Rating and Labels

My ratings and labels made in camera raw are not showing in Bridge. I am using Adobe Bridge CS5. What could be the problem?

eklentileri açmamış olabilirsin
http://www.bayanescortrus.com

Similar Messages

Rating and labelling images is not working in Photoshop Bridge CS6. The Rating and Label headings in the Label menu are greyed out. Any ideas for correcting this would be appreciated.

Any suggestions for restoring the Rating and Label options in Photoshop Bridge CS6 would be appreciated.

Please post Bridge related queries over at
http://forums.adobe.com/community/bridge
Maybe it’s permissions issue … what volume are the files on?

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

How do I rate and label files in Bridge CS6?

Fulltime student and a new cloud member. Having problems with first project. I can't nor can the instructor figure out why I'm not able to rate and label files in Bridge CS6.

No clue why I didn't think about this.
Isn't that why we are here?...
But serious, I understand your wish for a big preview but not your wish for clicking, never been a fan of RSI myself
It is a long standing issue rating and labeling are not the same in all circumstances but clicking in the preview window might be a difficult wish to fulfill. There are many ways to use Bridge but if you like big previews consider this:
In the Bridge prefs advance tab select 'generate monitor sized previews' (this should create good full screen previews)
Then either select a bunch of files in the content window you want to judge or just start at the first file.
Hit space bar and full screen preview starts showing (when all files have been cached it should take very less time or real time to show good previews.
With arrow keys cycle through the files and with cmd + . or cmd + , (comma, I now realize I had it wrong in the other post) to increase or decrease ratings. All the keys are adjustable with only one hand and very close to each other. And clicking on a spot does show a 100 % preview of that part.
But as said before, so many users, so many workflows

Share ratings and labels

Is there a way to share my ratings and labels that I made in Bridge with other people?
I usually work with my editor, we both have all the clips on our computers (we work in different places).
What I'd like to do is to give him all the ratings and labels I've done in Bridge without sending him all the files again.
Can I do something like this?
Thank you!
Stefano

Thanks, but I work with video and I do all the shooting. Once at home I review all the footage within Bridge and I sort all the clips by rating them with 1 to 3 stars.
Sometimes my editor doesn't have any file when I've done all the rating so I just send him all the files and they actually have rating and label inside the metadata (because Bridge writes them inside the file's metadata while rating).
The problem is when my editor takes with him all the footage right after the shooting (and it happens quite all the time). When I've done all my sorting I need to send him stars and labels but it's not confortable to send him all the files again so I was wondering if there is a way to export all my ratings to send him.
Working with Premiere and After Effects is easy, we both have all the footage in the same directory and we just have to send the projects to each other (and the software automatically link all the media) but recently I've discoverd how usefull is Bridge to orginize and manage all the clips and I'd like to share with him all my work. It'd be a lot easier and faster!
Thank you again,
Stefano

I can select a rating and a color label for my images, but I can not sort by rating and color label.

I can select a rating and a color label for my images, but I can not sort by rating and color label. when I click on the filter drop down, color label is not one of the options. how do I get both ratings and color lables as an option to sort with.

You can Filter (not sort) on both color label and rating if you want, open the Filter Bar with the backslash key, then click on Attribute, and then select the stars and color label of interest. If you really meant "sort" and not filter, then you can't do this in Lightroom.

Grid View: Flags, Rating, Color Label read only? / Mark Images Read only?

Hi
I'd like to see the flag-status, rating and color label assigned to an image as cell icons. But if I show them as Cell Icons, I am also able to change them, which happens to me quite often accidentally when I click into the frame of a image to change selections.
Is it possible to show these markers for each image without being able to change them in the frame? I would be quite happy being able to change them from the tool bar, but still being able to see them on the single image.
Related to this:
Is it somehow possible to mark images as read only, so that further changes (development, metadata etc.) can be made impossible? This would be nice for older images, which have been processed completely and should stay that way, inhibiting accidental changes to images. Sometimes it is difficult to even notice when one accidentally changes metadata on an image.
Thanks for your thoughts
Beat Gossweiler
Switzerland

Yes it's a bug. I see it on Mac platform.

