Random Numbers in JSSE - Please Help

I am pulling what little hair I have out trying to figure out this problem, please help if you can - How can I programmatically retrieve at runtime the client and server nonces used to negotiate a SSL socket in JSSE?
Regards,
Bart

Sorry - I wasn't very specific in my post I guess - I realize that you can output the nonces, etc. by running the debugger - but, I am hoping to use the nonces at runtime in the code. Thus, it is not so much that I can figure out what nonces were used to negotiate an SSL session, but that my program can use them to perform another task. Any idea how to get these values programmatically?
Thanks,
Tore

Similar Messages

I have an ipod 2g , The keyboard won't work! Or at least some of it's letters and numbers won't. please help i'm stuck with emojis

i have an ippd touch 2g , a part of my keyboard won't work , i can type letters but i can't type numbers . please help i'm stuck with emojis keyboard

Try restarting the iPod by holding down the lock and home button together and then slide the power button to turn it off and then wait 10 seconds and start it up again. If it is not a reset issue then it may be a hardware issue. Is your iPod damaged or have you dropped it recently? If it is a hardware problem then you may not be able to fix it. If your iPod has multitasking options like the new iOS devices, close out the app and then try again, it should reset your device to letters instead of emojis.

Someone please help me!!! updated my Mac Pro and random folders deleted.. please help!

Please help me. I have osx 10.9.2. and very important folders just disappeared. Tryed installing recovery software, I'm NOT logged in as diff user (only my computer). Please help me. Apple said I unfortunately dont have phone support? but I think with their update I should get a little help. I hate apple so bad after this.. No problems with my computer ever until this bs. Please help me.

macisgr8 wrote:
I disagree, hard drives are a mechanical moving device- heating and cooling, facing power surges. I've installed many versions of Mavericks but never had a problem but I am willing to spend an extra 5 minutes cleaning up the hard drive.
How many versions of Mavericks has there been? I have installed one. The only one I have ever seen. Then updated it twice. And never used Crapware like YASU or CleanMyMac or MacKeeper etc etc and have never had an issue. And i certainly would never recommend a program that even the developers say
"In the testing I’ve done using Yasu on Mavericks, it has performed well, so I believe it’s okay to use Yasu on Mac OS 10.9.x. Of course, I have to provide the disclaimer that I can’t guarantee 100% compatibility… If you decide to use Yasu on Mavericks, you’re doing it at your own risk."
Pete

