R12: Creating Descrptive Flexfields in R12- Supplier Entry Form ...

Hello:
In R12- Suppliers , is there a new way for creating descriptive flexfields than the way it is used to be created in the past ?
I am looking for the name of the descriptive flexfields for Additional Information Section in the Supplier Orgaizations tab. I cannot find them anywhere ...
Yesh

Srini:
The below is what the Metalink note states .....
+" In R12, the Descriptive Flexfield (DFF) is defined the same way as in 11i, using the Descriptive Flexfield Segments form. Once it has been defined, you can see it in the Organization page of the Supplier form under the heading "Additional Information".+
But I cannot find this DFF anywhere .... what is the name of this DFF and under which application (Payables, ISupplier, etc) ?
Thanks - Yesh

Similar Messages

How to disable Create Supplier Tab In Supplier Inquiry Form In Ap Res

Hi,
How to disable Create Supplier tab in supplier Inquiry form in AP Responsibility without effecting the supplier entry form. I did the following setups but it is disable in supplier entry form also. Please help me it is very urgent.
1. Log into your System Administrator responsibility.
2. Navigate to Security > Responsibility > Define
3. Query the Payables responsibility you want to only have Inquiry access.
4. Under Menu Exclusion area, set the following:
Type = Function
Name = Supplier Full Access : Buyer View (POS_HT_SP_ACCESS_FULL )
5. Save and test this responsibility.
Thanks in advance,
Raju.

I guess you have followed the steps mentioned in the note
R12: How Can You Prevent Suppliers From Being Created in Supplier Inquiry [ID 473346.1]
which means that you need to have separate responsibility for the Supplier Inquiry. You cannot have Supplier Inquiry and Suppler Entry in the same responsibility,please have separate responsibilities. Please make sure you are not having inquiry and entry in the same responsibility.
Also there are some bugs, please review the note
R12: Still Able to Update Supplier Banking Data From Supplier Inquiry Responsibility with Excluded Function Supplier Full Access: Buyer View [ID 1089925.1]

User field in goods entry form

Is it possible to create a user field in goods entry form production? I tried but It's possible only to fill the order production. thanks

To add user defined fields to either the issue from production or the receipt from production then you need to add the user fields to the marketing document rows. Then if they are not visible in the forms you will need to use the form settings.
Regards,
Adrian

Remarks field in Journal Entry form

Hi All,
I am wondering how is created the Remarks field in Journal Entry form? It contains a string which describes the journal entry origin and sometimes it contains the Business Partner Code. I would like to know the origin table, field of the string (only the string without BP Code).
I would like to write a query which contains all available TransType, and one string remark field for every TransType field.
I wrote the following, but it is not good because the string contains Business Partners Code, more than one line for each TransType field, and doesn't contain every existing TransType type.
SELECT DISTINCT convert(integer,TransType) As TransType, LineMemo from JDT1 ORDER BY TransType
Thanks,
Zoltan

Zoltan,
there is not any single table which determines the remarks or memo for Journal entry. in the documents from which, account posting happens (such as invoice) , you will find a field called jrnlmemo in accounting tab (in master table such as OPCH). also, the transtype in OJDT can help you build the case for your query.
HTH,
regards,
Binita Joshi

Error Page -AP: Suppliers Entry

Hi,
R12.1.1 on Win2k3.
Supplier creation getting error page.
AP: Suppliers > Entry
Appear a web page with error message.
Error Page – You have encountered an unexpected error, contact Admin…..
Same error page getting in Define Bank:
AP: Setup > Payment > Banks and Bank Branches, /and Bank Accounts.
How to resolve the problem?
Thanks,
Jo

Please see if these MOS docs help.
Attempt To Open Supplier Form Errors: You Have Encountered An Unexpected Error [ID 816174.1]
Supplier Form Is Not Opening: Error Page You Have Encountered An Unexpected Error [ID 956156.1]
When attempting to open Bank, Branch, Bank account Error: You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 1332649.1]
Access To Manage Bank Account Errors:You Have Encountered An Unexpected Error [ID 947142.1]
Thanks,
Hussein

Can not Create Address Book for new Supplier

Hi,
I am trying to create a supplier in R12. Under create Address Book for the supplier, I have created the address and when I select the operating unit and click apply, I am getting the following error:
Address and Site Creation - Unable to create address and sites because of the following error when trying to create the site in operating unit [Anirudh Operations]: [ORA-01403: no data found in Package AP_VENDOR_PUB_PKG Procedure Validate_Vendor_Site]. Either resolve this issue and try again or deselect the operating unit with the error and continue. Note: any new address requires at least one site in order to be created.
Oracle Version: 12.0.4 - Vision Database.
Am I doing something wrong here?
Any help is much appreciated.
Thanks & Regards,
Sasibindu.

