R12 DB clone from RAC - ASM DB to Non RAC DB

Dear Friends,
I am using E-Biz- R12 PROD with 11g R2 RAC database.
I have an R12 DEV Instance (single node with Non RAC).
I want to perform DB clone from RAC - ASM DB (PROD) to Non RAC DB (TEST)
I am using RMAN backup on PROD database.
Please provide me the Metalink Note / steps to perform the same.
Regards,
DB

Please provide me the Metalink Note / steps to perform the same.Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
Thanks,
Hussein

Similar Messages

ASM in a non-RAC environment

Gurus,
what are the advantages, if any, of running ASM in a non-RAC environment?
Thanks.

Any raid (that actually provides multiple disks in a
LVM) will nullify the performance gains of raw that
are associated with disk head contention.
Any disk subsystem with front-end RAM cache will
nullify the rest of the performance gains of raw
disk.
Any 'RAID-5 is good' argument under a database
assumes large and efficient cache.Unfortunately, we can't just discount RAID-5, since it is far too cost-efficient an option these days, with 10, 20, 30+ TB databases. Plus, the storage vendors actually make it efficient enough that it performs almost as well as RAID 1+0.
Multiple disks on the storage subsystem and RAM caches (for reads and writes) are still important and valuable performance enhancements. Remember that your storage subsystem is much more efficient at this than your database or server (since it's designed to do it!). True, it doesn't have knowledge of the database files, their content, and their usage, but you do, and can therefore intelligently configure the subsystem and place the data files.
ASM does nothing more intelligent than stripe the data across all of the available disks. The best part about it is the ability to dynamically grow the groups. The problem with it is that it thwarts the read-ahead cache of the storage subsystem. And, while Oracle will intelligently 'read-ahead', it can't optimize where the heads are on the disk, or take into consideration the 10 other servers accessing the same storage subsystem.
The problem with ASM doing the striping is that, for large databases, you will typically have hundreds of disks underneath the covers. If you gave the OS and then Oracle that many devices, what do you think would happen? It would step all over itself and seriously impair your ability to access the devices in parallel. Whereas, if you group 4 or 8 devices together, the storage subsystem will access them together in parallel for the OS.
So, don't discount your storage box... But yeah, use RAID 1+0 rather than RAID-5 (4,3) when possible!

PRD with RAC and DR with non-rac datagaurd

Is it possible to implement production with RAC database and DR with non-rac datagaurd.
if yes, how does the log shipping happening from different nodes of RAC to one DR node?
Can anybody answer please?
Thanks
Vignesh.

There is also a very good MAA whitepaper on this szenario:
MAA 10g Setup Guide: Creating a Single Instance Physical Standby Database for a RAC Primary Database
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.pdf

How do we clone a database from RAC/ASM to RAC/ASM?

Is there a best practice or recommended recipe for cloning from a RAC/ASM instance to another RAC/ASM instance? We've done single instance cloning in the past with RMAN and it looks like grid control does something similar -- until we try to clone from one Exadata cluster to another. Surely this is now a common procedure...?
much thanks,
Gary

Hi,
I would not use cloning with 11.2. anymore.
Though this will work (you have to take care of copying some more stuff though, like the gpnp profile), simply using the "addnode.sh" which works in silent mode in 11.2. is a lot easier.
Re: Any issues to add 3rd node to 11gr2 grid with 11.2.0.2 and 10.2.0.4 homes?
Regards
Sebastian

Steps to Convert R12 Non-Rac to RAC database with ASM

dear All,
We have following environment.
R12.0.6 with a non RAC 11.2.0.2 database on on AIX (64bit). Datafiles are stored local filesystem. We want to do the following.
Migrate the database file to ASM
convert database Non RAC to RAC
we have gone through many oracle support documents but were unable to decide which path we should adopt. Any body who has done similar activity; please share only highly level steps. No step by step Instructions are needed. e.g. Install Grid Infrastructure (for single instance or the one which comes with cluster home???????), Move datafiles to ASM etc etc
Please make sure the steps are for 11gR2 and EBS R12.
Best Regards,

we have gone through many oracle support documents but were unable to decide which path we should adopt. Any body who has done similar activity; please share only highly level steps. No step by step Instructions are needed. e.g. Install Grid Infrastructure (for single instance or the one which comes with cluster home???????), Move datafiles to ASM etc etc
Please make sure the steps are for 11gR2 and EBS R12. The steps in [ID 823587.1] which is referenced above should be sufficient (from your post, I understand that you have covered the steps in this doc) -- What exactly you have issues with?
Thanks,
Hussein

