HELP!!! Listener problem on AIX 4.1 with oracle 7.2.2.0

When I try to do "lnsrctl start" (or stop) the server give to me the error below:
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=ora7))
TNS-12224: TNS:no listener
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
IBM/AIX RISC System/6000 Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1526))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
On metalink, solutions are client side, but I have this problem on server side.
I try to change host name to ip add, but problem persist.
I try to reboot server (because I think the problem was the oracle istance) but the db works correctly.
What can I do?
thank u so much!!!
pedro

Hello Pedro,
Please can you tell me if you resolved this issue you were having and how did you resolve this. I am having the same issue now....
We did a restore to a different box and now cannot connect to the database and having same issues you described.
Your help will be appreciated,
Regards
Avishkar Bandu

Similar Messages

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

### Problem in retrieving special characters with Oracle 9i JDBC drivers

hi,
We are having some problem with retrieving special characters like '�' from the database.
Our application is using JDK1.3.1 with Oracle 9i at the back end(Version: 9.0.1.0.0). We are using oracle 9i thin drivers (classes12.zip) for database interaction.
To relieve the data from database we are using PreparedStatement in two ways
1. Creating a preparedstatement from connection object without any parameters and then retrieve the
data using it. This gives the results in correct format i.e. special characters like '�'
2. Create the preparedstatement by passing the following parameters.
i) ResultSet.TYPE_SCROLL_INSENSITIVE
ii) ResultSet.CONCUR_READ_ONLY
In this case we are not able to retrieve the special character like '�' correctly. Instead the ResultSet
returns 'h'
I think this is the problem with Oracle drivers. Does anyone have any information about the mentioned problem.
rgds

I don't know exactly (because I am using JDK 1.4 with ojdbc14.jar where these problems seem to be rare...) but you may consider this:
1. Add nls_charset12.zip to your classpath to ensure that the encoders are present (may or may not help)
2. Swith to JDK 1.4, and do this:
Instead of String s = getString(column)
use
byte[] bytes = getBytes(column);
ByteBuffer bb = ByteBuffer.wrap(bytes); // in package java.nio
CharBuffer cb = Charset.forname("ISO-8859-x").decode(bb);
String s = cb.toString();
The latter method allows you to perform the encoding/decoding manually.
3. Change the character encoding in the database to unicode upon database setup.
4. Try playing with NLS parameters (alter session ...)

Problem in SAP Server installation with Oracle DB

Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.G

Hello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer

Problems dual booting Windows Vista with Oracle Enterprise Linux 4

I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer

TNS listener problem when migrating access app to oracle

I am migrating an access 2000 DB and application to oracle 8i. I have done this successfully on my test machine many times. I am working on the customers machine, and the problem is when I go to migrate the access application, it will not connect to oracle b/c of the TNS listener. The workbench tool ask for a username, pwd, and ODBC driver, but there is no place to put the oracle service name. I ran into this problem at home and I appended the service name onto the password with the '@' symbol, which works for oracle anyway. Like this, 'pwd@sname'. It worked at home, but I keep getting an error here that tns could not resolve service name. When migrating the data, there was a field to put the service name in, but not for migrating the application. I have tried variations in the ODBC driver also, but with no luck. Any other ideas?

Hello,
Is it possible that odbc driver is nor properly installed? If so you may have to re-instlal the odbc driver. If not try out the following steps:
* Go to DataSources [On win2k: start -> settings ->control panel ->Adminsitrative tools -> Data Sources (ODBC)]
* Click Add for the user DSN [say "testDSN"], and select oracle driver here [check if you have oracle 8 driver, if not you may want to install one]
* In the "Oracle ODBC Driver Configuration" window, give you your oracle databse connection details, click the "Test Connection button", it will ask for username and password, give system's username and password
* Use this DSN [testDSN] name in the migration work bench
Thank you and kind regards,
Srinivas Nandaanam

Need some help on data encryption in Forms 6i with Oracle Database.

