RAC on Oracle VM (2.1.1) as given in Note:567407.1
Hello,
I am trying to install a RAC configuration in an Oracle VM (2.1.1) environment (Following Note: 567407.1).
After much time and effort, I could bring everything upto installation of iscsi-target (on VM Server node) and iscsi-initiator utilities (on one of the Virtual nodes) successfully. The Server is built using Oracle VM 2.1.1 while I used installation media to install OEL 5.2 on the virtual node. The other RPMs for iscsi-target and client utilities are just the ones described in the above document (iscsitarget-0.4.16.tar on VM Server and iscsi-initiator-utils-4.0.3.0-5.i386.rpm for the node. While I could download the former from the specified location, I had to google the latter to download from fedora.redhat site).
However, when I run fdisk -l as given in the document, I don't see the virtual shared disk in the output. Only the local disk is displayed.
Anyone can help and/or point to the right direction? Much appreciate it.
Here is the output on the node (after starting iscsi client):
[root@el46n00 ~]# iscsi-ls -c -i0 -l
SFNet iSCSI Driver Version ...4:0.1.11-4(15-Jan-2007)
TARGET NAME : iqn.2001-04.com.oracle:rac
TARGET ALIAS :
HOST ID : 0
BUS ID : 0
TARGET ID : 0
TARGET ADDRESS : 10.1.1.10:3260,1
SESSION STATUS : ESTABLISHED AT Tue Jul 1 20:02:36 EDT 2008
SESSION ID : ISID 00023d000001 TSIH 100
TARGET CONFIGURATION KEYS :
INITIAL R2T : Yes
IMMEDIATE DATA : No
HEADERDIGEST : CRC32C
DATA DIGEST : CRC32C
FIRSTBURSTLENGTH : 65536
MAXBURSTLENGTH : 262144
MAXRECVDATASEGMENTLENGTH: initiator - 131072
target - 8192
LOGIN TIMEOUT : 120
ACTIVE TIMEOUT : 5
IDLE TIMEOUT : 60
PING TIMEOUT : 5
DEVICE DETAILS:
LUN ID : 0
Vendor: IET Model: VIRTUAL-DISK Rev: 0
Type: Direct-Access ANSI SCSI revision: 04
page83 type1: 494554000000000000000000010000001228000003008000
page80: 0a
Device: /dev/sda
[root@el46n00 ~]#
Here is the fdisk command and its output (only local disk displayed. No /dev/sda).
[root@el46n00 ~]# fdisk -l
Disk /dev/xvda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/xvda1 * 1 13 104391 83 Linux
/dev/xvda2 14 2610 20860402+ 8e Linux LVM
[root@el46n00 ~]#
uname -a on the virtual node:
Linux el46n00 2.6.9-67.0.0.0.1.ELxenU #1 SMP Sun Nov 18 00:38:24 EST 2007 i686 i686 i386 GNU/Linux
uname -a on the VM Server
Linux gramvs 2.6.18-8.1.15.0.16.el5xen #1 SMP Wed Mar 5 13:03:41 EST 2008 i686 i686 i386 GNU/Linux
Thanks and regards,
Govardhanan.
I am unable to find note 567407.1 you are refering to on MetaLink, not even through advanced search and the "Document ID" option...
Is it still there?
If so, can you provide a full URL to the document on MetaLink? TIA!
Similar Messages
-
Upgrade oracle 9i RAC to Oracle 11g RAC
Hi all,
db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.
thanks,
Visu.
Edited by: visu996253 on Apr 8, 2013 5:30 AMdb version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
http://www.oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - Oracle 11g Upgrade Companion
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222.pdf - Oracle® Database Upgrade Guide 11g Release 2 (11.2) E10819-02
Edited by: KR10822864 on Apr 8, 2013 5:52 AM
added more info. -
Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)
Hi,
Can anyne suggest me any Document in metalink or any other useful document on the
*"Step By Step Implementation of RAC in Oracle EBS R12 (version 12.0.4)"*.
