RAC installation with 12c database on IBM AIX server 7.1(64bit)

Dear Team,
We have to configure the RAC with oracle 12C database on IBM AIX server 7.1(64bit).
We are new to the RAC setup with 12c installation. So kindly provide the metalink id for proceeding the above installations.
Thanks
Kumar

Hi,
Refer this document also,
RAC and Oracle Clusterware Best Practices and Starter Kit (AIX) (Doc ID 811293.1)
Regards,
krish.

Similar Messages

  • Oracle 11gR2 RAC installation with DNS

    Dear Guru's,
    I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
    O.S: RHEL5.4(64 bit)
    Oracle Version: 11gR2(11.2.0.2)
    Note: Am creating nodes in VMware ESXi server.
    Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
    Bala :)

    Hi Bala,
    I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
    There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
    And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
    - http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
    - http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
    - http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
    Very good videos:
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
    - http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
    Hope it helps,
    Best regards,
    Gena

  • Setting up Secure connection with DB2 database on IBM iSeries

    We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

    We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

  • While creating RAC database on IBM AIX 5.3 following errors occur.

    Hi,
    I am creating a Oracle database on following configuration IBM AIX 5.3 box:
    OS: IBM AIX 5.3
    DB: Fresh installed Oracle 9.2.0.1 upgraded to Oracle 9.2.0.7 (Patch)
    While creating a RAC database on the above server i got following errors:
    ORA:00603 : ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
    ORA-27504 : IPC error 380 OSD context
    ORA-27300 : OS system dependent operation : if_not_found failed with status:0
    ORA-27301 : OS failure mesage: error 0
    ORA-27302 : failure occured at:skgxpbaddr9
    Licence high water mark = 0
    Can any 1 help me out.Are the above error related to OS or something is wrong with the OS cluster / RAC. I tried creating single instance database on either of the server which are in cluster, no success.
    Also 1 more thing i would like to add is that iam able to create single instance database on server which are not in cluster.
    Any help regarding the above error is appreciated.

    This is a bug (for patchsets 9.2.0.6 and higher), see metalink:
    UNABLE TO START RAC INSTANCE AFTER APPLYING PATCHSET 9.2.0.6 ON AIX
    Note:300218.1
    Werner

  • Problems with RAC installation with Windows 2000 Advanced Server

    Hello,
    I've two servers in cluster mode with W2K Advanced Server, and a RAID-5 array of 4 disks shared by both of them. My problem is that I've installed The Cluster Service of Windows in order to have an active/passive configuration of my servers, because I have a common directory structure that is accessed by the PC's of the LAN.
    By another hand, I want to install Oracle Real Application Cluster to manage my Oracle database but after create the extended partition and the logical drives when I execute the file \preinstallation_rac\clustersetup\clustersetup.exe to create the cluster, when I select the option Create a cluster the following error message appears me:
    "Any disk Oracle partition has been found. Stop this wizard, create an Oracle partition and try it
    again."
    I'd like to know if it's possible to have the Service Cluster of Windows 2k and the Oracle clusterware?¿ Altough before begining the installation I've stopped my Cluster Service as documentation suggests. If somebody knows what it's happening to me I'd be really very grateful.
    Thanks in advance,
    Isabel

    Hello Joel,
    I've already read all documentation provided by Oracle about Real Application Clusters
    and I've not found anything to solve my problem. Certainly I want to use OCFS but when I
    try to execute preinstall_rac\clustersetup.exe to install CFS the error appear and I can't
    continue with RAC installation.
    Besides I've tried command "lsnodes -v" and got :
    Could not load CM.dll
    Could not initialize cluster
    And when I've tried to run "clustercheck" I've got :
    ** Copy File: Create Directory failed - Error 183
    ** Directory = \\192.168.1.111\Cy$\Temp\opsm
    Created directory \\192.168.1.112\Cy$\Temp\opsm
    Could not copy file to other nodes [error = 183]
    I've read metalink Note 186130.1 Clustercheck Fails with Windows Error 183 and the only
    proof I haven't done is get the clustercheck.exe release1(9.0.1).
    Any suggestion will be very appreciated.Thanks,
    Isabel

  • Golden Gate configuration with 12c Database

    Hi,
    I have a requirement to configure the golden gate with oracle database 12c with container database.
    Versions:
    Golden Gate - 12.1.2.1.0
    Oracle Database - 12.1.0.2
    Here we need to configure with container database and two pluggable database.
    Kindly suggest me the steps for configuration.
    Regards
    Kumar

