RAC node outage causes SOA Suite 10.1.3.4 BPEL failure

Using weblogic 9.2 and the SOA Suite 10.1.3.4. We use a 10g Oracle RAC ( 2 nodes ); the WL cluster has a multi data source of 2 pools, each pool pointing to a single node in the rac, each pool deployed to the cluster, and the multi data source in load-balancing mode.
So the other night, one of the db nodes had a hardware failure ( ironically, with a remote monitoring / management card ). Annoying, but it should not have caused the BPEL servers to be in "FAILED NOT RESTARTABLE" status the next morning.
Jun 9, 2009 12:10:07 AM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "esbaqds2": Io exception: The Network Adapter could not establish the connection>
SEVERE: Destroying JMSDequeuer failed
oracle.jms.AQjmsException: Connection has been administratively destroyed. Reconnect.
at oracle.jms.AQjmsSession.preClose(AQjmsSession.java:980)
at oracle.jms.AQjmsObject.close(AQjmsObject.java:409)
at oracle.jms.AQjmsSession.close(AQjmsSession.java:1020)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroy(JMSDequeuer.java:419)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroyWithoutUnsubscribing(JMSDequeuer.java:395)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:175)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
followed by a 2 GB log file containing 1.3 million iterations of the following within the next 10 minutes before the managed servers failed.
java.lang.NullPointerException
at java.lang.String.<init>(String.java:144)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:168)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Both managed instances of the BPEL cluster failed, even though the 1st node of the Oracle RAC was still available.
Our 10.3 cluster, also using multi data sources to the same RAC for the OSB components, simply went on about its business using the remaining rac node pool.
Seems to be a single point of failure...

We haven't changed the JDBC connection string yet, but we did run a test in the same environment while Oracle support considers the situation.
For the test, we simply shutdown one node of the RAC and watched to see what happens. Within the space of a minute, the JDBC "Failed Reserve Request Count" was increasing by thousands on every refresh of the screen. We restarted the RAC node after 5 minutes, by which time the "Failed Reserve Request Count" was over 190,000
The 2 BPEL managed servers remained in Running status and each created a 660 MB log file within that 5 minutes. In the original outage, the nodes were down for about 15 minutes. Most of the logging is being generated from within the oracle.tip.esb classes, not by the weblogic classes. It looks like that once the pool pointing to the downed RAC node becomes disabled, the Oracle BPEL code is still trying to use it even though the multi-source JNDI is the published lookup:
INFO: JMSDequeuer::createConnection - AQ Topics
java.sql.SQLException: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:250)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:348)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:364)
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:559)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.MultiPool.searchLoadBalance(MultiPool.java:331)
at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:202)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:77)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:346)
... 11 more
SEVERE: Failed to process deferred message
oracle.tip.esb.server.dispatch.QueueHandlerException: Error creating "weblogic.common.ResourceException: No good connections available."
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:661)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Similar Messages

Soa suite 10.1.3.1 bpel startup error

Hello,
I installed the soa suite 10.1.3.1 on Linux with Java 1.5.0-12. First I did a Advanced install. Everything was fine except, I used to get a:
Failed to read WSDL from http://localhost:port/orabpel/default/TaskActionHandler/1.0/TaskActionHandler?wsdl: HTTP connection error code is 500 for any BPEL process (Even the hello world). Then I undeployed that version and deployed a 'Basic' install. Still I get the same error in the console. On checking the application log in the orabpel deployment folder I saw this exception on both occasion:
07/12/15 11:09:09.340 10.1.3.1.0 Started
07/12/15 11:09:22.811 httpbinding: 10.1.3.1.0 Started
07/12/15 11:09:22.833 admin: 10.1.3.1.0 Started
07/12/15 11:09:22.867 console: 10.1.3.1.0 Started
07/12/15 11:09:22.896 startup: Error initializing servlet
java.lang.NoClassDefFoundError
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at javax.xml.soap.FactoryFinder.newInstance(Unknown Source)
at javax.xml.soap.FactoryFinder.find(Unknown Source)
at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:29)
at oracle.j2ee.ws.server.WebServiceServlet.init(WebServiceServlet.java:101)
at oracle.j2ee.ws.server.provider.ProviderServlet.init(ProviderServlet.java:104)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at com.collaxa.cube.ws.soap.oc4j.BPELOC4JServlet.init(BPELOC4JServlet.java:63)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2361)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4810)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4922)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1134)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
at com.evermind.server.Application.getHttpApplication(Application.java:545)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2450)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:998)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
07/12/15 11:09:22.897 startup: Error preloading servlet
The install says succesful...Any ideas? Thank.