My Database Version is 10g Enterprise Edition Release 10.2.0.4.0 and my Platform is HP-UX ia64.How To Find Out The Example of The LOCAL_LISTENER and REMOTE_LISTENER Defined In The init.ora When configuring the 11i or R12 on RAC ? [ID 744508.1]
1072636.1 - Oracle E-Business Suite Release 12 High Availability Documentation Roadmap
Please check Hussein's discussion before
Rac and R12
R12 with RAC
Rac and R12
Moving from NON-RAC to RAC
R12 and RAC
Re: R12.1-RAC
EBS R12 on Linux with RAC -
How can i do the RAC with Oracle 9i ?
How can i do the RAC with Oracle 9i ?
The Oracle 9i has a RAC(Real Application Cluster)module , please who can tell me how can i let it working .
Which hardware the RAC need's
Thank All ,
[email protected]That is right you need atleast 2 boxes. The two servers will use the same hard disks.
The concept is an extension of OPS(Oracle Parallel Server).
Basically, you install Oracle Server Software on both the boxes, One database will be shared by both the servers. You can access your database through the Server1 or Server2. If Server1 fails then the Server2 will take over all the connections. You can add or remove any servers to and from the cluster any time you want with out impacting your production.
They share load, reliable, scalable.... -
We have a RAC running for two instances , we have noticed that one trigger on update which is using a sequences to get ids is not allocating such sequences
on sequence as expected , is every instance of RAC caching a set of sequences and the other instance have no idea about this , is this a configuration which has
to be done at RAC levelsayantan chakraborty wrote:
what is the difference between RAC and Oracle clusterware?RAC = Oracle Real Application Clusters
http://www.oracle.com/technology/products/database/clusterware/clusterware_for_unbreakable_linux_faq.html#
In the event of a system failure, clustering ensures high availability to users. Redundant hardware components, such as additional nodes, interconnect, and disks, allow the cluster to provide high availability. Such redundant hardware architectures avoid single points-of-failure and provide exceptional fault resilience.
In Oracle Real Application Clusters (RAC) environments, Oracle Clusterware monitors and manages Real Application Cluster databases. When a node in the cluster is started, all instances, listeners and services are automatically started. If an instance fails, the clusterware will automatically restart the instance, so that the service is often restored before the administrator notices it was down. In this sense Oracle Clusterware is the basis for Oracle Real Application Clusters.
In those environments RAC ensures the continuous operation of the database as well as its scalability by running more than one database instance simultaneously, typically one on every node in the cluster.
You cna
how to get RAC 10g?What did you mean?
If you mean Software:
http://www.oracle.com/technology/software/index.html
Docs:
http://www.oracle.com/technology/products/database/clustering/index.html
http://www.oracle.com/pls/db102/portal.portal_db?selected=16
Or Search on Google
http://www.google.co.th/search?rlz=1C1GGLS_thTH327TH327&sourceid=chrome&ie=UTF-8&q=Oracle+Real+Application+Cluster
Good Luck -
Oracle10g RAC with Oracle clusterware
Hi,
We are installing Oracle10g RAC with Oracle clusterware with ASM on Solaris 10. Does anybody have a installation/configuration manual for this combination.
Thanks,
MurtujaSun would not recommend using Oracle 10g RAC without Sun Cluster. Setup for that configuration would be found in the Sun Cluster Data Service for Oracle 10g RAC and the Oracle installation manuals.
The installation of Oracle Clusterware alone would be documented in Oracle's manuals. If you have any problems with that, you are better off asking Oracle.
Regards,
Tim
--- -
Can RAC support Oracle VMs ONLY ?
Can RAC support Oracle VMs (virtual servers only) ? ie No physical servers.
or must have a mix of physical and virtual servers for RAC ?
QNNo Real Application Cluster technology has ever supported more than one database.Quite untrue.
I know that both you and Tom Kyte take the stand that a cluster should have only 1 instance per node.
That doesn't mean that it is not possible to have more than one database in a cluster -- i.e more than one instance in a node.
