R2880 taking paper through and discharging without printing

Using an Epson R2880, had for a while, no problems at all. Now have major issues with being unable to print. The paper is taken through the printer and discharged without printing at all.
Tried absolutely everything, drivers, re-set, etc, etc, blah blah! Totally sick to death of it, why is it we're in the middle of 2011 and all I want to do is print from my Mac???
I am incidentally very experienced in all things Mac and Printer. I run the creative department in a design agency, been using Macs since early 90's!!!! This is costing us ridiculous sums in wasted time!!
Come on Apple and Epson, we are loyal customers who spend a small fortune with you guys - LETS GET THESE BANAL PROBLEMS SORTED!

I've never seen that one!
While waiting in the hope that "someone" will know the cause, I suggest you try the two generic fixes I try for all print problems:
First, Reset the Printing System:
http://support.apple.com/kb/PH14141
If that doesn't help, restart from the Recovery partition, and use Disk Utility to repair the hard drive and repair permissions:
http://support.apple.com/kb/ht4718
(just read the first paragraph)

Similar Messages

D5560, feeds paper through but doesn't print!

This is my second D5560, the first printed over the edges of the paper and was replaced by HP.
This one though, also seems to have issues..
If I try to print anything, it will feed the paper through, stop then spit it back out.. Sometimes it will then try to take another bit of paper and will have it stuck halfway into the printer unless I press cancel.
Any ideas? Is this another faulty printer or what?
I've tried it on my PC and laptop, one on windows 7 and other on Vista.
Thanks
David

HI,
Try to follow this troubleshooting document to address this issue, click here. Using the workaround mentioned under the Windows Vista category will commonly help resolve the issue.
Hope this helps!
Kiko

HP Laserjet M401A could not set different paper size and tray on printer properties

Good morning all. I'm experiencing a issue setting custom paper size and tray in this printer properties. I would like to set up three different printers, on the same port, to print directly on a specific tray (without enter the printer properties and select the proper tray and size). I have this printer with the additional third tray. I have set up A4 in tray 1 (bypass), custom size in tray 2 and 3 on the printer. When i enter the printer PROPERTIES i want to set up set custom paper size in tray 2 and 3. No way.The only sizes i can see is 13x8, a4, a5, letter, legal, and so on (there are maybe 7 choices). So i choose NOT SPECIFIED. When i go on printer PREFERENCES, i can set up my custom paper size.But when i choose my custom paper size, the tray 2 and 3 go away and i can only choose bypass or tray 1.If i set up A5 (for example) the tray 2 and 3 re-appear. How is it possible? where i am wrong? Many thanks, any help would be appreciated.Cheers,Luca.

I have done extensive research online and looked for relevant posts in other forums, plus I downloaded a LaserJet 4L service manual. The verdict: A common cause of this no-power problem is a faulty DC controller board, blown fuse(s) on it, or other circuitry glitch. I am sure that the paper tray is inserted correctly.
So I decided to cut my losses (I'm not inclined to pull the printer apart to try to fix it--it's not worth my time) and tossed the printer. It's not cost-effective or time-effective to spend a lot of money or time to resuscitate old hardware, except perhaps as a learning exercise.
I consider this thread now closed.

My MG5320 will not print. The paper comes out but without printing.

My MG5320 will not print. Paper comes out but not printing.

Hi ts and andrea711,
We recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to appear on the page. To do this, please follow the steps located at the link below:
Print Head Cleanings
If blank pages still come out of the printer after performing the cleanings, please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

C309A PRINTER GIVES FALSE "OUT OF PAPER" MESSAGE AND WILL NOT PRINT WHEN TRYING TO PRINT ENVELOPES

When trying to print an envelope, I get an error message - "out of paper" and cannot proceed.

