Rapidwiz error

Help please :
I run rapidwiz thus: ./rapidwiz
and I get some errors starting with the one:
Preparing to start up Rapid Install...
cp: cannot stat '/opt/oracle/startCD/disk1/rapidwiz/jre/Linux' : No such file or directory
cp: cannot stat '/opt/oracle/startCD/disk1/rapidwiz/lib/Linux' : No such file or directory
cp: cannot stat '/opt/oracle/startCD/disk1/rapidwiz/unzip/Linux' : No such file or directory
Rapid Install Wizard will now launch the Java Interface ............
./rapidwiz: line 518: /tmp/RapidInstall/bin/runWizard.sh: No such file or directory
Can you give me some light on this. under the disk1/rapidwiz/bin, what I can only find is runwizar.sh

Thanks Fadi,
I have already tried to grep rapidwiz but nothing like that.
Let me just explain something here if someone will be able to help:
When I first installed SLES 9 and start rapidwiz, everything went fine until I got to around the 5th or 6th dvd and I was getting some errors.
I then decided to reinstall SLES 9 and stage all the dvds with the stage script from metalink. But that was giving some errors, so I decided to stage the dvds manually by copying them to the locations as the perl script would have done.
Now I can not start rapidwiz from the staged StartCD.
I can only think that the perl script for staging is causing this problem since I can run the rapidwiz from dvd but not from stage area.
Your opinion is highly appreciated pls

Similar Messages

R12 Rapidwiz Error

Hi Hussein,
I am using RHEL 5.3 for R12.1.1.1 Installation
This is Ajaz Ahmed. Thanks for your timely help. I was using this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
for Linux (32-bit) [ID 402310.1] to Install R 12.1.1.1. as per your reply and the recommended document I
Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).. I started to install. Prior to that I completed
all the pre-requisites. When running ./rapidwiz from the Stage12/startCD/Disk1/rapidwiz folder as a root user I get the following error.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /mnt/hgfs/Stage12/startCD/Disk1/rapidwiz/jre/Linux/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.load0(Unknown Source)
at java.lang.System.load(Unknown Source)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I am not able to proceed further. What can be the issue this time.
Best Regards
Ajaz Apps
Ajaz Ahmed
9967890118
Mumbai
e-mail : [email protected]
[email protected]

Hi Hussein,
Earlier I was Installing with this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
for Linux (32-bit) [ID 402310.1]. Error Rectified.
As per your suggestion I installed the R 12.1.1.1. using Red Het Entp. Linux 5.3 using the recommended document
Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
As per Note: 761564.1 document also I got the same error
The installation is completed after all the 5 steps. During the post install task
For the system checks there were errors in
RHEL 5.3 Errors
1) HTTP
checking URL = http://r12vis.apps12.com:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2) Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3) Login Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
4) Help Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5) JSP
checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding
From the other terminal window I stopped and restarted all the appstier services.
There after during the retry option of installation for system checks only two errors
Remained which are
1) JSP
checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding, waiting 15 seconds and retesting.
JSP is not responding
2) Login Page
checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
When I click next button I get the following message
RW-10001 – RapidWizard Install had detected that your configuration has errors
You must resolves these issues before continuing
As no other alternative left I press the cancel button.
After bouncing the linux service I started the DB Tier and Apps tier, but again I face the same problem of JSP and Login Page.
I logged on to application as applmgr and thru the path
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/bin
I run the ./opmnctl status command which gave me the error
Unable to connect to opmn.
Opmn may not be up.
So I started the services using
./opmnctl startall
opmnctl: starting opmn and all managed processes...
GETHOSTBYNAME(ap6004bld.us.oracle.com): 2
================================================================================
opmn id=r12vis.apps.com:6001
0 of 3 processes started.
ias-instance id=APPS_C_HOME.ap6004bld.us.oracle.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=7473)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=7472)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=7466)
failed to start a managed process after the maximum retry limit
Log:
/d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCacheAdmin~1
After that I stopped the Apps tier. Logged in sys ‘as/sysdba’ and unlocked the apps account.
Started the Apps tier. But again I was not able to login.
After that I stopped the Apps tier, keeping the DB Tier ip. And run the Autoconfig from Apps Tier path /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/scripts
sh adautocfg.sh
I get the error as AutoConfig completed with errors.
/d02/oas/oracle/OASDB/db/tech_st/10.2.0/appsutil/log/OASDB_testappsdb/06300116/adconfig.log
Enter the APPS user password:
The log file for this session is located at: /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/log/06300418/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using CONFIG_HOME location : /d01/oracle/VIS/inst/apps/VIS_r12vis
Classpath : /d01/oracle/VIS/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/VIS/apps/apps_st/comn/java/classes
Using Context file : /d01/oracle/VIS/inst/apps/VIS_r12vis/appl/admin/VIS_r12vis.xml
Context Value Management will now update the Context file
Updating Context file...COMPLETED
Attempting upload of Context file and templates to database...COMPLETED
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring MSC_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
The E-Business Home Page is located at http://r12vis.apps.com:8000/OA_HTML/AppsLogin
If your browser doesn't automatically redirect to its new location, click here.
what can be the other possibility ? shall I try with Red Hat Entp. Linux 4 (32-Bit) ?
If you have some other documents please send me on my mail-id's.
Regards
Ajaz Ahmed
9967890118
Mumbai
e-mail : [email protected]
[email protected]

