RAC installation hang while running root.sh

Hi, I'm installing 10gR2 on AIX 5.3 ML05 with HACMP 5.3, CRS & RAC S/W will be installed on local disk, and all other database files, voting disk & OCR are on RAW device on SAN storage. When I was installing CRS and running runinstaller, it prompts me to run root.sh on each node, then I run it on the first node with user "root" but the script hang after showing lines:
Now formatting voting device: /dev/reaivd01
Now formatting voting device: /dev/reaivd02
Now formatting voting device: /dev/reaivd03
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
I've tried to grep any CRS daemon started but cannot find any. Then I tried to start CRS manually but failed to start. Please help and thanks in advance!

I found the following error in /tmp/crsctl.xxxxx:
Failure in CSS initialization opening OCR.
It is running the command "crsctl check boot". Anyone help? thanks!

Similar Messages

Cluster Installation Error while running root.sh

Hi all,
Please help
I tried to install clusterware but when i run root.sh on first node it shows as below
[root@rac11g1 etc]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
[root@rac11g1 etc]# /u01/crs/oracle/product/11.1.0/crs/root.sh
WARNING: directory '/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/u01/crs/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/u01/crs/oracle/product' is not owned by root. Changing owner to root
The directory '/u01/crs/oracle' is not owned by root. Changing owner to root
The directory '/u01/crs' is not owned by root. Changing owner to root
The directory '/u01' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac11g1 rac11g1-priv rac11g1
node 2: rac11g2 rac11g2-priv rac11g2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/sdd1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
rac11g1
Cluster Synchronization Services is inactive on these nodes.
rac11g2
Local node checking complete. Run root.sh on remaining nodes to start CRS daemon
On the Second Node
[root@rac11g2 crs]# ./root.sh
WARNING: directory '/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/u01/crs/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/u01/crs/oracle/product' is not owned by root. Changing owner to root
The directory '/u01/crs/oracle' is not owned by root. Changing owner to root
The directory '/u01/crs' is not owned by root. Changing owner to root
The directory '/u01' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac11g1 rac11g1-priv rac11g1
node 2: rac11g2 rac11g2-priv rac11g2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/sdd1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
rac11g2
Cluster Synchronization Services is inactive on these nodes.
rac11g1
Local node checking complete. Run root.sh on remaining nodes to start CRS daemon
When i run root.sh on first node it shows that the second node is not active which is accceptable
but when i run on second node it shows that fisrt node is not active
please help i'm stuck here from past 2 days
Bala
Edited by: Bala0575 on Jun 16, 2010 3:48 AM

Did you run cluvfy.sh before performing the instalation, if so did it report any errors. I would suggest running it now in "pre crsinst" mode and report any findings back. If CVU says everything is good then I would recommend talking to Oracle Support.
It looks like CSS is running on node1 at the end of its root.sh, yet its dead when root.sh is run on node 2.... makes me wonder if its root.2h on node2 thats killing it.
Run "cluvfy stage -pre crsinst" and post the output back to the forum please?
Yours,
Bob

Problem while running root.sh in RAC Node

I am currently configuring RAC on linux using VMWARE Server using the following link .My host Operating System is Windows XP and guest O/S Cent OS.Shared disks have been configured on my C drive for ocr,voting disk,asm.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
I have performed all the steps succesfully but during the installation of Clusterware Software from node RAC1 it asks for the execution of root.sh from both the nodes.
Currently I am running root.sh from first node but it gets hanged at "Startup will be queued to init within 90 seconds" and doesn't move from there on..Also according to the link I am following I should be experiencing below output while running root.sh from Node RAC2 instead of RAC1 which I am experiencing....Please suggest on this ...
# cd /u01/crs/oracle/product/10.2.0/crs
# ./root.sh
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
---------------------------

Will someone update on this?