thanks for the tip. applied the patch. but didn't help. it is just a no class def found error. How hard can it be to make it find the class it wants (as long as i get to know what class it wants!)

SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sun Jan 11 19:33:46 PST 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
When I check the log I can see this:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>soasit.BCR.WAN</HOST_ID>
<HOST_NWADDR>172.19.128.128</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>15</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>ServletException cause</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
     at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
     at _index._jspService(_index.java:104)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at java.lang.Class.getMethod(Class.java:1581)
     at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
     at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
     at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
     ... 52 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
The platform is one for development installer on RedHat 5 OS.
Any ideea ?
Edited by: [email protected] on Jan 26, 2009 4:34 PM

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

SOA SUITE 10.1.3.4 BPEL Console Login Issue

I have been hopeless for the past one week. CAn't get a single clue that what happened to my soa server. Each time I log in to the BPEL Console I get the following error NO domain accessible to the user logged in.
I am using 10.1.3.4 bpel and OS-env:-winxp
I have checked my backend database they are alll up.
I tested through Jdev by creating a new Integration server connection and get the following
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: OK
From the application.log file I have got the following error which I feel bit clueless to me.
09/01/24 03:04:38.822 startup: Error preloading servlet
javax.servlet.ServletException:
ORABPEL START-UP ERROR!!!!!!!!
OraBPEL run-time system failed to start due to exception:
     at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:87)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
     at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
     at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
     at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
     at com.evermind.server.Application.getHttpApplication(Application.java:586)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1970)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.getHttpApplication(HttpSite.java:1922)
     at com.evermind.server.http.HttpSite.startHttpApplications(HttpSite.java:1851)
     at com.evermind.server.http.HttpServer.startHttpApplications(HttpServer.java:921)
     at com.evermind.server.Application.start(Application.java:1987)
     at oracle.oc4j.admin.management.mbeans.J2EEStateManageableObjectBase.start(J2EEStateManageableObjectBase.java:213)
     at oracle.oc4j.admin.management.mbeans.J2EEApplication.start(J2EEApplication.java:1348)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
     at sun.reflect.GeneratedMethodAccessor84.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:243)
     at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1071)
     at javax.management.modelmbean.RequiredModelMBean.invoke(RequiredModelMBean.java:953)
     at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:700)
     at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
     at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
     at oracle.oc4j.admin.management.mbeans.J2EEApplication.commonStart(J2EEApplication.java:1434)
     at oracle.oc4j.admin.management.mbeans.J2EEApplication.start(J2EEApplication.java:1345)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
     at sun.reflect.GeneratedMethodAccessor84.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:243)
     at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1071)
     at javax.management.modelmbean.RequiredModelMBean.invoke(RequiredModelMBean.java:953)
     at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:700)
     at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
     at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
     at oracle.oc4j.admin.jmx.server.state.ApplicationStateFilterMBeanServer.invoke(ApplicationStateFilterMBeanServer.java:572)
     at oracle.oc4j.admin.jmx.ejb.MBeanServerEjbBean.invoke(MBeanServerEjbBean.java:365)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxSupportsInterceptor.invoke(TxSupportsInterceptor.java:37)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:844)
     at MBeanServerEjb_RemoteProxy_1me2j7.invoke(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
When I login to the bpel domain I get the following....
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Fri Jul 18 07:32:24 PDT 2008
Build type: release
Source tag: PCBPEL_10.1.3.4.0_GENERIC_080718.0645
Exception Message:
java.security.AccessControlException - access denied (com.collaxa.security.ServerPermission server read)
Though my esb console, orawsm,rule author, hw_service all are working fine. For your info I am using default file based security. realm is jazn.com
THe problem I fetched since I registered soa_oc4j with OID. and then assign orabpel instance level security provider to OID. later I switched to again my default existing file based security without checking OID is working or not. I restarted oc4j container, soa_oc4j and restarted database.DOne everything but all failed.
Tried all possibility gone in vain. My requirement is so urgent that I am dying for it.
plz if somebody can come up with a solution It will be highly appreciated.
domain.log gives me the following..
<2009-01-24 03:04:35,760> <ERROR> <default.collaxa.cube.engine.deployment> <DeploymentManager::loadAllProcesses> Error while loading process 'BPEL_oracle_application', rev '1.0': BPEL domain uninitializing.
The BPEL domain "default" is currently uninitializing; the domain may not be accessed anymore.
ORABPEL-02054
BPEL domain uninitializing.
The BPEL domain "default" is currently uninitializing; the domain may not be accessed anymore.
     at com.collaxa.cube.engine.deployment.DeploymentManager.extractProcess(DeploymentManager.java:1176)
     at com.collaxa.cube.engine.deployment.DeploymentManager.loadAllProcesses(DeploymentManager.java:332)
     at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:957)
     at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:313)
     at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:279)
     at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:273)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at ServerBean_RemoteProxy_4bin6i8.loadProcesses(Unknown Source)
     at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:379)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)