11i rapidwiz error for missing vision.drv driver file during installation.

I am trying to install 11i (11.5.10) on OEL4 32-Bit.
Uisng "Express Install"option to configure VISION databsae.
Rapidwiz failed with following error stating AC-00401 missing vision.drv
Checking Disk contents in - /ebsstage/startCD/Disk1/rapidwiz
Checking Disk contents in - /ebsstage/oraAppDB/Disk1
Checking Disk contents in - /ebsstage/oraAppDB/Disk1
AC-00401: Driver file missing for disk: 1 in the location: /ebsstage/oraAppDB/Disk1/data/driver/vision.drv
I have only tow following drivers files present in that folder, But there is no vision.drv present.
./data/driver/Disk1.drv
./data/driver/prod.drv
Where is the vision.drv?
Thanks,

Hi,
MD5 checksum from md5sum_Linux as provided by Oracle for Disk1:
5efa65008610d985ea58bd592006ef38 oraAppDB/Disk1/data/stage/data_dat219.zip
4a7b0cf91bab8296f4ca122a857848b9 oraAppDB/Disk1/data/stage/data_log50.zip
eb174a20e2a86c435fed40f4f5a12aaa oraAppDB/Disk1/data/stage/data_log48.zip
5f9e42dfa53e9338645821a430d69b29 oraAppDB/Disk1/data/stage/data_dat220.zip
c4a3aa6fd0ccb6790c67308723cfbfee oraAppDB/Disk1/data/stage/data_log49.zip
72b0172ae6039fd49b0ac852b0758e0e oraAppDB/Disk1/data/stage/data_sys52.zip
1c23c2e9bcc871edce6e72f0f4047e64 oraAppDB/Disk1/data/stage/data_dat133.zip
065d44afeffe1036e19d6065236859d8 oraAppDB/Disk1/data/stage/data_dat132.zip
70f6c2a1c20ba2ffdc27ea6ac4cbd42c oraAppDB/Disk1/data/stage/data_dat146.zip
c8cba08eca0587ff5bdb995d6825c29b oraAppDB/Disk1/data/driver/Disk1.drv
b928aa352358d54cc4a5b5882e4470a0 oraAppDB/Disk1/data/driver/vision.drv
c6fcf9200b77931a9eeb97a1a09619cf oraAppDB/Disk1/data/driver/prod.drv
d7194a1cb606570d46b8285798a10670 oraAppDB/Disk1/disk.label
Follwing is th output of my staging area for Disk1 which is different from Oracle:
[oracle@ebs11i40:/ebsstage/oraAppDB/Disk1]$ find . -type f -print
./data/stage/data_dat127.zip
./data/stage/data_sys42.zip
./data/stage/data_sys51.zip
./data/stage/data_sys41.zip
./data/stage/data_dat216.zip
./data/stage/data_dat220.zip
./data/stage/data_dat28.zip
./data/stage/data_dat22.zip
./data/driver/Disk1.drv
./data/driver/prod.drv
./disk.label
Thanks.