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

Xcode Installation Hangs on "Running Installer Scripts"

Hi, I'm trying to install Xcode to take advantage of their gcc and make files. However, no matter what I do, Xcode installation hangs on "Running Installer Scripts". Searching on Google did not give me any help. I can't quit the process either. Here's a screen shot:
http://lh4.ggpht.com/_id4E4GFQud0/SfvsNwDdDaI/AAAAAAAACnI/23tE3vWw3vk/Snapshot%2 02009-05-02%2001-44-41.png
Could you please advice on what can possibly go wrong?
I'm running OS 10.5.6, and installing Xcode directly from the Mac OS X Disc 1 CD. In the CD document, it says Xcode Developer Tools 3.0 for Mac OS 10.5.
Thanks!

Thanks for the details of what you've tried. Every detail you can remember increases the chance that someone can spot the problem.
My read is that you've documented beyond much doubt that a clean install is what you need. Restoring your system was a good try, but I don't think that would change much outside of the /system folder. Even if we think it did, the evidence you provided tells me that some files from the first Xcode installation remain. I would be looking for files created on that date and checking perms in places like the root directory, /tmp, /usr/share/sandbox, etc. I would also advise renaming /Developer as written in the +Book of the Dead+. I didn't invent that instruction; it was distilled from dozens of case histories in this forum.
You might also try one of the 3rd party tools that's out there for cleaning Macs. I've never tried any of them though, so can't make a recommendation.
Oh... erm... You did restart your Mac at some point since the problems started, right?
Re installing only gcc, have you been to the Developer Tools page at the connect.apple.com site? Select Downloads on the home page, and in the next page select Developer Tools from the lower right panel. I found 2 downloads that appear to be full gcc installers: Xcode Legacy Tools and GCC 4.2 Developer Preview 1. The other gcc downloads seem to be updates. I might try gcc 3.1 in the legacy tools. It's probably all you need, and if not you'd be good to go for an update.
Of course, you could always download directly from the gnu site, just you might need to be a rocket scientist to install one of those packages. I'm guessing it would be a learning experience. There's also something to be said for using a 3rd party installer, since it probably wouldn't be affected by whatever is stopping the Apple installer(s).
Sure hope some small part of the above turns out to be useful. But in any case, please let us know how you resolve the problem.

Oracle Portal 11g installation hangs while creating domain

I have patched the oracle portal 11.1.1.2 to 11.1.1.6 in Window 7 and tried to configure the oracle portal but the installation hangs while creating domain.
Just realised Window 7 does not support Oracle Portal 11g.
Edited by: user12063924 on Jul 5, 2012 11:58 PM

Dear Oracle Oracle BI Software,
This software is a big puzle for end users and it is really wasting our time in try and error scenarios. admit it with us and don't hide behid curtains. Well did u follow the Guides in the Book ? Yes Yes i followed and it is still showing errors .. in the name of God inform the Development Department to manage the setup .. i configured everything fine and what is really funny that after it loads 100 % it discovers that it can't create domain. sorry i m not a master Guy, but before the installtion it should validate for us if everything is ok and can be lauched not to do 1 hour workshop and cover out at the end of the movie that there is an error.
Guy put this product in the shelf until next release
Thank You

