RADIUS COA on software version 12.4 using 3845 router

We  working to provide dynamic badwidth control by using RADIUS COA to 3845 router.
When we issue the COA 3845 rejects the message with invalid session id message.
We are using following instructions to craft RADIUS COA  message.
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/htipmaaa.html

Hi Manuel,
I have PPPOE client running directly against 3845 and terminating PPOE. Authentication, authorization and accounting work against FreeRADIUS.
Next step for us is to manage subscriber connections by sending COA to change service parameters.
Our system sends RADIUS COA as in below.
You can find the packet dumps, configuration and Cisco log below.
Thank you for responding and looking forware to your next response.
Igor
*** Example with Shaping ***
policy-map SHAPE-TEST
class class-default
shape average 48000
Using: cisco-avpair = "ip:sub-qos-policy-out=SHAPE-TEST"
======================== Packet capture =================================
No.     Time                          Source                Destination           Protocol Info
      1 2000-01-01 08:46:03.257911000 172.16.2.218          172.20.2.55           RADIUS   CoA-Request(43) (id=1, l=49)
Frame 1: 91 bytes on wire (728 bits), 91 bytes captured (728 bits)
    Arrival Time: Jan  1, 2000 08:46:03.257911000 Eastern Standard Time
    Epoch Time: 946734363.257911000 seconds
    [Time delta from previous captured frame: 0.000000000 seconds]
    [Time delta from previous displayed frame: 0.000000000 seconds]
    [Time since reference or first frame: 0.000000000 seconds]
    Frame Number: 1
    Frame Length: 91 bytes (728 bits)
    Capture Length: 91 bytes (728 bits)
    [Frame is marked: False]
    [Frame is ignored: False]
    [Protocols in frame: eth:ip:udp:radius]
    [Coloring Rule Name: UDP]
    [Coloring Rule String: udp]
Ethernet II, Src: HewlettP_af:82:b5 (2c:27:d7:af:82:b5), Dst: IntelCor_b3:18:58 (00:1b:21:b3:18:58)
    Destination: IntelCor_b3:18:58 (00:1b:21:b3:18:58)
        Address: IntelCor_b3:18:58 (00:1b:21:b3:18:58)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
        .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
    Source: HewlettP_af:82:b5 (2c:27:d7:af:82:b5)
        Address: HewlettP_af:82:b5 (2c:27:d7:af:82:b5)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
        .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
    Type: IP (0x0800)
Internet Protocol, Src: 172.16.2.218 (172.16.2.218), Dst: 172.20.2.55 (172.20.2.55)
    Version: 4
    Header length: 20 bytes
    Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
        0000 00.. = Differentiated Services Codepoint: Default (0x00)
        .... ..0. = ECN-Capable Transport (ECT): 0
        .... ...0 = ECN-CE: 0
    Total Length: 77
    Identification: 0x5b26 (23334)
    Flags: 0x00
        0... .... = Reserved bit: Not set
        .0.. .... = Don't fragment: Not set
        ..0. .... = More fragments: Not set
    Fragment offset: 0
    Time to live: 128
    Protocol: UDP (17)
    Header checksum: 0x8244 [correct]
        [Good: True]
        [Bad: False]
    Source: 172.16.2.218 (172.16.2.218)
    Destination: 172.20.2.55 (172.20.2.55)
User Datagram Protocol, Src Port: 57459 (57459), Dst Port: radius-dynauth (3799)
    Source port: 57459 (57459)
    Destination port: radius-dynauth (3799)
    Length: 57
    Checksum: 0x6ec3 [validation disabled]
        [Good Checksum: False]
        [Bad Checksum: False]
Radius Protocol
    Code: CoA-Request (43)
    Packet identifier: 0x1 (1)
    Length: 49
    Authenticator: f8ce880960a402b9809f0c173c6c8530
    [The response to this request is in frame 2]
    Attribute Value Pairs
        AVP: l=10  t=Acct-Session-Id(44): 000000C3
            Acct-Session-Id: 000000C3