    Hello Kumar,
    I  think you need to do the same setup as other GG versións :
    1. Install Golden Gate software on extract/replicat sites
    2. Create GG User with the necesary  privs.
    3. Set Min Logging level  at database level.
    4. Set TRANDATA for the tables that you like capture changes
    After, you need analyze the objects that you need replicate and define the capture process.
    To use GG on a MultiTenant Database, you need  define at extract level the PDBs and the objects that you need extract. Remeber that in a Multi-tenant enviorment, only a set of redo logs exists,then the capture process is Multi-Tenant aware, because allow
    set the PDB and the schema and the objects that you like capture. It is called qualified three-part name, PDB.SCHEMA.TABLE
    Example:
    SOURCECATALOG FINANCE TABLE SAP.*;  ---> Source is the way to inlcude the PDB
    TABLE REPORTS.*;
    SOURCECATALOG HR TABLE SIEBEL.*;
    TABLE REPORTS.*;
    SOURCECATALOG MFG
    TABLE CUSTOMER.ORDERS;
    TABLE REPORTS.*;
    TABLE HQ.LOCATIONS.*;
    In this example, Extract captures the following:
    All tables in the SAP and REPORTS schemas in the FINANCE PDB.
    All tables in the SIEBEL and REPORTS schemas in the HR PDB.
    All tables in the CUSTOMER and REPORTS schemas in the MFG PDB.
    For the last TABLE statement, Extract captures all tables in the LOCATIONS schema in the HQ PDB. This statement is a fully qualified three-part name and overrides the previous SOURCECATALOG specification.
    You have more info at : http://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters147.htm
    Also, you have a dedicated chapter of using GG in a Multi-Tenant env at:  https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/config_containerdb.htm#BDCFDFDE
    I hope help.
    Regards
    Arturo

  • What's the deal with product availability on IBM/AIX?

    Can some rep from Oracle explain why IBM/AIX is always last in line for new versions of Oracle software (database/app server) to become available?
    We're now in a situation where iAS9.0.4.0.0 is at stage projected on IBM/AIX for quite a while now and we need it badly. What's the holdup?

    <bump/>

  • FMW 11G with 12c database

    Our DBA's are looking into upgrading our database to 12c (probably 12.1.3).The Oracle Fusion Middleware 11g Release 1 (11.1.1.x) Certification Matrix says "Oracle DB 12.1.0.1+ certification is available only with WLS 10.3.6+/FMW 11.1.1.7+". Does that mean we can use Oracle database 12.1.3 with WLS 10.3.6/FMW 11.1.1.7 and greater.
    Any pointers will be of great help.
    Thanks,
    RT

    Yes, you can use the RDBMS 12.1.3 with the WLS 10.3.6. Please refer to very helpful MMOS Note: WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database (Doc ID 1564509.1)
    HTH
    Borys

  • SAP BO Installation with Oracle Database

    Hello all,
    My client uses SAP R/3 with Oracle database. Now we have to install Business Objects on another machine.
    I've read the documentation on Installing Procedures but there are some questions still not clarified.
    1. Do I have to install Oracle in the new machine?
    2. If not, can I connect BOBJ to the database of the SAP R/3 Server?
    3. If I want to have three systems (Like in R/3, Productive, Tests and Development) do I have to install BOBJ in different machines?
    Thanks in advance,
    Regards

    1. you dont have to insall Oracle database at the BO machine side, you just need any database to hold the BO repository.
    2. you cant connect directly using BO, only Crystal reports can connect directly to R3 database, you need to have a BW in between.
    extract your data into the BW, and let BO connect to BW using the BO integration kit for SAP solutions.
    3. no you dont have to have 3 different machines, using one BO machine you connect to them all, but you may need build a  BO environment, (Development, Production servers)
    good luck

  • Issues after installing apps r12.1.1 on IBM AIX server 6.x

    hi ,
    I have done the single node Apps r12.1.1 installation on IBM AIX 6.x server. I am requesting someone to please help me with the following issues.
    1. The installation has happened on a single node..single dir structure /U02/….. At present, I am able to open all HTML pages, but not any form. While opening forms, its giving following error.
    FRM 92101: There was a failure in the forms server during startup. This could happen due to invalid configuration.
    Please look into the web server log files for details.
    2. At present commands and TOPs don’t work (e.g. sqlplus, or $APPL_TOP etc). How they can be setup so that the commands can be run anywhere and cd $XXX_TOP commands can be issued to move to respective TOPs.
    3. I ran the adautocfg.sh after implementation. While running, I saw that it configured the XXX_TOPs. But, unable to use them. What else is required to be run? Did I miss out on any other files?
    Thanks in advance.
    Regards,
    Vamshi