Hi,
Here is my requirement:
I have a username and a password field, and i can add new users to it and ofcourse set a password for it.This password will be visible as asteriks on the forms but i want it to entered in the encrypted format in the database in the designated table.Can anyone help me with this.(hope my question is clear!!!)
Thanks,
Aparna.
null

Hi,
try it in the follwing very simple way:
translate each character of the password to it's ascii value and add a constant value you like. e.g. i = asc(substr(pwstring,i,1)) + k. concatenate each char-value of i(whitch have to be a fix length string of f.e. 4 digits) to build op the encrypted string. you can rich up this by calculating k in differents ways like:
K = offset + i. and by the way this encryption can call n times, mean encrypt the encryption, if you want.
the decryption is yout turn ;-)
hope this will help you...
Regrads
biki
null

Help needed to use only SQR reporting with Oracle 10g

I have very old SQR reports (ver 2.28) that are still being used by connecting SQR to an Oracle7 DB. We have migrated the data from Ora7 to Oracle 10.2.0.4. The issue is that SQR 2.28 is not able to connect to Oracle 10.2.0.4. Hence I want to use the new version of SQR that is part of OBIEE.
I am not familiar with OBIEE and my interest is only using the SQR portion of it.
1. Can any one help me as to how to go about installing SQR portion of OBIEE on a Linux Itanium 64-bit box? My Oracle 10.2.0.4 DB is also running on the same box.
2. What are the minimum components of OBIEE I need to install to make use of SQR ?
3. Any other relevant information
Thanks.

When installing webgate, make sure the Access Server is running. You will get this error if Access Server is down or not reachable. ( Make sure from the machine where you are installing webgate you can ping to Access Server by Name).
Thanks
Ram

Problem sync Satellite Forms data with Oracle 8i Lite through iConnect Consolidator.

I receive following exception in the hotsync log:
java.lang.Exception: Compose raw metadata not implemented for SMSE
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.lite.sync.palm.SMRL4PRecord.composeRawMetaData(SMRL4PRecord.java:126)
at oracle.lite.sync.HeliosSession.<init>(Compiled Code)
at oracle.lite.sync.HotSyncSession.RunTime(Compiled Code)
OK Oracle with 1 message(s)
This is when I after installed the satellite forms performes a sync.
I use PalmV with PalmOS 3.3, performes the sync with HotSync through iConnect Consolidator for Oracle 8i Lite 4.0.0.2.0
In the Satellite Forms App Designer I have check the Oracle Lite option in the property form.
This happends for both the sample forms and the one I have created.
I use the Satellite Form 3.0 beta 2, is there a new release and where can I find it ?
Anyone with any ideas to solve this ?
Thanks in advance !
/Patrik

Hello Patrik,
Did you resolved this problem ? I have the same error message. Please, let me know what i can do.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Patrik Strid ():
I receive following exception in the hotsync log:
java.lang.Exception: Compose raw metadata not implemented for SMSE
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at oracle.lite.sync.palm.SMRL4PRecord.composeRawMetaData(SMRL4PRecord.java:126)
at oracle.lite.sync.HeliosSession.<init>(Compiled Code)
at oracle.lite.sync.HotSyncSession.RunTime(Compiled Code)
OK Oracle with 1 message(s)
<HR></BLOCKQUOTE>
null

Needed help on connecting weblogic 8.1 SP5 with oracle 10g and mysql 5.0

Hi !!
Hope you are doing well...
Can anyone tell me how to connect weblogic 8.1 SP5 with an oracle 10g DB on windows..
also, how to connect weblogic 8.1 SP5 with mysql 5.0 on windows..
Please step by step... very urgent..
Thanks!! Jhonson

Shouldn't this be posted in BEA forums?
Try getting help there and if you encounter any Oracle related exception, you can post here.

Problems on connecting Developer/2000 with Oracle

1. Can Developer/2000 for window95/NT release 2.0 connect with Personal Oracle8i for Windows 98 under Windows 98 environment?
2. Can Developer/2000 for window95/NT release 2.0 connect with Personal Oracle7.3 for Windows 95 under Windows 98 environment?
3. What is the default database name of Personal Oracle8i for Windows 98?

If you get an error message with a number, did you try looking for this number in the oracle errors book (online on OTN? just click search).
Developer/2000 is quite old, better get the newer versions from otn.oracle.com.

