R3load -testconnect fails while doing the Export Prepare

Hi All,
R3load -testconnect fails while doing the Export Prepare for the Unicode Conversion. I have upgraded the CRM system from CRM 4.0 to SAP Netweaver 7.0 with EHP1. Now I doing the Unicode Conversion. While using the sapinst as root to start the unicode conversion I am getting the following error:
/usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/CSX/SYS/exe/run/R3load: START OF LOG: 20090603143131
/usr/sap/CSX/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/CSX/SYS/exe/run/R3load: version R7.01/V1.4
Compiled Mar 10 2009 23:03:11
/usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/CSX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/CSX/SYS/exe/run/R3load: END OF LOG: 20090603143131
Regards
Karthik Ravoori

Hi,
These note May help you.
where are you placing the New executables.Always use /sapmnt/SID/exe.If you are placing them in /usr/sap/CSX/SYS/exe/run/ then you always get the error.
I found in one of the note the same error that you are getting.
Search in note with text DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
Note 459899 - SAP BW 3.0A Server Installation: UNIX/Oracle
This Note Talks about the verson you should have for the kernel
Note 898181 - Corrupt cluster record creates signal 11
Thanks
Rishi Abrol

Similar Messages

R3load -testconnect failed while installing SAP Solution manager

Hi
I'm trying to install sap solution manager, it gets to "abap import" and then gives an error. I think there is a problem with database connection.
Here is what I get in the log
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.2.xml'.
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.3.xml'.
INFO 2007-03-22 17:03:06
Execute step Component W2K_ServicePack_Check|ind|ind|ind|indPreprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-03-22 17:03:18
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.2.xml'.
INFO 2007-03-22 17:03:18
Execute step testDatabaseConnection of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\R3load.exe.log.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS.
INFO 2007-03-22 17:03:32
Output of C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2007-03-22 17:03:33
Execution of the command "C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output: sapparam: sapargv( argc, argv) has not been called.sapparam(1c): No Profile used.sapparam: SAPSYSTEMNAME neither in Profile nor in CommandlineC:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070322170332
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'saplvt' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2007-03-22 17:03:33
CJS-30023 Process call 'C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2007-03-22 17:03:33
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Any assistance will be rewarded.
Thanks in advance

Hi Louis
>>>snip<<<
For details see log file(s) R3load.exe.log.
>>>unsnip<<<
Or logon as <sid>adm and issue
R3trans -x
Then take a look at trans.log
Hth+Best regards
dirk

Error while Doing the export in FDM

Hi John,
I went through the following blog Planning V11 Drill back (http://john-goodwin.blogspot.com/2008/07/planning-v11-drill-back.html).
And i did in the same way as u have explained there ......
Import and validate is successfull for me and for export it is showing successful for me but the fish colour is not changing to orange colour.
And while adding Rules from Map option tab for Target Account it is showing two options
one is Zoom..... and another is Browse for taget values......
But when i clicked on Browse for taget values......option it is not showing anyting.
Where am i wrong ?Can u suggest me something so that i will be able to export my CSV file?
Thanks
Edited by: user11358816 on Jul 30, 2009 4:58 AM

Metalink Note:232120.1
Symptom(s)
~~~~~~~~~~
You are performing a database export against your 9.2 database. The database
export abnormally ends with the following errors:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Change(s)
~~~~~~~~~~
One of the known causes for the error above is that a patchset was recently
applied to the database but one or more of the patchset steps were not
performed.
[pre]Cause
~~~~~~~
View the readme notes for the patchset recently installed. You will see a step
that should have been performed that directs you to run the script named
catpatch.sql. Very likely this step was never performed.
Fix
~~~~
As the sysdba user run the catpatch.sql script found in the directory named
$ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
You may see that this script places the database in restricted mode.
Regards,
Reza
P.S: I think this issue is not related to "SQL and PL/SQL" Forum :-)

Error while doing the Export ...

About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user LRMSDBO_DEM
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user LRMSDBO_DEM
About to export LRMSDBO_DEM's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully

Metalink Note:232120.1
Symptom(s)
~~~~~~~~~~
You are performing a database export against your 9.2 database. The database
export abnormally ends with the following errors:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Change(s)
~~~~~~~~~~
One of the known causes for the error above is that a patchset was recently
applied to the database but one or more of the patchset steps were not
performed.
[pre]Cause
~~~~~~~
View the readme notes for the patchset recently installed. You will see a step
that should have been performed that directs you to run the script named
catpatch.sql. Very likely this step was never performed.
Fix
~~~~
As the sysdba user run the catpatch.sql script found in the directory named
$ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
You may see that this script places the database in restricted mode.
Regards,
Reza
P.S: I think this issue is not related to "SQL and PL/SQL" Forum :-)

Error while doing the repository export

hi,
I am getting error while doing the export repository,Message: GEN-13, Additional Message: Dictionary is not available on this database, can anyone help me how to resolve this issue.
thanks,
Sundar M

Hi Sundar,
Please provide the export repository command, what you used and the log file to review.
The error "Dictionary is not available on this database" will pop up when Siebel Repository is not present in DB.
For export process you have to give repository name as "Siebel Repository" and it will export schema in to *.dat file.
NOTE: Do not change Siebel Repository name for export process.
Thanks,
Shilpi

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.

Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?