How to apply archivelogs from 2 node rac to non-rac

Is there any way to apply the archivelogs from 2 node RAC to sinlge node non-rac instance while migrating RAC to non-rac.
Could anyone clarify it?
-Shanlee

There's no "different way".
Each instance in RAC write's to it's own Redo Thread -- so each has it's own set of ArchiveLogs. In the log_archive_format specification %t is the thread identifier.
Oracle needs the ArchiveLogs from both Threads of the 2 node RAC. When you issue a RECOVER DATABASE, it applies them in the correct (interleaved) sequence.
What you have to do is to ensure that the ArchiveLogs of both threads are available on the new server.
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 1, 2011 5:09 PM

Convert ASM single instance to RAC ASM instance...

Hi, all
Im installing OracleDatabase with RAC and I got an error on the Database Configuration Assistant that says "The ASM instance configured on the local node is a single instance. To manage this instance as a single-instance ASM restart DBCA and select the single instance database option. To manage this instance as RAC ASM, convert it to RAC ASM first".
How I can convert it??
Thanks

See the link below for converting a single instance ASM to RAC ASM. The link is to the Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide for Linux. If your platform is not Linux, check the Install Guide for your OS.
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14203/cvrt2rac.htm#BABJDAJG

Can I use data guard to create a RAC standby database for a non RAC primary

Hi,
we need to RAC our production database but the normal methods will mean a long outage. It is possible to create a standby as a single node RAC database and when ready do a graceful failover to the standby database and open it for business. The next step would be to create another RAC node from this on the original server.
servers are already cluster aware, using ASM etc
Oracle 10.2

Yes, you will be able to setup RAC stnadby for a non-RAC Primary. For primary it just needs a available destination for redo shipping it doesn't matter whether it's RAC enabled or not. And ofcourse you are using 10.2 anyway only one node will be running MRP and that is too in standby mount mode.
However since you have are using You may follow below sequence.
1. Setup a new standby as RAC enabled.
2. Perform a switchover.
3. Shutdown the Old primary (which is standby now).
4. Install CRS and RDBMS on the old primary and it's new node.
5. Modify the cluster_database=TRUE and cluster_database_instances=<required number of instances>.
With above modification mount the standby database in standby mode and start MRP.
6. Introduce the database and instances to the OCR using SRVCTL add command.
7. Once you your database is synchronized with Primary do a switchover.
9. Now you can repeat step 3 to 6 on the other site too. <- if you need your secondary site to be RAC enabled too
10. Finally both the sites should be RAC enabled.
Hope this is helpful!!!
Thanks,
Asif Haliyal

What advantages/disadv to having a none-rac db datafiles on rac clusterware

Hello,
We have a rac 10.2.0.3 with ocfs2 files on linux 4. We want to create a none-rac database on one of the rac nodes. The none-rac 10.2.0.4 is in its own new separate oracle home. Would it be a bad idea to use the existing ocfs2 mountpoints for the none-rac datafile locations? What would be adv/dis-adv to using ocfs2 for none-rac database files? Thank you.

I will disagree of if a non-RAC database should use CFS or not. Since the file systems in use are clustered I see no reason to use a non-clustered file system and by using a CFS should the server the database is built on fail you can with a few minor edits start the database on the other node. If you used a traditional file system to hold the non-RAC database then its data files would not be accessible to the remaining node.
Placing the Oracle database on CFS then starting it from another node in the advent of failure is one of the early high availability (quick recovery) methods. This kind of set up was not uncommon in the VMS (DEC) world back in the late 1980's and early 1990's.
Also what if at a future data you determine you want to convert the database to RAC? It will be easier if the database is already on a CFS.
IMHO -- Mark D Powell --

Restore RAC to Non-Rac database

I am new to RAC and I was wondering if anyone has documentation or they have restored themselves a RAC database to a Non-RAC database. Could someone please help me.

Hi
Here are the steps that may help you:
Archive your redologs, take the rman backup and then run the rman duplicate and clone upto the SCN you want.
Hope this Helps
Regards

Clone from ASM to non ASM

Hi,
Can you please help me in getting steps for EBS cloning from ASM to non ASM in non RAC to RAC environment.

