"Rastertosec failed" error with Samsung ML-2010

In the last 30-days or so, I've been unable to print to my Samsung ML-2010 laser printer. Previously, even after my upgrade to Leopard, I had no issue. I've removed and reinstalled the printer numerous times, but to no avail. I have no problems, however, printing to my Epson RX580.
When I attempt to print to the Samsung, the printer dialog appears and shows the print job as 'stopped'. If I hit resume, the job starts up again, but the message "/Library/Printers/Samsung/ML-2010/rastertosec failed" appears. I read somewhere else that this could be related to a security update that was pushed out a few months ago, but there was no more information to support that.
Any help would be appreciated.
Thanks!

Hi,
Try with Samsung ML-2240 Laser printer driver instead of ML-2010. It can be downloaded from Samsung website.
http://www.samsung.com/Support/ProductSupport/download

Similar Messages

  • Airport Utility `install failed' error with both 6.0 and 6.1

    Hi folks
    I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
    I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
    Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
    It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
    Any ideas or suggestions please?
    Thanks in advance.

    Welcome to Apple Communities
    Backup your files and try this:
    1. Reboot from recovery partition (or as in my case USB recovery drive)
    2. Select Re-install Mac OS X
    3. Allow the process to run through multiple restarts
    4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
    5. Run all updates saving the Airport Utility 6.0 until last.
    6. Install the airport utility from software update.

  • "Load report failed" error with VS 2010 upgrade

    I have a report system that has been running nicely for a few years. Today, I upgraded it to use the latest Crystal from Visual Studio 2010. I installed the .net framework 4.0, installed the Crystal runtime (64 bit), and updated the web site with slightly revised code to use the new stuff. Now, reports that worked yesterday fail with the 'load report failed' error. A little research shows that the file name passed to the report engine is correct (and is the same as it has always been). I see that rpt files are being created in windows\temp each time a report is requested, so it seems that the report file is being found.
    The code change I made was to use the new ExportToHttpResponse method.
    When deployed in development and test environments (both 32 bit). this worked perfectly. In production, however, no such luck. I wonder if I have missed a setting somewhere, or if there is something extra to do on a 64 bit server?
    Does anyone have a clue for me?
    More info - I found the following error in the event log:
    The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
    ... which I thought was interesting until I noticed the same error occurs on my dev machine, where the reports are working.
    I also used process monitor to check the dlls loaded on the production box, and they all seem to be the latest version. I tried using the 'modules' utility on my production box, but it did not pick up the Crystal stuff (or any of my web stuff - I wonder if it is a 32-bit only tool?).
    Edited by: Ray Novak on Dec 29, 2010 5:12 PM

    I just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
    I used process monitor to see what was happening, and here are the results that seem interesting:
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    IRP_MJ_CREATE     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config     NAME NOT FOUND
    FASTIO_NETWORK_QUERY_OPEN     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll     NAME NOT FOUND
    Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system.

  • Cannot print wirelessly with Samsung ML-2010.  Recently installed Leopard.

    i'm having an airport printing problem with my Samsung ML-2010. I have never used it with an airport express, but have successfully used my iBook G4 to print successfully using several airport connected printers.
    I have lost my "Printer Setup Utility" since recently installing Leopard. I have read this is a common problem.
    The point is that I can still print using my USB cord, but am having no luck with the airport. I also cannot add a printer using Rendezvous or Bonjour.

    Right then. He's a Mac-to-Printer direct work-around for the problem.
    Before you start. Ensure you have the ML-2010 driver installed. Connect the printer directly by USB to check.
    1. Open Print & Fax Preferences.
    2. Click on + to add printer.
    3. Select IP at the top of the page. Select HP JetDirect - Socket in the drop down.
    4. Enter the address of your AirPort Extreme (IP Address or name such as living-room.local) then add the socket number. 9100 for the first printer, 9101 for the second printer.
    4a. If you've got the address right it will verify this and confirm this on screen. It will select a generic postscript driver which you will change in step 6.
    5. Enter a Name and Location in the boxes at the bottom.
    6. In the Print Using box, choose Select Driver and then search for ML-2010 driver. Select it.
    7. Click Add and you're done.
    You will now have the printer included in your list.
    8. Click Open Print Queue.
    9. With the print Que open select from the Menu Bar: Printer > Print Test Page.
    10. Bingo you'll see the CUPS test page.
    Now. If you have a windows PC with Bonjour Printer Wizard and you've got a working printer queue. You can crib the network address by looking at the TCP port information for the print queue. It will reduce the amount of guessing. But generally, the hostname is base-station-name.local with the spaces replaced by hyphens.
    This should work for everyone and I so far (2 hours testing) I've not had a failed print.
    Good luck and quite honestly I can wait for the fix to the bungled update now.
    Karl