11gR2 RAC installation in AIX fails while running root.sh on node2

Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
Regards

HI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian

Error while running root.sh in 11GR2 2 node cluster

Hi Friends,
I am trying to setup 11gR2 2 node RAC on RHEL 4.7. The cluvfy script shows everything as passed and grid infrastructure installation completes fine until I ran root.sh script. The root.sh script when run on node 1 exits with following error in console
DOCRAC1-N310 []:./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:>ORACLE_OWNER= oracle
>ORACLE_HOME= /app/oracle/grid
>
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying coraenv to /usr/local/bin ...
>
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-06 13:20:18: Parsing the host name
2011-01-06 13:20:18: Checking for super user privileges
2011-01-06 13:20:18: User has super user privileges
Using configuration parameter file: /app/oracle/grid/crs/install/crsconfig_params
PROTL-16: Internal Error
Command return code of 41 (10496) from command: /app/oracle/grid/bin/ocrconfig -local -upgrade oracle oinstall
Failed to create or upgrade OLRWhen I checked the logs in $GRID_HOME/log/<Node1>/client
I can see errors in ocrconfig_12426.log as
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2011-01-06 13:20:19.133: [ OCRCONF][2564297536]ocrconfig starts...
2011-01-06 13:20:19.134: [ default][2564297536]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ OCRCONF][2564297536]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Error [4] retrieving configuration type
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Exiting [status=failed]...and in crsctl.log
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:01.372: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown status
2011-01-06 13:19:11.502: [ default][2566642592]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ default][2566642592]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:11.503: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown statusI have tried to deinstall, reconfigure , but still no luck. I will be trying to use Oracle Deinstall utlity now. Before that I would like to get comments from experts
Thanks ,
SSN.

Consider moving this question to the Real Application Clusters forum.
Confirm that +/app/oracle/grid/crs/install/crsconfig_params+ exists before running root.sh - if it does, please post contents using tags to encapsulate the config text data.
Are you using ASM for managing voting and OCR disk storage, or are you manually setting these to specific block devices?

Error while running root.sh

Hi, I am trying to install Oracle 9i (9.2.0.1.0) in my Red Hat Advanced Server 2.1 and everything went fine from installing to linking it. But when it´s asked me to run root.sh as root it gives me an error while trying to install LSSV. It´s an dependency error with libncurses.so.4. orclclnt-nw_lssv.Build.71-1 needs this file I mentioned.
Is the installation of my OS with problems? I am not sure if this (libncurses.so.4) should be installed with the OS or if Oracle installs it! After that, I decided to ignore this error and tried to continue with the installation but dbca gives me an error. I don´t think it´s related with LSSV but I would like to make sure is that´s nothing wrong with the installation!
Can anyone help solve this problem? Thanks!

Hi,
Rename the file and continue the installation again.
Regards,
Umair

OIM installation error while running rcu

while repository crete in progess following error is coming
user or role DEV_MDS doe not exist
FILE:E:rcuhome\integration\\mds\mds_user.sql
statement:GRANT connect TO &&1
Kindly suggest.
after ignoring that one am getting similar type of errors.
like useror role 'DEV_SOAINFRA' does not exist .
FYI: i installed rcu 11.1.1.2 first then while domain configuration, jdbc connection getting failed,so i dropped all the schemas using drop utility of rcu. while running rcu 11.1.1.5 am getting that error
Kindly suggest.

Please first drop all "DEV_" related schema properly thoroughly* before starting it again...
And also don't ignore such errors: user or role DEV_MDS doe not exist...
RCU is a very smooth sort of tool... It is so simple that these issues should not have come...
So, please take another look at System Specifications, installers version compatibility and consistency...
Hope, once you drop all DEV_ related schema (also their table spaces etc) and restart the process again, this time it should happen in one shot...
Also, execute following 3 System properties setting for database using sys as sysdba:
alter system set session_cached_cursors=100 scope=spfile;
alter system set processes=500 scope=spfile;
alter system set open_cursors=500 scope=spfile;
Then shutdown the database i.e. shutdown immediate
After that you are beginning afresh:-
*(1) System properties: Set..*
*(2) All DEV_ schema: properly deleted.*
*(3) Version compatibility: Verified...*
*(4) Installation document... Once again studied deeply...*
http://docs.oracle.com/cd/E21764_01/install.1111/e12002/toc.htm
Done...
Hope we would hear good news that RCU was executed in one shot...