Looks like the responsibility you are using is pointing to a new operating unit created by some one. But for that operating unit all the fundamental options are not complete (financial, purchasing, payables and so on). Hence you are getting this error.
If they are setup, you can try adding this operating unit into your security group associated to the MO: Security group profile and try.
If not use the Vision Operations responsibility and give it a try.
Thanks
Nagamohan

11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

Hello Sir,
As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
(patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>ls -lrt
total 13992
-rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
-rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
p7461070_R12_AIX64-5L.zip
p9179588_R12.AD.B_R12_GENERIC.zip
p9477107_R12.AD.B_R12_GENERIC.zip
drix10:/fmstop/patches/R1211AD/merge>
drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
Error: Invalid option: -s
usage: admrgpch -help
admrgpch <source_directory> <destination_directory>
admrgpch -s <source_directory> -d <destination_directory>
[-verbose <level>] [-merge_name <pattern>]
[-manifest <filename>] [-logfile <filename>]
where
* -help Print help message.
* -verbose <level> Can be one of: { 0(SILENT),
1(QUIET), 2(VERBOSE) or 3(LOUD) }
Default - 1(QUIET).
* -merge_name <pattern> The name of the merged patch (max 24 characters).
Default - "merged".
* -s <source_directory> Path of source directory where all patches to be
merged have been unzipped.
* -d <destination_directory> Path of destination directory where the merged
patch will be created.
* -manifest <filename> Full pathname of a file containing the list of
patch zip files to be merged.
* -logfile <filename> Admrgpch log file name.
Default:"<CWD>/admrgpch.log".
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Without option -admode :
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 44 files of 876...
10% complete. Copied 88 files of 876...
15% complete. Copied 132 files of 876...
20% complete. Copied 176 files of 876...
25% complete. Copied 219 files of 876...
30% complete. Copied 263 files of 876...
35% complete. Copied 307 files of 876...
40% complete. Copied 351 files of 876...
45% complete. Copied 395 files of 876...
50% complete. Copied 438 files of 876...
55% complete. Copied 482 files of 876...
60% complete. Copied 526 files of 876...
65% complete. Copied 570 files of 876...
70% complete. Copied 614 files of 876...
75% complete. Copied 657 files of 876...
80% complete. Copied 701 files of 876...
85% complete. Copied 745 files of 876...
90% complete. Copied 789 files of 876...
95% complete. Copied 833 files of 876...
100% complete. Copied 876 files of 876...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
admerge.pl:
$Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

Hi Srini,
Thanks a lot !
Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
-rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009 admrgpch
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
        0509-150   Dependent module libnnz10.so could not be loaded.
        0509-022 Cannot load module libnnz10.so.
        0509-026 System error: A file or directory in the path name does not exist.
Then I sourced R12 environment file and ran same command. Its completed successfully.
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 45 files of 883...
10% complete. Copied 89 files of 883...
15% complete. Copied 133 files of 883...
20% complete. Copied 177 files of 883...
25% complete. Copied 221 files of 883...
30% complete. Copied 265 files of 883...
35% complete. Copied 310 files of 883...
40% complete. Copied 354 files of 883...
45% complete. Copied 398 files of 883...
50% complete. Copied 442 files of 883...
55% complete. Copied 486 files of 883...
60% complete. Copied 530 files of 883...
65% complete. Copied 574 files of 883...
70% complete. Copied 619 files of 883...
75% complete. Copied 663 files of 883...
80% complete. Copied 707 files of 883...
85% complete. Copied 751 files of 883...
90% complete. Copied 795 files of 883...
95% complete. Copied 839 files of 883...
100% complete. Copied 883 files of 883...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.

Supplier entry - Any process flow ideas?

Hello,
This is a question beyond the Oracle Applications itself...I believe.
We are reviewing our processes and found that the Supplier Entry is taking more time than we thought and worst, several errors are being encountered.
Our Supplier Entry flow is as follows:
1. The buyer collects data from the new supplier (by email and corporate letters)
2. The buyer sends emails to Finance and Accounting, notifying about the new supplier record.
3. Accounting replies that email, asking for detail information on the new supplier, so they can assign the proper accounting combinations for liability and pre-payment (those accounting combinations depend on the supplier type and country of the supplier)
4. Finance asks information about the bank account of the supplier.
5. The buyer sends the proper information to Finance and Accounting. Accounting replies with te proper accounting combinations.
6. Finance receives information on the bank account. Enters the new supplier bank account.
7. The supplier record is created by someone at Purchasing (restricted responsibility)
8. Finance assigns the bank account to the supplier.
As you see...it can take time!
And worst, some times there are a lot of new suppliers to be entered on Oracle.
I'm sure there are better ways to do this.
Please, be kind and share some ideas on this topic.
Thanks in advance for your help!
Regards.