Problem in getting jdbc connection with oracle for win 98

This is my code given below
import java.sql.*;
public class Oconnection
Connection conn;
Statement st;
PreparedStatement pst,pstissue,pstret,pstbook;
public Oconnection()
try
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:orcl","system","manager");
catch(Exception ex)
System.out.println(ex.getMessage());
ex.printStackTrace();
public static void main(String args[])
new Oconnection();
*****************************************************8
Error
C:\Library>java Oconnection
Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:169)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:211)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:324)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:266)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at Oconnection.<init>(Oconnection.java:17)
at Oconnection.main(Oconnection.java:39)
I am using Oracle for win95 or i think it is oarcleforwin98 .
The sid of my database i found through query given was orcl, what changes should i do in the code so that it works.
should i use another driver coz i am using latest driver from oracle.com which is for oracle 8i. if a need a driver change where can i download it from please help me

http://forum.java.sun.com/thread.jsp?thread=291584&forum=48&message=1305045

Problem using JDBC Thin driver with Oracle 8i Personal Edition

Hi all, I have an issue I have been unable to figure out. In order to make my code as portable as possible I am using the JDBC thin driver to access my database. I have been able to connect to an instance of Oracle 8i on a Sun box by hardcoding the following string into getConnection() call:
conn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=<myhostname>)(Port=1521))(ADDRESS=(COMMUNITY=tcp.w orld)(PROTOCOL=TCP)(Host = <myhostname>)(Port = 1526)))(CONNECT_DATA = (SID = <mysidname>)))", <myuser>, <mypassword>);
My problem is that I cannot figure out what string to use to connect to my local instance of Oracle 8i Personal. I used the following string (the sid I got from the looking at the init.ora file):
conn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=localhost)(Port=1521))(ADDRESS=(COMMUNITY=tcp.world)(PRO TOCOL=TCP)(Host = localhost)(Port = 1526)))(CONNECT_DATA = (SID = orcl)))", "scott", "tiger");
That didn't work, so I took the only entry found in my tnsnames.ora file in as:
conn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0)))(CONNECT_DATA = (SID = PLSExtProc)(PRESENTATION = RO)))", "scott", "tiger");
I am not knowing what is wrong, but that didn't work neither. Any suggestions would be highly appreciated.
Thanks....
null

try this:
conn = DriverManager.getConnection("jdbc:oracle:thin:scott/tiger:@hostname:1521:sid");
or use system/manager as username/passward
null

Help how to connecting Oracle SQL Developer 3.0 with Oracle Database 11g

Hello,
I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
Thanks,

885173 wrote:
EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
-Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/

Oracle 11g upgrade in AIX 6.1 with HACMP

Hi Friends,
As i have two Power Servers running in AIX 6.1 with oracle 10g in HACMP in which SAP application is running.
The one is standalone Database and other is central Instance.
I have done the 11g upgrades successfully in my DEV and QAS servers which are non-cluster Environment.
Now i want to do the same upgrade in PRD which is in HACMP.
Please let me know what are the areas should i concentrate specially for cluster environment servers.
Thanks,
Hari