Hi novalani,
This could be as simple as dirty feed rollers but could require servicing in the end. See this article for feed problems. Give the steps a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Upgraded to CS5 and duplex landscape printing if way off

Since upgrading to Indesign CS5 from actually CS2, I cannot get landscape duplex printing to align properly (centered as it is on screen). I have troubleshooted the Print Setup dialog box to death and nothing fixes this issue. I've tried Centered, Centered Vertically, Centered Horizontally, I've tried to scale down to fit, nothing works properly. I've gone through and checked the Printer... options as well and nothing seems amiss there either. Why would updating from a previous version mess with the printer alignment?
I made a brand new 8.5x11 document with 2 pages with .25" margins all the way around which is my printer's smallest margin setting (Xerox 8560DN). I then simply drew a box around the entire document right along the margins on both sides.
When I print it, the front side is shifted over to the left so it prints 5/32 of an inch from the edge and the right margin is 11/32 from the edge. The back side is a bit less shifted to left with 7/32 and 9/32 margins.
I then tried printing a sheet that is in portrait mode and this comes a bit closer to with both sides off at the 7/32 and 9/32 margins.
I really need help figuring this out. The document that I need printed has a perforation going down the center and is folded so these margin differences are really skewing the print outs.
Thanks!
Christi
Update: I tried exporting it as a PDF and making sure Shrink to fit option was NOT selected and it still prints with the same issues. Darn, I was hoping that would solve it.

I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
The only thing different between those two weeks was the fact I updated to CS5.
But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
Thanks!
Christi

Printing envelope and cont. to print from phototray set made main tray in properties?????

envelope wizard keeps printing from phototray. have changed setting to main tray in properties and cont. phototray???

Unfortunately any image file sent to ePrint will automatically be printed out on photo paper with printers that have a seperate photo tray.
Depending on how you are ePrinting, you do have a few options though. If you are printing from a Apple or Android device, their is an app that will allow you to choose the paper size and type when printing.
For Apple products, you want the HP ePrint app.
For Android based devices, you want the HP ePrint Home & Biz app.
If you are printing from a computer, you can download the ePrint Mobile Driver and that will also give you those options.
Reply back with how you are printing and let me know if you need any help getting this set up.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Printing error message and failure to print from PhotoSmart

I can do all of the various photo functions in photosmart, but when I click on Print, I consistently get the "Printing Error:The slected paper size is too small for the current print size." At no point am I directed to select the paper size. I know the process because occasionally it has worked. There is no prompt for selecting paper size. For this reason, I have to defer to another photo printing program. Why can't I select a paper size and proceed to printing?

I have tried creating the profile again and still get the same problem. The problem is machine based and not user based.
Hi GG1234,
If you recreated the Outlook profile and still got the same problem, please try to recreate the Windows Profile:
Log on to client using local admin account->rename the profile folder under c:\users.
By the way, did you try to print the mails in OWA?
Frank Wang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Epson Stylus Photo R2880 feeds paper straight through without printing

So I recently got an Epson R2880 at work, and it at first it was awesome. After a few days, it started feeding paper straight through without printing (it doesn't even pretend to print) and telling me that the "Media [is] out or not loaded correctly". I went back and forth with Epson on it for a bit, and they ended up sending me a new printer.
The new printer seemed to work fine for a day or so, and then it started doing the same thing. If I turn it off and remove it from my printers list and then turn it back on and try again, sometimes it will make a print before starting to feed straight through again.
Here in the office, most of my printing consists of PDFs that I do through Acrobat XI. Some of them are borderless, some of them aren't. I have also tried printing from Preview and straight from InDesign CC and received the same results. I have tried multiple USB cables and my permissions are all in order.
I am running Mavericks 10.9.2 on a 2013 Mac Pro.
Since it seems fairly unlikely that I received two consecutive printers that have the same problem, I'm thinking that the problem is with something on my end. I'm willing to entertain the possibility that my luck really is bad enough to have two printers feed paper instead of print on it. I'm also willing to entertain the possibility that I'm an idiot and am repeatedly doing something idiotically. Regardless, I'm hoping that someone out there has some experience with this and can point me in the right direction, because holy cow this is annoying and Epson hasn't been super helpful.
Thank you for reading this.

I've never seen that one!
While waiting in the hope that "someone" will know the cause, I suggest you try the two generic fixes I try for all print problems:
First, Reset the Printing System:
http://support.apple.com/kb/PH14141
If that doesn't help, restart from the Recovery partition, and use Disk Utility to repair the hard drive and repair permissions:
http://support.apple.com/kb/ht4718
(just read the first paragraph)

When I try to print a test page The printer feeds the paper through the printer without printing

My printer is set up and Windows XP Home SP3 recognizes it. I have checked the Device Manager to see if I had any conflicts.
I didn't so I opened the print spooler and typed Test in Windows Notebook and hit print. It showed up in the print spooler but
the printer located the edge of the page then fed the paper through. I uninstalled the printer and Printer driver and also the software. After I rebooted Windows found the printer and let me load the drivers and I printed a test page afterward and it printed fine. But then it went back to just feeding the paper through.
I have the latest windows installer version 4.5 running. All of Windows updates are up to date. I'm lost can anyone Help me