That doesn't mean that it must always be so. Installing a separate cluster and additional EE + RAC licences for a separate database can be quite expensive. Of course, your reply is "consolidate". That is another debate that has been going on for years.
A discussion on multiple databases on RAC is also at
http://www.freelists.org/post/oracle-l/multiple-databases-in-a-single-RAC-cluster
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 12, 2010 11:15 AM -
Oracle 8.1.7 on linux. plslq block not compiled
I created table test
create test (a varchar2(100),b varchar2(100));
I send query:
delete from test
where (a, b) in (('Z','V'),('X', 'C'),('S', 'P'),('D', 'Y'));
All ok;
I send pl/sql block:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'),('D', 'Y'));
end;
Server proccess associated with my session using 100% of CPU and 10 min later
my client receive error ORA-04031:
begin
ERROR at line 1:
ORA-04031: unable to allocate 1024 bytes of shared memory ("shared pool","begin
delete from test
w...","PL/SQL DIANA","PAR.C:parchk:page")
When I send:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'));
end;
all ok
What is the reason?
nullI think that the problem is not in size of shared_pool. I changed this parameters but it is not help me. I tested this pl/sql block on such computer with such parameters of kernel and oracle but version of oracle was 8.1.6 - all ok.
I solved this problem by using another pl/sql block:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'));
delete from test
where (a, b) in (('D', 'Y'));
end;
And that is why I have a question: Is it Oracle(8.1.7 on Linux) bag or not?
null -
Oracle.forms.webutil.file Transfer.File Transfer bean not found
I've followed tons of instructions for 2 days to install and configure webutil and I finally have success with the demo. However, when I add this to my own form and use the CLIENT_IMAGE.READ_FILE_IMAGE
I end up with error oracle.forms.webutil.file Transfer.File Transfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
What am I missing? Thanks for any help.Make sure your form subclasses object group webutil.olb, and that webutil.pll is also attached. Make sure that your forms folder contains webutil.plx (a compiled version of webutil.pll). Unless the default config (in formsweb.cfg) includes the entries required for webutil support, you must specify a config that does have these entries. 10g, which comes configured for webutil, provides a config called webutil for this. An example URL might look like:
http://myappserver/forms/frmservlet?form=myform.fmx&config=webutil
There could be other problems, but since you're able to run the demo forms, I'm guessing that what I've mentioned are the first things for you to check.
Hope this helps,
Eric Adamson
Lansing, Michigan -
Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."
Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
AshleyI found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley -
ORACLE ADF 11g /JSF TO serviet (Service method) not invoking
Hi,
ORACLE ADF 11g /JSF TO serviet (Service method) not invoking
My project name is : ComplProject
inside the project im having 1 jsp say x.jsp
work environment : (oracleADF 11g) jdev11 and weblogic server 10.3
in x.jsp im displaying 1 go link -> when ever we click on GO link it should go to ComplServlet.java
i tried like,
FacesContext.getCurrentInstance().getExternalContext().redirect("/servlet/ComplServlet");
the "ComplServlet" is an URL pattern in web.xml which points to servlet.
but not working
i pointed to faces-config.xml also , not working
i tried to forward like
FacesContext context = FacesContext.getCurrentInstance();
ServletContext sContext = (ServletContext)context.getExternalContext().getContext();
ServletRequest request = (ServletRequest)context.getExternalContext().getRequest();
System.out.println("third line...............");
HttpServletResponse response = (HttpServletResponse)context.getExternalContext().getResponse();
response.sendRedirect("/servlet/ViewDocument");
sContext.getRequestDispatcher("/servlet/ViewDocument").include(request, response);
brief
(from jsf page) after clicking on GO LINK i need to redirect or control should go to servlet ->service method
thanks in advance
regards,
sandeepHi,
i tried like,
FacesContext.getCurrentInstance().getExternalContext().redirect("/servlet/ComplServlet");
the "ComplServlet" is an URL pattern in web.xml which points to servlet.
but not workingUse like following.
public HttpServletRequest getServletRequest() {
return (HttpServletRequest)facesContext.getExternalContext().getRequest();
public redirect(String url){
getServletRequest().sendRedirect(getServletRequest().getContextPath() + "/servlet/ComplServlet");
}If you are using golink as frank suggested then use it like this.