Oracle 11i Rapidwiz Error on RHEL5

Hi DBAs,
I am trying to install the Oracle 11.5.10.2 on Linux RHEL5.3 on a 32 bit Plateform. I am getting the error as I run the rapidwiz as 'Oracle User'.
$./rapidwiz
Rapid Install Wizad is validating your file system ......
Rapid Insatll Wizad will now launch the Java Interface......
oracle@localhost]$/R11/install/startCD/Disk1/rapidwiz/jre/Linux/1.4.2/bin/jre:error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or direcorty
Please provide your comments and suggestion.
Thanks
-Samar

Hi
It does sound like a pathing error. You need to check the path very carefully and a) make sure that the files it is looking for are contained in one of the folders in the path, and B-) that the correct versions are the ones it finds first.(Check the Java installation on your linux Machine)
Try adjusting your path to make the folder containing those files the first named folder in the path. This way you can be sure you are getting the right version.
Also, and I know this may sound silly, please make sure those files can actually be read.
and finally make sure that you unset LD_ASSUME_KERNEL.
Regards
Rama Kishna N K J

Rapidwiz error cannot open shared object file: libpthread.so.0 libc.so.6

Hi,
We are following Note 238276.1 Migrating to Linux with Oracle Applications Release 11i, trying to install the technology stack (Section 2: Step 4), in a RHEL5 64Bits.
We have downloaded the startCD (B29029-01) and the TechStack CDs (B29032-01_2of2). When running the ./rapidwiz from startCD, we get following error:
/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
chmod: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
More info:
[applmgr@desaebs rapidwiz]$ ldd '/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre'
linux-gate.so.1 => (0xffffe000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00bed000)
libdl.so.2 => /lib/libdl.so.2 (0x00be7000)
libc.so.6 => /lib/libc.so.6 (0x00a9f000)
/lib/ld-linux.so.2 (0x00a81000)
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libpthread.so.0
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libc.so.6
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libdl.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/ld-linux.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ locate linux-gate.so.1
It seems that linux-gate.so.1 is not present, I'll try to install it, but I'm not sure this can be the real problem.
Any idea?
Thanks!
Alvaro

Yes, thats correct ...
The actual situation is:
-Customer has split configuration: DB 11g in RHEL5x86-64Bits + APPS 11.5.10.2 in Windows2003
-The target is to have all DB11g and APPS R12 in single node RHEL5x86-64Bits
We're following Note "Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]" to migrate the APPS server from Windows to Linux, as a middle/temporary step prior to make the Migration to R12.
We are trying to do it, but we get errors during Section 2.4 "Install the Middle Tier Technology Stack", running the rapidwiz command we get errors, because of R11i is not supported in 64bits platforms (Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1])
Our bigest doubt now is that we are trying to install 11i techstack into RHEL5 x86-64bits, and we think this is not possible, because of R11i is not supported in 64bits platforms !!!
That is, could we migrate the APPS server from Windows to Linux x86-64 as a temporary step to begin the upgrate to R12 all in RHEL5x86-84bits, that is full supported on this 64bit platform?
What possibilities do we have if we can't do this?
Theese can be some of them:
1-Migrate apps server from actual windows2003 to Linux 32bit, in other host with 32 bits installed, instead of 64bits, and move here from windows to lilnux 32bits, and the begin the R12migration
2-Migrate to R12 into actual appserver Windows2003 and then migrate appserver from windows to rhel5-64bits
I don't like second option, because we want to make the R12 upgrade into Linux, not in windows. We need to eliminate windows platform as soon as we can.
Thanks in advance ,

Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE:      adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!

Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
     Configuring IES_TOP.......COMPLETED
     Configuring CSD_TOP.......COMPLETED
     Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help!