    Hi,
    1. The installation has happened on a single node..single dir structure /U02/….. At present, I am able to open all HTML pages, but not any form. While opening forms, its giving following error.
    FRM 92101: There was a failure in the forms server during startup. This could happen due to invalid configuration.
    Please look into the web server log files for details.This is a generic error, so please check the application.log file for details about the error.
    2. At present commands and TOPs don’t work (e.g. sqlplus, or $APPL_TOP etc). How they can be setup so that the commands can be run anywhere and cd $XXX_TOP commands can be issued to move to respective TOPs.You need to source the application/database env file, $APPL_TOP/APPS<CONTEXT_NAME>.env and $ORACLE_HOME/<CONTEXT_NAME>.env
    Please see "Oracle Applications Maintenance Utilities" for details -- Page 1-11/1-12
    Oracle Applications Maintenance Utilities
    http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admu.pdf
    3. I ran the adautocfg.sh after implementation. While running, I saw that it configured the XXX_TOPs. But, unable to use them. What else is required to be run? Did I miss out on any other files?You need to source the application env file again to set this custom top.
    Please see old threads which discuss the same topic.
    How to create a custom top in R12
    How to create a custom top in R12
    CUSTOM_TOP
    http://forums.oracle.com/forums/search.jspa?threadID=&q=CUSTOM_TOP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Two Oracle databases on one AIX Server - Note working, Pls Help

    Dear Friends,
    I have installed Two SAP systems with Two Oracle Databases on one AIX machine, The Installation of both the systems went fine without any errors, and also i have been able to login to both the systems seperately. (that means i cant start both the systems at a time, its one at a time)
    But the problem is of the Oracle Listener, i am not able to start both the systems with single Oracle Listener processes(tnslistener). I tried all the possible scenarios as mentioned in note 98252 but nothing seems to be of any use so far.
    the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
    Or
    you can say i am also ready to keep two different listeners for TWO seperate Oracle databases, I tried doing so as per one of the sap notes in which you have to keep different names of listener and different numbers for listener port for second ORACLE database. I tried doing exactly mentioned in the note but yet unsuccessful...
    Now i am completely lost as what is to be done since its critical i want you to immediately look into it and suggest me the appropriate solution so that i can set up both of my DEVELOPMENT and QUALITY system running...
    To troubleshoot this if you require anything from my side then please feel free to ask me since our functional consultants have to soon start working on the SAP systems.
    Regards
    Ayush

    The note you specified talk about 2 database instances not 2 databases... (I was starting to wonder how you deploy 2 databases), you can have multiple database instances on a DB. The note also give you detailed explanation of the configuration of listener.ora
    Now, if this is the case and you have installed 2 instances (not databases) on the same host and configured the listener according to the note, then you should be able to call R3trans -d from both SID's.. if the R3trans fails please post the contents of trans.log here.
    the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
    Then, the configuration of your listener.ora file must be incorrect.
    Regards
    Juan

  • FOD schema installation with tutorial Database Development with JDeveloper

    I followed the instruction online at http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html to install FOD schema. Errors displayed when call "run ant target -> buildall" were below:
    populateImages:
    [java] 2010-9-26 14:56:01 oracle.as.jmx.framework.LoggerHelper log
    [java] SEVERE: Error initializing the JMX FRamework SPI "oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl"
    [java] java.lang.reflect.InvocationTargetException
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    [java]      at java.lang.reflect.Method.invoke(Method.java:597)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializeSPI(PortableMBeanFactory.java:1895)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializePlatformSPI(PortableMBeanFactory.java:1851)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.init(PortableMBeanFactory.java:1831)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:207)
    [java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:215)
    [java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    [java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    [java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    [java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    [java]      at java.lang.Class.newInstance0(Class.java:355)
    [java]      at java.lang.Class.newInstance(Class.java:308)
    [java]      at oracle.mds.core.MDSInstance.lookupMBeanServer(MDSInstance.java:2061)
    [java]      at oracle.mds.core.MDSInstance.checkMDSDeployStatus(MDSInstance.java:950)
    [java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1692)
    [java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1666)
    [java]      at oracle.mds.core.MDSInstance.findAndStoreMDSInstance(MDSInstance.java:1962)
    [java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:507)
    [java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:470)
    [java]      at oracle.adf.share.config.ADFMDSConfig.getDefaultMDSInstance(ADFMDSConfig.java:436)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    But still got message - "BUILD SUCCESSFUL" at the end. Does anyone know how to solve this problem?
    My intention of performing FOD schema installation was to follow the tutorial "Database Development with JDeveloper" at http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/databasedevelopment/obe_%20databasedevmt.htm. But I stopped at the last topic "Creating and Debugging PL/SQL Objects in the Database" ->"Running a SQL Script to Create an Object Type" when trying to create a object using script on the page.
    This is the script:
    ------------------------------------------------start
    REM
    REM Create object ORDER_ITEMS_REC
    REM
    CREATE or REPLACE type ORDER_ITEMS_REC as object
    ORDER_ID NUMBER(15),
    LINE_ITEM_ID NUMBER(3),
    PRODUCT_ID NUMBER(15),
    QUANTITY NUMBER(6),
    UNIT_PRICE NUMBER(8,2),
    CREATED_BY VARCHAR2(60),
    CREATION_DATE DATE,
    LAST_UPDATED_BY VARCHAR2(60),
    LAST_UPDATE_DATE DATE,
    OBJECT_VERSION_ID NUMBER(15)
    show errors;
    --------------------------------------------------end
    and the error message I got was
    ------------------------------------------------start
    Error report:
    ORA-01031: insufficient privileges
    01031. 00000 - "insufficient privileges"
    ------------------------------------------------end
    I was wandering whether the error of FOD installation could cause the error of the tutorial?
    Any response will be appreciated.