<af:goLink text="ComplServlet" destination="/servlet/ComplServlet"/>no need of using context when using goLink,
Regards,
Santosh. -
Does oracle 9i support inctype option in exp or not?
I want to know whether oracle 9i supports inctype option in exp or not......
if not then how to take a incremental export..........
Exp userid=DBA/password full=Y inctype=cumulative file=’010399cml.dmp’
i am getting an error message
EXP-00042: INCTYPE parameter is obsolete
although exp command is working even after generating an error........EXP-00041 INCTYPE parameter is obsolete
Cause : Export encountered when parsing the parameter INCTYPE Export options. Incremental Exports are no longer supported.
Action : Consult the Oracle9i User-Managed Backup and Recovery Guide. Export will attempt to continue.
This incremental into law has become obsolete, not to be supported. -
Oracle APP'S Installations Context Value Management Could not started
oracle APP'S Installations Context Value Management Could not started
how it is startedFadi, Context Value Management runs during Rapid Install or AutoConfig to make sure the context file is in good order. If it fails at the time of the installation, then most probably you have missing components at the OS level.
-
Oracle CRM On Demand Release 16 Patch Release Notes 1080.0.0
Oracle CRM On Demand Release 16 Patch Release Notes 1080.0.0 is now available on MetaLink. The document ID is 860682.1
hi bobb,
would it be possible to send me the document as well. my email : [email protected]
regards,
Stephan -
Whether using Oracle after migrating from MySQL be easy or not?
Though oracle is tough secured one, I don't know exactly the complexity of using Oracle database. Using MySQL 4.1.22 in my website https://www.puntercalls.com/ . Though the site is based on providing share market tips, it deals with a huge amount of stock market data and in much more real time basis hand-to-hand with NSE and BSE info which means a tough security is the utmost demand of the time.
My question is whether using Oracle after migrating from MySQL be easy or not. You can check my site at https://www.puntercalls.com/ for different real time data updation parts.
Kind suggestions are greatly appreciated in advance!
Edited by: 968684 on Oct 31, 2012 7:04 AMHi,
As you are really asking about how to setup and use securioty features in an Oracle database it woul db ebetter to raise the question in this forum -
Forum: Database Security - General
Database Security - General
They will have more knowledge about Oracle security features and which it would be best for you to use.
Regards,
Mike
Maybe you are looking for
-
Can't load Google Calendar. I'm getting this message: "Firefox prevented this page from automatically redirecting to another page" but unchecking the box for "Warn me when websites try to redirect or reload the page" has not helped. I'm using Firefox
-
Front Row on an External Display
**Note that this is for Leopard's Front Row and only may not apply to Tiger's** Here's an explanation of the bugs/irksomes now facing Front Row 1. The screensaver option can be buggy so go to preferences within Front Row to disable it. 2. Whatever sc
-
SavePanelState crashes in 64-bit build
I am coding the setup tab for a test application. The user enters data into several fields on a main panel and clicks a button when finished. I am trying to use the SavePanelState and RecallPanelState functions to save and restore the setup data to
-
Problem displaying tabset in mac osx
i'm using WInXP version of JSC 2 to develop a web app. The tabset i created display perfectly in IE but neither safari, opera nor firefox able to display the tabset in my mac osx. Is it web app develop by windows version of JSC not compatible to disp
-
Error-local collection types not allowed in SQL statements
TYPE WEEK_NUM_T IS VARRAY(10) OF VARCHAR2(10); vc_weeknum WEEK_NUM_T; SELECT DISTINCT to_char(y.week_number_in_year) BULK COLLECT INTO vc_weeknum FROM DD_TMP x, TIME y WHERE x.DATE_TM = y.ORACLE_DATE; INSERT INTO TMP_HOLD (SELECT *