2011 MBP randomly shutting down. Please Help.

Please help, my computer has shut down twice and restarted with the message "your computer restarted because of a problem..."
This is the error report that came up with restart.
Interval Since Last Panic Report: 26859 sec
Panics Since Last Report:          1
Anonymous UUID:                    B3726706-FAD6-5761-4D6B-A1D89B3F7762
Fri Nov 23 14:09:11 2012
panic(cpu 7 caller 0xffffff80278b7bd5): Kernel trap at 0xffffff7fa9e808c1, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007ff922011888, CR3: 0x000000000cb5d02e, CR4: 0x00000000000606e0
RAX: 0xdeadbeefdeadbeef, RBX: 0xffffff80375ffce0, RCX: 0xffffff80341e5208, RDX: 0xffffff803676eaa8
RSP: 0xffffff80a7503cb0, RBP: 0xffffff80a7503cd0, RSI: 0x0000000080000000, RDI: 0xffffff80355d82c0
R8: 0x0000000000000000, R9: 0xffffff809b794708, R10: 0xffffff8092f7e001, R11: 0x0000000000000001
R12: 0xffffff8037294740, R13: 0xffffff80930a2000, R14: 0xffffff80355d82c0, R15: 0x0000000001c73000
RFL: 0x0000000000010286, RIP: 0xffffff7fa9e808c1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007ff922011888, Error code: 0x0000000000000000, Fault CPU: 0x7
Backtrace (CPU 7), Frame : Return Address
0xffffff80a7503950 : 0xffffff802781d626
0xffffff80a75039c0 : 0xffffff80278b7bd5
0xffffff80a7503b90 : 0xffffff80278ce4ed
0xffffff80a7503bb0 : 0xffffff7fa9e808c1
0xffffff80a7503cd0 : 0xffffff7fa9ef9715
0xffffff80a7503d20 : 0xffffff7fa9e6943a
0xffffff80a7503d50 : 0xffffff7fa9e7a81f
0xffffff80a7503d80 : 0xffffff7fa9e7a7db
0xffffff80a7503da0 : 0xffffff7fa9e76441
0xffffff80a7503dd0 : 0xffffff7fa9ec28cd
0xffffff80a7503df0 : 0xffffff7fa9e74cb0
0xffffff80a7503e20 : 0xffffff7fa9e74d27
0xffffff80a7503e40 : 0xffffff8027c64195
0xffffff80a7503e60 : 0xffffff8027894496
0xffffff80a7503e80 : 0xffffff8027820aed
0xffffff80a7503eb0 : 0xffffff8027810448
0xffffff80a7503f00 : 0xffffff802781961b
0xffffff80a7503f70 : 0xffffff80278a5b16
0xffffff80a7503fb0 : 0xffffff80278ced53
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily(19.0.26)[7DC411F1-A646-3A4A-B160-A1492F5EC0 ED]@0xffffff7fa9e5d000->0xffffff7fa9ea3fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7fa7eaf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7fa840c000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7fa83c9000
         com.apple.AMDRadeonAccelerator(1.0)[D89E4100-9C89-3C99-B34B-F7790E1A0B8B]@0xfff fff7fa9eaf000->0xffffff7faa27cfff
            dependency: com.apple.iokit.IOAcceleratorFamily(19.0.26)[7DC411F1-A646-3A4A-B160-A1492F5EC0 ED]@0xffffff7fa9e5d000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7fa7eaf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7fa840c000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7fa83c9000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000027600000
Kernel text base: 0xffffff8027800000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 11317598473069
last loaded kext at 9635222601254: com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1 (addr 0xffffff7faa43b000, size 86016)
last unloaded kext at 11239869890132: com.apple.iokit.IOUSBMassStorageClass    3.5.0 (addr 0xffffff7faa42a000, size 69632)
loaded kexts:
com.apple.filesystems.afpfs    10.0
com.apple.nke.asp_tcp    7.0.0
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.iokit.IOBluetoothSerialManager    4.0.9f33
com.apple.driver.AGPM    100.12.69
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleHDA    2.3.1f2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.driver.AppleMikeyDriver    2.3.1f2
com.apple.driver.AppleMuxControl    3.2.11
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleSMCLMU    2.0.2d0
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.kext.AMDFramebuffer    8.0.0
com.apple.AMDRadeonAccelerator    1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.driver.AppleIntelHD3000Graphics    8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    8.0.0
com.apple.driver.ApplePolicyControl    3.2.11
com.apple.driver.AppleUSBTCButtons    235.4
com.apple.driver.AppleUSBTCKeyboard    235.4
com.apple.driver.AppleIRController    320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AirPort.Brcm4331    602.15.22
com.apple.driver.AppleSDXC    1.2.2
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.security.SecureRemotePassword    1.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.3.1f2
com.apple.iokit.IOAudioFamily    1.8.9fc10
com.apple.kext.OSvKernDSPLib    1.6
com.apple.iokit.IOSurface    86.0.3
com.apple.iokit.IOBluetoothFamily    4.0.9f33
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.IOPlatformPluginFamily    5.2.0d16
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IOAcceleratorFamily    19.0.26
com.apple.kext.AMD6000Controller    8.0.0
com.apple.kext.AMDSupport    8.0.0
com.apple.driver.AppleHDAController    2.3.1f2
com.apple.iokit.IOHDAFamily    2.3.1f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.2.11
com.apple.iokit.IONDRVSupport    2.3.5
com.apple.iokit.IOGraphicsFamily    2.3.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.driver.AppleUSBMultitouch    235.7
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.1.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0