        AVP: l=19  t=Vendor-Specific(26) v=Cisco(9)
            VSA: l=13 t=Cisco-Policy-Down(38): POLICE-TEST
                Cisco-Policy-Down: POLICE-TEST
0000  00 1b 21 b3 18 58 2c 27 d7 af 82 b5 08 00 45 00   ..!..X,'......E.
0010  00 4d 5b 26 00 00 80 11 82 44 ac 10 02 da ac 14   .M[&.....D......
0020  02 37 e0 73 0e d7 00 39 6e c3 2b 01 00 31 f8 ce   .7.s...9n.+..1..
0030  88 09 60 a4 02 b9 80 9f 0c 17 3c 6c 85 30 2c 0a   ..`.......
0040  30 30 30 30 30 30 43 33 1a 13 00 00 00 09 26 0d   000000C3......&.
0050  50 4f 4c 49 43 45 2d 54 45 53 54                  POLICE-TEST
No.     Time                          Source                Destination           Protocol Info
      2 2000-01-01 08:46:03.259029000 172.20.2.55           172.16.2.218          RADIUS   CoA-NAK(45) (id=1, l=47)
Frame 2: 89 bytes on wire (712 bits), 89 bytes captured (712 bits)
    Arrival Time: Jan  1, 2000 08:46:03.259029000 Eastern Standard Time
    Epoch Time: 946734363.259029000 seconds
    [Time delta from previous captured frame: 0.001118000 seconds]
    [Time delta from previous displayed frame: 0.001118000 seconds]
    [Time since reference or first frame: 0.001118000 seconds]
    Frame Number: 2
    Frame Length: 89 bytes (712 bits)
    Capture Length: 89 bytes (712 bits)
    [Frame is marked: False]
    [Frame is ignored: False]
    [Protocols in frame: eth:ip:udp:radius]
    [Coloring Rule Name: UDP]
    [Coloring Rule String: udp]
Ethernet II, Src: IntelCor_b3:18:58 (00:1b:21:b3:18:58), Dst: HewlettP_af:82:b5 (2c:27:d7:af:82:b5)
    Destination: HewlettP_af:82:b5 (2c:27:d7:af:82:b5)
        Address: HewlettP_af:82:b5 (2c:27:d7:af:82:b5)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
        .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
    Source: IntelCor_b3:18:58 (00:1b:21:b3:18:58)
        Address: IntelCor_b3:18:58 (00:1b:21:b3:18:58)
        .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
        .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
    Type: IP (0x0800)
Internet Protocol, Src: 172.20.2.55 (172.20.2.55), Dst: 172.16.2.218 (172.16.2.218)
    Version: 4
    Header length: 20 bytes
    Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
        0000 00.. = Differentiated Services Codepoint: Default (0x00)
        .... ..0. = ECN-Capable Transport (ECT): 0
        .... ...0 = ECN-CE: 0
    Total Length: 75
    Identification: 0xe66e (58990)
    Flags: 0x00
        0... .... = Reserved bit: Not set
        .0.. .... = Don't fragment: Not set
        ..0. .... = More fragments: Not set
    Fragment offset: 0
    Time to live: 254
    Protocol: UDP (17)
    Header checksum: 0x78fd [correct]
        [Good: True]
        [Bad: False]
    Source: 172.20.2.55 (172.20.2.55)
    Destination: 172.16.2.218 (172.16.2.218)
User Datagram Protocol, Src Port: radius-dynauth (3799), Dst Port: 57459 (57459)
    Source port: radius-dynauth (3799)
    Destination port: 57459 (57459)
    Length: 55
    Checksum: 0xa044 [validation disabled]
        [Good Checksum: False]
        [Bad Checksum: False]
Radius Protocol
    Code: CoA-NAK (45)
    Packet identifier: 0x1 (1)
    Length: 47
    Authenticator: 8edb97b90c05e6ed7c1ce06688723520
    [This is a response to a request in frame 1]
    [Time from request: 0.001118000 seconds]
    Attribute Value Pairs
        AVP: l=21  t=Reply-Message(18): No Matching Session
            Reply-Message: No Matching Session
        AVP: l=6  t=Error-Cause(101): Session-Context-Not-Found(503)
            Error-Cause: Session-Context-Not-Found (503)
0000  2c 27 d7 af 82 b5 00 1b 21 b3 18 58 08 00 45 00   ,'......!..X..E.
0010  00 4b e6 6e 00 00 fe 11 78 fd ac 14 02 37 ac 10   .K.n....x....7..
0020  02 da 0e d7 e0 73 00 37 a0 44 2d 01 00 2f 8e db   .....s.7.D-../..