DB Filesystems
Filesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/hd4 4.00 2.62 35% 15438 3% /
/dev/hd2 8.00 5.03 38% 57744 5% /usr
/dev/hd9var 4.00 2.85 29% 10914 2% /var
/dev/hd3 4.00 3.50 13% 2575 1% /tmp
/dev/fwdump 1.00 1.00 1% 13 1% /var/adm/ras/platform
/dev/hd1 1.00 1.00 1% 6 1% /home
/dev/hd11admin 0.25 0.25 1% 107 1% /admin
/proc - - - - - /proc
/dev/hd10opt 1.00 0.58 43% 9040 7% /opt
/dev/livedump 0.25 0.25 1% 7 1% /var/adm/ras/livedump
/dev/lv_oracle 2.00 1.86 8% 21 1% /oracle
/dev/lv_ora_pip 2.00 2.00 1% 80 1% /oracle/PIP
/dev/lv_usr_sap 2.00 1.92 5% 78 1% /usr/sap
/dev/lv_sapmnt 2.00 0.62 70% 978 1% /sapmnt
/dev/dumplv 95.00 32.80 66% 26790 1% /dump
/dev/saparchlv 2.00 1.99 1% 57 1% /home/pipadm
/dev/lv_pip_64 10.00 5.73 43% 18988 2% /oracle/PIP/102_64
/dev/lv_mirlogA 1.00 0.61 40% 6 1% /oracle/PIP/mirrlogA
/dev/lv_mirlogB 1.00 0.61 40% 6 1% /oracle/PIP/mirrlogB
/dev/lv_oraarch 200.00 121.48 40% 433 1% /oracle/PIP/oraarch
/dev/lv_oralogA 1.00 0.59 41% 8 1% /oracle/PIP/origlogA
/dev/lv_oralogB 1.00 0.59 41% 8 1% /oracle/PIP/origlogB
/dev/fslv01 2.00 1.97 2% 102 1% /oracle/PIP/saparch
/dev/lv_sapbkp 5.00 5.00 1% 40 1% /oracle/PIP/sapbackup
/dev/lv_sapchk 5.00 5.00 1% 80 1% /oracle/PIP/sapcheck
/dev/lv_data1 200.00 86.26 57% 30 1% /oracle/PIP/sapdata1
/dev/lv_data2 200.00 84.92 58% 26 1% /oracle/PIP/sapdata2
/dev/lv_data3 200.00 84.92 58% 26 1% /oracle/PIP/sapdata3
/dev/lv_data4 200.00 84.92 58% 26 1% /oracle/PIP/sapdata4
/dev/lv_data5 200.00 84.92 58% 26 1% /oracle/PIP/sapdata5
/dev/lv_data6 200.00 84.92 58% 26 1% /oracle/PIP/sapdata6
/dev/lv_data7 200.00 84.92 58% 26 1% /oracle/PIP/sapdata7
/dev/lv_data8 200.00 84.93 58% 26 1% /oracle/PIP/sapdata8
/dev/lv_saporg 20.00 20.00 1% 7 1% /oracle/PIP/sapreorg
/dev/saptrance 5.00 4.92 2% 588 1% /oracle/PIP/saptrace
/dev/lv_inventry 2.00 1.99 1% 55 1% /oracle/oraInventory
/dev/lv_102_64 10.00 5.05 50% 11044 1% /oracle/stage/102_64
CI
/dev/hd4 4.00 1.99 51% 14429 3% /
/dev/hd2 8.00 5.01 38% 57680 5% /usr
/dev/hd9var 4.00 3.38 16% 10936 2% /var
/dev/hd3 4.00 3.82 5% 1362 1% /tmp
/dev/fwdump 1.00 1.00 1% 18 1% /var/adm/ras/platform
/dev/hd1 1.00 1.00 1% 55 1% /home
/dev/hd11admin 0.25 0.25 1% 5 1% /admin
/proc - - - - - /proc
/dev/hd10opt 1.00 0.58 42% 9024 7% /opt
/dev/livedump 0.25 0.25 1% 8 1% /var/adm/ras/livedump
/dev/lv_oracle 2.00 2.00 1% 9 1% /oracle
/dev/lv_ora_pip 2.00 2.00 1% 52 1% /oracle/PIP
/dev/lv_usr_sap 10.00 10.00 1% 17 1% /usr/sap
/dev/lv_client 2.00 1.86 8% 16 1% /oracle/client
/dev/lv_smnt_pip 10.00 2.20 78% 114142 18% /sapmnt/PIP
/dev/lv_sap_pip 10.00 8.10 19% 1577 1% /usr/sap/PIP
/dev/lv_sap_cms 5.00 5.00 1% 8 1% /usr/sap/ccms
root@pagedb:/ $ su - orapip
pagedb:orapip 1> echo $ORACLE_HOME
/oracle/PIP/102_64
i have upgraded successfully in my DEV and QAS.
So can i go with the same procedure as i went with non-cluster Env.
Thanks

HELP!!! Listener problem on AIX 4.1 with oracle 7.2.2.0

Similar Messages

Maybe you are looking for