11gR2 : Failed to start EVM while running root.sh in Node1

DB verision:11GR2
Platform : Solaris 5.10 (Amd64)
I've reached the last step in the installation in Node1
# ./root.sh
.............all messages say succeeded till here............
CRS-2676: Start of 'ora.crsd' on 'hudson1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'hudson1'
Start action for daemon aborted
CRS-2674: Start of 'ora.evmd' on 'hudson1' failed
CRS-2679: Attempting to clean 'ora.evmd' on 'hudson1'
CRS-2681: Clean of 'ora.evmd' on 'hudson1' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/grid/bin/crsctl start resource ora.evmd -init
Start of resource "ora.evmd -init" failed
Failed to start EVM
Failed to start Oracle Clusterware stackA search in OTN and MOS returned nothing. Any idea how i could diagnose this issue?

Hi,
Check this note on MOS.
*Troubleshooting 11.2 Grid Infastructure Installation Root.sh Issues [ID 1053970.1]*
A Troubleshooting Guide is provided to assist in debugging a specific issue. When possible, diagnostic tools are included in the document to assist in troubleshooting.
Regards,
Levi Pereira

SAP installation hangs while installation EHP4 ready on Solaris-Oracle

Hi,
I am in a process of installing EHP4 READY on Solaris , with ORacle database.
at 13 Phase CREATE DATABASE, the installation hangs up
when i check the log ora_sql_results.log it says
SP2-0310: unable to open file "ora_scr_tmp.sql"
not getting any clue i have added group sapinst to user orasid, and also gave full permission to the file
"ora_scr_tmp.sql "
still no luck,
please advise.
Regards,
Irfan..

Hello Irfan,
SP2-0310: unable to open file "ora_scr_tmp.sql"
There are 3 possibilities...
1. Users and there Group membership is incorrect.
2. ORACLE_HOME directory permissions are not set or incorrect.
3. Profile parameters are not set..
Check this as below:
1. Check the Users and Group membership as below:
Users -----------> Primary Groups
<SID>adm ------> sapsys,oper,dba,sapinst
ora<SID> -------> dba,oper,sapinst
2. Check that ORACLE_HOME has 755 permissions and ora<sid>:dba should be the user and owner. You can set it with below command:
# chmod 755 -R /oracle
# chown ora<SID>:dba -R /oracle
3. Check if you defined ORACLE_HOME and ORACLE_SID environment variable for user ora<SID>.
Regards.
Rajesh Narkhede

Oracle CRS stack is already configured while running root.sh

Hi,
I am trying to install cluster ware in for 10g (10.2.0.1)RAC in RHEL5 node 1 and node 2 servers. Already i tried install clusterware but my installation failed in last step. So i uninstalled and tried my installation again from node 1. But when i execute the ./root.sh as root user in node 1 or node 2 i get the below error
WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Oracle CRS stack is already configured and will be running under init(1M)
How to remove or deconfig this CRS and CSS service properly and proceed the installation.????
Regards,
007

cd <GRID_HOME>/crs/install
run as root:
# rootcrs.pl -deconfig -force
then run under oracle user:
<GRID_HOME>/deinstall/deinstall
This should do.
If you still see this warnings, check if you have any oracle-owned files under /etc, for example /etc/oracle dir with local ocr/olr location files.
Consider renaming/removing them and try again.

Application hangs while running a report from Forms

Hi all,
I am getting a problem regarding running reports from Oracle forms application for printing in a shared printer at client system. There is no problem when I set the DESTYPE to HTMLCSS or FILE. But when I set it to PRINTER then the application hangs and report server gets busy. Once this problem occurs other reports from other client systems are not generating even if this is a HTMLCSS or FILE type.
The thing is the application has ran successfully for two months. Suddenly from last few days the problem is arising.
Few things that I have noticed:
1) When the application hangs I cheked the Task manager, where the process rwlpr.exe is running. If I manually ends the process there the application comes back with a message 'unable to run report'.
2) I have checked few log files, where I have found few log files whose names end with a job number. The file generates from a succesfully running report shows few steps tht end s with closing the printer. But the file that is generated from an unsuccessfull job stops at the step 'Opening Printer //<machine name>/<printer share name>'.
3) Then finally I have changed the DESTYPE to file and using the HOST command printing the text file to shared printer in dos mode. Its working fine. But often the first problem arises again.
What are the possible resons that may cause this problem.
Looking for your positive response.
Thanks and regards
Sandy

