Ram showing 2.7g and i have 4g can someone help?

Hello everyone first post here i am running 4 gigs of corsair dual channel pc10600/1333mhz and when i use can u run it utility it says i have 2.7gigs anyone have any ideas is that utility reliable? My Setup is MSi 790fx GD70 MB/ 955BE/ 4gb Corsair pc10600/1333mhz/ 2 Sapphire 1GB 4870's crossfired/ Ultra x3 1000watt psu/ CM V8 cpu cooler/ 150gb Veliociraptor hdd/ 1TB WD Mybook.

Please stop using chat language, thank you.
As for your problem, it's simple, when 32bit software is used there will only be:
4 Gigabyte addresses (is NOT the same as memory)
-BIOS = 3.7GB addresses left
-Videocards = 2.7 GB addresses left for memory to be used.
Only 64bit OS and 64bit software, must be both 64bit, can go above the 4GB addresses and remap devices.

Similar Messages

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

I have ipad 4 with ios7 and cannot take videos. can someone help please

i have ipad 4 with ios7 and cannot take videos. can someone help please

Try sliding the words left or right to select as opposed to tapping them.

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

I have a problem with my blackberry 9360, I bought it last 2months, and now when I use video camera or camera I saw a red and blue line. Can someone help me with this issue?

Hello zukafu,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

I have a Mac OS X 10.7 and want to be able to open Microsoft based WMV and MPG video. Can someone help me find a proper download?

I have a Mac OS X 10.7 and want to be able to open Microsoft based WMV and MPG video. Can someone help me find a proper download?

go out and gather together all players you can run on Lion:
MpegstreamClip, with QuickTime pro as the engine you can open and export just about anything.
Flip4Mac, buy it and you can convert and export to wmv. Usefull if you must have wmvs in PowerPoint.
Perian
VLC
Divx for Mac
Elgato h264 Turbo if you want to create h264 fast.

My ipad will not sync or back-up and thus cannot install OS5, it starts fine, but then says "cannot verify applications" and stops sync. Can someone help me?

my ipad will not sync or back-up and thus cannot install OS5, it starts fine, but then says "cannot verify applications" and stops sync. Can someone help me?

going to "transfer purchases' does work - however the thermometer bar at the bottom reflecting apps, music, video, book, etc cpapcity fraks out, sliding left to right maybe 4 or 5 times during the process. Have you ever seen this?
After it is finished, the SYNC button is not longer darkened - so I thought it was safe to attampt an upgrade to OS05... which i am doing now... takes maybe 20 mins and then I normally get the error "the applications on this ipad cannot be verified" and the bottom thermometer bar zeros out all by my music. The content and apps are all fine on teh ipad. so strange. I made an appointment with customer service tomrrow AM - but i do not think i should have to pay for this - i have never even used support before!
I will update if it works - or re[eats the strange pattern again and does not update.
Thanks for your time and help!

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Yeah..I washed my iPOD with my pants and now it died can someone help me?

So can someone help me restore it or should I start preparing for its funeral? lol but seriously please?
Windows XP

Here is some helpful things you can do with your washed ipod;
1. DO NOT PLUG IT INTO YOUR COMPUTER! (sorry for the caps but that is the mst important thing to do right away
2. place the ipod wityh the screen face down on a towel. and leave it alone for at least a week!!!! ...sorry another critical thing to do ASAP.
3. There is no availability for free repair from apple because it was dammaged by you and it is not a manufacturers defect. so it is not covered under the warranty. If you do the previous steps right away. adn leave it alone you might not have completeyl damaged the ipod. After a week if you cant seem to get any life from it then there is nothing you can do. If you wanna try to get it repaired with your own money ....google for possible repair services.
I thnk it would be easier to just buy a new ipod though because repair can be costly adn since you washed it you have damaged the circuitry adn everything!
Good luck
GFF

HT1386 My new iPad isn't showing as a device in iTunes. Can someone help please ?

Hi,
My new iPad isn't showing as a device in ITunes. Can someone tell me what I'm doing wrong please ?
Thanks

Have you got the latest version of iTunes on your computer ? There is some troubleshooting for a device not showing in iTunes on this page : http://support.apple.com/kb/TS1538

Adding Data into text and graphic frames - PLEASE CAN SOMEONE HELP?