Error running rapidwiz

Hai al,
Tried a fresh installation of 11.5.10.2 on Linux RHEL ES 4
rapidwiz
java.lang.NullPointer.Exception
at oracle.ewt.lwAWT.BufferedFrame._init(Unknown Source)
oracle.ewt.lwAWT.BufferedFrame.<init>( Unknown Source)
at RIWizard.main(Unknown Source)
Tried setting display variable and tried running xhost +
But am getting the same error
Thanks
Kai

Please verify you have satisfied all OS prerequisites and are installing as root.
Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=287453.1
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
Also verify the kernel settings for 9.2 RDBMS on Linux from the following note:
Oracle Database on AIX,HP-UX,Linux,MacOSX,Solaris,Tru64 Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1

Rapidwiz input error, can it be fixed w/out a re-run?

- doing rel12 upgrade. made an error on rapidwiz input.
- some services on the apps-primary and app-additional should have been disabled.
- rapidwiz has completed the "create upgrade file system" on the "apps-primary" node.
- Is there a way to change the services on the "apps-primary" not to start specific services?
any help?

In Oracle Applications Manager, click on the Auto Config link, then oa_services. Disable any of the enabled services you do not want to run and run autoconfig on that node.

Rapidwiz launch error Exception in thread main java.lang.UnsatisfiedLink

i am having the same issue rapid wiz is throwing an error
please share info of how to install 32 bit rpms on 64 bit ?
And these 32 bit rpms also need to be installed to get over the rapidwiz launch error :Exception in thread main java.lang.UnsatisfiedLink
rpm -Uvh libXau-1.0.5-1.el6.i686.rpm
rpm -Uvh libxcb-1.5-1.el6.i686.rpm
rpm -Uvh libX11-1.3-2.el6.i686.rpm
rpm -Uvh libXext-1.1-3.el6.i686.rpm
rpm -Uvh libXi-1.3-3.el6.i686.rpm
rpm -Uvh libXtst-1.0.99.2-3.el6.i686.rpm

ninjanoodle5 wrote:
thank you Hussein,
issue is now resolved
steps followed : yum install --setopt=protected_multilib=false *giveyourpackagename*.i686
Thanks for the update and for sharing the solution.
Regards,
Hussein

Stage11i rapidwiz exec error

Hi Friends,
I am Installing EBS 11i on RHEL4.
I already done all the pre-requisites.
Then I proceed to login as root:
cd Stage11i/startCD/Disk1/rapidwiz$./repidwiz
but I got error:
Rapid Install Wizard is validating your file system......
Rapid Install Wizard will now launch the Java Interface.....
: bad interpreter: No such file or directorydwiz/bin/runWizard.sh: /bin/sh
I try to cd bin and run
$ ./runWizard.sh
: bad interpreter: No such file or directory
Is my installer corrupted? Please help....Thanks a lot

I dont know if I am using the latestYou can verify by running the script mentioned above.
can i also use the latest rapidwiz of R12?You cannot.
I think I deleted the source too because I run out of space thereDownload the patch since this is the only option you have now.

Rapidwiz - libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3

Hello All,
I am getting libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3
I could not find the exact file to download. Can anyone of you help me to the proper location.
Thanks in advance.

987696 wrote:
Hello All,
I am getting libXtst.so.6 error when installing EBS R12 on Oracle Linux 6.3
I could not find the exact file to download. Can anyone of you help me to the proper location.
Thanks in advance.Please see these docs -- Search for "libXtst.so.6".
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Oracle Forms Upgrade to 10.1.2.3 fails with error /usr/lib/libXtst.so.6: undefined reference [ID 1120527.1]
Thanks,
Hussein

Error "RC-50013" in ApplyAppsTechStack for Step 3 of 5 (53% and 92%) R12 installation