0030  97 b9 0c 05 e6 ed 7c 1c e0 66 88 72 35 20 12 15   ......|..f.r5 ..
0040  4e 6f 20 4d 61 74 63 68 69 6e 67 20 53 65 73 73   No Matching Sess
0050  69 6f 6e 65 06 00 00 01 f7                        ione.....
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.09.21 10:00:43 =~=~=~=~=~=~=~=~=~=~=~=
ABN-3845#
ABN-3845#sho run
Building configuration...
Current configuration : 2831 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ABN-3845
boot-start-marker
boot-end-marker
enable password ipdradm
aaa new-model
aaa authentication ppp default local group radius
aaa authentication ppp mounir group radius local
aaa authorization network default local group radius
aaa authorization network mounir group radius
aaa accounting update periodic 1
--More--        
aaa accounting exec mounir start-stop group radius
aaa accounting network default start-stop group radius
aaa accounting network mounir start-stop group radius
aaa server radius dynamic-author
client 172.16.2.183
client 172.20.2.234
client 172.20.2.204
client 172.16.2.218
server-key ipdradm
port 3799
auth-type session-key
aaa session-id common
dot11 syslog
ip cef
ip domain name a-bb.net
ip name-server 172.16.0.25
multilink bundle-name authenticated
--More--        
vpdn-group mounir
! Default L2TP VPDN group
accept-dialin
  protocol pppoe
  virtual-template 11
l2tp tunnel receive-window 1024
voice-card 0
no dspfarm
--More--        
archive
log config
  hidekeys
policy-map POLICE-TEST
class class-default
    police 48000 9000 18000 conform-action transmit  exceed-action drop  violate
-action drop
bba-group pppoe global
--More--        
virtual-template 11
interface Loopback0
ip address 172.29.1.5 255.255.255.255
interface GigabitEthernet0/0
ip address 172.20.2.55 255.255.255.0
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1
ip address 10.30.1.1 255.255.255.0
duplex auto
speed auto
media-type rj45
pppoe enable group global
interface GigabitEthernet0/1.1
encapsulation dot1Q 2
interface Virtual-Template11
--More--        
ip unnumbered GigabitEthernet0/1
ppp authentication pap mounir
ppp authorization mounir
ppp accounting mounir
interface Virtual-Template15
ip unnumbered Loopback0
no peer default ip address
ppp authentication pap mounir
ppp authorization mounir
ppp accounting mounir
router ospf 1
router-id 172.29.1.5
log-adjacency-changes
redistribute connected subnets
network 172.20.2.0 0.0.0.255 area 0
network 172.29.1.5 0.0.0.0 area 0
ip forward-protocol nd
no ip http server
--More--        
no ip http secure-server
logging 172.20.2.150
radius-server attribute 32 include-in-access-req
radius-server attribute 32 include-in-accounting-req
radius-server attribute 25 access-request include
radius-server attribute nas-port format d
radius-server host 172.20.2.204 auth-port 1812 acct-port 1813 key ipdradm
radius-server key ipdradm
radius-server vsa send cisco-nas-port
radius-server vsa send accounting
radius-server vsa send authentication
control-plane
--More--        
line con 0
line aux 0
line vty 0 4
password ipdradm
scheduler allocate 20000 1000
end
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#debug aaa coa
AAA CoA packet processing debugging is on
ABN-3845#debug radius
Radius protocol debugging is on
Radius protocol brief debugging is off
Radius protocol verbose debugging is off
Radius packet hex dump debugging is off
Radius packet protocol debugging is on
Radius elog debugging debugging is off
Radius packet retransmission debugging is off
Radius server fail-over debugging is off
Radius elog debugging debugging is off
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
*Sep 21 13:59:05.380: RADIUS/ENCODE(000000BA):Orig. component type = PPoE
*Sep 21 13:59:05.380: RADIUS/ENCODE(000000BA): Acct-session-id pre-pended with N
as Port = 0/0/1/1
*Sep 21 13:59:05.380: RADIUS(000000BA): Config NAS IP: 0.0.0.0