Hi AJ,
I have not followed the same. I have done to register OID from em console. and then simply changed the security provider as newly registered OID with bpel and hw_services.Is there any way to revert it back.*however I have found that the is_config.xml.BPM is missing from the <SOA_HOME>/bpel/system/services/config directory.*
Later anyhow I have restored file based security provider to all the component currently running on my OAS. Here is the status of my jazn.xml file. Now I do not need OID at all.
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com">

     <property name="idm.authentication.name" value="JavaSSO"/>
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
     <property name="idm.token.type" value="HTTP_COOKIE"/>
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>

     <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
     <property name="custom.sso.key.alias" value="ssoSymmetricKey"/>
</jazn>

BPEL Control in SOA Suite 10g doesn't display BPEL Process deployed in jdev

Hello,
I've created a directory in C:\ as Examples for my demo BPEL Projects.
After deployment is successful using Jdeveloper, BPEL Control in Oracle Application Server 10g doesn't display the BPEL process in Dashboard. This is possible only if I have my BPEL Projects placed under /jdev/mywork folder or I have to click on "Deploy New Process" and select the jar file from /bpel/output directory.
How do I make BPEL control to look for the deployed bpel jars by default in C:\Examples folder?
Help appreciated!

bpel control won't look at those locations when you have deployed a bpel process
after deployment it will unpack the jar in some tmp location in your domain
i'm sure what you mean with those 2 locations, they both have nothing to do with a deployed version of your bpel.
jdev will generate the jar for you and after that it will be deployed to the application server. After that the jar isnt needed anymore in your jdev workspace, it's already on the server itself

Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo error

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

Oracle SOA Suite 11g VS BPEL PM 11g

Hello,
What is the difference between SOA Suite 11g and BPEL Process Manager 11g?
I understand BPEL PM is a component of SOA Suite 11g.
What capabilities does SOA Suite offer more than BPEL Process Manager 11g?
When does a customer choose BPEL PM 11g over SOA Suite 11g? I assume BPEL PM 11g will be less in terms of cost.
Thanks,
Ram