  • "Connection to server failed" error with Gmail exchange server

    Hi,
    I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
    I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
    I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
    I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
    Message was edited by: KJones75

    I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
    I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

  • I get a "Secure Connection Failed" error with google stating "certificate contains the same serial number"

    When I click on a link for a google search, I get the "Secure Connection Failed" error in Firefox. It states, "Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority."
    I have followed the instructions here:
    https://support.mozilla.org/en-US/kb/Certificate%20contains%20the%20same%20serial%20number%20as%20another%20certificate
    and looked at this article:
    https://support.mozilla.org/en-US/questions/1028103?esab=a&as=aaq
    I have uninstalled and reinstalled Firefox, deleted the entire profiles folder, and reset Firefox. I see that the older (orphaned) article points to my router. However, I have a new router and have updated its software. There is no button to add an exception (as noted in the article), so I can't just bypass it. This problem does not occur with IE, so I have a hard time believing it is my router.
    How do I troubleshoot this issue? I really don't want to change browsers.

    Here is a screen shot of the error.

  • "Connection failed" error with time capsule

    I can't access my time capsule. I get a "connection failed" error.  And yet, the WiFi still works.  I've tried resetting and unplugging and re-plugging.

    I've returned home after some time away, and it's back to the Time Capsule problem!
    The Time Capsule Status icon (the clock symbol in the menu bar) was grey - I went into Time Capsule Preferences, chose 'Select Disk' and selected 'Data' as the back-up location (the name of the Time Capsule folder). I then chose 'Backup Now' and the status icon turned black & began turning - with message 'Making Backup disk Available'. A couple of times, nothing happened beyond this - and I received an error message.
    However after restarting my laptop (note I have shut down and restarted a number of times anyway since end November) the 'Making backup disk available' message was quickly followed by 'Calculating Changes...'. Out of interest, Time Machine Prefernces says that Oldest Backup is "--" and Latest Backup is "--". After 5 minutes, the status changed to 'Calculating Changes... (1%)' and at this point I was able to open Time Machine, and move back to previous backups (most recent being 27 November). It went on to showthat it was backing up 24.5 GB, and began this process. Then the status icon switched to a black circle with warning triangle and Time Capsule Preferences now reads;
    Oldest Backup: 27 November 2009
    Latest Backup: Failed
    The error message (in the icon) is:
    Make sure your computer and the backup disk are on the same network, and that the backup disk is turned on. Then try again to back up.
    Latest successful backup: 27/11/2009 at 22:17
    Help appreciated!

  • Assertion failed error with bonjour

    I am getting and assertion failed error. Here is the actual message
    microsoft visual c++ Runtime Library
    Assertion failed!
    Program:...
    File:.|mybonjour.cpp
    line:286
    Expression:lerr==knsserviceerrno error
    Does anyone no what this is? Ever since I started getting this error my printer has gone caputs. I have to keep reinstalling the driver. Ans it is getting worse. Please help!

    I too am having this problem. I get the same error about 1 week now. Ever since none of our computers can print to our network printer. The network printer is a Lanier 5515 (commercial printer). We have never had problems in over 5 years. As of now it has our business at a stand still; we cannot print anything. I prints random strings of characters.
    Called Apple and there suggestion was to uninstall all their products (itunes, quicktime, apple updater, and mobile device support) which I did and on restart I still get the same error screen. And still cannot print. Seems something in Bonjour has permanently been placed on my system.
    Apple or someone please help!!.
    Thanks,

  • HOST Failed errors with multi-core processing in Compressor

    I used Digital Rebellion's Pref Mgr to trash all prefs; then Compressor Repair to fix them.  Rebooted.  Stopped Qmaster.  Reset services.  Established 5 instances ( I have 8 core Xeon 2.8ghz Mac Pro ).  Restarted Qmaster sharing.  Opened FCP file, sent to Compressor.  Selected DVD settings.  Chose cluster I set up in Qmaster.  Submitted. Instant "HOST Failed" error messages on the five instances that appeared in Batch Monitor.
    Help.  Tired.  Frustrated.  ******.