I have the same pb with my MBP 2011
Interval Since Last Panic Report: 254171 sec
Panics Since Last Report:          1
Anonymous UUID:                    8C0021E8-2672-33D0-2C51-857FF5D83CF4
Sun Nov 25 18:01:27 2012
panic(cpu 0 caller 0xffffff8007cbff3e): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/acpi.c:182
Backtrace (CPU 0), Frame : Return Address
0xffffff8087a1bc70 : 0xffffff8007c1d626
0xffffff8087a1bce0 : 0xffffff8007cbff3e
0xffffff8087a1bd40 : 0xffffff7f899ee053
0xffffff8087a1bd70 : 0xffffff7f899f14ea
0xffffff8087a1bd90 : 0xffffff800805a97e
0xffffff8087a1bde0 : 0xffffff8008075d32
0xffffff8087a1be20 : 0xffffff800803c36e
0xffffff8087a1be60 : 0xffffff8008036962
0xffffff8087a1beb0 : 0xffffff80080403f4
0xffffff8087a1bef0 : 0xffffff80080404cf
0xffffff8087a1bf30 : 0xffffff8008045daa
0xffffff8087a1bf80 : 0xffffff8008045ed9
0xffffff8087a1bfb0 : 0xffffff8007cb26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(1.6)[4F08531B-7E5A-3604-924A-8769CF53458B]@0 xffffff7f899e4000->0xffffff7f89a3afff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f881f2000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f882af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 1281247811672
last loaded kext at 203196072277: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f89f9b000, size 229376)
last unloaded kext at 146106514290: org.tgwbd.driver.ElliottForceLegacyRTC          1 (addr 0xffffff7f88d86000, size 8192)
loaded kexts:
org.tgwbd.driver.NullCPUPowerManagement          1.0.0d2
es.osx86.driver.EvOreboot          1.0.3
com.apple.filesystems.smbfs          1.8
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.1.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.4 GHz, 4 GB, SMC 1.69f3
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD HTS547575A9E384, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: USB Optical Mouse, 0x0461 (Primax Electronics), 0x4d81, 0xfa130000 / 6
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

Random crashes everyday. Please help... I cant take it anymore!

Help Please!
I have been getting random crashes for months now and it's driving me crazy. This happens randomly every day a few times a day. I get the hard crash screen with the instructions to hit the button to reboot. Its the grey square screen over the faded background with a square that has different languages. I have gotten this crash even when the computer was sleeping or not doing anything processor intensive. I am not sure what to do????
Here is the Report: Any help is much appreciated as I can't deal with having to restart my computer and loose work a few times every day:
Wed May 20 11:13:09 2009
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000000 PC=0x00000000000AC24C
Latest crash info for cpu 0:
Exception state (sv=0x656f0000)
PC=0x000AC24C; MSR=0x00001030; DAR=0x00000000; DSISR=0x42000000; LR=0x000421A0; R1=0x5B0CFD40; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00042194 0x0003FA44 0x000B0E54
Proceeding back via exception chain:
Exception state (sv=0x656f0000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x655d0280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: Unknown
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:39:01 PST 2008; root:xnu-1228.9.59~1/RELEASE_PPC
System model name: PowerMac11,2
panic(cpu 1 caller 0xFFFF0003): simple lock (0x00455224) deadlock detection, pc=0x0003FE40
Latest stack backtrace for cpu 1:
Backtrace:
0x0009BCF0 0x0009C694 0x00029EA0 0x000AC1A8 0x0003FE40 0x0003447C 0x00037654 0x0003784C
0x00040D70 0x000BA8D4 0x000B5424 0x000B3938
Proceeding back via exception chain:
Exception state (sv=0x655ca000)
PC=0x000B6F5C; MSR=0x00009000; DAR=0x1C6A0000; DSISR=0x42000000; LR=0x000358B8; R1=0x5B0E7CE0; XCP=0x00000024 (0x900 - Decrementer)
Backtrace:
0x00035894 0x00036104 0x00036C3C 0x0003FA60 0x000B0E54
Exception state (sv=0x65687a00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Here is the system configuration:
Model: PowerMac11,2, BootROM 5.2.7f1, 2 processors, PowerPC G5 (1.1), 2.3 GHz, 6.5 GB
Graphics: kHW_NVidiaGeForce6600Item, GeForce 6600, spdisplayspciedevice, 256 MB
Memory Module: DIMM0/J6700, 256 MB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM1/J6800, 256 MB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM2/J6900, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM3/J7000, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM4/J7100, 2 GB, DDR2 SDRAM, PC2-3200U-288
Memory Module: DIMM5/J7200, 2 GB, DDR2 SDRAM, PC2-3200U-288
Network Service: Built-in Ethernet 1, Ethernet, en0
PCI Card: GeForce 6600, display, SLOT-1
PCI Card: Apple 5714, network, GIGE
PCI Card: Apple 5714, network, GIGE
Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
Parallel ATA Device: PIONEER DVD-RW DVR-110D
USB Device: hub_device, (null) mA
USB Device: Hub in Apple Extended USB Keyboard, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Apple Extended USB Keyboard, (null) mA
USB Device: Apple Cinema HD Display, (null) mA
USB Device: iPhone, (null) mA
USB Device: hub_device, (null) mA
USB Device: PTZ-630, (null) mA
FireWire Device: iSight, Apple Computer, Inc., 200mbit_speed
FireWire Device: My Book, WD, 400mbit_speed
FireWire Device: unknown_device, unknown_value, unknown_speed
FireWire Device: unknown_device, unknown_value, unknown_speed

You may be experiencing a Kernel Panic as seen and described in Apple doc.#106227. If not, disregard.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here's a great MacFixIt article.
 Good Luck! DALE

Random numbers... need help.

