R830 Camera not working after Windows 10 upgrade

I have recently upgraded to Windows 10 in my Toshiba R830 model laptop. after upgrading my Toshiba Web camera - HD is not working and i am unable to update with new driver. Please advise a solutions. Thanks and Regards Rakesh

Can you check the part number that begins with a 'P' from the label on the bottom?

Similar Messages

FaceTime Camera Not Working After Yosemite Upgrade

So After I upgraded to Yosemite yesterday, my FaceTime Camera stopped working.
Every time I turned on FaceTime or Photo Booth, the green light on the camera started to blink like crazy but nothing would show up on the screen. It was just black. And I tried different user too, not working.
I tried to reinstall Yosemite, no luck.
Tried to rest SMC and PRAM, no luck.
Tried safe boot, no camera in safe mode.
Tried repair disk permission, no luck.
Here is how it showed in system report, I thought it would be more details?
I am using MBP with Retina late 2013 model. I am 90% positive that the camera was working before this upgrade.
I don't know whether anyone else encounter the same problem and I am afraid it's something I installed that's causing the problem. In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back.
Thanks!
<Image Edited By Host>

geoffreysong wrote: ... I am afraid it's something I installed that's causing the problem...
You have done the right things. With all you have tried, some third party item you have added is a very good guess as to what could be causing your trouble. The biggest difficulty will be determining which installation caused the trouble.
I am certainly not experiencing your problem on any of my 10.10 Macs.
geoffreysong wrote: ... In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back...
Right again! The way to prevent reinstalling the problem (and to prove your guess was correct) is to reinstall OS X using the OS X Yosemite: Erase and reinstall OS X instructions.
Next, before adding anything else, test your camera using the applicable suggestions from Apple's How to Troubleshoot iSight article. (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
• If the camera works now, your suspicion is correct. You can then add ONE needed app FROM ITS ORIGINAL SOURCE (not from any of your backups) and test the camera again. If the camera fails, you have found the problem app. If the camera works, continue adding apps one at a time, testing thoroughly between each addition. After all your apps are added back, if your camera continues to work correctly, you can copy your data files back from your latest backup.
• If the camera doesn't work immediately when nothing has been added to your fresh Mac OS X installation, you most likely have a hardware problem. There are no user serviceable parts of the camera. Contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.10.1

ITunes Not Working After Windows Upgrade from Vista to 7

I recently upgraded a laptop from Vista to 7. iTunes 7.x was installed before the upgrade. As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x). After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open. I renamed the artwork folder to old and then I was able to get into iTunes. The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes. I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck. Anyone have any suggestions?

I've been working on this issue for 2 days with no luck. Still looking for a solution if anyone has one. Thanks!

Built in Factetime HD Camera not working after SSD upgrade

Hey guys,
So I went ahead and removed my optical drive and replaced it with a 2nd drive caddy bay and an SSD. I've rechecked all my wiring and everything twice and disconnected everything and reconnected it to make sure it's all correct, and it is.
Here's my issue
My Facetime HD camera is saying "camera is not connected" in all applications. Skype, Facetime, Photobooth, iMovie, and even under USB in "System Information" it's not showing up. My computer is completely up to date (All software updates have been performed), and I've reset my SMC, and NVRAM multiple times with no result.
A breakdown of what I've done these past few days:
I added a 2nd drive caddy and installed the SSD there, and made that my system disk drive (OSX is running from that drive). I formatted the old drive and it's still in its original location.
Any idea of what is wrong or how to fix the problem?

You may have already tried a few:
http://support.apple.com/kb/HT2090 How to Troubleshoot iSight
my isight camera is not working-not recognised with photo booth or ichat
===================
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

Photoshop not working after windows upgrade

Could someone help me with the above issue...All the other Adobe products work fine...except photoshop

Those upgrades to Windows 2000 are tough.
Okay, in all seriousness, could you please provide some details?
What version, how did you upgrade, what failure or error are you seeing?
Details matter. Screen grabs could be very helpful.
-Noel

Iphone 6 plus facetime camera not working after 8.1 upgrade

iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

It seems the facetime camera does not work for whatsapp only it works normally.

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Web camera not working after sowtware update

HI, there
My macbook's (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

Hi purduejatt, I apologize for the delayed response as I understand how important it is to have a working camera! I would suggest clearing the data in the Camera application. Press Menu>Settings>Application Manager>All>Camera>Clear data. Please keep me updated on the status as I would be more than happy to provide additional support.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

R830 Camera not working after Windows 10 upgrade

Similar Messages

Maybe you are looking for