'''bold text'''I've tried several different virtual pdf printer applications including:
Foxit pdf printer
doPDF v 7
Nitro PDF driver v5
NovaPDF
Simpo PDF Creator
qvPDF
Virtual PDF Printer
I took screenshots of the same small section of a sample pdf file saved to pdf using the virtual pdf printer freeware doPDF v7.
Both test screenshots were taken on the same computer, a laptop running Vista Home Premium.
You can clearly see the problem!

Deskjet 5550C: pages go through without printing

The deskjet 5550C, USB connected, has operated extremely reliably for years on different PCs, on my current PC (running XP pro SP3) since that was purchased in April 2008. The following problem started happening two days ago, no error messages. Nothing changed on my system between the time that the printer worked and when the problem started.
When I select the printer from any application (e.g. Notepad, Word, Adobe Reader) to print a page, the paper is drawn into the printer but then emerges straight out again without any printing. The only exception is if I open the 5550C deskjet printer assistant, choose Tools and updates/printer maintenance/print test page, click print, then a picture and the HP logo are printed. Also, if I click calibrate printer or if I change a cartridge, the calibration page prints OK.
If I conmnect another printer (Dell photo 928, also USGB connected) I can print properly from all apps. I have also run chkdsk /r, looked in device manager, tried different USB ports. Everything is OK with those, so I do not think there is any problem with the OS or PC hardware, it must be the printer or its software.
Things I have tried to diagnose/correct:
1. Downloaded, installed and ran the HP print diagnostic utility (v 1.5): all items have a green checkmark, but trying test print, again the paper feeds through without printing.
2. Disconnected the printer from mains, waited 1 minute, reconnected and let it reset: no change.
3. Completely uninstalled and reinstalled all printer drivers and software using the CD that came with the printer (driver version 5.5.2.0). No change. Checked for driver updates, HP automatic check says: you have the latest drivers. Again ran the diagnostic utility: all green checkmarks, but as before print test page page loads paper, feeds through without printing The above steps naturally included numerous PC restarts as well.
Any advice welcome. If this cannot be easily fixed, is the printer dead or is it worth trying to get it repaired?
EDIT: I found this post on the board with an apparently similar problem:
http://h30434.www3.hp.com/t5/Other-printing-questions/Deskjet-5550-prints-blank-page/m-p/122533
where the OP found that printing colour was OK and the problem was with the black cartridge. So I tried that, but again the page went though the printer without printing anything. So that and the faqct that calibration page prints OK from both cartridges shows that does not apply in my case.

Bumped, in the hope that someone can reply, thanks.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

HP Photosmart Premium C310a Printer paper alignment and paper feed problem.

Standard Info:
HP Photosmart Premium C310a Inkjet All-in-one Printer.
Windows 7 Home Premium
No reported errors messages except for paper jams.
No changes were made to the system before the problems began.
My Info:
I am very proficient with computers and electronics. I would first like to say that this printer has very vibrant inks and its ColorSmart/sRGB ICC profile is pure magic. The high DPI ratings have turned out to be accurate so far and the printer prints beautiful images.
Problems:
The problem I am having is with the printers paper feed rollers. They are not scrolling the paper through the printer accurately and consistantly. There have also been two paper jams when using multipurpose everyday paper. When printing high res artwork using HP Advanced Photo Paper I was using HP Photosmart Essentials to create an 8"x10" picture on the 8.5"x11" paper and the first 35-40 prints came out accurately but then, before any paper jams or other problems the 8x10 pictures began to not center correctly on the paper. Then the top of the 8x10 picture started slanting to the right on the paper and extending too close to the right edge of the paper. The entire 8x10 picture is no longer printing 8x10 (the left side of the picture is just over 8" tall and the right side of the picture is printing just under 8", same thing with the top and bottom edges of the image) and is not centering properly on the paper. I just had my second paper jam last night which I clicked the "cancel print" button on the front of the printer touch display to eject the paper. Immediately after, everything began printing very close to the left edge of the paper and prints at an angle down the sheet no matter what it is that I print or what paper it is printed on. I have tried using the auto alignment feature on the printer several times and it does not help.
Questions:
Is this printer purchased on 09/25/2011 from hp.com (with no extended warranty) still under a regular warranty?
If I send it in for repairs will HP be able to fix these problems?
Is there any way that I can adjust the scrollers myself to fix the problem?
Is the new C510a more reliable than the C310a in this field?
I need a backup printer for my art business, I would like to purchase an HP C510a, but am concerned I will have the same problems with the new one.
If anyone can help, please respond. I cannot go on with these problems any longer.
Thank you for your time,
Nanette