Ram,
What is the difference between SOA Suite 11g and BPEL Process Manager 11g?BPEL Process Manager 11g is a standalone product and it is part of SOA Suite 11g as well. SOA Suite 11g is actually a group of products and it includes -
Oracle BPEL Process Manager
Oracle Service Bus
Mediator
Oracle Business Activity Monitoring
Oracle Web Services Manager
Oracle Business Rules
Oracle Human Workflow
Oracle Event Processing
JDeveloper and ADF
Adapters
Oracle Entitlements Server Basic
Oracle B2B
So you cannot compare SOA Suite with BPEL.
What capabilities does SOA Suite offer more than BPEL Process Manager 11g?Oracle BPEL Process Manager enables enterprises to model, deploy, and manage BPEL (Business Process Execution Language) processes. It includes a BPEL business process modeler, a scalable BPEL run-time engine, an extensible WSDL binding framework, and a monitoring console. So use of BPEL is limited till business process implementation only whereas SOA Suite offers complete middleware SOA solution.
When does a customer choose BPEL PM 11g over SOA Suite 11g? I assume BPEL PM 11g will be less in terms of cost.Yes, if you want to implement BPEL processes only then you can buy only BPEL Process Manager 11g but if you are looking for to implement a complete middleware SOA solution then licensing SOA Suite 11g will be the better option.
Regards,
Anuj

Upgrade of SOA Suite 10.1.3.4 weblogic server

We have Oracle SOA Suite 10.1.3.4 with weblogic 9.2 as application server. Can we safely upgrade weblogic server to 10.3.2 without disturbing SOA Suite deployments. e.g. BPEL processes.
thanks

Hello Derek !
Let me clarify:
1. FP for SOA Suite on OC4J requires advance install of SOA Suite.
2. FP for SOA suite on WLS requires basic version of SOA Suite.
Though the SOA Install guide for WLS talks about explicitly http://download.oracle.com/docs/cd/E10291_01/doc.1013/e11848/weblogic.htm#BHCBEIBE
I agree that this information is not explicit enough in AIA Install guide, I will see if this can be included in existing 2.4 guide and a new version be uploaded to metalink. if not I will have this corrected for 2.5 guide.
and you are correct , MLR 7 is not certified on WLS, after MLR3, only MLR 8 is certified on WLS.
Thanks
-Teja

Is XA transactions supported for the SOA Suite 10.1.3.4 on weblogic platfor

There are 2 weblogic domains 1 & 2. Domain 1 hosts the JMS queue and domain 2 hosts the BPEL process. The BPEL process in domain 2 uses JMS adapter to get messages from domain 1. With queues on Weblogic domain 1, is XA transactions supported for the SOA suite 10.1.3.4 BPEL process JMS Adapter on weblogic domain 2?

There are 2 weblogic domains 1 & 2. Domain 1 hosts the JMS queue and domain 2 hosts the BPEL process. The BPEL process in domain 2 uses JMS adapter to get messages from domain 1. With queues on Weblogic domain 1, is XA transactions supported for the SOA suite 10.1.3.4 BPEL process JMS Adapter on weblogic domain 2?

SOA Suite queuing mechanism?

Hi,
We have an integration project where we need a queuing mechanism. Transactions come in during the day. Some of them should be transformed and routed to one of the target systems, but some of them need to be pause and first be routed during the evening/night. Which options do we have in the SOA Suite? If we use BPEL we could use the Wait Activity, but what if we have thousands of waiting transactions? Are there other options? What about the ESB?
I was thinking about using an AQ queue, but if SOA has something we can use I rather use that.
Regards Pete

Thanks,
The customer has bought the SOA Suite so that is the platform we have to use. I am a database guy, so all this mocking about in the middle tier makes me itch :-)
There is going to be a bunch of integrations but the first one has XML messages coming in from several systems. The messages have to be transformed to another XML format and send to one system. The receiving system has a performance problem so we have to queue all messages and then make sure that we only send XX messages per minute/hour. So event if we use the Wait activity in BPEL we still have a problem with making sure that only a certain number of messages are send to the receiving system. I can see a straight forward way of doing this with a table or AQ. Are the any help in BPEL/ESB?
I know that BPEL can handle thousands of transactions; I am just a bit worried about having thousands of transactions that has to be dehydrated to the database and woken up now and then to check if it is ok to proceed.
Regards Pete