What is your application release?
All Rapid Clone docs can be found in:
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database [ID 760772.1]
Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
Thanks,
Hussein

R12 Cloning RAC ASM to Single

Hi,
customer has 3 environments: 2 single (dev and pre) and 1 RAC-ASM (prod). We are doing the first complete refresh from PROD to PRE, then from RAC to Single, following Note Cloning Oracle Applications Release 12 with Rapid Clone [Article ID 406982.1] , which has a reference to Cloning an Oracle RAC System, which refers to follow Note Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1].
Following this Note, you have to create a Database Image in an stage directory, then you need unless the same database size as free space for this db image. This is not an option for very big application databases, then our idea is not to create the db image, but cloning database separatelly, following steps in Option6 in cloning Note 406982.1.
The question is, we have to refresh DB and app tier from PROD (RAC ASM) to PRE (single), colud we ignore Note " Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]" and follow Clone Article ID 406982.1 specially Option 6, recovering PROD database separatelly with rman duplicate or we have to follow Note 559518.1 and create a db image? Any experience cloning R12 from RAC to single?
Thanks,
Alvaro

Hi All
Can any one provide step to step configuration for RAC to RAC cloning in EBS R12
How to clone multi tier (2 node application Tier) using adcfgclone ... Thanks in Advance.
Searched Below metalink notes
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
Regards
Subbu