    1. you dont have to insall Oracle database at the BO machine side, you just need any database to hold the BO repository.
    2. you cant connect directly using BO, only Crystal reports can connect directly to R3 database, you need to have a BW in between.
    extract your data into the BW, and let BO connect to BW using the BO integration kit for SAP solutions.
    3. no you dont have to have 3 different machines, using one BO machine you connect to them all, but you may need build a  BO environment, (Development, Production servers)
    good luck

  • Installation with external database

    I'll submit an RMS request for this, but one of the more annoying things is that if the installation goes "wrong" during the database install (ie, installing to Oracle, or external SYBAS, or SQL), you cannot just "redo" the database part
    Rather, it rolls EVERYTHING back and you have to start all over from scratch.
    Could we have like a "retry" button or something in case we butter-fingered something to re-enter it?
    Also the documentation for Oracle, lists that you should review database information and review SQL scripts
    So here I am thinking that the install screen/summary actually gives you this information.
    It does not.
    Where pray tell, is the database info on the summary? Oh, that's right, it's not there.
    SQL scripts? No mention of them at all in the product documentation for Oracle, let alone trying to find them on the install summary.
    I know our Oracle folks were quite interested to see what the scripts would actually attempt to do (I know this was a major issue with ZAM and getting Novell to even release the scripts, let alone support them). Seems that mentality has carried over to ZCM.

    Khurni,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Installation with Existing Database Fails

    We're installing SCVMM 2012 R2 and upgrading an existing 2012 R2 CU4 database. The installation fails after running for about 30 minutes with these lines in the SetupWizard.log
    03:53:43:Failed sql script: Threw Exception.Type: Microsoft.VirtualManager.DB.CarmineSqlException, Exception.Message: Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again.
    03:53:43:StackTrace:   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.Setup.DBConfigurator.ExecuteScript(SqlContext ctx, String fileName)
    03:53:43:InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value to enable this feature. See help for the SET COMPATIBILITY_LEVEL
    option of ALTER DATABASE.
    Must declare the scalar variable "@error".
    Must declare the scalar variable "@error".
    03:53:43:InnerException.StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    03:53:43:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.DatabaseConfigurationException, Exception.Message: The Virtual Machine Manager database can not be upgraded.
    The Virtual Machine Manager database SCVMM2008Prod was not upgraded. Try a new database and run Setup again.
    Has anyone seen this before? The SQL is remote but is reachable.
    Orange County District Attorney

    We have to dig deeper on this one. Can you check the SQL errorlogs for related information?
    You must verify that the databases is working, have enough space, is healthy etc.
    The logs should tell you if everything is allright.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • P6 Professional 8.3 installation with Oracle Database

    Hi All,
    I had query about P6 professional installtion.
    If i select Driver type "Microsoft SQL Server" system is allowing me to enter "Host Name" of database server.
    But if i select Driver type "Oracle" it is not asking for Host Name of database server.
    If my database is present on other server how to give server name here?

    Hi,
    This is down to a fundamental difference between SQL Server and Oracle.
    SQL Server is pretty much always referenced with servername and database name (and the port number unless the \<instance name> is used as part of the server name)
    Oracle uses more of an 'Alias' (TNS Names).
    If you ever need to start working with Oracle DB Standard or Enterprise edition then you will soon learn to be configuring the tnsnames.ora file (which is where you will find the 'Alias' mapped to the server and database name).
    Regards
    Alex

Maybe you are looking for