*Sep 21 13:59:05.380: RADIUS(000000BA): Config NAS IP: 0.0.0.0
*Sep 21 13:59:05.380: RADIUS(000000BA): sending
*Sep 21 13:59:05.380: RADIUS/ENCODE: Best Local IP-Address 172.20.2.55 for Radiu
s-Server 172.20.2.204
*Sep 21 13:59:05.380: RADIUS(000000BA): Send Accounting-Request to 172.20.2.204:
1813 id 1646/40, len 322
*Sep 21 13:59:05.380: RADIUS:  authenticator 65 F4 15 61 6F AD B1 76 - 45 35 D5
42 9A 3E 2F C7
*Sep 21 13:59:05.380: RADIUS:  Acct-Session-Id     [44]  18  "0/0/1/1_000000C3"
*Sep 21 13:59:05.380: RADIUS:  Vendor, Cisco       [26]  41 
*Sep 21 13:59:05.380: RADIUS:   Cisco AVpair       [1]   35  "client-mac-address
=f8d1.11a7.167a"
*Sep 21 13:59:05.380: RADIUS:  Framed-Protocol     [7]   6   PPP               
       [1]
*Sep 21 13:59:05.380: RADIUS:  Framed-IP-Address   [8]   6   10.30.1.2         
*Sep 21 13:59:05.380: RADIUS:  User-Name           [1]   9   "ipdradm"
*Sep 21 13:59:05.380: RADIUS:  Vendor, Cisco       [26]  35 
*Sep 21 13:59:05.380: RADIUS:   Cisco AVpair       [1]   29  "connect-progress=L
AN Ses Up"
*Sep 21 13:59:05.380: RADIUS:  Vendor, Cisco       [26]  31 
*Sep 21 13:59:05.380: RADIUS:   Cisco AVpair       [1]   25  "nas-tx-speed=10000
00000"
*Sep 21 13:59:05.380: RADIUS:  Vendor, Cisco       [26]  31 
*Sep 21 13:59:05.380: RADIUS:   Cisco AVpair       [1]   25  "nas-rx-speed=10000
00000"
*Sep 21 13:59:05.380: RADIUS:  Acct-Session-Time   [46]  6   143522            
*Sep 21 13:59:05.380: RADIUS:  Acct-Input-Octets   [42]  6   6382156           
*Sep 21 13:59:05.380: RADIUS:  Acct-Output-Octets  [43]  6   2559911           
*Sep 21 13:59:05.380: RADIUS:  Acct-Input-Packets  [47]  6   224941            
*Sep 21 13:59:05.380: RADIUS:  Acct-Output-Packets [48]  6   161500            
*Sep 21 13:59:05.380: RADIUS:  Acct-Authentic      [45]  6   RADIUS            
       [1]
*Sep 21 13:59:05.380: RADIUS:  Acct-Status-Type    [40]  6   Watchdog          
       [3]
*Sep 21 13:59:05.380: RADIUS:  NAS-Port-Type       [61]  6   Ethernet          
       [15]
*Sep 21 13:59:05.380: RADIUS:  Vendor, Cisco       [26]  15 
*Sep 21 13:59:05.380: RADIUS:   cisco-nas-port     [2]   9   "0/0/1/1"
*Sep 21 13:59:05.380: RADIUS:  NAS-Port            [5]   6   16777217          
*Sep 21 13:59:05.380: RADIUS:  NAS-Port-Id         [87]  9   "0/0/1/1"
*Sep 21 13:59:05.380: RADIUS:  Service-Type        [6]   6   Framed            
       [2]
*Sep 21 13:59:05.380: RADIUS:  NAS-IP-Address      [4]   6   172.20.2.55       
*Sep 21 13:59:05.380: RADIUS:  Unsupported         [151] 10 
*Sep 21 13:59:05.380: RADIUS:   44 36 34 41 36 36 31 33                        
[D64A6613]
*Sep 21 13:59:05.380: RADIUS:  Nas-Identifier      [32]  19  "ABN-3845.a-bb.net"
*Sep 21 13:59:05.380: RADIUS:  Acct-Delay-Time     [41]  6   0                 
*Sep 21 13:59:09.804: RADIUS: acct-timeout for 2DC0CAF4 now 5, acct-jitter -1, a
cct-delay-time (at 2DC0CC30) now 4
ABN-3845#
ABN-3845#
*Sep 21 13:59:32.708: RADIUS: COA  received from id 1 172.16.2.218:50186, CoA Re
quest, len 49
*Sep 21 13:59:32.708: COA: 172.16.2.218 request queued
*Sep 21 13:59:32.708:  ++++++ CoA Attribute List ++++++
*Sep 21 13:59:32.708: 65F0A840 0 00000009 string-session-id(337) 8 000000C3
*Sep 21 13:59:32.708: 670B2A10 0 00000009 sub-policy-Out(345) 11 POLICE-TEST
*Sep 21 13:59:32.708:
*Sep 21 13:59:32.708: COA: No matching entry found
*Sep 21 13:59:32.708: COA: Added Reply Message: No Matching Session
*Sep 21 13:59:32.708: COA: Added NACK Error Cause: Session Context Not Found
*Sep 21 13:59:32.708: COA: Sending NAK from port 3799 to 172.16.2.218/50186
*Sep 21 13:59:32.708: RADIUS:  18  21  4E6F204D61746368696E672053657373696F6E
*Sep 21 13:59:32.708: RADIUS:  101 6   000001F7
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
ABN-3845#
===================A

