Rating / Label "Buttons" active, although not shown in Grid View

While I was investigating the reason for JPEG images being written back with no obvious changes applied to them (see also How to filter on Metadata Status "Has been changed"?) I noticed something I think is a bug:
Becaus it sometimes happened to me that I unintentially changed the rating for a picture because I wanted to click into the frame of an image to select it as the only image, I have set my Library View Options as follows for Compact Cell Extras (for a better description also see Grid View: Flags, Rating, Color Label read only? / Mark Images Read only?):
Index Number checked
Top Label checked with File Name
Rotation unchecked
Bottom Label unchecked with Rating and Label
Now, if I click into the area, where rating or color label would show (if shown), the rating of the images changes. So I am clicking on an option I don't even see ...
This was one of the reasons, why metadata in pictures sometimes  would get updated without me knowing why. Anybody else who has experienced this behaviour?
Beat Gossweiler
Switzerland
P.S: My workaround now is to have Common Photo Settings shown in the bottom label.

Yes it's a bug. I see it on Mac platform.

Similar Messages

  • Button Images are not shown

    Dear All,
    In one of our test instance, some button images are not shown, whereas some are.
    They are shown as grey button.
    I searched metalink, according to them patch 1238573 should be installed, which is already installed.
    What could be the reason?
    Also, is there any way to find out which images are missing?
    Regards,
    Ashish Shah

    Hi
    I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
    The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
    That should do the trick!
    Regards
    Tim

  • "Search for" results not shown in list view

    Hello,
    I just installed Leopard a few days ago, and so far I'm very happy.
    The ony oddity I noticed today was that "Search for" results (the default searches in the pane on the left side) are not shown in list view.
    What happens is this:
    - I open a finder window in list view.
    - I click e.g. on "Search for" - "All documents".
    - The status bar on the bottom of the finder window says e.g. "1789 objects", but the actual window is empty (although it has a very long scrollbar). If I click somewhere in the empty space, info for an actual file is shown - as if the files were there, just shown in white letters on white background. I can also type in the search field, and the status bar updates accordingly, but again, no files show up.
    Icon and Coverflow views, however, do work.
    - If I switch from Icon to List view, a file list is shown for the fraction of a second, then disappears.
    This is not an end-of-the-world-bug for me, but still pretty annoying.
    Any idea what might be the problem here? I have no exotic software installed that could cause trouble; just QuickSilver and the usual productivity apps.
    Thanks!

    The problem disappeared a few launches later . ..

  • Documents or images are not shown in document viewer properly.

    Hi Friends,
    we are using sap ecc6.0 release 700.we have implemented document viewer functionality to one of our application.we have Adobe in our system.some times documets(pdfs) are shown properly in document viewer.but some times documents are not open in document viewer.in this case if restart the work station PC ,document viewer working properly.so we have to know any ways to correct the bug without restart the workstation PC.
    please suggest any ways to correct it.

    Hi Venkat,
    i am not sure about it, but lets a try ask to your basis consultant for the latest gui .i.e. 7.3 with patch level 8, use the latest GUI and then see , is still you are getting those problems, please revert with your answer.

  • Labels on Forms are not maintaining positions when viewed on a different computer

    I have a project with 14 forms.  The labels for the text boxes are perfectly aligned on one machine, yet when I run the project on a different machine (same screen resolution and all fonts available) many of the labels are no longer left- or right-aligned
    as designed.  I have experimented with changing the Autoresize settings (using Font, DPI, etc.) for the forms as well as the text alignment settings for the labels themselves, but they don't fix the problem.  I am using Visual Basic (Net 4.5) in
    Visual Studio 2013. Any ideas??

    Hi DrDon81,
    According to your description, the labels on forms are not maintaining positions in different machines.
    I suggest you disable the AutoSize(set to false).
    Or you could put the label in a panel or similar, then use Dock instead of just Anchor property.
    If it still not working, you could share a little sample which can reproduce the issue. we could help you better.
    Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • After reopening dreamweaver files, the table and its contents are not shown in design view

    I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view.  I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
    I've already done my research everywhere, but cannot find solution.

    Thank you so much... it works...
    I should come here earlier... wasted lots of time !! 

  • File name not showing in grid view

    I just upgraded to LR 5.4 and I noticed that now when I am in grid view, only the capture date and dimensions show on the image when I run my cursor over it. I used to get a quick pop-up with the file name, capture date & dimensions, so I can quickly see where I am in my numbering system. I have looked at the preferences and also in view, but it is not apparent to me where it went, plus I know I didn't change anything, intentionally.
    BTW, I also upgraded to Mavericks OS on my iMac, but I hope that is not what is wrong. I know Adobe put out a bunch of "patches" for Bridge, etc. but I have already downloaded and updated all that.

    When you are in Library module/Grid mode, the text that appears in the hovering action is controlled by the Info Overlay. The Info Overlay has three states: Off, Info 1 and Info 2.
    Go to View>Loupe Overlay and put a check mark next to the Overlay you wish to be active and your hovering enabled text will change to match that text. 