Hello Script buddies,
Here is my script and I want to place data into the frames which I set up already in the inDesign template which loads correctly but unable to place the data into the frames, please refer to comments and if anyone can help me I will be very grateful.
strFile = "C:\Users\dean.brooks\Documents\PoolSigns.xlsx"
Set objExcel = CreateObject("Excel.Application")
objExcel.Workbooks.Open strFile
intRow = 2
Set objSheet = objExcel.ActiveWorkbook.WorkSheets(1)
' Cycle through cells in Pool Sign Schedule to retreive data
Do Until objSheet.Cells(intRow, 3).Value = ""
PoolSignScheduleSignNo = Trim(objSheet.Cells(intRow, 1).Value)
PoolSignScheduleTemplate = Trim(objSheet.Cells(intRow, 3).Value)
PoolSignScheduleDepth = Trim(objSheet.Cells(intRow, 5).Value)
PoolSignScheduleWarningFile = Trim(objSheet.Cells(intRow, 7).Value)
PoolSignScheduleWarningText = Trim(objSheet.Cells(intRow, 8).Value)
PoolSignScheduleRegFile = Trim(objSheet.Cells(intRow, 10).Value)
PoolSignScheduleRegText = Trim(objSheet.Cells(intRow, 11).Value)
' Open InDesign Template that corresponds to PoolSignScheduleTemplate
Set myInDesign = CreateObject("InDesign.Application.CS3")
Set myDocument = myInDesign.Open(PoolSignScheduleTemplate)
'Frames, these commands won't work, can someone please help??
Set DepthMarker = myDocument.Textframes.Item
DepthMarker.Contents = PoolSignScheduleDepth
Set WarningText = myDocument.Textframes.Item
WarningText.Contents = PoolSignScheduleWarningText
Set WarningSymbol = myDocument.Graphicframes.Item
WarningSymbol.Contents = PoolSignScheduleWarningFile
Set RegText = myDocument.Textframes.Item
RegText.Contents= PoolSignScheduleRegText
' Save InDesign File to C:\ to be moved manually later to appropriate location
myDocument.Save("C:\Pools\PoolSign\PoolSignScheduleSignNo.indd")
myDocument.Close
intRow = intRow + 1
Loop
objExcel.Quit
WScript.Quit

Hi Robert,
Your problem starts here:
Set DepthMarker = myDocument.Textframes.Item
...which item? Item takes either an integer (the index of the item) or a string (the contents of the label property, if any).
Next, however, is that you should be more specific about *where* the text frame is in the document. What page or spread is it on? Let's say that the frame "DepthMarker" is on page 1:
Set DepthMarker = myDocument.Pages.Item(1).TextFrames.Item(1)
If there's only one frame on that page, you're in great shape. If not, you need to come up with some way to differentiate one frame from another. Script labels are a great way to do this. Let's say you've used the Script Label panel to add the label "DepthMarker" to the relevant frame on page 1, and added the label "WarningText" to another frame. In that case, you'd use something like this:
Set DepthMarker = myDocument.Pages.Item(1).TextFrames.Item("DepthMarker")(0)
Set WarningText = myDocument.Pages.Item(1).TextFrames.Item("WarningText")(0)
...When you use a string to refer to a page item by its label, InDesign returns an array, so you need to get the first item in the array (assuming that there's only one page item on the page with that label).
Hope this makes sense! I'm typing it off the top of my head because I have to go speak at a conference tomorrow and am short on time--but it should get you pointed in the right direction.
Thanks,
Ole

Error message 7 and 6034. Have uninstalled and reinstalled iTunes 7 times and errors continue. Can someone help please? Been working on this for 4 hours.

Itunes updated on my pc and laptop and now I cannot open the program on either one. Running Windows 7 on both. Error number 7 and R6034 continue to pop up. I have uninstalled (6 times) all of the Apple programs, rebooted, reinstalled, etc. as badgerfan1101 posted but cannot open it on either computer. I even did a restore to an earlier date with hopes that would solve the problem. Any other ideas? Been working on this for 4 hours

Hey gardenqueen1,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Okay Im thinking I made a mistake, I purchased and ipad 2 and now don't know what to do with it. I turned it on and it won't do anything but show the plug and itune symbol? Can someone tell me what to do?

I don't know what to do with my ipad2?

I'm guessing you did not buy the iPad from Apple. If you did not buy it from Apple, it may very well have an older software version. Only iOS 5 or later is PC independent. If you have an earlier version, a computer with iTunes loaded is required.
 Merry Christmas

Trying to download itunes and its not working, can someone help plz??

I am trying to download itunes to my computer, and everything seemed to be loading ok, but then when I get to the terms&conditions and I try to hit agree, nothing happens, it's as if I can not even click it, does anyone have any idea on what i can do? Thanks
hewlet packard Windows XP

hi April!
just doublechecking something. is the download hanging at the initial phase of proceedings? or is this happening after the installation has actually pretty much completed?
if it's at the later stage of proceedings, are you getting a sort of "brief flash of a license screen? or is something else a little different happening?
love, b

Can not set up iMessage and face time. I get third message whenever I try to sign in. "Please check your network connection and try again ". Can someone help me. I'm very frustrated.

Having a problem setting up face time and iMessage o iPad. . Keep getting message "could not sign in. Please check your network connection and try again". Please help

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Ram showing 2.7g and i have 4g can someone help?

Similar Messages

Maybe you are looking for