Applying star rating/color label to "Current Pick" in Stack View mode

Is it possible to apply a star rating/color label to the "Current Pick" in Stack View Mode? Thanks.

is there a way of applying both the five-star rating, AND the green color label at the same time, with one keyboard shortcut, or otherwise?
If you need to do this in exactly one action, then I don't think there is a way to do this. Of course, if you want to accomplish this in two actions, you can select all the 5 star images, and then apply the Green color label to them all in one step, but that isn't what you asked for.
Is there any way to make my five-star rated photos more visually prominent in the grid view?
Not that I know of
ANother thought is to create a smart collection of your 5 star images, and then you can use the smart collection to view the 5-star images (none of the other images will appear)

Ratings and Labels

I am finally convinced that I should start using Adobe Bridge for organizing my pictures (it seems a little late in the game since I have around 80,000 pictures in my system). However ... I need something to do this winter, so I want to concentrate on organizing my pictures.
The question .... I'd like to get input on what others have done with both ratings and labels. I would suspect that a rating of 5 would be outstanding and 1 would be poor. A red label could be for B&W.
If I am going to spend a lot of time organizing, I'd like to start with a good base of organizing tools that mean something.
Also ... if anyone has any other tips for organizing in Bridge, PLEASE list them....
Thanks

Maybe the Bridge Forum is a better place for the question:
Bridge Macintosh

Feature Request: Linked flags, ratings, and labels in a stack

I use stacks to group the original image with derivatives of that image, but the way Flags, Ratings, and Labels work on stacked images isn't well implemented for that.
Often, I will create derivatives of the original by flagging a bunch of images as Picks, then using export to create the new files. When I do this, the rating and status of the original are automatically added to the new files. Unfortunately, the Flag status is not, so I cannot, for example, just set a filter for Flag = Pick and continue working with the same set of images. Likewise, since stacks aren't fully implemented in collections, I can't just create a collection first and then continue working there the way I'd like to.
What I'd like is to have a checkbox in the export dialogue, when I am stacking with the original, that will allow me to copy the Flag status to the new files. That way, my Flag=Pick filter will allow me to keep on working with the same set of photos.
Even once the photos are stacked, I can't really work with them as a set because, now, a Flag, Rating, or Label change to one image in the stack doesn't affect the others. For me, since these are all derivative of the master image, I generally want such changes to apply to the entire stack. I know this probably isn't true for others, so what I envision is an intuitive icon on a stack to quickly link or unlink, or select or unselect, all images in the stack. When all are linked or selected, any changes would affect all the images in the stack, otherwise, changes would only apply to the currently selected or visible image in the stack.
Paul Wasserman

Thanks Carolyn.
I'll follow your link.
I'd also like to know others input. Sometimes I think I'm the only ones who is used to shortcuts, or I have to wait until forum residents quit writing (others might think I'm taken care of and not replying) so people who actually uses the Mac to work can opine.
Anyway, here's how I use the browser when working. I think it's very common, or at least enough for an "option".
https://discussions.apple.com/message/18776345?ac_cid=op123456#18776345
(I didn't want to post it here too)

Rate and label both nef and jpg files

Hello everyone, this probably sounds like a silly newbie question, but is there a simple way to rate and label both the nef and jpg files in bridge.
I work on a pc and right now I have to click on the nef file then ctrl click the jpg file then ctrl #(1-9) to rate both. It seems like a lot of work. When I use batch processing to rename my files it processes them both so i get a raw and jpg with the same name, so why not with labels?
I'm trying to create an easy working flow to my folders and pictures. My camera settings are set to raw (nef) and jpg. I like to have access to both incase i need to send out a jpg etc etc.
Can someone point me in the general direction on how to keep my workflow clean and simple and how to affect both files, because this is becoming really tedious!
Thanks

Well, first of all, it seems to me that you are creating a lot of extra work for yourself by creating your NEF and a JPEG. If any adjustments have to be done then you have to apply to those adjustments to two different images rather than just one. I think it's going a little far, personally, to have a JPEG copy of every image "just in case" you need to send out a JPEG. Why not just create a JPEG from the NEF file when you need one? But it's your workflow and you can do what ever you want.
Yes, I realize my second suggestion didn't solve the problem. But the problem cannot be solved with Bridge, at least the way it is right now. You have to select the images that you want rated. It just seems to me that your are compounding your work by creating both images all the time. If you have a certain need where you need to produce JPEG images in a hurry for someone, I can understand using the feature. But when it is so easy to create JPEG images that have all of the adjustments, I don't understand the need to have a duplicate JPEG of every image. Again, it's your workflow.
You might speed things up a little bit by going into your Bridge preferences and fix it so that you don't have to hold the control key when applying star ratings. Then you can just hit the number and then the arrow keys to move to the next one.
Another very simple method of creating JPEG copies is to use either the Image Processor or Dr. Brown's 1-2-3 processor, which is a free download from his website. Again, I just think you are creating a lot of work for yourself by having JPEG copies of every image. Unless you are an absolute masterful photographer who never has to make any adjustments to your images, you are doubling the amount of postprocessing required. I promise, I won't interfere in this one anymore.

Why is command code showing for individual song, rating and review, related?

This weeks version of iTunes store is showing command code on individual album, song selection for song, rating and review, related and record label.

I would think it is a bug at the iTunes Store end. Essentially you are looking at web pages in the itunes store.

Is it possible to sort my library by both "Rating" AND "Last Played?"