Similar Messages

  • HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

    Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

    Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

    Dear Community,
    Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
    The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
    Please, I really need your kind assistance. I am ernestly waiting for responses.

    Dear Tim,
    I saw your message. Below are the problems:
    Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
    1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
    2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
    The above is the challenges I am facing now.

  • I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps?

    I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
    1. I have jailed break my iphone and I never purchased any apps from itunes
    2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
    3. I am using window 7
    I sincerely hope you guys can help me.
    Regards,
    Stephen Hong

    alrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
    I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
    Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you!

  • How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation bcoz of earlier files

    How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help

    What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
    If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
    However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
    http://www.adobe.com/support/connect/connecthostedsupport.html

  • Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

    Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • Im a beginner in sense of using my ipad, Iphone 4s.   although i've had both for over a year. if i upgrade software version do i loose any of my music, video or contacts on any of my devices?

    Im a beginner in sense of using my ipad, Iphone 4s.   although i've had both for over a year. if i upgrade software version do i loose any of my music, video or contacts on any of my devices?

    You shouldn't lose anything at all under normal circumstances, but you should be proactive and backup your iPad with iCloud (if you use iCloud only) or if you use iTunes, transfer purchases, backup and sync before you update your device.
    iOS: How to update your iPhone, iPad, or iPod touch - Support - Apple

  • I just updated my ipad 1 to software version 4.3.3 I am not able to use any apps on my ipad. what do i do?

    I just update my ipad 1 to software version 4.3.3. I am not able to use any apps on my ipad now.  What do i do ??