    If you really are running 10.6.2, I'd start by running all software updates.
    See what happens if you export a 5 minute section of your movie, export that as a master file and bring that movie into a new Compressor job,
    Post a screen shot of the Computer Sharing settings window to see whether anyone can spot something amiss.
    Russ

  • How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

    I have two printers installed on Windows Server 2008 R2 (64-bit):
    1. Samsung SCX-4521f
    2. Samsung SCX-4300
    There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
    The drivers installed are as follows:
    SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7    3.04.96:03    Print Driver    11 Dec, 2009    12.37    MULTI LANGUAGE)
    SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
    After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
    On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
    The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
    The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
    Neither will print a test page.
    Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
    The error persists and nothing will print.
    When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
    "Printer: Error" and "N document(s) in queue".
    Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
    As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
    Once all the jobs are cleared the printer information says "Printer: Ready".
    Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
    With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
    However, I can't see any specific error messages.
    How do I find out what exactly "Needs troubleshooting"?
    Please can anyone advise further?

    The printer (SCX-4300) has stopped again.
    Since it has been stopped I have done your recommendations:
    Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
    Set the "Interactive Services Detection" to Automatic and started it.
    Unfortunately the printer did not start printing, the print jobs did not restart or delete.
    I decided to check the Operational logs that we enabled.
    The first job I see goes like this:
    Information: Rendering job 41.
    Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
    Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
    sandbox). Win32 error code returned by the print processor: 0x0.
    Information:Printing job 41.
    Information:Spooling job 41.
    This job actually printed.
    Other jobs printed fine with no error.
    There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
    Any ideas what to try now?
    Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

  • Adobe Flash Player 10.1 issues, errors with Quickbooks Pro 2010 installation

    I recently - uh today - had an agonizing experience installing Quickbooks Pro 2010 because I kept receiving error messages during the Quickbooks installation. It was a new cd that I had purchased a few months ago from Costco, and had been putting off using it, or even installing it.
    So today, I tried to install it, and failed repeatedly. I kept getting the same message, Adobe Flash player file is unavailable - with a drop down screen showing the location of the flash player file that the installation software was trying to find so it could continue the installation. I think I recall seeing an error message originally with Adobe Flash Player 10.1, but it's been a long day, so maybe the error was always referring to Flash Player 8.0.  I tried to browse for a new location that the Flash Player file might be located, looking through the Program Files\Adobe and coming up with nothing.
    I spent a long time looking through the discussion forums on both Quickbooks and Adobe trying to find the answer, also turning off and on my computer,  ha. And I installed the latest Flash version, Flash Player 10.1, then uninstalled it and then reinstalled it, and then uninstalled it and looked for the obsolete Flash Player 8.0 which I couldn’t find on Adobe’s website, but found links to in two other forums…So basically, I tried to solve this on my own, and it didn't work.
    So...I was whining to a friend who suggested I just call Quickbooks technical support. Duh, why didn't I think of that? I guess because the packaging on the new software says that fees may apply if you call customer service.  Well, it doesn't apply to the first call, and also it's crazy to charge someone who can't even install the program. So I called them, and was on hold forever.
    But the problem was solved.
    The tech support person, Manish, was able to install Quickbooks by completely bypassing the usual installation procedure.  He checked for compatibility, which was fine, I have Windows XP, etc. and then I believe went to control panel, add or remove programs, and clicked on add programs, and followed the icons with the Wizard to install the latest version of Quickbooks.  The interesting thing here is that QB has some special download to allow remote access during a trouble shooting call. It initially freaked me out, but it worked just fine, since I could see what was happening on my computer screen even though I wasn't the one operating the computer.
    I asked Manish why this installation method seemed to work. He said some of the Quickbooks cds have a bad Flash Player program file, and doing it this way seems to bypass it. He also said that Quickbooks should not compatibility issues with Flash 8.0 or Flash 10.1, but there were some problems noted with Flash Player 9.0.  I asked if I would have problems if I uninstalled Flash Player 8.0 and then reinstalled 10.1. He said there shouldn’t be problems, so that’s what I just finished doing.
    Hopefully this is helpful for someone else out there in cyberland.
    Also, it was kind of helpful, someone else posted on another forum that you could check what flash files you have by going to C:\Windows\System 32\Macromed\Flash, because I couldn’t even find where the Flash Player was installed.  They are not in the Program files under Adobe.