Thank you for your quick response Bob. Your answer was helpful, but did not solve my problem. I have cleaned the printer exactly as your response has suggested, but there has been no change, and I was not able to find any dirt, scum, dust, or anything at all wrong with the rollers.
Here are a few pictures of some 8"x10" pictures that I just printed on 8.5"x11" HP Advanced Photo Paper:
These 8"x10" images are supposed to be centered on the paper, but are FAR from centered or dimensionally accurate to 8"x10".
This last image shows really well how the top of the 8"x10" image slants downward from left to right as well as approaches too close to the right edge of the paper.
Is this a problem that I can fix on my own?
If I send the printer to HP for repairs will they be able to fix this problem or will they just clean the printer scrollers and send it back thinking it is fixed?
I really need help with this problem, because right now, the printer is not useable.
Thank you for your help.
-Nanette

Printers added and shared without access to printer properties - Server 2012

On a Server 2012 domain controller, without the Print Management role installed, I have added a network printer through ‘Control Panel’ > ’Devices and Printers’, shared it through group policy, and the domain
member computers are able to print to the shared printer. But the printer never showed up in ‘Devices and Printers’ folder on the server.
The problem comes in since there is no way to edit the settings of the printer. The print queue for the printer does show up in Device Manager. I right-click the printer and select ‘Properties’, open the ‘Settings’ tab, and follow the link that
states, “Please go to the Devices and Printers folder to manage your printer”.
But this just opens up the ‘Devices and Printers’ folder which, does show/contain my printers.
If you are asking why the Print Management role is not used, It is because this system is self-contained and the most minimal features are installed on all computers for security compliance reasons. Therefore we typically just install the printers
on the domain controllers (via Devices and Printers) and then share them via Group Policy to the small number of workstations on the segregated network.
Did the ability to bypass installation of a Print Management role, and still edit printer settings, change for Server 2012? (We were able to do this with Server 2008R2. However, I can’t find any specific Microsoft documentation describing the change.)
So to try to fix this issue on the affected system (from my explanation above), I installed the Print Management role but the printers I created in ‘Control Panel’
don’t show up in Print Management. I still have no way to access the printer settings. Do I have to reinstall the printers? How do I remove the old printers? Do I just remove the ‘Print queues’ from Device Manager?
I tried to replicate my issue on a test system domain controller, built with very similar installation scripts as the affected system above was. I added a printer via ‘Control Panel’ > ‘Devices and Printers’, shared them, and they do not show up. However,
when I then install the Print Management role, the printers I created in ‘Control Panel’
now show up in Print Management. This is different than my affected system above.
If anyone could provide any insight on why this is happening it would be much appreciated!
Thanks,
Dan

Most likely this is a security setting on the print shares. When you open Devices and Printers, the security token for BUILTIN accounts is not passed to the Explorer process so launching this User Interface as administrator does not contain the ADMIN security
token. If you have removed the Everyone group from the printer security, then the printer can disappear in this UI. For printer admin tasks you should use the tools provided by the print team Printmanagement.msc.
Adding the Print Role opens the spooler RPC endpoint ( which you can also do by sharing a printer ) and adds the tools.
Can you just add the tools without installing the Role?
dism /online /enable-feature /featurename:Printing-AdminTools-collection
Alan Morris Windows Printing Team

How to print of a crystal output on paper through process Scheduler in PeopleSoft.

Post Author: rajaumareddy
CA Forum: Charts and Graphs
while printing crystal through process scheduler in PeopleSoft it giving Error as Runstatus. and i given in Printer destination.
Could u help me to find solution.
1. what are process scheduler setup.
2. Is there any Sever side setup (Default server)

Srinivas, Thanks for your quick reply.
This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
Thank you,
Surya

R2880 taking paper through and discharging without printing

Similar Messages

Maybe you are looking for