I've tried to install R12 on Windows Server 2003 32-bit as well as 2008 64-bit.
Both instances generated seemed to hang at Step 3 of 5: 53% total and 92% (Registering Tech Stack)
I'm using Cygwin and Visual Studio 8 that were configured based on this guide: http://dl.dropboxusercontent.com/u/84997033/eBusiness%20Suite%20Installation%20Guide.pdf
The OUI states that ompn has been started and no other actions are displayed.
The command: ps -ef | grep opmn returned nothing which tells me there were no processes running in regards to opmn.
Any help would be greatly appreciated
The following logs are from the 32-bit Windows Server 2003 installation:
The 12101150.log in VIS\inst\apps\VIS_darien\logs contains the error code:
|      3% completed
/      3% completed
-      3% completed
\      3% completed
|      3% completed
/      3% completed
-      3% completed
\      3% completed       RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
ApplyTechStack_12101247.log contains the following:
Started ApplyAppsTechStack at Tue Dec 10 12:47:52 CST 2013
Version:
ApplyAppsTechStack.java : 120.23
Executing home registration for s_weboh_oh...
Registering using Registration Driver
E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to E:\oracle\VIS\inst\apps\VIS_darien\out\ouicli.pl
   setting permissions: 700
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to E:\oracle\VIS\inst\apps\VIS_darien\out\txkstubcfg1013.pl
   setting permissions: 700
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to E:\oracle\VIS\inst\apps\VIS_darien\out\apachectl
   setting permissions: 700
Executing script in InstantiateFile:
E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_weboh_ohTue Dec 10 12:47:55 2013
E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath C:\StageR12\startCD\Disk1\rapidwiz\jlib\java;E:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;C:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e E:\oracle\VIS\inst\apps\VIS_darien\appl\admin\VIS_darien.xml -nolink -oaVar s_weboh_oh -homestub weboh -log E:\oracle\VIS\inst\apps\VIS_darien\admin\log\ohclone.log
running OUI CLI home cloning:
E:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=E:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_darien_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_darien_WEBOH -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to E:\oracle\VIS\inst\apps\VIS_darien\out\ouicli0.pl
   setting permissions: 700
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to E:\oracle\VIS\inst\apps\VIS_darien\out\txkstubcfg10130.pl
   setting permissions: 700
instantiate file:
   source : E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
   dest   : E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
   backup : E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to E:\oracle\VIS\inst\apps\VIS_darien\out\apachectl0
   setting permissions: 700
E:\oracle\VIS\inst\apps\VIS_darien\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
      ouicli.pl               INSTE8_APPLY       -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv

Hi again Hussein,
I tried the steps you mentioned but still no luck, same error. I was wondering if we could talk about this privately as I would like to purpose something to you.
Also, I've updated the logs with as many as I could find.: https://www.dropbox.com/s/k10fcwo7jzwonjx/LogsUpdated.zip
Just in case you were wondering.
The new setup is as follows:
Full Computer Name: Darien.workgroup.com
Workgroup: WORKGROUP
Computer Name: Darien
Member of: WORKGROUP
Primary DNS suffix: workgroup.com
The updated host file is:
192.168.100.44
eola
192.168.100.40
aurora
192.168.100.41
bolingbrook
192.168.100.46
FAIRVIEW
192.168.100.43
Darien.workgroup.com

Problem with installing R12 with Win 2008 (Rapidwiz 12.1.1.9)

I could really use someones help.
I did a download recently of Oracle Financials R12 for windows (I'm using WIN 2008 server) which contained version 12.1.1.9 Rapidwiz. I was unable to get it to work as individual DVD's which is fine, I build the staging area and had better results.
The first error I encountered was the release contained JRE 1.6 but the install referenced 1.5. I took a suggestion that I saw to copy the directory and rename it which worked just fine.
The next error I encountered came during the database install. There was some problem with the database service. It sounds similar to a problem discussed about just the database not related to Oracle Financials but the "fix" to just start the database doesn't seem to apply.
Below is the Rapidwiz log. The warning first mentioned is to check to be sure that the Administrator user being used in the install belongs to the administrator user group which of course it does.
I've brought to the top of the log, the error that I think is occurring. Please help me install, I'm trying to evaluate the software but having trouble with just the install is concerning.
Brought up from log
"runProcess_5"
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>REM Set user to the ORA_DBA group
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA /ADD /COMMENT:"Members can connect to the Oracle database as a DBA without a password"
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA TOBEY\Administrator /ADD
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error: 75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Rest of log available if it would help. Thanks!