    Hi, well that sounds like quite an ordeal. Your Flash files are located in C:\Windows\System32\Macromed\Flash  Open Flash with a right click and post back all files listed there. It may be a good idea to just confirm that they are correct.
    Then Using Internet Explorer, go to Tools, Manage addons and Toolbars & Extensions and look for a box Show all add ons.
    You should find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is enabled.
    The Flash files and that ActiveX Control is Flash Player.
    Now if you use another browser, you may want to post that version info as well. Also, what service pack do you have with XP?
    Thanks,
    eidnolb

  • How to fix AppleEvent handler failed error with command "make new mailbox with properties"

    Below is the script I am running to create a hiearchy of new mailboxes inside "ON MY MAC" folder area.
    tell application "Mail"
      make new mailbox with properties {name:"ABar"}
      make new mailbox with properties {name:"ABar/Foo"}
      make new mailbox with properties {name:"ABar/Foo/Me"}
    end tell
    When I execute this the first mailbox is excuted fine but right afterwards I get the following error:
    error "Mail got an error: AppleEvent handler failed." number -10000
    I have tried adding delays but this does not work either. Code:
    tell application "Mail"
      make new mailbox with properties {name:"ABar"}
      delay 0.2
      make new mailbox with properties {name:"ABar/Foo"}
              delay 0.2
      make new mailbox with properties {name:"ABar/Foo/Me"}
    end tell
    However rerunning the script and skipping over the make command if the folder already exit, causes the next exuction time to create one more folder.
    Code:
    tell application "Mail"
              if (mailbox "ABar" exists) = false then
      make new mailbox with properties {name:"ABar"}
                        delay 0.2
              end if
              if (mailbox "ABar/Foo" exists) = false then
      make new mailbox with properties {name:"ABar/Foo"}
                        delay 0.2
              end if
              if (mailbox "ABar/Foo/Me" exists) = false then
      make new mailbox with properties {name:"ABar/Foo/Me"}
                        delay 0.2
              end if
    end tell
    ** Anyone know how to solve this or why this is happening? **
    It almost feels as if the hiearcgy is read into memory and this is not updated after the creation of the new mailbox.
    Thanks!

    Hi,
    The processors are different archiectures and you can not use binaries from one architecture to work on the other.
    Library name suffix differences is an example of the importance of this. Tuxedo 6.5 was separately built for each of those architectures and
    is available on the PeopleSoft distribution as distinct binaries. If your migration was purely from HPUX11.11 to HPUX11.23 you might have
    succeeded but the processor difference will not work for you and a core dump would not be unexpected.
    Bob Finan
    FYI:
    Tuxedo 6.5 is end-of-lifed and, since it's EOL has passed the stage for extended support possibility, no new patches will
    be created for it by engineering. You should look to migrate to a newer version of Tuxedo/Peoplesoft at the earliest
    possiblity.

  • Crystal Reports 10 with Visual Studio 2010

    We have Crystal Reports 10, which I have installed. The viewer provided with the install runs fine. We have an application that has an embedded viewer.
    Then I'm just trying to get the simple C# sample code to run in VS2010, which is just a form with the viewer component reading an existing .rpt file. But I get a "Load report failed" error with no other details. Seems like it really should be simple. Any idea what I might be doing wrong?
    I'm running Win7 64, but compiling in x86 mode.

    Well, you have two options;
    1) Go with the version of CR that bundles with .NET2005 (CR 10.2)
    2) Go with CRVS2010 and VS2010
    CR10.0 is not supported in either .NET2005 or .NET2010. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/WhichCrystalReportsassemblyversionsaresupportedinwhichversionsofVisualStudio+.NET] wiki for more info.
    There are no work-arounds, no nothing that I can help with or recommend.
    - Ludek

  • Brand new Galaxy III S - Cannot setup Yahoo email - 80201: Getting Token Failed Error

    I got my brand new phone; logged in/set-up account with gmail.
    I added my corporate email just fine.
    Adding a yahoo email I get the following error: 80201: Getting Token Failed Error
    I've tried over wi-fi and on 4G.   
    Also, it doesn't matter what email and password I put in - same error.
    Note: I had a Galaxy S previously with Yahoo email - this isn't the first time I've configured an account.

    Same issue cannot create email accounts using the Email app - 80201: Getting Token Failed Error with Yahoo, AOL and Hotmail. Any Verizon support people here? Can you help?

  • Export Failed: error - 108??

    Hi All,
    Running FCPX 10.0.5
    Trying to export 1hr,40min clip. Getting EXPORT FAILED error with description:
    The operation could not be completed because an error occurred when encoding frame 5097 (error -108).
    My Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          4 GB
    4 Hard Drives: 320GB, 750GB, 750GB, 1TB saving onto the 1TB with 250GB storage remaining.
    Any ideas for resolution??
    Will try and split clip in half and export!
    Cheers Ryan

    Are you really running OS 10.5? 10.6.8 is supposed to be the minimum.
    EditCodes explanation for the 108 error is the application has run out of memory.
    4 GB is not very much RAM for FCPX.
    Russ

Maybe you are looking for