Hi,
You can use customized form, workflow and APIs to reduce the time and communication error. through workflow notification you can send email to supplier for bank details.
Our Supplier Entry flow is as follows:
1. The buyer collects data from the new supplier (by email and corporate letters)
2. The buyer sends emails to Finance and Accounting, notifying about the new supplier record.
A: Build one customized form and give access to buyer. Buyer enter main supplier data and send it to finance throgh notification (workflow).
3. Accounting replies that email, asking for detail information on the new supplier, so they can assign the proper accounting combinations for liability and pre-payment (those accounting combinations depend on the supplier type and country of the supplier)
B: They will fill the accounting information on Customized form which open through the notice.
4. Finance asks information about the bank account of the supplier.
5. The buyer sends the proper information to Finance and Accounting. Accounting replies with te proper accounting combinations.
6. Finance receives information on the bank account. Enters the new supplier bank account.
C: Buyer should enter the email address of supplier on the form. Through the email address, finance will send an automatic mail to supplier for bank information.
7. The supplier record is created by someone at Purchasing (restricted responsibility)
8. Finance assigns the bank account to the supplier.
D: Finance will Assing the bank account once the information will get from supplier. And the whole record (customized table) will transfer into Oracle Application through API.
Note: You need one developer who have knowlege of OA framework / Oracle web form developer, work flow and API knowledge.
Regards,

How to update sales order number (KAUFN) characteristic in the profitability segment of the PA document created at the time of service entry sheet confirmation, as a result of shipment cost document

Hi,
We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
Regards,
Sandeep

Hi Ajay,
Thank you for the quick update.
The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
Regards,
Sandeep Kulkarni

Is there a way to create entry form/fields in Numbers.

Can anyone let me know if there's a way to create an entry form/field in Numbers. The idea would be to have already created a list of contacts, then at an event on an iPad, people can check off if that person is there and also enter new contact info. Thanks in advance.

Isnt this just a table? A list of people, with a check box field in the second column, followed by a few columns for contact info to be entered in?
Jason

How to create exchange grid in web entry form...

Hi to all,
I am new to HFM..my query is How to create exchange grid in web entry form...i try it a lot but it didn't get the solution...
i did this exchange grid in web grid..any one can share the document or ppt or video clip related to this..which will be helpful for me...
Thanks

Hi...
Its better to create the Exchange Rates in a Data Form than in an Data Grid, so that you can easily Import and Export the form and even can feed the values easily....
Select the POV like in Scenario-Actual,Year-Your particular year,Period-In Period Dimension do not choose any option so that it can be selected in Columns and Rows,View--the same as Period Dimension,Entity-[None],Value-<Entity Currency>,Account-Do Not select ,ICP- [ICP None],Custom 1-[None], Custom 2-[None], Custom 3-[None], Custom 4-[None]...
In Columns Select Scenario -Actual,Period-{[Fourth Generation]},Currency-#USD(Default Currency)
In Rows Select-Account-A#AVGRATE,View-w#Periodic,Currency-C2#EUR
A#AVGRATE.w#Periodic.C2#CFA and so on for rest of the currencies....
and same in the below rows for the Closing Rates---- A#CLORATE.w#Periodic.C2#EUR
A#CLORATE.w#Periodic.C2#CFA
This might help you.....

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

How to create the multi-realm (or multi-entries)in one Directory instance?

how to create the multi-realm (or multi-entries)in one Directory instance?
I have installed a new iplanet Directory Server 5.2 on a win2k box, named "vp.com1.com"
When I installed this server, it helped me to create a new Directory server instance with the default realm "dc=com1,dc=com".
I could log on console and found root node, which is "com1.com"
expanded this root node, I got a tree as following:
"com1.com" -> "vp.com1.com" -> "server group" -> "Directory Server(VP)"
Then open "Direbory Server(VP)" -> click tab "Directory"
Got a tree as following:
vp.com1.com(389) --> dc=com1,dc=com
o=NetscapeRoot
Now I wanna create a new entries, which is "dc=com2,dc=com"
How to do?
I had checked almost all the related doc but failed to get the valuable info.
Would you like to do me a favour? Or forward me some reference?
Because I'm a new guy for iplanet Directory Server, would you pls me the help in detail.
This task is very urgent for me, so really appreciate your early help!

Look on page 87 of the Sun ONE Directory Server 5.2 Administration Guide. The section "Creating a New Root Suffix Using the Console" should give you step-by-step instructions.

Can I create a data entry form?

I have inherited a large Excel spreadsheet and would like to create a data entry form to input/view data without continually scrolling horizontally. Is this possioble please?
Many thanks,
Gary

Data entry forms and other alternate views of data are best made in a database application. Spreadsheets like Excel or Numbers show data in rows and columns and that's it. If there are two many rows or columns to fit on a page, scrolling is unavoidable. Ditto for tables in Word or Pages.
A database can create displays that put all related data on a single screen or page.
Mac databases include Filemaker and Bento (by the same company). I'm sure there are others, I've just never heard of them.
Good luck,
Terry

Creating data entry form/screen dynamically

How does one create web application data entry form/screen dynamically? One part of screen will have the option to bring up forms so that users can create forms. DO i need any sort of markup language?
Examples please.

use javascript. use the buttons on one panel and forms on another panel.
for buttons onclick events change the form "action" and send the hidden parameters you want.

R12: Creating Descrptive Flexfields in R12- Supplier Entry Form ...

Similar Messages

Maybe you are looking for