How to restore (not duplicate) DB from RAC ASM to non ASM

Hello everybody,
i am trying to recover db from RAC+ASM to non ASM no RAC node. I am running Oracle 10g (10.2.0.4) on Win2003 Server. I have functional backup from my prod system.
Here are my steps:
*1. On prod server i make backup running this script in RMAN*
configure channel device type 'SBT_TAPE' parms'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=e:\backup)';
RUN {
backup device type SBT_TAPE database tag zal20081129;
SQL 'alter system archive log current';
backup device type SBT_TAPE archivelog ALL tag zal20081129;
*2. I prepared clon instance on another server (The same Oracle version) and start it to nomount mode.*
*3. I copied the backup from prod server to clon server to exactly the same path. (e:\backup)*
*4. I connect to RMAN on my new node and I use the DBID parameter and I restore controlfile.*
rman
connect target /
set DBID 3079749916
startup nomount
run {
allocate CHANNEL CTAPE DEVICE TYPE 'SBT_TAPE' PARMS'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=f:\backup)';
allocate channel CDISK DEVICE TYPE DISK;
restore controlfile from 'f:\backup\78k91lrn_1_1';
alter database mount;
*5.Then I check the backup, crosscheck etc.*
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
169 Full 42.78G SBT_TAPE 01:12:54 04-MAR-09
BP Key: 169 Status: AVAILABLE Compressed: NO Tag: DATAFILES
Handle: 75k91hcj_1_1 Media:
List of Datafiles in backup set 169
File LV Type Ckp SCN Ckp Time Name
1 Full 928460863 04-MAR-09 +DATA/agost/datafile/system.272.668509367
2 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs1.273.668509387
3 Full 928460863 04-MAR-09 +DATA/agost/datafile/sysaux.263.668509393
4 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_data.298.668509401
5 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_index.258.668509401
6 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_blob.259.668509401
7 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.274.668509405
8 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.275.668509533
9 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_data.260.668509661
10 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_index.261.668509661
12 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs2.264.668509661
13 Full 928460863 04-MAR-09 +DATA/agost/datafile/users.265.668509667
14 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.270.668510837
15 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.299.668510843
16 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.300.668510859
17 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.301.668510865
BS Key Size Device Type Elapsed Time Completion Time
171 1.98G SBT_TAPE 00:02:54 04-MAR-09
BP Key: 171 Status: AVAILABLE Compressed: NO Tag: ARCHIVE_LOGS
Handle: 77k91lm2_1_1 Media:
List of Archived Logs in backup set 171
Thrd Seq Low SCN Low Time Next SCN Next Time
1 790 927018133 03-MAR-09 927379509 03-MAR-09
1 791 927379509 03-MAR-09 927635333 03-MAR-09
1 792 927635333 03-MAR-09 927804715 03-MAR-09
1 793 927804715 03-MAR-09 928438198 04-MAR-09
1 794 928438198 04-MAR-09 928496353 04-MAR-09
1 795 928496353 04-MAR-09 928496667 04-MAR-09
2 941 927018173 03-MAR-09 927414357 03-MAR-09
2 942 927414357 03-MAR-09 927725821 03-MAR-09
2 943 927725821 03-MAR-09 927747874 03-MAR-09
2 944 927747874 03-MAR-09 927804436 03-MAR-09
2 945 927804436 03-MAR-09 928375778 03-MAR-09
2 946 928375778 03-MAR-09 928460503 04-MAR-09
2 947 928460503 04-MAR-09 928496341 04-MAR-09
2 948 928496341 04-MAR-09 928496660 04-MAR-09
*6. Then I run this script to restore and recover db.*
run {
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
*7. Everything goes well see under.*
RMAN> 2> 3> 4> 5> 6> 7>
executing command: SET until clause
executing command: SET until clause
Starting restore at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: starting datafile backupset restore
channel ORA_SBT_TAPE_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387
restoring datafile 00003 to +DATA/agost/datafile/sysaux.263.668509393
restoring datafile 00004 to +DATA/agost/datafile/ifsapp_archive_data.298.668509401
restoring datafile 00005 to +DATA/agost/datafile/ifsapp_archive_index.258.668509401
restoring datafile 00006 to +DATA/agost/datafile/ifsapp_blob.259.668509401
restoring datafile 00007 to +DATA/agost/datafile/ifsapp_data.274.668509405
restoring datafile 00008 to +DATA/agost/datafile/ifsapp_index.275.668509533
restoring datafile 00009 to +DATA/agost/datafile/ifsapp_report_data.260.668509661
restoring datafile 00010 to +DATA/agost/datafile/ifsapp_report_index.261.668509661
restoring datafile 00012 to +DATA/agost/datafile/undotbs2.264.668509661
restoring datafile 00013 to +DATA/agost/datafile/users.265.668509667
restoring datafile 00014 to +DATA/agost/datafile/ifsapp_index.270.668510837
restoring datafile 00015 to +DATA/agost/datafile/ifsapp_index.299.668510843
restoring datafile 00016 to +DATA/agost/datafile/ifsapp_data.300.668510859
restoring datafile 00017 to +DATA/agost/datafile/ifsapp_data.301.668510865
channel ORA_SBT_TAPE_1: reading from backup piece 75k91hcj_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=75k91hcj_1_1 tag=DATAFILES
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 01:25:12
Finished restore at 04-MAR-09
Starting recover at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
starting media recovery
channel ORA_SBT_TAPE_1: starting archive log restore to default destination
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=1 sequence=794
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=2 sequence=947
channel ORA_SBT_TAPE_1: reading from backup piece 77k91lm2_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=77k91lm2_1_1 tag=ARCHIVE_LOGS
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 00:02:26
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC thread=1 sequence=794
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC thread=2 sequence=947
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC recid=1563 stamp=680629925
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC recid=1562 stamp=680629925
media recovery complete, elapsed time: 00:00:13
Finished recover at 04-MAR-09
*8. Then when i want to open database*
using command 'Alter system open resetlogs;' I got this error:
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/05/2009 07:26:03
RMAN-06003: ORACLE error from target database:
ORA-00600: internal error code, arguments: [kgeade_is_0], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/]
In the alert log I have got this error: (for every log group)
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+FLASHBACK/agost/onlinelog/group_4.260.668510637'
ORA-17503: ksfdopn:2 Failed to open file +FLASHBACK/agost/onlinelog/group_4.260.668510637
ORA-15001: diskgroup "FLASHBACK" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
ORA-00312: online log 4 thread 2: '+DATA/agost/onlinelog/group_4.268.668510633'
ORA-17503: ksfdopn:2 Failed to open file +DATA/agost/onlinelog/group_4.268.668510633
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
So obviouslly database wants to open online logs in the path like ASM. Which is wrong. What should I do to tell database to open it according to init.ora parameters
*.db_create_file_dest='e:\oradata\agost'
*.db_create_online_log_dest_1='e:\oradata\agost'
Any suggestions???
Thanks