    You could close all your apps on the taskbar and then try a reset.
    To close apps completely, from your homescreen double-click the home button to bring up the taskbar; press and hold one of the apps on the taskbar for a couple of seconds so that they start to shake; press the '-' symbol in the top left corner to close each app; touch any part of the screen above the taskbar so as to close the taskbar.
    To reset : press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't fix it then you could try restoring from your backup.

  • Synchronize my Address Book using desktop Software Version 6.0 with the BlackBerry 8900

     Everytime I try to Synchronize my Address Book with the BlackBerry 89000 using desktop Software Version 6.0 it crashes. I try doing task and calendar they work just fine, just on the address book it seems to crash anyone else has this problem? Desktop 6.0 phone software 5.0

    Hiya!
     Please be a little more specific.
    What do you mean by crashes? Does your entire system shut down? do you get any error codes?
    Thanks!
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • How to find Software version using a copy of software without installing

    How to find Software version using a copy of software without installing

    How to find Software version using a copy of software without installing
    See answer given by Ahmed
    Right click on setup file and select properties and then details tab.
    http://social.msdn.microsoft.com/forums/sqlserver/en-US/c5424ffa-ce98-4899-ac0d-97cbcac10029/how-to-get-versionbuild-from-sql-install-media
    You can also open Mediainfo.xml to see information from Installation file
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • To reinstall my current software version by using ...

    Frds, 
           I have nokia n95 and i just want to reinstall my current firmware software by using 'nokia software updater' software's latest version but it doesnt give any option to reinstall current software for phone.......help me so that i can reinstall the same phn software version.

    You can't reinstall current firmware version using Nokia Software Updater. You can install only new version if available.

  • Im using phone 3GS 32GB, my signal was very poor but whenever i insert my sim to other phone, there's no signal problem.. When i change position, the signal suddenly dropped. my software version now is 4.3.5.

    im using phone 3GS 32GB, my signal was very poor but whenever i insert my sim to other phone, there's no signal problem.. When i change position, the signal suddenly dropped. my software version now is 4.3.5.

    GoodReaderUSB originally worked by transferring files to a special location on a user’s iPhone, which iPhone’s GoodReader app was able to access. However, accessing this location was a violation of Apple’s iPhone SDK Agreement, because the app had to access files outside its own private storage space, which is forbidden by Apple.
    Because of this, your only choice to fix this. at this point, may be to restore your phone as a "new" device in itunes and NOT from backup. Follow this by syncing your content back to your phone. Unfortunately, ALL saved data on your phone will be lost.

Maybe you are looking for

  • Questions about discount and contract ect.

    I just realized that I can't see my military discount on My Verizon page. I am not sure if I am still getting discount though... Am i still getting discount? and another question is that I recently lost my cell phone... Also I am in Afghanistan so my

  • Plugging in an external hard drive to the time capsule

    Hi, I am a little confused by the discussion I have found on this topic. I am a recent PC to Mac person. I have a new MacBook Pro, a Time Capsule I recently bought and an iOmega external hard drive (houses ALL of my music). Is it possible to plug my

  • Since 10.0.9 FCPX crashes at "Import Media"

    Hi, it never happend before, the problem has shown up after i updated fcpx. I tried to import my footage, it´s from a panasonic hmc 151. 1080/50i, AVCHD. I never had a problem before. It was always the some work around. Open FCPX, insert SD-Card into

  • How do I sort music in iTunes when played from iPhone?

    Okay, so I've been using my iPhone to basically carry music around and play it on different computers, right?  Just turn on manual sync and then I can play music on iTunes straight from my music library without needing to have it in my computer's iTu

  • Webdynpro application taking MDM username and password from LDAP

    Hi All, I am working on EP-MDM integration. EP-LDAP , MDM-LDAP and EP-MDM have been integrated. The requirement is : When we run a webdynpro application from EP , it should take the user id and password of EP user who is currently logged in.(which is