What are the SOA suite Components

HI
I m new in SOA
What are the SOA suite Components
Thanx

Hi,
SOA suite components in 10g:
Oracle BPEL Process Manager
Oracle Enterprise Service Bus (ESB)
Oracle JDeveloper
Oracle Business Rules
OracleAS Integration Business Activity Monitoring
Oracle Web Services Manager
OracleAS UDDI Registry.
SOA suite componets in 11g.
Detailed components list is mentioned in the below link
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10223/01_components.htm
Regards,
Edwin

Install soa suite in 2 nodes cluster

Hi;
I need install soa suite 10.1.3.3.4 in cluster of 2 nodes. But i don´t know how to setup the bpel, esb and wsm in Hight availability.
Help.
Thank You

go through this. THis might help you..
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm#BGBCBDCG

RAC-to-RAC Node ONE cloning of E-business Suite

Hi,
I want to clone RAC-to-RAC node one 11gr2/r12.0.6 of e-business Suite.
Is threre any step diffrent than Note 559518.1? Any advice.
thanks

I want to clone RAC-to-RAC node one 11gr2/r12.0.6 of e-business Suite.
Is threre any step diffrent than Note 559518.1? Any advice.
This document is all what you need.
You could also see the docs in (Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]) for R12.
Thanks,
Hussein

Installing SOA Suite 10.1.3.4.0 on a Solaris cluster (2 nodes)

Hi All,
I have been looking for guidance on the installation of SOA Suite 10.1.3.4.0 on a Solaris cluster, and have been unable to find any. Does anyone have any info on this task? Or as an alternate question, how different is the cluster setup on Solaris from Linux?
Thanks
Sami

There is no difference on installing a cluster on Solaris or Linux. The main difference are the required O/S packages. The you could follow my approach on installing a cluster:
http://orasoa.blogspot.com/2009/04/soa-cluster-installation.html
Marc