Error while importing the export in new environment

All,
I have getting AIP-11052: Writing following objects: Transport Protocol Parameter failed due to following constraint violation: TRANSPORTPROTOCOLPARAMETER_UK. UNIQUE CONSTRAINT VIOLATION
while importing the export. Has anyone encountered this issue? or Can anyone provide pointers as to why this might be occuring?
Any help would be greatly appreciated!
Dipal

Hello Dipal,
The erros seems to be because of some UNIQUE key constraint issue while importing the export. This may be due to some conflicting import data which is causing this voilation. If it is a possibility, please purge the entire repository and have a clean import or else please analyse the UI log to find some more details.
Rgds,Ramesh

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

R3load -testconnection failed in import abap for EHP7-HANA

Hi,
Iam facing an error of r3load -testconnection failed in import abap step.The r3load is not able to communicate with my DB.
Please find below the error message and log.We are using HANA db path 68 & its an distributed installation(Separate HANA box, Sepa APP box) SAP ERP6.0 EHP7
R3loadexe.log
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20131105155710
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#2 $ SAP
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load: version R7.40/V1.7 [UNICODE]
Compiled Apr 10 2013 20:29:51
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load -testconnect
DbSl Trace: Connect to database failed, rc=1, rcSQL=-10709
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect to database failed, rc=1, rcSQL=-10709
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/Q10/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20131105155716
-Vinodh

Hi,
Check this link for you issue..
http://www.saptechies.org/hana-r3load-import-db-error-ddl-statement-failed/
1931083 - system status of ECC 6.0 EHP7 system
HANA R3load import: (DB) ERROR: DDL statement failed. Note : 1900445 Symptom
SAP EHP 7 for SAP ERP 6.0 - Release Information Note : 1865866
BR,
Prabhakar

OM vision India Hyderabad---exception while doing the ship confirm

order management vision India Hyderabad ----we are getting the exception while doing the ship confirm the exceptions are shown below:
Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND
Order: 20041 customer: C2il_customer Item: XXBikeEngine Error: NO DATA FOUND Transactions window: Pick and ship
Errors
Warning: Item on delivery detail 3962489 does not have pre-specified weight and volume.
Warning: Delivery 3773383 has null Weight
Error: Bill of Lading Number could not be generated because the ship method code was not selected for the trip 3129358.
Warning: Bill of Lading information could not be automatically created for delivery 3773383.
Submitted 4 out of 4 documents for this document set. (REQ_IDS=5807692, 5807693, 5807694, 5807695)
Warning: Failed to submit document set for delivery 3773383
Warning: 1 deliveries will be marked as Confirmed.
Warning: Some deliveries selected for Ship Confirm have errors or warnings.
i am grateful if any one can provide suggestion on the issue.....

Can you please share the documents and suggestions for R12Have you reviewed all the docs referenced above?
actually all are working fine in normal vision operations,and we are facing the exceptions while we are doing in OM vision India Hyderabad.
is there any setups do we configured for the OM vision India Hyderabad.if you can share any information on that it will be helpful...If the docs referenced above and Oracle Documentation http://download.oracle.com/docs/cd/B53825_08/current/html/docset.html do not help, then I would suggest you log a SR.
Thanks,
Hussein

Erorr while doing the portal postinstallation

Hi
While doing the post installtion activities for portal server
i logged with user administrator
http://hostname:portno/nwa
i have got this error.
Validation Error: Communication with the CMS failed. Ensure that the URL is correct, that the CMS is up an running, and that the given user has administrative access rights for the CMS[ HTTP response "Not Found" from CMS server.
Rao.

Hi
THanks for reply
Just now I started the installtion wat u told to install inthat way i have selected ASJAVA,EP,EPcore only.
Actully my need is i have to give this ep server to development team for ESS/MSS only.
Do i need to install NWDI in developer sytem.
I have some doubt on this .
and can u tell me how to proceed to do configuration for SLD.
I have selected SLD as solution manager while installation of solution manger.
IN ep I selecetd the existing sld as solution manager hostname.
Can u tell me how to configure SLD.
As u told n o need to do any post installation in EP7.0.
Regards
Rao.

Error While doing the Asset Credit Memo -ABGL

HI,
While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 406000000004-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Thanks
Supriya

Check your config in OABN / OADB
The depriciation area 01 can allow you post values only postive .. in OADB
it has maintained Acquisition values Postive or zero values and net book
values has miantained Postive or 0 values. so based on this setting u cannt
post any negative values for this asset.

Error while doing the Usage Decision in transaction QA32

Hello Friends,
While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
And against that inspection lot,status CRTD, PREQ, CHCR are active.
Because of which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
When i checked again i found that status CRTD is throwing the error message.
Hence friend, i want to do the Usage decision for that inspection lot than how to do?
Now user has assigned the material, plant to the inspection plan in QP02.
Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
Waiting for your valuable inputs.

For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
for QM setting Refer
http://sap-questions.blogspot.com/

Error message while doing the Vendor Clearing

Dear Team,
I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
No additional posting to asset
Message no. AA 444
Diagnosis
A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
Procedure
Combine the two downpayments into one.
Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
Thanks for the consideration.
Regards,
Suma.

Hi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani

Compensation Planning - Error while doing the planning for Employee

Hi Friends,
We have implemented standard MSS Business package.
Line Mangers are using the Compensation Planning Iview and are facing errors while sending it for further approvals.
In the steps.
In the last step they get RFC_ERROR_SYSTEM_FAILURE.
A critical error has occurred. Processing of the service was terminated.
Access via NULL Object reference not possible.,error key : RFC_ERROR_SYSTEM_FAILURE.
Also to note that while doing the planning we get " No budget Data available"
Is budget data mandatory to complete planning. However in test systems we were able to run the complete cycle even without the budget data we were able to complete one cycle.
Kindly advise .
Thanks
Santosh

Hello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

R3load -testconnect fails while doing the Export Prepare

Similar Messages

Maybe you are looking for