  • Scroll Bar not functioning in Grid View with All Photographs selected

    LR 4.3 on Windows 7
    I can scroll through a bunch of photos while in grid view with the right side slider when I am looking at a folder with 15,000 images or less, but when I click the All Photographs, there is no little slider button. The slider tray is visible, but no button to drag. The catalog has 180,000 images now. Any suggestions would be appreciated.
    I tried using a text search within my All Photographs which brought up 71,000 images. The slider showed up fine with that many images.
    M. Jackson

    Okay, I will answer my own question in case anyone else sees the problem.
    When I am viewing my large catalog with only three thumbnails across in LR, I lose the little button to slide up and down. When I change Grid View to show four or more thumbnails, the button reappears. I'd suggest this is a bug needing fixing.

  • Album art shown in grid view

    In the new grid view which shows the album art for artists, is there a way to set the image shown for the artist, like you press space to choose the picture shown in iPhoto?
    It's annoying at the moment becasue I use it in artist mode but some artists with more than one album show the image for a compilation that they are on rather than one of their albums. Eg, under Coldplay, the artwork shown is a Now album, rather than say Viva la vida. Can I change the album shown as the main image?
    Thanks

    Ok, I've been playing around with iTunes 8 and have found the answer myself. If when in Grid view with more than the one album for the artist, show the album art required and right click and choose Set Default Album Artwork and it will change it to this. Alternatively choose Get Info whilst on the grid view and it will allow you to paste an artwork in here which it will use as a default.
    Hope this helps anyone else wanting to do a similar thing!

  • Some images not selectable in grid view

    Have recently installed Lightroom 5.6 on my Mac after deciding to ditch Apple Aperture.  I have an issue where certain images are not selectable or do not highlight when moving the mouse pointer over them in grid view in the library module.  The images have been imported only once direct from the camera & there is no issue selecting them in the filmstrip or accessing them in the Finder.  I've found other posts with users experiencing similar issues but no one has offered an answer

    Um, I can't seem to find it on the server, which can't be a good sign ) - :
    Have no idea why it's not appearing where it should but if I can get a link to work I'll send it to you.
    Thanks for your help

  • Trophy:Back button activation area not as wide?

    i dont know if its supposed to be designed this way but with my back button i have to push the screen/button about 1mm from the left side of that arrow. but with the search button i can push/activate from the area about 3mm on the right of the image. testing it from the sides of the screen it seems like the search button has a wider activation area. is yours like that too?

    today i tried the phones in two of my local vzw stores and the area you have to press is similar to my phone. the area you need to push the back button is farther from the left compared to the right with the search button. i wont be able to get a replacement for my current trophy yet. (gotta call #611 later)(for that high pitch tone when the screen is on (i got a post about my issue in the forums))

  • Flashplayer10 afcs.swc, components not shown in Design view

    Hi,
    When I use the FlashPlayer10 swc nothing is shown in the Design View.
    Is that bug ? isn't it just not working here ?

    Hi, could you please try the followijg code and tell me if you can see the visual components in design view.
    Make sure you try it with afcs.swc for Player 10 and Compiler set to 10.0.0
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:rtc="AfcsNameSpace">
         <mx:RemoteObject showBusyCursor="true"
              id = "afcsService"  
              destination = "afcsChat">
              <mx:method name="afcsAuth" result="afcsAuthResult(event)"/>
         </mx:RemoteObject>
         <mx:Script>
              <![CDATA[
                import mx.rpc.events.ResultEvent;
                private function getToken():void{
                     afcsService.afcsAuth();
                private function afcsAuthResult(e:ResultEvent):void{
                     auth.authenticationKey = String(e.result);
                      session.login();
              ]]>
         </mx:Script>
         <mx:Button x="10" y="10" label="Login" click="getToken()"/>
         <rtc:AdobeHSAuthenticator id="auth" />
         <rtc:ConnectSessionContainer autoLogin="false" id="session" width="100%" height="100%"
              authenticator="{auth}"
              roomURL="http://connectnow.acrobat.com/whomzour/videochat">
              <rtc:SimpleChat width="363" height="151"  x="10" y="291"/>
              <rtc:WebCamera width="361.5" height="235"  y="48" x="10"/>
              <rtc:AudioPublisher />
              <mx:List dataProvider="{session.userManager.userCollection}"
                      labelField="displayName"  x="379.5" y="48" height="394" width="155"/>
         </rtc:ConnectSessionContainer>
    </mx:Application>

  • Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

    Dear,
    I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
    The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
    Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
    I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
    Is there any way for me to fix this problem? Please help!
    Otherwise i will need to use other software for music playing.
    Regard,

    Refer this article
    The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
    http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Times not shown in weekly view

    My iCal always used to show the times within the weekly blue "event" rectangles, but these seem to have disappeared recently. The events are still in the right place and given in the extended panel.
    How do I get these times back in the main display, please?
    The preferences allow for showing times in monthly view but not in weekly.
    MacOSX 10.4.9, iCal 2.0.5

    Hi John,
    You should be able to set iCal so you can see the start times in month view. I can't remember exactly what it says in 10.3, but go to the iCal menu then Preferences and it should be in there.
    Best wishes
    John M

  • Times of events not shown in month view

    I'm thinking about using iCal instead of the calendar i've been using, but I find that it has what seems to be a serious drawback: In the month view, the times of the events are not listed. How do you deal with this? Does it present a problem?

    Hi John,
    You should be able to set iCal so you can see the start times in month view. I can't remember exactly what it says in 10.3, but go to the iCal menu then Preferences and it should be in there.
    Best wishes
    John M

Maybe you are looking for