From dos prompt I have used the type commad.
From server machine in dos prompt I have used,
type d:\rep.txt > \\<client machine name>\<printer shared name that is connected to client printer>
from Server machine I have opened a Notepad doc, File >Print >Selected the printer that is in client machine.
This works fine.
Now my code to print a report directly to printer,
V_PRINTERNAME := '\\mmondal\mmondalprn'; -- shared Printer name at Client machine
repid := find_report_object('REP_BANK_MST');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,V_PRINTERNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'kt30');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no P_ISPOSTED='||:CHK_ISPOSTED);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=kt30','_blank');
ELSE
message('Error when running report');
END IF;
exception when others then
     message(to_char(sqlcode));
This hngs the application. And other requests enqued in job queue does not process. If I cancel the stucked job then other reports complete sucessfully.
Log - rwserver.trc shows the following:
[2011/6/14 4:48:28:437] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCacheItem:addFile): add file 'mmondalprn65558177.txt' for job 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32948731
[2011/6/14 4:48:30:671] Exception 50157 (): Error while sending file to printer \\mmondal\mmondalprn. Exit with error code 1848
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:756)
     at oracle.reports.utility.SOSD.sendPrinter(SOSD.java:128)
     at oracle.reports.server.DesPrint.sendFile(DesPrint.java:102)
     at oracle.reports.server.Destination.send(Destination.java:484)
     at oracle.reports.server.JobObject.distribute(JobObject.java:1582)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2231)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
     at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] State 56016 (JobManager:updateJobStatus): Job 1051 status is: Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1051 notify its duplicated jobs.
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:30:671] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/6/14 4:48:30:671] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:runJobInEngine): Encounted exception in job 1051
[2011/6/14 4:48:30:671] Debug 50103 (ConnectionImpl:runJob): jobid = 1051 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 196 is released
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 197 is released
[2011/6/14 4:48:31:31] Debug 50103 (JobManager:removeJob): will remove job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:deleteItem): delete item for job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCacheItem:clear): job 51 become invalid
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32942484
[2011/6/14 4:48:31:46] Debug 50103 (JobManager:removeJob): removed job 51
[2011/6/14 4:48:47:906] Info 56013 (ConnectionManager:release): Connection 198 is released
[2011/6/14 4:48:51:890] Info 56013 (ConnectionManager:release): Connection 199 is released
[2011/6/14 4:50:48:437] Info 56013 (ConnectionManager:release): Connection 200 is released
Most of the time when all the instances are restarted then for the first time it runs successfully.
The above code worked fine for Last two months.

Error installing 10gR2 on Centos4.2 while running ROOT.SH

I`m installing with ASM
During process i get this message:
i don`t know what i need to do.
Running Oracle10 root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /home/oracle/oracle/product/10.2.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
/home/oracle/oracle/product/10.2.0/db_1/bin/localconfig: line 728: 3673 Segmentation fault $CRSCTL create scr $CSS_ORACLE_OWNER
/home/oracle/oracle/product/10.2.0/db_1/bin/localconfig: line 728: 3679 Segmentation fault $CLSCFG -local -o $CH -l "$CSS_LANGUAGE_ID"
Configuration for local CSS has been initialized
Failed configure CSS. Fix the problem and rerun this script from destination Oracle home with 'reset' argument

Hi.
I've only experienced segmentation faults during an installation when my kernel parameters are set incorrectly.
I suggest you reset the parameters and try again. This might help:
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRedHatAS4.php#SetKernelParameters
Cheers
Tim...

RAC installation hang while running root.sh

Similar Messages

Maybe you are looking for