Thanks for the starting point.
The user I am using for the install is Administrator and I confirmed using the NET command that Administrator is a member of the Administrators group and the Domain user group.
Result of NET USER ADMINISTRATOR:
C:\StageR12\startCD\Disk1\rapidwiz>net user administrator
User name Administrator
Full Name
Comment Built-in account for administering the computer/dom
ain
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 5/24/2011 6:31:40 PM
Password expires 7/5/2011 6:31:40 PM
Password changeable 5/25/2011 6:31:40 PM
Password required Yes
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 6/1/2011 8:23:40 AM
Logon hours allowed All
Local Group Memberships Administrators       ora_dba
*WSS_ADMIN_WPG
Global Group memberships Domain Users         Schema Admins
Enterprise Admins    Domain Admins
*Group Policy Creator
The command completed successfully.
I still get the warning message about the user account but continue as other posts indicate.
Still get get the error.
The Oracle VIS VSS Writer Service service is starting.
The Oracle VIS VSS Writer Service service was started successfully.
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error:75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
instantiate file:
I see that there is a version of Rapidwiz beyond my 12.1.1.9, is this required to get around this?
Is there another cause of this error?
Am I understanding the assignments to administrator correctly?

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

Error RW-50010 and RW-50004 - When try to install 11i on OEL5

When i try to install oracle 11i on the OEL5, i have got the below error, can any one advice on this.......
Below error in file :- 05061003.log
Running Instantiation Drivers for /d01/Stage11i/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /d01/Stage11i/startCD/Disk1/rapidwiz/template/adrun9i.sh
dest : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh
backup : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/templbac/adrun9i.sh
setting permissions: 755
setting ownership: oracle:oinstall
instantiate file:
source : /d01/Stage11i/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrundb.sh
backup : /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrundb.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:oinstall
Step 0 of 5
Command: /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Executing: /d01/oracle/visdb/9.2.0/temp/VIS_oracleapp1/adrun9i.sh APPS APPS
STARTED INSTALL PHASE : 9i RDBMS : Fri May 6 10:04:06 BST 2011
runProcess_5
Statusstring Executing Command: InstantiateFile -d addbtmpl.drv
Cannot execute configure of environment for database ORACLE_HOME
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
This error I got it in the file :- dbInstancecfg.log
instantiate file:
source : /d01/oracle/visdb/9.2.0/appsutil/template/adcctclean.sql
dest : /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/adcctclean.sql
backup : /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/adcctclean.sql to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_oracleapp1/05061004/adcctclean.sql
setting permissions: 600
Executing script in InstantiateFile:
/d01/oracle/visdb/9.2.0/Apache/perl/bin/perl -I /d01/oracle/visdb/9.2.0/Apache/perl/lib/5.00503:/d01/oracle/visdb/9.2.0/Apache/perl/lib/site_perl/5.005:/d01/oracle/visd
b/9.2.0/appsutil/perl /d01/oracle/visdb/9.2.0/appsutil/scripts/VIS_oracleapp1/adchknls.pl
script returned:
Validating information needed for NLS........
DATABASE version : db920
No NLS specific checks required
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
/d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1/afmkinit.sh
script returned:
afmkinit.sh started at Fri May 6 10:04:17 BST 2011
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle/visdb/9.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/oracle/visdb/9.2.0/Apache/perl/bin:/d01/oracle/visdb/9.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle/visdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr
/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/d01/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X
11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /d01/oracle/visdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/visdb/9.2.0/ctx/lib
afmkinit.sh exiting with status 127
.end std out.
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /d01/oracle/visdb/9.2.0/appsutil/install/VIS_oracleapp1
afmkinit.sh INSTE8_SETUP 127
AutoConfig is exiting with status 1
Edited by: user9220213 on 06-May-2011 02:26

HI,
Please check below note:-
Installation of 11.5.10.2 On OEL Fails [ID 747424.1]
Thanks,
JD

Rapidwiz error

Similar Messages

Maybe you are looking for