Hi guy´s,
first of all, I am a total noob when it comes to expressions and coding all together but from what I can reed is that I need it to get this to work. And as with many things my ambition is way ahead of my current skills.
Here is the thing, I have made a motion timelapse of windmills which is shot over 12 hours. Now the whole film pans from left to right (sunset to sunrise) going from one windmill to the other, 6 in all. I want to animate a text with some technical readout, like windspeed, the windmills output in watts and some technical mombo jombo like Hz and Volt. All to make it more technical in its expression. The txt is then motion tracked to each windmill so it will follow it throughout the pan and also I have transformed it in 3D so it kinda is aligned to each windmill based on its position in the frame.
right now i have txt like:
wind: 08m/s
output: 650kw
data: 40Hz 660v
But i want the numbers to toggle quite fast, like have windspeed info to toggle between 08 and 13 m/s, so it looks like a constant live readout from some datarecording, and have the Kw readout to do the same and so on... so everything is constantly toggeling within a given value. I have tried different methods but no luck... if i highlight like say 08 in "wind" and ask for random(minValOrArray,maxValOrArray) and put in 08, 13, I then can se the value change in my inspector but the highlighted field in my viewer is now empty.
can anybody give my a recipe for how to easally make this possible..
keep in min that I am new to this so please keep the technical gibberish as simple as possible
here is a screen dump of what i am fighting.

How about just using sliders and wiggle(). For example, setting a slider to 10.5 and applying this: wiggle(5,2.5) will give you a range from 8 to 13. Then just link your readouts to the sliders.
Dan

Adding binary numbers in java please help!!

Hello all, im a total newbie to java and i need your help urgently, i have two variables
that are integers, that store binary numbers i.e.
int tmpIntOne, tmpIntTwo;
tmpIntOne = 1010;
tmpIntTwo = 1110;
i want to add these numbers together and return a binary result so far when you add them together you get:
2120
however i would like a binary result so that
result = tmpIntOne + tmpIntTwo;
= 11000
Thank you.

Hello all, im a total newbie to java and i need your
help urgently, i have two variables
that are integers, that store binary numbers i.e.
int tmpIntOne, tmpIntTwo;
tmpIntOne = 1010;
tmpIntTwo = 1110;These are not binary numbers. These are decimal numbers whose digits consist of ones and zeros. If you want to interpret the characters "010" as a binary number, then do
int tmp1 = Integer.parseInt("1010", 2);
etc.
i want to add these numbers together
int result = tmp1 + tmp;
and return a
binary result Adding two ints will give an int. Int's are always binary. If you want to display it as a binary String, as opposed to the usual decimal String, then, as suggested, use toBinaryString.

My internet randomly stopped working? Please help mee!

Right okay, I got my BB last month some time, and it's been perfect.
But today i came into sixthform and my internet won't work.. and at first i thought it was because i was in school, but i always just browsed whilst i was a school and everyone elses is still working.
I can't get on blackberry messenger..
and i'm on a laptop with wireless internet so i know there isn't anything wrong with the internet itself.
I just went on the browser and tried to go on google and i got this message "Unable to connect to the internet, please try again later. If the problem persists please contact your service provider."
I have the facebook application too, and that isn't working either..
Any ideas?
I will really appreciate it x

1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site.
From your handheld device: http://www.blackberry.com/btsc/KB15402
From your desktop PC: http://www.blackberry.com/btsc/KB02830
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4993 iPhone makes random Keytone during call ~ Please help

I thought it was just my phone, but I decided to look up this random keytone during phone calls on the internet and found this is a common problem with iPhones. I have a iPhone 5s and this has been happening since I purchased it in Nov 13.
I cannot believe there is not a fix for this very annoying problem.
Please let me know if there is a solution I just have not come across yet.
Thank you.

