..23} # our next command prompt will be 24th line
do
echo AFTER should remain on screen $j $j $j $j $j
done
Here is example output from Terminal:
BEFORE should remain on screen 1 1 1 1 1
AFTER should remain on screen 4 4 4 4 4
AFTER should remain on screen 5 5 5 5 5
AFTER should remain on screen 6 6 6 6 6
AFTER should remain on screen 7 7 7 7 7
AFTER should remain on screen 8 8 8 8 8
AFTER should remain on screen 9 9 9 9 9
AFTER should remain on screen 10 10 10 10 10
AFTER should remain on screen 11 11 11 11 11
AFTER should remain on screen 12 12 12 12 12
AFTER should remain on screen 13 13 13 13 13
AFTER should remain on screen 14 14 14 14 14
AFTER should remain on screen 15 15 15 15 15
AFTER should remain on screen 16 16 16 16 16
AFTER should remain on screen 17 17 17 17 17
AFTER should remain on screen 18 18 18 18 18
AFTER should remain on screen 19 19 19 19 19
AFTER should remain on screen 20 20 20 20 20
AFTER should remain on screen 21 21 21 21 21
AFTER should remain on screen 22 22 22 22 22
AFTER should remain on screen 23 23 23 23 23
and here is example output from iTerm:
BEFORE should remain on screen 1 1 1 1 1
BEFORE should remain on screen 2 2 2 2 2
BEFORE should remain on screen 3 3 3 3 3
AFTER should remain on screen 4 4 4 4 4
AFTER should remain on screen 5 5 5 5 5
AFTER should remain on screen 6 6 6 6 6
AFTER should remain on screen 7 7 7 7 7
AFTER should remain on screen 8 8 8 8 8
AFTER should remain on screen 9 9 9 9 9
AFTER should remain on screen 10 10 10 10 10
AFTER should remain on screen 11 11 11 11 11
AFTER should remain on screen 12 12 12 12 12
AFTER should remain on screen 13 13 13 13 13
AFTER should remain on screen 14 14 14 14 14
AFTER should remain on screen 15 15 15 15 15
AFTER should remain on screen 16 16 16 16 16
AFTER should remain on screen 17 17 17 17 17
AFTER should remain on screen 18 18 18 18 18
AFTER should remain on screen 19 19 19 19 19
AFTER should remain on screen 20 20 20 20 20
AFTER should remain on screen 21 21 21 21 21
AFTER should remain on screen 22 22 22 22 22
AFTER should remain on screen 23 23 23 23 23

Problem about aix and java.util.Date

Hello,
I am using AIX 5.1 with JDK 1.4 and i got a problem
using this JDK 1.4
I was using the jdk 1.2.2 and it gets to me the correct
date from the system ... i've never exported any environment
variable like lc_type, lang , etc ...
but now, using jdk 1.4, i get wrong time, one hour less,
can i have to export some environmental variable? which ones?
because i've tried with LANG=es_ES , LC_TYPE and it doesn't
work
thank you
[email protected]

It seems to have to do with default time zone.
You can consider explicitly defining the time zone you want the dates to be formatted against.

Clone problem

The clone tool has acted different over the last week, after I alt/click and move the cursor, the whole picture moves with it, I have reset the tools, no luck, it's still the same, it's not the space bar or shift causing it. Help!!!

I clone every week using SD! and have never had a problem. I clone to a LaCie 160GB drive, formatted as Mac OS Extended Journaled. As I remember it, it took a couple of hours (and this was a long time ago, so I might be way off) to clone about 30GB of data. Since then, of course, the backup times have been much less, since it only backs up changed data.
You might want to try reformatting your external drive, and then try cloning again.
Miriam

JRockit 1.4.2 array clone problem

JRockit 1.4.2 throws an IllegalAccessError on array cloning code produced by javac
-target 1.4.2. This seems to be the same problem as Sun's bug #4750641 (fixed
as of 1.4.1_01). JRockit 8.1 works okay. The problem also occurs with code produced
by a current version of IBM's jikes compiler.
To reproduce:
public class a {
public static void main(String[] args) {
new int[10].clone();
When compiled with "javac a.java", it works okay. When compiled with "javac -target
1.4.2 a.java", JRockit throws an IllegalAccessError.

I can confirm this problem. We are working on a fix for the next service
pack. Thanks for the bug-report!
Regards,
/Staffan
Nathan Bronson wrote:
JRockit 1.4.2 throws an IllegalAccessError on array cloning code produced by javac
-target 1.4.2. This seems to be the same problem as Sun's bug #4750641 (fixed
as of 1.4.1_01). JRockit 8.1 works okay. The problem also occurs with code produced
by a current version of IBM's jikes compiler.
To reproduce:
public class a {
public static void main(String[] args) {
new int[10].clone();
When compiled with "javac a.java", it works okay. When compiled with "javac -target
1.4.2 a.java", JRockit throws an IllegalAccessError.

R12 clon problem On AIX

Similar Messages

Maybe you are looking for