[INFO] SOA Suite 10.1.3.4 Patch Set #7272722

SOA Suite의 각 component에 대해 10.1.3.4에서는 아래와 같은 bug들이 fix되었습니다.
10.1.3.4. PatchSet은 기존의 10.1.3.x 버전들의 패치들을 모두 포함하고 있으므로 한 번에 업그레이드가 가능합니다.
자세한 설치 방법 등은 Metalink와 patch document를 참조하시기 바랍니다.
===================================================
2.4 Oracle ESB Bugs
===================================================
10.1.3.4 6133446 Not available
10.1.3.4 6028985 MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE ORAESB.ESB_CONTROL
10.1.3.4 5997936 ESB FAULT DOES GET PROPAGATED TO ASYNC BPEL PROCESS WHEN FAULT HAPPENS.
10.1.3.4 6158128 Basic Authentication using HTTP binding will be supported with this fix
10.1.3.4 6166991 Accessing WSIL URL like "http://<host:port>/esb/wsil/TOLL/TestBPEL?wsdl" shows NPE at startup Also In BPEL-ESB scenario, ESB fails at startup due to undefined WSDL.
10.1.3.4 6316554 When Consume functionality of JMS Adapter for BEA Weblogic fails with XML parsing error
===================================================
2.9 Oracle BPEL Process Manager Bugs
===================================================
10.1.3.4 5262020 BPEL Compile fails to validate any of XSD GROUP Elements. BPEL Compiler fails with Erros like: Error(155): [Error ORABPEL-10057]: invalid query ..
10.1.3.4 5642667 NPE While Invoking a BPEL Process from SOAP Client.
10.1.3.4 5956575 AQ Adapter deadlocks when activation instances are high. set flag 'useDefaultConnectionManager="true" in oc4j-ra.xml for AqAdapter, to make this patch effective. Set this flag only for inbound AQ Adapter. Always set this flag to "false" for outbound AQ Adapter.
10.1.3.4 6000957 WS SECURITY HEADERS PASSED VIA PARTNERLINK CAN BE 2002/07 COMPLIANT IF OASIS2004COMPLIANT PARTNERLINK PROPERTY IS SET TO FALSE
10.1.3.4 6070345 When the console is used to clear the wsdlCache, in a load-balanced Clicking clear WSDL cache from the console will now propagate the message to the other nodes in the BPEL cluster. Previously, clicking the button would only affect the single node.
10.1.3.4 5842365 When user worklist is accessed via Portal page, with status=ASSIGNED, a prior ity = value other than "ANY" in the filter fetches null resultset, even thoug h qualified tasks are assigned to the user.
10.1.3.4 5937320 NULL POINTER EXCEPTION was thrown when we validate a xml which has null values inside it.
10.1.3.4 6132141 PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM UNDEPLOYED PROCESSES
10.1.3.4 5956575 AQ Adapter deadlocks when activation instances are high. set flag 'useDefaultConnectionManager="true" in oc4j-ra.xml for AqAdapter, to make this patch effective. Set this flag only for inbound AQ Adapter. Always set this flag to "false" for outbound AQ Adapter.
10.1.3.4 6073311 Under certain circumstances, when multiple callbacks are received at the same time, the first callback will be processed but the remaining callbacks will throw a "scope not found" error. Fixed by serializing the callbacks.
10.1.3.4 6141259 BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP BINDING IN BPEL
10.1.3.4 6240028 Release Notes: WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS CANNOT BE INVOKED
10.1.3.4 6316613 RELEASE NOTES: a. change process state from active to retired b. Restart bpel server c. Make process state active again. d. Induce a midprocess activity; activation agents do not fire. . RELEASE NOTES: a. change process state from active to retired b. Restart bpel server c. Make process state active again. d. Induce a midprocess activity; activation agents do not fire. .
10.1.3.4 5926809 Release Notes: If no instance is created due to XPath expression errors then this bug has been hit.
10.1.3.4 6005407 With this fix. Any unhandled exception during a sync call will be returned to the caller.
10.1.3.4 6086281 Release Notes: An arrayindex out of bound exception is thrown during outbound execution for SignZoned data types.
10.1.3.4 6073117 Release note: With a task assigned to a group, when it gets acquired by a user who also is an admin, the user cannot do any other actions except "release" and thus the user experiences an infinite loop of claim->release->claim states.
10.1.3.4 6148021 Release Notes: BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL GIVES IMPROPER OUTPUT. Release Notes: BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL GIVES IMPROPER OUTPUT.
10.1.3.4 6086453 DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR EXISTING NODES
10.1.3.4 5945157 design time BAM sensor action wizard not resposive, hangs after clicking OK
10.1.3.4 5919412 If we try to invoke a bpel process via Axis client api, then we get an AxisFault and client does not fetch info properly.
10.1.3.4 5990764 ></com:Note> MailActivationAgent not able to process XML documents when send as as mail attachment with content-type="text/xml".
10.1.3.4 5747361 BPEL MESSAGES IN MANUAL RECOVERY QUEUE AND LOG FILES SUGGEST ERROR IN JDBC BATCH UPDATE