I have been transferring my music digitally since 5 years before iTunes ever existed. I have just finally developed a rating system that I will be able to benefit from. So, I want go though almost two decades worth of my music, and rate all these songs.
I'd like to rate my songs which I've never listened to, while listening to them. Once rated, I don't want to hear the song again until I've rated all songs.
The problem arises because I can't efficiently just shuffle my music and rate, because iTunes will more commonly play my already-rated songs. Even if shuffle was actually random (like it used to be) I'd still have music that would remain unrated before I started getting repeats of the rated ones.
This can not be accomplished with a smart playlist either, because finding only 'unrated' and 'never played' songs will remove the song as soon as I rate it, and stop playing all music in my library. I considered [unshuffled] column-sorting by rating in a smart playlist that only finds songs with a play count of 0; this allows me to start playing the first 0 song in the full list of 0's, but the moment I rate it, it jumps up with the rated songs I've already rated, and continues to play the next track from it's new position.
Ideally, I'd like to [column] sort by Last Played FIRST, and see all the unplayed ones at the top of the list, THEN sort by rating, and view unrated ones reshuffled to the top of that list. But iTunes won't seem to sort in this manner. In other words, It won't re-sort an already-sorted column.
If the rules of my sorting system would help you understand what I'm trying to do, they are included below.
STAGE ONE (what I'm trying to find an efficient process for)
★ - DELETE
★★ - SONG NOT PREFERABLE
★★★ - LISTENED/KEEPING
★★★★ - KNOWN, LIKED SONG
★★★★★ - NEW, LIKED SONG
STAGE TWO
Delete all ★ songs.
Decrease rating of all ★★★★, ★★★ and ★★ remaining songs by ★
[example: select all ★★★ star songs and mass-edit track info and change to ★★ star songs]
New Status:
★ - SONG NOT PREFERABLE
★★ - LISTENED/KEEPING
★★★ - KNOWN, LIKED SONG
★★★★★ - [ BECOMES: ] RE-EVALUTE SONG (since I've only heard it once, after all)
Once I've reevaluated all the songs that are new to me, the ★★★★ category will be reserved for my most favorite songs at the moment.
And all ★★★★★ star ratings will continue to be songs I still need to give some time to before I decide whether I like hearing them or not.
Any ideas would be greatly appreciated!
I know this may seem like overkill, but if I could implement this rating system, I could listen to my music with way less skipping. I'm not going to start deleting songs from complete albums, but I don't need to listen to it if I am not into it. Sometimes a song will be perfect as part of an album, but it's not a jam you're interested in hearing anymore otherwise. Doug's Rate Me! Script doesn't work under my listening habits.

I would like to extend also the guest network. Is this possible with a 2nd generation dual band AP express?
Yes it is, if you have updated your Mac to use AirPort Utility 6.2 and both the AirPort Extreme and AirPort Express have been updated to use version 7.6.3 firmware.

Printing cards and labels on Photosmart C4580 printer

I couldn't find my particular problem using the search so I'm hoping for some answers here. I have a Photosmart C4580 printer connected to a Toshiba laptop running Vista with all the current updates. My problem is that I can't seem to get it to print on business card stock or addrress label stock. Here's the issue:
I use Word to create business cards to print onto business card stock. The instructions that came with the card stock say to do a test page on regular paper first to verify placement, which I do - everything looks perfect so I put a page of card stock in the feeder. The printer grabs the page and prints with the image offset towards the top of the page by about 1/4" so that the top of the card is above the edge of the cards. As the cards are repeated down the page, it shifts down slightly so that by the time it gets to the bottom of the page it's almost on the card, but still overlaps the top edge slightly. Printing onto regular paper works perfectly every time.
A similar thing happens printing address labels - again using Word to create the labels for either Avery 5267 or Avery 8161 label stock. On regular paper everything looks perfect, but feed a sheet of label stock in and the text is offest toward the top of the page. The last time I needed labels I was able to get it to print properly by printing one label at a time, then refeeding the page and printing the next one, then repeating until each label on the page was printed. When you're printing several pages of labels that takes a lot of time!
Is there something I need to do to get this printer to print cards and labels?
Alan Hepburn
Alan Hepburn
Proud to be a Blue Star Family

@ deblois 1089 - I will need a little more information to help out. What are the specifications of the labels? Do you have the measurements and the weight of the paper type? Thanks
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

What's the difference between tags and labels?

What's the difference between message tags and labels?
Solved!
Go to Solution.

Indeed tags are freeform and can be added and created by anyone. Labels follow a stricter hierarchy and are usually defined on the individual community level (e.g. per ideation section, or specific to a discussion board).
Labels are used as a filter by the community team to more easily look at specific sub-sections of content.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Rating and Labels

Similar Messages

Maybe you are looking for