Hi,
thanks for you quick answer. But I do restore to the local file system, even if the log says:
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387 .....
all the datafiles are correctly restored. I think oracle uses the parameter db_create_file_dest and creates the files there.
I tried also the script with SET NEW NAME:
run {
Set newname for datafile 1 to 'e:\oradata\AGOST\system.272.668509367';
Set newname for datafile 2 to 'e:\oradata\AGOST\undotbs1.273.668509387';
Set newname for datafile 3 to 'e:\oradata\AGOST\sysaux.263.668509393';
Set newname for datafile 4 to 'e:\oradata\AGOST\ifsapp_archive_data.298.668509401';
Set newname for datafile 5 to 'e:\oradata\AGOST\ifsapp_archive_index.258.668509401';
Set newname for datafile 6 to 'e:\oradata\AGOST\ifsapp_blob.259.668509401';
Set newname for datafile 7 to 'e:\oradata\AGOST\ifsapp_data.274.668509405';
Set newname for datafile 8 to 'e:\oradata\AGOST\ifsapp_index.275.668509533';
Set newname for datafile 9 to 'e:\oradata\AGOST\ifsapp_report_data.260.668509661';
Set newname for datafile 10 to 'e:\oradata\AGOST\ifsapp_report_index.261.668509661';
Set newname for datafile 12 to 'e:\oradata\AGOST\undotbs2.264.668509661';
Set newname for datafile 13 to 'e:\oradata\AGOST\users.265.668509667';
Set newname for datafile 14 to 'e:\oradata\AGOST\ifsapp_index.270.668510837';
Set newname for datafile 15 to 'e:\oradata\AGOST\ifsapp_index.299.668510843';
Set newname for datafile 16 to 'e:\oradata\AGOST\ifsapp_data.300.668510859';
Set newname for datafile 17 to 'e:\oradata\AGOST\ifsapp_data.301.668510865';
Set newname for tempfile 1 to 'e:\oradata\AGOST\temp.276.668509397';
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_1.257.668509351'' TO ''e:\oradata\AGOST\REDO02.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_2.257.668509357'' TO ''e:\oradata\AGOST\REDO03.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_2.258.668509361'' TO ''e:\oradata\AGOST\REDO04.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_3.266.668510623'' TO ''e:\oradata\AGOST\REDO05.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_3.259.668510627'' TO ''e:\oradata\AGOST\REDO06.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_4.268.668510633'' TO ''e:\oradata\AGOST\REDO07.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_4.260.668510637'' TO ''e:\oradata\AGOST\REDO08.LOG'' ";
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
But it gives me this error in RMAN:
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG''
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/06/2009 10:48:55
RMAN-20000: abnormal termination of job step
RMAN-11003: failure during parse/execution of SQL statement: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG'
RMAN-11001: Oracle Error:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
and in alert log i have got this:
Errors in file c:\oracle\product\10.2.0\admin\agost\udump\agost_ora_3200.trc:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
Fri Mar 06 10:48:55 2009
ORA-600 signalled during: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG' ...
dont know what to do.
There must be way how to recover it. I think my first try (without SET NEWNAME) is closer to the end, there is only need to "repair" the online logs.
Any other suggestions?
thanks

Restore RAC database from non-RAC source - EBS R12.1.1

We have restored (PIT) a RAC database from a non-RAC (but ASM) source and I was wondering if that was a reasonable thing to do.
The reason I ask is that I seem to remember that in the upgrade to R12.1.1 the upgrade driver had a different list of jobs to do when the target was RAC vs when it was non-RAC... so is it possible the EBS R12.1.1 code is different for RAC (meaning we dont have the right code base in the DB since we restored a non-RAC source to a RAC destination)?
Disclaimer - I am NOT a DBA .. just trying to identify some potential problems we are troubleshooting.
Thanks in advance!
EBS R12.1.1
OEL 5
11gR2

We have a RMAN back up of the non-RAC database that was restored and PIT recovered on the RAC database.Is it a full database backup?
The "code" base I am referring to is all the db stored objects for R12 EBS .. database compiled code.Restoring the RMAN backup on the target node is not enough. Have you run AutoConfig or postclone? Does your instance know that this is a a single instance and not a RAC one?
I am nervous that there may be alternate versions of the code to run in RAC vs non-RAC .. for instance I know that some of the ASCP jobs use DBMS PIPES and that can be tricky with RAC and Concurrent Manager.. And when we did the upgrade to R12, pointing it @ RAC generated more and different jobs than when it was not pointed @ RAC .. so SOMETHING was different according to the APPS ADPATCH/ADADMIN utilities.Please explain in details what is the purpose of doing this restore and what exactly you are trying to achieve. What cloning procedure you follow to refresh the target instance?
Thanks,
Hussein

Updgrade from 11.2.0.1 to 11.2.0.3 on 2 node Rac -ASM ON windows 2008 r2

Hi Guys,
We are going to upgrade our 24x7 system (2 node RAC ASM On windows 2008 R2) from 11.2.0.1 to 11.2.0.3. I appreciate if any one let me know the oracle my support document no. or step by step guide.
Regards,

Hi,
You can check the id for upgrade
Doc ID 1276368.1
Doc ID 837570.1
HTH

R12 DB clone from RAC - ASM DB to Non RAC DB

Similar Messages

Maybe you are looking for