The keytone noise is random during phone calls. My cell carrier is Sprint and my internet provider is AT&T. However, after reading about 100 post today on differt blogs it does not seem to be an issue with a carrier or a internet provider.
What I have been reading is that it happen after doing updates on the iPhones. Mine happen to start as soon as I opened and used my new iPhone 5s. It is so annoying and I have read enough about the issue today to know that there are 100s out there if not 1000s with the same issue. Different carriers, different internet providers, but all the same type of phones iPhones 4s and 5s after doing updates.
Since it is a known problem I was hoping someone at Apple would be able to tell me if it can't be fixed that at least they are working on a fix.

Trying to create a drop down menu in numbers...please help

Hi
Can anyone indicate how to go about creating a drop-down menu.
Thanks in advance

Hi Meela,
Welcome to Apple Discussions and the Numbers 08 forum.
Check page 66 of the Numbers User Guide supplied with your copy of iWork. The guide refers to them as "pop-up" menus, so a search using "pop-up" will be more successful than one using "drop down".
Essentially the process is:
Click on the cell to select it.
Open the Inspector and choose Cell Format (icon is a cell containing 42)
Click the Cell Format menu and select Pop-up Menu from the bottom of the list.
Double click an item in the list to edit it. Click the + button to add an item, the - button to delete the selected item.
Done.
Regards,
Barry

Has anyone got this? whenever i load a page it has a message that randomly just says 2. please help this is really annoying.

like it says thats what happens. I load a page and i get a message saying "2" its annoying because i have to press okay to contuie. plz help.

This is caused by the InternetEngine - Powering Applications! extension. If you uninstall that extension it should stop this happening.
https://support.mozilla.com/kb/Uninstalling+add-ons

Serial numbers and security - PLEASE help!

A potential buyer is asking for a serial number, should I give it to them? What information can you look up with this?

Only information about the device. See for yourself: Decode Mac Serial Number. The buyer is verifying it is not a fake. You should follow this guideline for selling it: What to do before selling or giving away your iPhone, iPad, or iPod touch.

CAN ANYBODY PLEASE HELP ME???

Okay, I'm in this AP Computer Science class where I don't understand ANYTHING and my mom won't take me out of it because she thinks "it will help me in the future"(even though I'm going to be a doctor). So can somebody please help me write a program that simulates a slot machine that outputs three random numbers?? Please and Thank You.

Why are you using the Scanner? I didn't see anything in your reqiurements about reading user input.
I see you imported Random, so you know it exists. Did you read its docs?
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
If you don't know the basics of writing a program in Java in general, you'll probably want to look at one or more of these.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

Please help me on my Android game

I am trying to develop a android runner game for school purposes.. I am still new to this and please I need your assistance..
You guys can view my CS5flash file at >>> http://www.filedropper.com/test_37
The obstacles and coins are on random. But the obstacles and coins are overlapping each other.. Which is very bad for a runner game because it looks very bad and the gameplay gets very very complicated.
How can i fix it??. Is there any way to fix it?.
And i am also thinking if I can set the obstacles and coins to a specific area (not on random). So the game will be more oganized and the gameplay won't be complicated. Which i still don't know -_-.
But i still prefer it on random. So guys please help me fix it..

I inputed this random range
function randomRange2(minNum:Number, maxNum:Number):Number
return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum);
But still the coins/obstacles are overlapping each other. Please help me sir!
The deadline is very near already. Please sir .
Also the game is running slow when I tried it on the android phone. How can i fix it?
Help please

My G5 PPC is acting really dumb Please Help!

Ok guys here is my problem for about 3mo ive been having issues with my PPC freezing after about 15min-1hr of use does really matter what im doing from surfing the web to copying files to my HDD even while using Logic. The computer freezes but the mouse arrow is visible and moveable i can hear the computer running but sometimes i get the beachball icon rotating for ever until i re-start the computer. I just recently replaced the main hard drive from a 250gb maxtor to a 1tb black caviar and no luck it still freezes randomly. can you guys please help me out i dont want to spends hundreds on a simple repair...

Hi SaintPrado, and welcome to the forums!
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
http://www.macupdate.com/info.php/id/15667
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.
Also, Get Temperature Monitor - 4.51 to see if it's heat related...
http://www.versiontracker.com/dyn/moreinfo/macosx/19994

Random Numbers in JSSE - Please Help

Similar Messages

Maybe you are looking for