10.1.3.4 5999832 Decision Services using a WebDAV based rule repository might fail with a null pointer execption under heavy load. Decision Services using a WebDAV based rule repository might fail with a null pointer exception under heavy load.
10.1.3.4 5262020 BPEL Compile fails to validate any of XSD GROUP Elements. BPEL Compiler fails with Erros like: Error(155): [Error ORABPEL-10057]: invalid query ..
===================================================
2.12 Oracle Web Services Bugs
===================================================
10.1.3.4 5962677 Removed unnecessary response soap envelope in the case of one-way invocation.
10.1.3.4 5841127 Deployment fails with compilation error for a topDown assembled webservice application.
10.1.3.4 5968831 Throws CLASSCASTEXCEPTION for accessing security enabled webservices. Throws CLASSCASTEXCEPTION for accessing security-enabled Web services.
10.1.3.4 6041249 Deployment of webservices fails with UnsupportedCallbackException.
10.1.3.4 6051357 Certiface for encryption not found while encrypting SOAP response . Certificate for encryption not found while encrypting SOAP response
===================================================
2.16 Oracle Application Server Integration BAM Bugs
===================================================
10.1.3.4 6086297 Not available
10.1.3.4 5936159 "Object expected" and "'m_bIgnoreChangeLists' is undefined" errors appear
10.1.3.4 6372620 BAM SENSOR CREATION - XML MAPPER MISMATCH Creation of the XSL map for a BAM sensor action fails when source variable is defined by XSD imported by a WSDL
10.1.3.4 6346871 Not available
10.1.3.4 6600005 Not available
10.1.3.4 6599959 Not available
10.1.3.4 6796978 Surface Prompts were not displayed if a report was opened via a report link in an iframe in an html page.
10.1.3.4 6476606 Opening a view on an external data object that is filtered on a date field would fail.
10.1.3.4 6080618 Active data in a Collapsed List view could result in an "Unknown method"
10.1.3.4 6911095 ICommand exports invalid XML characters.
10.1.3.4 6705910 Configure BAM with LDAP or similar custom authentication and try to assign folder permissions at the group level. The Active Studio design time will throw Javascript errors and folder permissions won't work as expected.
10.1.3.4 4933638 Plan Monitor stops working after ADC connection is lost
10.1.3.4 6130673 Drilling across to a target report with multiple views may only show one view when the target report is opened in a different window.
10.1.3.4 6930980 Create a new role ad add Administrator privelege to it. Assign a user to this new role. Login as this new user, click on Administrator webapp and try to add/delete users from an existing role. An exception window will pop up announcing that the user doesn't have permission to execute this action.
10.1.3.4 6355162 Stopping the BAM services can cause errors in the service log files.
10.1.3.4 6919957 BAM Active Data Cache does not start if BAM schema is upgraded to Oracle database 11g.
10.1.3.4 4935584 The report view log can grow quite large causing the list of recently viewed reports on the Active Studio home page to take a long time to appear or to not appear at all.
10.1.3.4 6845898 Create an External Data Source using Oracle BI Server and try to create an External Data Object using this external data source. Attempts to browse this external data object will hang or cause exception.
10.1.3.4 7116903 When enabling the Message Tracking feature in an Enterprise Message The problem is that the unprocessed messages will not necessarily be read
10.1.3.4 6012490 Not available
10.1.3.4 7111368 Enterprise Link plans could fail with a System.OutOfMemoryException error.
10.1.3.4 7044132 Even when a recommended version of MS Excel is installed , a message appears THIS VIEW REQUIRES EXCEL TO BE INSTALLED
10.1.3.4 7030316 Not available
10.1.3.4 7020905 This could potentially cause bottlenecks in overall performance and
10.1.3.4 5850246 Not available
10.1.3.4 5996213 In IE7, extra white space appears at the bottom of the Active Studio window when opening the window as a pop-up in a tab instead of in a new window
10.1.3.4 6499630 Not available
10.1.3.4 6778538 Using drill across as a drill through action always uses the parameter values of the first data object in a Chart view with multiple data objects.
===================================================
2.17 Oracle Web Services Manager Bugs
===================================================
10.1.3.4 6145544 Unable to use extract credentials step in OWSM client agent.
10.1.3.4 6206956 The certificate given to the OAM step is not the signing certificate from

Ya, that may happen. When I login as a orabpel user to update Olite database, I forgot to login as a oraesb user.
but I think that will definitely solve the problem. Let me try and revert to you back.
Thanks.

RAC node outage causes SOA Suite 10.1.3.4 BPEL failure

Similar Messages

Maybe you are looking for